Comparison of Round and Square Cores in the Determination of Beef Tenderness by Warner- Bratzler and Instron

Seven rib-eye rolls, lip on (112A), were each cut into eight 2.54 centimeter thick steaks starting from the blade end. Steaks were randomly assigned to one of four treatment groups; 1) round versus square cores using Instron [inst1], 2) round versus square cores using Warner- Bratzler [inst2], 3) Instron versus Warner-Bratzler using round cores [rdsq1], and 4) Instron versus Warner- Bratzler using square cores [rdsq2]. Subsequently, steaks from each group were broiled in a General Electric industrial broiler grill to an internal temperature of 63 §C. Steaks were held overnight at 2 §C. Two steaks from each rib were placed into each instrument/core treatment group. Steaks were then divided into three sections identified as: a) lateral, b) medial, and c) central. Three 1.27 centimeter cores from each section were taken from each steak for a total of nine cores per steak and sheared once through the center. The results indicated that there was a significant difference ( p> .05) between round and square cores for both Warner- Bratzler and Instron. In all mean groups tested, square cores had higher shear values than did round cores. There was no indication of differences between instruments, and no significant interactions between instruments and core types.

Musical pastime; a new collection of popular melodies, arranged as duets for the violin and piano. Consisting of the latest and best marches, galops, waltzes. polkas, round and square dances &c. Together with a choice selection of solos upon classical airs, arranged for amateurs.

Mode of access: Internet.

Banner folio; for violin and piano, containing the most popular melodies of the day, introducing selections, variations, medleys, round and square dances, &c. All arranged in an easy manner for amateurs.

"This book will answer for the Flute and Piano, also for the C. Clarinet and Piano."--t.p.

Economic efficiency of two baling systems for sugarcane straw

In recent years, harvesting process of sugarcane is changing itself, passing through semi-mechanized for mechanized system, who, currently predominate in Sao Paulo state, Brazil. Mechanized harvesting consists in a sequence of operations which includes cutting the pointer and chopping the stalk. The straw is a harvesting residue, and it stays in the ground, piling up above soil, with a possible prejudice for crop yield. An economic way to retract this straw is using mechanized processing for bailing it, involving hay balers, which are imported to Brazil and their use require regularly field conditions of work. Those balers could produce square or round bales, which can be sold to energy generation. This study aims to estimate economic efficiency indicators of round and square systems for sugarcane straw, establishing a relationship between baling costs and the incoming generated from those bales. Based on data set, round baling system was 26% more efficient than square baling system, and that round baler has a lower purchase price and a higher compress ratio of biomass, allowing a greater potential for power generation, turning it a more advantageous in a possible marketing for bales produced. (C) 2014 Elsevier B.V. All rights reserved.

Round scallops and square meshes: a comparison of four codend types on the catch rates of target species and by-catch in the Queensland (Australia) saucer scallop (Amusium balloti) trawl fishery

Concern over the amount of by-catch from benthic trawl fisheries and research into the problem have increased in recent years. The present paper demonstrated that by-catch rates in the Queensland (Australia) saucer scallop (Amusium balloti) trawl fishery can be reduced by 77% (by weight) using nets fitted with a turtle excluder device (TED) and a square-mesh codend, compared with a standard diamond-mesh codend with no TED. This large reduction was achieved with no significant effect on the legal size scallop catch rate and 39% fewer undersize scallops were caught. In total, 382 taxa were recorded in the by-catch, which was dominated by sponges, portunid crabs, small demersal and benthic fish (e.g. leatherjackets, stingerfish, bearded ghouls, nemipterids, longspine emperors, lizard fish, triggerfish, flounders and rabbitfish), elasmobranchs (e.g. mainly rays) and invertebrates (e.g. sea stars, sea urchins, sea cucumbers and bivalve molluscs). Extremely high reductions in catch rate (i.e. ≥85%) were demonstrated for several by-catch species owing to the square-mesh codend. Square-mesh codends show potential as a means of greatly reducing by-catch and lowering the incidental capture and mortality of undersize scallops and Moreton Bay bugs (Thenus australiensis) in this fishery

Flowfield analysis of a linear clustered plug nozzle with round-to-square modules

The plug nozzle is one of the advanced expansion devices proposed to improve the overall performance of launcher liquid rocket engines. The present work investigates the three-dimensional flow field generated on this kind of nozzle by partitioning the primary nozzle into modules. A linear plug nozzle has been designed together with modules having two different geometries: a rectangular cross section and round-to-square module. Numerical simulations have been carried out considering the case where all modules of the primary nozzle are active and the case where one module is turned off. The solutions are compared and specific three-dimensional flow structures taking place inside the modules and on the plug are identified. The relationship between these structures and the skin friction distribution within the module and along the plug surface is investigated. Finally, the effect on performance of these three-dimensional flow features is emphasized. © 2006 Elsevier Masson SAS. All rights reserved.

Mechanical behavior of circular and square concrete filled steel tube stub columns under local compression

This paper presents a combined experimental and numerical study on the behaviour of both circular and square concrete-filled steel tube (CFT) stub columns under local compression. Twelve circular and eight square CFT stub columns were tested to study their bearing capacity and the key influential parameters. A 3D finite element model was established for simulation and parametric study to investigate the structural behaviour of the stub columns. The numerical results agreed well with the experimental results. In addition, analytical formulas were proposed to calculate the load bearing capacity of CFT stub columns under local compression.

Laterally structured ripple and square phases with one and two dimensional thickness modulations in a model bilayer system

Molecular dynamics simulations of bilayers in a surfactant/co-surfactant/water system with explicit solvent molecules show formation of topologically distinct gel phases depending upon the bilayer composition. At low temperatures, the bilayers transform from the tilted gel phase, L beta', to the one dimensional (1D) rippled, P beta' phase as the surfactant concentration is increased. More interestingly, we observe a two dimensional (2D) square phase at higher surfactant concentration which, upon heating, transforms to the gel L beta' phase. The thickness modulations in the 1D rippled and square phases are asymmetric in two surfactant leaflets and the bilayer thickness varies by a factor of similar to 2 between maximum and minimum. The 1D ripple consists of a thinner interdigitated region of smaller extent alternating with a thicker non-interdigitated region. The 2D ripple phase is made up of two superimposed square lattices of maximum and minimum thicknesses with molecules of high tilt forming a square lattice translated from the lattice formed with the thickness minima. Using Voronoi diagrams we analyze the intricate interplay between the area-per-head-group, height modulations and chain tilt for the different ripple symmetries. Our simulations indicate that composition plays an important role in controlling the formation of low temperature gel phase symmetries and rippling accommodates the increased area-per-head-group of the surfactant molecules.

Year-round and rotational freshwater prawn, Macrobrachium rosenbergii and paddy farming: soil quality, production and economics

A study was carried out at five upazillas (Dumuria, Fakirhat, Pirojpur sadar, Gopalgonj sadar and Kalia) of five southern districts of Khulna, Bagerhat, Pirojpur, Gopalgonj and Narail to understand the comparative production performance and any effect on soil quality in case of year-round golda (Macrobrachium rosenbergii), alternate prawn-paddy and year-round paddy farming. A direct interview of 55 farmers was taken, using pretested questionnaire, and soil samples were taken from selected farms before and after each crop. Among the five upazillas, farmers in Gopalgonj sadar and Kalia are not practicing year-round golda. Rotational golda-paddy farming has been recorded to result in maximum profit, with the highest of Tk. 310,912/ha/year in 2003 at Dumuria. Only paddy farming is less profitable than other two cropping patterns, irrespective of study sites. The nutrient status of soil in rotational golda and paddy farming has been found improved, compared to that of only golda or paddy farming.

Equilateral-Triangle and Square Resonator Semiconductor Microlasers

The characteristics of equilateral-triangle resonator (ETR) and square resonator microlasers are reported, which are potential light sources in the photonic integrations. Based on the numerical simulations, we find that high-efficiency directional emission can be achieved for the triangle and square microlasers by directly connecting an output waveguide to the resonators. The electrically injected InP/InGaAsP ETR and square resonator microlasers with a 2-mu m-wide output waveguide were fabricated by standard photolithography and inductively coupled plasma etching techniques. Room-temperature continuous-wave (CW) operations were achieved for the ETR microlasers with the side length from 10 to 30 mu m and the square resonator microlasers with the side length of 20 mu m. The output power versus CW injection current and the laser spectra are presented for an ETR microlaser up to 310 K and a square resonator microlaser to 305 K. The lasing spectra with mode wavelength intervals as that of whispering-gallery-type modes and Fabry-Perot modes are observed for two square lasers, which can lase at low temperature and room temperature, respectively.

Characteristics of triangle and square InP/InGaAsP microlasers

Directional emission triangle and square InGaAsP/InP lasers have been fabricated by standard photolithography, inductively coupled plasma etching technique combined with wet chemical etching process. In this article, the characteristics of the microcavity lasers are presented. For an equilateral triangle microcavity laser with the side length of 30 mu m, we got the laser spectra fitted very well with the mode wavelength formulate LIP to the 8(th) transverse mode at room temperature. But the laser spectra are usually more complex than the formulae for the lasers, especially for the lasers with a smaller side length. For a square microcavity laser with side length of 20 mu m, we observed the mode competition between the Fabry-Perot (FP) modes and Whispering-Gallery (WG) modes at 200K. The output spectra below the threshold have the mode interval of FP modes with a large mode interval, and the laser spectra agree very well with the WG modes, which have mode interval less than the FP modes. The output spectra are dominated by the FP modes below the threshold, because the FP modes have a higher output coupling efficiency than the WG modes.

Analysis of output coupling efficiencies for directional emission triangle and square microlasers

Output coupling efficiencies are analyzed for triangular and square microlasers connected with an output waveguide by FDTD simulation. The results show that square resonator with an output waveguide connected to the midpoint of one side can have high output coupling efficiency and a good mode selection.

Ac voltammetric and square wave voltammetric study of the self-assembled monolayers of thiol-functionalized viologen derivative

Electroactive self-assembled monolayers (SAMs) containing viologen group are formed through the adsorption of thiol-functionalized viologen compound CH3(CH2)(9)V2+(CH2)(8)SH, where V2+ is N,N'-dialkylbipyridinium (i.e. a viologen group), onto gold electrodes from methanol/water solution and its electrochemical behavior is investigated ty Ac voltammetry and square wave voltammetry, which have the high sensitivity against background charging. The viologen SAM formed is a sub-monolayer and the normal potentials corresponding to the two successive one-electron transfer processes of the active centers (viologen) are -360 mV and -750 mV (vs. Ag/AgCl) in 0.1 mol/L phosphate buffer solutions (pH 6.96) respectively, and the standard electron transfer rate constant is 9.0 s(-1). The electrochemical behavior of this SAM in various solutions has been preliminarily discussed.

High performance VLSI architecture for division and square root

A novel high performance bit parallel architecture to perform square root and division is proposed. Relevant VLSI design issues have been addressed. By employing redundant arithmetic and a semisystolic schedule, the throughput has been made independent of the size of the array.