993 resultados para SAM


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The jurisdiction of Australian courts to make wills for those lacking testamentary capacity is relatively new, having been granted by legislation progressively enacted across the various states and territories between 1996 and 2010. Given increasing numbers of statutory will applications since the legislative reform, and a growing body of law, the publication of the specialist work, Statutory Will Applications: A Practical Guide, by Richard Williams and Sam McCullough, is timely and valuable. This work will be of great interest to those who act for individual clients, especially wills and estates practitioners, but also personal injury practitioners acting for incapacitated persons who have been awarded substantial damages.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Although UK courts have, for many years, had power to make wills for those lacking testamentary capacity, this jurisdiction jurisdiction is relatively new in Australia, having been granted by legislation enacted between 1996 and 2010.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In my master’s thesis I analyse mystical Islamic poetry in ritualistic performance context, samā` , focusing on the poetry used by the Chishti Sufis. The work is based on both literary sources and ethnographic material collected in India. The central textual source is Surūd-i Rūhānī, a compilation of mystical poetry. Textual sources, however, can be understood properly only in relation to the living performance context and therefore I also utilise interviews of Sufis and performers of mystical music and recordings of samā` assemblies along with texts. First part of the thesis concentrates on thematic overview of the poems and the process of selecting a suitable text for performance. The poems are written in three languages, viz. in Persian, Urdu and Hindi. Among the authors are both Sufis and non-Sufis. The poems, mystical and non-mystical alike, share the same poetic images and they acquire a mystical meaning when they are set to qawwali music and performed in samā` assemblies. My work includes several translations of verses not previously translated. Latter part of the thesis analyses the musical idiom of qawwali and the ways in which the impact of text on listeners is intensified in performance. Typically the intensification is accomplished in the level of a single poem through three different techniques: using introductory verses, inserting verses between the verses of the main poem and repeating individual units of text. The former two techniques are tied to creating a mystical state in the listeners while the latter aims at sustaining it. It is customary that a listener enraptured by mystical experience offers a monetary contribution to the performers. Thus, intensification of the text’s impact aims at enabling the listeners to experience mystical states.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Substitutional self-assembly of thiol and selenol SAMs from a lying-down phase of butanedithiol (C4DT) (SAM) were investigated using thiols, disulfide, and diselenide molecules. The intent was to address the question if formation of a lying-down dithiol phase is an impediment to formation of standing-up dithiol phases as it has been assumed. It is demonstrated that this is not the case, and the C4DT SAM, where both the sulfur atoms are chemisorbed on gold, is removed and replaced in all cases. Differences in substitution kinetics are observed.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A self-assembled monolayer of octadecyltrichlorosilane (OTS) was prepared on a single-crystal silicon wafer (111) and its tribological properties were examined with a one-way reciprocating tribometer. The worn surfaces and transfer film on the counterface were analyzed by means of scanning electron microscopy and X-ray photoelectron spectroscopy. The results show that, due to the wear of the OTS monolayer and the formation of the transfer film on the counterpart ball, the friction coefficient gradually increases from 0.06 to 0.13 with increasing sliding cycles and then keeps stable at a normal load of 0.5N. The transfer film is characterized by deposition, accumulation, and spalling at extended test duration. Though low friction coefficients of the monolayer in sliding against steel or ceramic counterfaces are recorded, poor load-carrying capacity and antiwear ability are also shown. Moreover, the monolayer itself or the corresponding transfer film on the counterface fails to lubricate even at a normal load of 1.0 N. Thus, the self-assembled monolayer of octadecyltrichlorosilane can be a potential boundary lubricant only at very low loads.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

研究细胞和表面相互作用具有重要意义 ,利用长链的烷硫醇在金表面或烷基硅烷在羟基化表面形成的自组装单分子层及其微格式化的表面允许以分子水平研究并控制细胞和表面的相互作用。我们概述了自组装单分子层及其格式化表面研究细胞和表面相互作用的最新进展

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Santamaría, José Miguel; Pajares, Eterio; Olsen, Vickie; Merino, Raquel; Eguíluz, Federico (eds.)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The effects of the molecular weight of polystyrene (PS) component on the phase separation of PS/poly(4-vinylpyridine) (PS/P4VP) blend films on homogeneous alkanethiol self-assembled monolayer (SAM) and heterogeneous SAM/Au substrates have been investigated by means of atomic force microscopy (AFM). For the PS (22.4k)/P4VP (60k) system, owing to the molecular weight of PS component is relatively small, the well-aligned PS and P4VP stripes with good thermal stability are directed by the patterned SAM/Au surfaces. With the increase of the molecular weight of PS component (for the PS (582k)/P4VP (60k) system), the diffusion of P4VP is hindered by the high viscosity of PS during the fast spin-coating process. The phase separation behavior of PS/P4VP on the SAM/Au patterned substrates is similar to that on the homoueneous SAM and cannot be easily directed by the patterned SAM surfaces even though the characteristic length of the lateral domain morphology is commensurate with the stripe width.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

An inherently disorganized self-assembled monolayer (SAM) of 2-mercapto-3-n-octylthiophene (MOT) has been formed on a gold bead electrode from its dilute ethanolic solution. The disorganization of the monolayer is attributed to the loose packing of the aliphatic chains of the MOT adsorbates, which results from a large difference in dimension/or cross-sectional area between the head (thiophene thiolate) and the tail (alkane chain) groups. Electrochemical measurements including ac impedance spectroscopy and metal underpotential deposition have shown that the monolayer is almost pinhole free. However, the MOT SAM can be penetrated by an organic probe molecule with affinity for the alkane chain part of the monolayer. Some typical probe molecules with different size and hydrophilicity have been employed to assess the permselectivity of the monolayer. Measurement results demonstrate that the ability of the employed probe molecules to penetrate into the monoalyer is mainly dominated by their hydrophilicity/or hydrophobicity. The results presented here suggest the potential application of MOT monoalyer to effectively modify the electrode surface for several research areas such as electrochemical sensors, electrocatalysis, electroanalysis, and supported hybrid bilayer membranes.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A self-assembled monolayer (SAM) of 3-mercaptopropionic acid (HSCH2CH2COOH) was formed on a gold electrode. The effect of the charge of the end group on the electrochemical response of Fe(CN)(6)(3-) at the SAM modified electrode was studied by using cyclic voltammetry. At high pH, when the -COOH groups are dissociated, Fe(CN)(6)(3-) current is suppressed; as the solution pH is lowered, Fe(CN)(6)(3-) current increases. The electrochemical titration curve was obtained by correlating the currents to the different electrolyte pH values, from which the surface pK(a) was obtained to be 5.2+/-0.1. Furthermore, a calculation equation was presented to simulate the electrochemical titration. As comparison, the surface pK(a) was also measured by contact angle titration as 5.6+/-0.1. The surface pK(a) values determined by the two methods in our work are consistent and accurate.