Current speculation in costing approach for Malaysian residential construction

The construction industry has been under pressure for many years to produce economical buildings which offer value for money, not only during the construction phase, but more importantly, during the full life of the building. Whole Life Cycle Costing (WLCC) is a relatively new concept for the construction industry especially on residential development and particularly for Malaysia. Discussing the speculation in using WLCC for the Malaysian residential constructions is the aim for this paper and it is one of the research questions on my research. This paper also wants to gather more speculation that may involve through others experienced. Basically, this paper is written to facilitate the current or future individual which will involve in residential property development sector with a new sensible approach to what at times seems impressively confusing especially in simplifying the operations and maintenance services and rehabilitation as well.

Drivers of the accuracy of developers' early stage cost estimates in residential construction

Purpose – Preliminary cost estimates for construction projects are often the basis of financial feasibility and budgeting decisions in the early stages of planning and for effective project control, monitoring and execution. The purpose of this paper is to identify and better understand the cost drivers and factors that contribute to the accuracy of estimates in residential construction projects from the developers’ perspective. Design/methodology/approach – The paper uses a literature review to determine the drivers that affect the accuracy of developers’ early stage cost estimates and the factors influencing the construction costs of residential construction projects. It used cost variance data and other supporting documentation collected from two case study projects in South East Queensland, Australia, along with semi-structured interviews conducted with the practitioners involved. Findings – It is found that many cost drivers or factors of cost uncertainty identified in the literature for large-scale projects are not as apparent and relevant for developers’ small-scale residential construction projects. Specifically, the certainty and completeness of project-specific information, suitability of historical cost data, contingency allowances, methods of estimating and the estimator’s level of experience significantly affect the accuracy of cost estimates. Developers of small-scale residential projects use pre-established and suitably priced bills of quantities as the prime estimating method, which is considered to be the most efficient and accurate method for standard house designs. However, this method needs to be backed with the expertise and experience of the estimator. Originality/value – There is a lack of research on the accuracy of developers’ early stage cost estimates and the relevance and applicability of cost drivers and factors in the residential construction projects. This research has practical significance for improving the accuracy of such preliminary cost estimates.

Ventilation research on Australian residential construction

This paper applies established testing methods used to discover the ventilation performance of various residential building envelope construction in Australia. Under the definition of 'ventilation performance' we imply the building envelope leakage (or infiltration) the living space air change rates, the volumetric flow rates and the pathways of air flow between subfloor, room volume and roof spaces. All of the methods applied and discussed here are on-site, evidencebased performance of actual structures as tested by the Mobile Architecture & Built Environment Laboratory and Air Barrier Technologies.

Use of renewable building materials in residential construction : a review

The development of mass-produced environmentally-benign housing is one of the critical factors in the transition to global sustainability. Such housing will need to be constructed from renewable and/or recycled materials, be conditioned using minimal or no non—renewable energy, and be affordable. The universal need for such built environment resource stewardship is urgent. In developing countries, the requirement is to shelter growing populations, and in industrialised countries, there is a need for an alternative to the current resource and nergy-intensive material usage in housing. While there are some good surveys of building materials made from renewable resources, such as the BEDP Environment Design Guide Pro 11 by Gelder (2002), there does not appear to be a comprehensive database of these materials linked to abundant and reliable supply. This paper reviews the current availability and potential usage of renewable materials applicable to Australian mainstream residential construction. It concludes that the current state of publicly available information is dispersed and embedded in multiple sources with variance in detail, incomplete access and uncertain comparison across the sources.

Ventilation research on Australian residential construction

This paper applies established and new testing methods to discover the ventilation performance of various residential building envelope constructions in Australia. Under the definition of 'ventilation performance' we imply the building envelope leakage (or infiltration) of the living space air change rates, the volumetric flow rates and the pathways of air flow between subfloor, living and roof spaces. All of the methods applied and discussed here are on-site, evidence-based performance of actual structures as tested by the Mobile Architecture and Built Environment Laboratory and Air Barrier Technologies. The testing processes primarily involve the Tracer Gas Decay Method (TGDM) and rhe fan pressurisation method (FPM a.k.a 'blower door'). All the measurements are performed with respect to the external wind speed and direction as well as the typical weather parameters. This paper discusses the differences and similarities of both testing methods as well as several other testing procedures that can inform the researcher on air leakage pathways. Findings of a simultaneous TGDM and FPM air leakage rate comparison are also encountered in this paper. One of the most informative testing methods, is the application of three different tracer gasses introduced into different spaces (subfloor, living and roof) to discover pathways of air flow within residential construction.

Analysing the relationship between new housing supply and residential construction costs with the regional heterogeneities

New housing supply in Australia has been experiencing a low rate of increase in conjunction with a dramatic increase in residential construction costs since the 1990s. This study aims to estimate the relationship between new housing supply and residential construction costs with the regional heterogeneities. Based on a panel error correction model, it can be identified that there is a causal link as well as a significant correlation between new housing supply and construction costs in the Australian sub-national housing construction markets. The model developed in this research assists policy makers to better understand the nature of the supply side of the housing sector and then enact appropriate policies to improve the new housing supply in Australia.

New housing supply and residential construction costs in Australia : a panel ECM approach

The supply of new housing in Australia has been experiencing a low increase rate since the 1990s in conjunction with an increasingly strong housing demand. On the contrary, residential construction costs across Australia?s states maintained dramatic increases simultaneously. Economic theory suggests that new housing supply is correlated to the costs of residential constructions. However, few empirical studies have focused on examining this relationship for Australian housing markets. To comprehensively investigate the relationship between the supply of new housing and residential construction costs a function for new housing supply considering the effects of regional heterogeneities is introduced in this study. By estimating a panel error correction model (ECM) applicable for quantifying the correlation with regional heterogeneities, this research identifies that a causal link and a strong correlation exist in between new housing supply and residential construction costs in Australia.

Increasing the level of sustainability via off-site production : a study of the residential construction sector in China

Even though the use of off-site production in the construction process for residential buildings is seen as a viable means of increasing the level of sustainability with respects to its significant economic, environmental and social contributions, there have been very few studies to-date into off-site construction within the context of developing countries where the places have crucial demands for accommodations. Accordingly this research involves the rapidly growing developing nation, China, as a representative developing country with the objective to investigate the current status of off-site practices in the urban residential construction sector. This paper also examines the factors affecting demand for and potential barriers against a wider uptake of off-site technologies in China. The findings provide a rare insight into off-site construction in China’s housing industry and this information will be transferable to other developing countries. This study also contributes to a broader understanding about the off-site construction in developing from an international perspective.

Determinants of residential construction : a review of present knowledge /

"October 1959."

Lumber requirements for nonfarm residential construction /

"May 1939."

Development of Innovative Load Transfer Mechanism to Reduce Hurricane-Induced Failures in New and Existing Residential Construction

Implicit in current design practice of minimum uplift capacity, is the assumption that the connection's capacity is proportional to the number of fasteners per connection joint. This assumption may overestimate the capacity of joints by a factor of two or more and maybe the cause of connection failures in extreme wind events. The current research serves to modify the current practice by proposing a realistic relationship between the number of fasteners and the capacity of the joint. The research is also aimed at further development of non-intrusive continuous load path (CLP) connection system using Glass Fiber Reinforced Polymer (GFRP) and epoxy. Suitable designs were developed for stud to top plate and gable end connections and tests were performed to evaluate the ultimate load, creep and fatigue behavior. The objective was to determine the performance of the connections under simulated sustained hurricane conditions. The performance of the new connections was satisfactory.

Height and construction costs of residential buildings in Hong Kong and Shanghai

A widely recognised theme of construction economics suggests that the cost of construction per square metre increases as building height rises. However, after many years, research conducted regarding the height and cost issue have established a classic relationship between those two, well known as a U-shaped curve. This paper describes the study of height-cost relationship of high-rise residential buildings in Shanghai and Hong Kong. Initial findings indicated that the curved relationships of height-cost of residential buildings in Shanghai and Hong Kong exhibit different profiles. The differences suggest that, Hong Kong contractors have more expertise in multi-storey and high-rise construction than contractors in Shanghai. The dissimilarities also imply that different sets of criteria should be applied in the judgement of height affects cost in different locations. Many factors could be contributors, such as the history and experience in constructing residential high-rise buildings, location, linkage and relationships to the neighbourhood provinces, design and construction regulations, and government policy on residential construction.

High rise residential building quality : residents satisfaction survey

It is widely recognized that the quality of design is crucial to the success of the construction or production process and fairly minor changes in design can often result in giving major effects on the cost and efficiency of production and construction as well as on the usefulness, constructability and marketability of the product especially in developing high rise residential property development. The purpose of this study is to suggest a framework model for property manager, considering the sustainable and building quality of property development in high rise residential complex. This paper evaluates and ranks the importance, and frequency of the building quality factors that affect the sustainability and comfort of living for the resident in the selected high rise residential complex in Malaysia. A total of 500 respondents consisting of 20 property managers participated in this study. The respondents were asked to indicate how important each of building equipments in giving them the comfort of living in the selected high rise residential complex. The data were then subjected to the calculation of important indices which enabled the factors to be ranked. After that, a framework model will be developed to make sure all property managers will be guided to prepare their property for the resident to stay in the complex. Accordingly, the living satisfaction by the framework model plays a meaningful role in preparing and developing sustainable and good building quality in Malaysia high rise residential complex.