Chronic low back pain among French healthcare workers and prognostic factors of return to work (RTW): a non-randomized controlled trial

International audience

Effect of restricted feed intake on early reproductive development in Large White gilts

Forty-five Large White gilts were used to study the effect of energy intake from 28 to 176 d of age on body composition and reproductive development. From 28 to 60 d, the gilts were fed ad libitum a 16.6 MJ DE/kg, 24% crude protein and 1.3% total lysine diet. From 61 d of age three dietary treatments were used; 1) ad libitum access to feed (15.6 MJ DE/kg, 21% crude protein and 1.07% total lysine) (H), 2) feed offered at 75% (M) of the previous days intake of H, and 3) feed offered at 60% (L) of the previous days intake of H. ADG from 61 to 176 d of age was (p <0.05) affected by treatment. Although live weight at 176 d of age did not differ (p >0.1) the H gilts had higher (p <0.08) carcass weights than the M or L gilts. Back fat depths were similar (p >0.1) for all treatments at 115 d of age, however by 176 d of age M and H gilts were fatter (p <0.1) than L gilts. The mean lipid deposition (LD) from 115 to 176 d of age for L gilts (78.9 g/d) was less (p <0.05) than for M gilts (143.6 g/d) and H gilts (135.6 g/d). There were no differences between treatments for protein deposition (PD) over the same period. More (p <0.05) H gilts (n=8) attained puberty (first observed estrus) than either M gilts or L gilts (n=4 for both). Follicle numbers were similar (p >0.1) across treatments. For gilts that attained puberty, H gilts had fewer (p <0.05) follicles (13.5) than M gilts (19.7) and L gilts (21.3). For gilts with follicular development, H gilts had the heaviest (458.7 g) reproductive tract weight (RTW). However, for those that attained puberty, L gilts had the heaviest RTW. RTW were lowest for those with no follicular development. Energy restriction had a negative impact on puberty attainment, i.e. it took longer to reach puberty. However, for gilts that attained puberty, the number of follicles was greater for those on lower feed intakes. It would appear that rate of fat deposition, but not necessarily the total amount of fat, plays an important role in puberty attainment.

5

Musculoskeletal disorders (MSD) are the most prevalent pain disorders in industrialized countries, and their costs can represent up to 2% of gross national product. MSD are often work associated and recurrent and may lead to disability. In occupational health we are interested in the opposite process : in the return to work (RTW). Different models of disability and RTW exist with different conceptions of psychosocial factors. We therefore propose to analyze the influence of factors from work, patient, health care providers, and broader societal domains along the different phases of the MSD process, adopting a biopsychosocial approach. The analysis of risk factors for the different phases of MSD indicate that work stress factors have an impact on the occurrence of MSD and RTW with MSD, but their effect is low to moderate and nonspecific. Physical work demands, work place adaptation, and pain experience are much stronger predictors of RTW. Lack of modified or adapted work is one of the major factors that hinder RTW. The longer the pain lasts, the longer the patient is out of work, the more personal factors and broader context factors become dominant. There is a clear lack of RTW studies concerning neck and upper limb pain. MSD and especially chronic MSD should be viewed as public health concerns, implying a wider socio-economic and insurance and disability problem. Adequate medical support tailored to the different dimensions and phases of MSD must be on offer, and work accommodations must be promoted and supported.

The effect of recalled previous work environment on return to work after a rehabilitation program including vocational aspects for trauma patients.

INTRODUCTION: The aim of the present study was to assess the association between remembered previous work place environment and return to work (RTW) after hospitalisation in a rehabilitation hospital. METHODS: A cohort of 291 orthopedic trauma patients discharged from hospital between 15 December 2004 and 31 December 2005 was included in a study addressing quality of life and work-related questions. Remembered previous work environment was measured by Karasek's 31-item Job Content Questionnaire (JCQ), given to the patients during hospitalisation. Post-hospitalisation work status was assessed 3 months, 1, and 2 years after discharge, using a questionnaire sent to the ex-patients. Logistic regression models were used to test the role of four JCQ variables on RTW at each time point while controlling for relevant confounders. RESULTS: Subjects perceiving a higher physical demand were less likely to return to work 1 year after hospital discharge. Social support at work was positively associated with RTW at all time points. A high job strain appeared to be positively associated with RTW 1 year after rehabilitation, with limitations due to large confidence intervals. CONCLUSIONS: Perceptions of previous work environment may influence the probability of RTW. In a rehabilitation setting, efforts should be made to assess those perceptions and, if needed, interventions to modify them should be applied.

Self perceptions as predictors for return to work 2 years after rehabilitation in orthopedic trauma inpatients.

Purpose This study aimed to identify self-perception variables which may predict return to work (RTW) in orthopedic trauma patients 2 years after rehabilitation. Methods A prospective cohort investigated 1,207 orthopedic trauma inpatients, hospitalised in rehabilitation, clinics at admission, discharge, and 2 years after discharge. Information on potential predictors was obtained from self administered questionnaires. Multiple logistic regression models were applied. Results In the final model, a higher likelihood of RTW was predicted by: better general health and lower pain at admission; health and pain improvements during hospitalisation; lower impact of event (IES-R) avoidance behaviour score; higher IES-R hyperarousal score, higher SF-36 mental score and low perceived severity of the injury. Conclusion RTW is not only predicted by perceived health, pain and severity of the accident at the beginning of a rehabilitation program, but also by the changes in pain and health perceptions observed during hospitalisation.

Predicting Non Return to Work after Orthopaedic Trauma: The Wallis Occupational Rehabilitation RisK (WORRK) Model.

BACKGROUND: Workers with persistent disabilities after orthopaedic trauma may need occupational rehabilitation. Despite various risk profiles for non-return-to-work (non-RTW), there is no available predictive model. Moreover, injured workers may have various origins (immigrant workers), which may either affect their return to work or their eligibility for research purposes. The aim of this study was to develop and validate a predictive model that estimates the likelihood of non-RTW after occupational rehabilitation using predictors which do not rely on the worker's background. METHODS: Prospective cohort study (3177 participants, native (51%) and immigrant workers (49%)) with two samples: a) Development sample with patients from 2004 to 2007 with Full and Reduced Models, b) External validation of the Reduced Model with patients from 2008 to March 2010. We collected patients' data and biopsychosocial complexity with an observer rated interview (INTERMED). Non-RTW was assessed two years after discharge from the rehabilitation. Discrimination was assessed by the area under the receiver operating curve (AUC) and calibration was evaluated with a calibration plot. The model was reduced with random forests. RESULTS: At 2 years, the non-RTW status was known for 2462 patients (77.5% of the total sample). The prevalence of non-RTW was 50%. The full model (36 items) and the reduced model (19 items) had acceptable discrimination performance (AUC 0.75, 95% CI 0.72 to 0.78 and 0.74, 95% CI 0.71 to 0.76, respectively) and good calibration. For the validation model, the discrimination performance was acceptable (AUC 0.73; 95% CI 0.70 to 0.77) and calibration was also adequate. CONCLUSIONS: Non-RTW may be predicted with a simple model constructed with variables independent of the patient's education and language fluency. This model is useful for all kinds of trauma in order to adjust for case mix and it is applicable to vulnerable populations like immigrant workers.

Soil CO2 emission as related to incorporation of sugarcane crop residues and aggregate breaking after rotary tiller

Soil tillage is a process that accelerates soil organic matter decomposition transferring carbon to atmosphere, mainly in the CO2 form. In this study, the effect of rotary tillage on soil CO2 emission was investigated, including the presence of crop residues on the surface.Emissions were evaluated during 15 days after tillage in 3 plots: 1) non-tilled and without crop residues on soil surface (NTwo), 2) rotary tiller without the presence of crop residues on soil surface (RTwo), and 3) rotary tiller with the presence of crop residues in soil surface (RTw). Emissions from the RTw plot were higher than the other plots, (0.777 g CO2 m-2 h-1), with the lowest emissions recorded in the NTwo plot (0.414 g CO2 m-2 h-1). Total emission indicates that the difference of C-CO2 emitted to atmosphere corresponds to 3% of the total additional carbon in the crop residues in the RTw plot compared to RTwo. The increase in the RTwo emission in comparison to NTwo was followed by changes in the aggregate size distribution, especially those with average diameter lower than 2 mm. The increase in emission from the RTw plot in relation to RTwo was related to a decrease in crop residue mass on the surface, and its higher fragmentation and incorporation in soil. When the linear correlation between soil CO2 emission, and soil temperature and soil moisture is considered, only the RTw treatment showed significant correlation (p<0.05) with soil moisture.

L’incapacité au travail liée aux troubles musculosquelettiques : aspects théoriques et différences de genre

Introduction : Cette thèse est constituée de trois articles liés les uns aux autres. Le premier s’attache à clarifier les perspectives théoriques et problèmes conceptuels entourant la notion de capacité/incapacité au travail, sa définition et son évolution au fil du temps. Les deuxième et troisième articles visent à évaluer les effets différentiels selon le genre de déterminants du retour au travail (RAT) et de la durée d’indemnisation ainsi que les coûts associés, dans une population de travailleurs indemnisés à long terme pour troubles musculosquelettiques (TMS). Méthodes : Dans le premier article, une revue systématique des définitions de l’(in)capacité au travail et une analyse comparative basée sur la théorisation ancrée débouchent sur une carte conceptuelle intégrative. Dans le second article, une cohorte de 455 adultes en incapacité à long terme pour TMS au dos/cou/membres supérieurs est suivie cinq ans au travers d’entretiens structurés et de données d’indemnisation. Des modèles de Cox stratifiés par genre ont été utilisés pour évaluer la durée jusqu’au premier RAT. Dans le troisième article, une cohorte populationnelle de 13,073 hommes et 9032 femmes en incapacité prolongée pour TMS au dos/cou/membres supérieurs a été suivie pendant trois ans à l’aide de données administratives. Des modèles de Cox stratifiés par genre ont été utilisés pour étudier la durée d’indemnisation et détecter les effets dépendants du temps. Les coûts ont également été examinés. Résultats : Les définitions analysées dans la première étude ne reflètent pas une vision intégrée et partagée de l’(in)capacité au travail. Cependant, un consensus relatif semble émerger qu’il s’agit d’un concept relationnel, résultant de l’interaction de multiples dimensions aux niveaux individuel, organisationnel et sociétal. La seconde étude montre que malgré des courbes de survie jusqu’au RAT similaires entre hommes et femmes (p =0.920), plusieurs déterminants diffèrent selon le genre. Les femmes plus âgées (HR=0.734, par tranches de 10 ans), d’un statut économique perçu comme pauvre (HR=0.625), travaillant ≥40 heures/semaine en ayant des personnes à charge (HR=0.508) et ne connaissant pas l’existence d’un programme de santé et sécurité sur leur lieu de travail (HR=0.598) retournent moins vite au travail, tandis qu’un revenu brut annuel plus élevé (par $10,000) est un facteur facilitant (HR=1.225). Les hommes de plus de 55 ans (HR=0.458), au statut économique perçu comme pauvre (HR=0.653), travaillant ≥40 heures/semaine avec une charge de travail physique perçue élevée (HR=0.720) et une plus grande précarité d’emploi (HR=0.825) retournent moins rapidement au travail. La troisième étude a révélé que trois ans après la lésion, 12.3% des hommes et 7.3% des femmes étaient encore indemnisés, avec un ratio de coûts homme-femme pour l’ensemble des réclamations de 2.1 :1. L’effet de certain prédicteurs (e.g. revenu, siège de lésion, industrie) varie selon le genre. De plus, l’effet de l’âge chez les hommes et l’effet de l’historique d’indemnisation chez les femmes varient dans le temps. Conclusion : La façon de définir l’(in)capacité au travail a des implications importantes pour la recherche, l’indemnisation et la réadaptation. Les résultats confirment également la pertinence d’investiguer les déterminants du RAT et de l’indemnisation selon le genre.

Soil CO2 emission as related to incorporation of sugarcane crop residues and aggregate breaking after rotary tiller

O preparo do solo é um dos processos que aceleram a decomposição da matéria orgânica, transferindo carbono para atmosfera, principalmente na forma de CO2. Neste trabalho, investigou-se o efeito do preparo com enxada rotativa sobre as emissões de CO2 do solo durante 02 semanas após o preparo do solo, incluindo-se a presença de resíduos vegetais sobre a superfície. As emissões foram avaliadas por 15 dias após preparo em 3 parcelas: 1) sem preparo e sem palha superficial (SPs); 2) preparo com enxada rotativa sem a presença de palha na superfície (ERs), e 3) preparo com enxada rotativa com a presença de palha superficial (ERc). As emissões provenientes da ERc foram superiores às demais (0,777 g CO2 m-2 h-1), sendo as menores emissões registradas na parcela SPs (0,414 g CO2 m-2 h-1). As emissões totais indicaram que a diferença de C-CO2 emitida à atmosfera corresponde a 3% do total de carbono adicional presente na palha, na parcela ERc, quando comparado à parcela ERs. O aumento da emissão da parcela SPs para ERs foi acompanhado de uma modificação na distribuição do tamanho de agregados, especialmente aqueles com diâmetro médio inferior a 2 mm. O aumento da emissão da parcela ERs para ERc esteve relacionado a uma diminuição da massa de palha na superfície, com fragmentação e incorporação da mesma no interior do solo. Quando se analisa a correlação linear entre emissão de CO2 versus temperatura e umidade do solo, somente a emissão da ERc foi significativamente correlacionada (p<0,05) à umidade do solo.

Creazione e sviluppo di un sistema di controllo in tempo reale per un sistema fuel cell

The control of a proton exchange membrane fuel cell system (PEM FC) for domestic heat and power supply requires extensive control measures to handle the complicated process. Highly dynamic and non linear behavior, increase drastically the difficulties to find the optimal design and control strategies. The objective is to design, implement and commission a controller for the entire fuel cell system. The fuel cell process and the control system are engineered simultaneously; therefore there is no access to the process hardware during the control system development. Therefore the method of choice was a model based design approach, following the rapid control prototyping (RCP) methodology. The fuel cell system is simulated using a fuel cell library which allowed thermodynamic calculations. In the course of the development the process model is continuously adapted to the real system. The controller application is designed and developed in parallel and thereby tested and verified against the process model. Furthermore, after the commissioning of the real system, the process model can be also better identified and parameterized utilizing measurement data to perform optimization procedures. The process model and the controller application are implemented in Simulink using Mathworks` Real Time Workshop (RTW) and the xPC development suite for MiL (model-in-theloop) and HiL (hardware-in-the-loop) testing. It is possible to completely develop, verify and validate the controller application without depending on the real fuel cell system, which is not available for testing during the development process. The fuel cell system can be immediately taken into operation after connecting the controller to the process.

Results of a feasibility study: barriers and facilitators in implementing the Sherbrooke model in France.

International audience

Chronic low back pain, chronic disability at work, chronic management issues.

International audience