Influence of experimental factors on results of thermogravimetric analysis

Thermogravimetric results are influenced by a series of experimental factors, such as furnace heating rate and atmosphere, velocity of carrier gas, sample mass, etc. In this work a practical evaluation of these parameters are showed for calcium oxalate, with teaching objectives, considering that undergraduate text books discuss but do not show experimental details for these cases.

Evaluation of transfer impressions for osseointegrated implants at various angulations

The accuracy of impressions that transfer the relationship of the implant to the metal framework of the prosthesis continues to be a problem. This study was designed to evaluate the accuracy of the transfer process under variable conditions with regard to implant analog angulations, impression materials, and techniques. Replicas (n = 60) of a metal matrix (control) containing four implants at 90°, 80°, 75°, and 65° in relation to the horizontal surface were obtained by using three impression techniques: T1 - indirect technique with conical copings in closed trays; T2 - direct technique with square copings in open trays; and T3 - square copings splinted with autopolymerizing acrylic resin; and four elastomers: P-polysulfide; I-polyether; A-addition silicone; and Z-condensation silicone. The values of the implant analog annulations were assessed by a profilometer to the nearest 0.017°, then submitted to analysis of variance for comparisons at significance of 5% (P < .05). For implant analog at 90°, the material A associated with T2 and material Z with T3 behaved differently (P < .05) from all groups. At 80°, all materials behaved differently (P < .01) with T1. At 75°, when T1 was associated, materials P and A showed similar behavior, as well as materials I and Z; however, P and A were different from I and Z (P < .01). When T3 was associated, all experimental groups behaved differently among them (P < .01). At 65°, the materials P and Z behaved differently (P < .01) from the control group with T1, T2, and T3; the materials I and A behaved differently from the control group (P < .01) when T1 and T2, respectively, were associated. The more perpendicular the implant analog annulation is in relation to the horizontal surface, the more accurate the impression. The best materials were material I and A and the most satisfactory technique was technique 3.

Influence of parecoxib (cox-2 inhibitor) in experimental pleurodesis

Background: The intrapleural instillation of a sclerosing agent produces an inflammatory process frequently followed by pain. The treatment can include the use of analgesics or anti-inflammatory drugs. Previously, it was demonstrated (experimental studies) that corticoids and nonsteroidal anti-inflammatory drugs (diclofenac) reduce the inflammation and fibrosis produced by talc but not by transforming growth factor-P or silver nitrate. The objective of this study was to determine whether parecoxib (COX-2 inhibitor) affects pleurodesis induced by talc or silver nitrate. Methods: 140 rabbits received intrapleural. injection (2 mL) of 400 mg/kg of talc or 0.5% silver nitrate. A subgroup of 70 animals received additional daily intramuscular parecoxib (1 mg/kg). They were sacrificed at 4, 24, 48, 72 h or 7, 14, or 28 days after the procedure. The pleural fluid was quantified; biochemical examinations (glucose, lactic dehydrogenase, and proteins) and immunologic dosages (interleukin-8, vascular endothelial growth factor, and transforming growth factor-beta(1)) were analyzed in pleural fluid and blood. Finally, macro- and microscopic pleura and lung studies were performed. Results: Evaluation after 28 days demonstrated that parecoxib reduced pleural and pulmonary inflammation but not pleural adhesions. The changes were observed precociously (72 h) and were more evident after silver nitrate injection. Conclusion: Systemic parecoxib injection does not interfere with talc or silver nitrate pleurodesis. These results suggest that use of COX-2 inhibitors can be considered and depending of the results of other studies, recommended in human pleurodesis. (c) 2008 Elsevier Ltd. All rights reserved.

ETIKETAGGER: herramienta para el etiquetaje de secuencias de imágenes

La adaptación del reconocimiento de objetos sobre la robótica móvil requiere un enfoque y nuevas aplicaciones que optimicen el entrenamiento de los robots para obtener resultados satisfactorios. Es conocido que el proceso de entrenamiento es largo y tedioso, donde la intervención humana es absolutamente necesaria para supervisar el comportamiento del robot y la dirección hacia los objetivos. Es por esta razón que se ha desarrollado una herramienta que reduce notablemente el esfuerzo humano que se debe hacer para esta supervisión, automatizando el proceso necesario para obtener una evaluación de resultados, y minimizando el tiempo que se malgasta debido a errores humanos o falta de infraestructuras.

Revisión de los trabajos publicados sobre promoción de la salud en jóvenes españoles.

The objective of this study is to review the health promotion interventions on spanish youths published in Spanish in the 1995-2000 period and to describe them in accordance with the scope within which they have been carried out, the topics addressed, the methodology, the evaluation design used and the results obtained. Two hundred and fourteen intervention were identified. Illegal drugs were the topic on which the largest number of interventions were focused (29.8%), followed by alcohol (15.9%), the risk-related sexual behaviours (14.6%) and leisure time (12.6%). The activities carried out most often were: participation-based educational methods (30.7%), explanatory education methods (11.5%) and the preparation of educational materials (11%). In 80.8% of the cases, some evaluation of the health promotion activities was found. The type of evaluation employed most often was the process evaluation (73.7%), and the medium-long term results evaluation being those employed the least (2.2%). The evaluation methodologies used most often were questionnaires (28.2%). A combination of qualitative and quantitative methods was employed in 13.2% of the cases. The four interventions in which the medium-long term impact was gauged had the purpose of preventing and reducing cigarette smoking and/or drinking and or marijuana smoking, all of these initiatives achieving a reduction in cigarette smoking. In conclusion, it seems necessary to improve the design of the evaluations of the health promotion initiatives addressed to young people in Spain and to increase the dissemination of the same by way of their publication.

Dynamic estimation of three-dimensional cerebrovascular deformation from rotational angiography

Purpose: The objective of this study is to investigate the feasibility of detecting and quantifying 3D cerebrovascular wall motion from a single 3D rotational x-ray angiography (3DRA) acquisition within a clinically acceptable time and computing from the estimated motion field for the further biomechanical modeling of the cerebrovascular wall. Methods: The whole motion cycle of the cerebral vasculature is modeled using a 4D B-spline transformation, which is estimated from a 4D to 2D + t image registration framework. The registration is performed by optimizing a single similarity metric between the entire 2D + t measured projection sequence and the corresponding forward projections of the deformed volume at their exact time instants. The joint use of two acceleration strategies, together with their implementation on graphics processing units, is also proposed so as to reach computation times close to clinical requirements. For further characterizing vessel wall properties, an approximation of the wall thickness changes is obtained through a strain calculation. Results: Evaluation on in silico and in vitro pulsating phantom aneurysms demonstrated an accurate estimation of wall motion curves. In general, the error was below 10% of the maximum pulsation, even in the situation when substantial inhomogeneous intensity pattern was present. Experiments on in vivo data provided realistic aneurysm and vessel wall motion estimates, whereas in regions where motion was neither visible nor anatomically possible, no motion was detected. The use of the acceleration strategies enabled completing the estimation process for one entire cycle in 5-10 min without degrading the overall performance. The strain map extracted from our motion estimation provided a realistic deformation measure of the vessel wall. Conclusions: The authors' technique has demonstrated that it can provide accurate and robust 4D estimates of cerebrovascular wall motion within a clinically acceptable time, although it has to be applied to a larger patient population prior to possible wide application to routine endovascular procedures. In particular, for the first time, this feasibility study has shown that in vivo cerebrovascular motion can be obtained intraprocedurally from a 3DRA acquisition. Results have also shown the potential of performing strain analysis using this imaging modality, thus making possible for the future modeling of biomechanical properties of the vascular wall.

Proliferative and Osteogenic Differentiation Potentials of Human Fetal Bone Cells

BACKGROUND. Human primary fetal bone cells (hFBC) are being characterized for use in bone tissue regeneration. Unlike human mesenchymal stem cells (hMSC), hFBC are partially differentiated with high expansion and regeneration potential. To date, proliferative and osteoblastic differentiation capacities of fetal bone cells remain poorly examined. The goal of this study was to define an environmental culture conditions for optimal proliferation and production of extracellular bone matrix leading to efficient bone repair. METHODS. Human primary FBC derived from our dedicated, consistent banks of bone cells comprising several fetal donors. For proliferation study, monolayer cultures of both cell types were expanded in DMEM or α- MEM media. Osteoblastic differentiation potentials of both hFBC and hMSC were evaluated through RT-PCR. Regulation of osteogenic differentiation by protein ligands Wnt3a and Wnt5a was studied by ALP enzymatic activity measurement. RESULTS. Evaluation of the proliferation rate demonstrated that hFBC proliferated more rapidly in α-MEM medium. Regarding growth factors that could stimulate cell proliferation rate, we observed that PDGF, FGF2 and Wnt3a had positive effects on proliferation of hFBC. Gene expression analysis demonstrated a higher expression of runx2 in hFBC cultured in basal conditions, which was was similar than that was observed in hMSC in osteoinductive culture conditions. Expression of sox9 was very low in hBFC and hMSC, compared to expression observed in fetal cartilage cells. Looking at osteogenic differentiation capacity, ALP activity was positively regulated byWnt5awhen hFBCwere cultured inα-MEM, but not in DMEM. Conversely, Wnt3a was shown to block the effect of osteogenic inductors on differentiation of both cell types. CONCLUSION. Data presented in this study indicate that the proliferation and differentiation of fetal and mesenchymal stem cells is optimal in α- MEM. Evidence for a pre-differentiated state of hBFC was given by extracellular matrix spontaneous mineralization as well as by higher ALP activity levels observed for these cells in baseline culture conditions, in comparison with hMSC. As we showed that, in vitro, hFBC express a higher capacity to differentiate in osteoblasts, they represent an attractive and promising prospect for fundamental research, and specifically for a new generation of skeletal tissue engineering.

Influência de alguns parâmetros experimentais nos resultados de análises calorimétricas diferenciais - DSC

A series of experiments were performed in order to demonstrate to undergraduate students or users of the differential scanning calorimetry (DSC), that several factors can influence the qualitative and quantitative aspects of DSC results. Saccharin, an artificial sweetner, was used as a probe and its thermal behavior is also discussed on the basis of thermogravimetric (TG) and DSC curves.

Spectrometrical Monitoring of Laser Sintering Process of Ceramic Material

This thesis is done as a part of project called FuncMama that is a project between Technical Research Centre of Finland (VTT), Oulu University (OY), Lappeenranta University of Technology (LUT) and Finnish industrial partners. Main goal of the project is to manufacture electric and mechanical components from mixed materials using laser sintering. Aim of this study was to create laser sintered pieces from ceramic material and monitor the sintering event by using spectrometer. Spectrometer is a device which is capable to record intensity of different wavelengths in relation with time. In this study the monitoring of laser sintering was captured with the equipment which consists of Ocean Optics spectrometer, optical fiber and optical lens (detector head). Light from the sintering process hit first to the lens system which guides the light in to the optical fibre. Optical fibre transmits the light from the sintering process to the spectrometer where wavelengths intensity level information is detected. The optical lens of the spectrometer was rigidly set and did not move along with the laser beam. Data which was collected with spectrometer from the laser sintering process was converted with Excel spreadsheet program for result’s evaluation. Laser equipment used was IPG Photonics pulse fibre laser. Laser parameters were kept mainly constant during experimental part and only sintering speed was changed. That way it was possible to find differences in the monitoring results without fear of too many parameters mixing together and affecting to the conclusions. Parts which were sintered had one layer and size of 5 x 5 mm. Material was CT2000 – tape manufactured by Heraeus which was later on post processed to powder. Monitoring of different sintering speeds was tested by using CT2000 reference powder. Moreover tests how different materials effect to the process monitoring were done by adding foreign powder Du Pont 951 which had suffered in re-grinding and which was more reactive than CT2000. By adding foreign material it simulates situation where two materials are accidently mixed together and it was studied if that can be seen with the spectrometer. It was concluded in this study that with the spectrometer it is possible to detect changes between different laser sintering speeds. When the sintering speed is lowered the intensity level of light is higher from the process. This is a result of higher temperature at the sintering spot and that can be noticed with the spectrometer. That indicates it could be possible to use spectrometer as a tool for process observation and support the idea of having system that can help setting up the process parameter window. Also important conclusion was how well the adding of foreign material could be seen with the spectrometer. When second material was added a significant intensity level raise could be noticed in that part where foreign material was mixed. That indicates it is possible to see if there are any variations in the material or if there are more materials mixed together. Spectrometric monitoring of laser sintering could be useful tool for process window observation and temperature controlling of the sintering process. For example if the process window for specific material is experimentally determined to get wanted properties and satisfying sintering speed. It is possible if the data is constantly recorded that the results can show faults in the part texture between layers. Changes between the monitoring data and the experimentally determined values can then indicate changes in the material being generated by material faults or by wrong process parameters. The results of this study show that spectrometer could be one possible tool for monitoring. But to get in that point where this all can be made possible much more researching is needed.

Impact of Sacrospinous Colpopexy Associated with Anterior Colporrhaphy for the Treatment of Dome Prolapse on all Three Vaginal Compartments

Objective To evaluate the results of sacrospinous colpopexy surgery associated with anterior colporrhaphy for the treatment of women with post-hysterectomy vaginal vault prolapse. Methods This prospective study included 20women with vault prolapse, PelvicOrgan Prolapse Quantification System (POP-Q) stage≥2, treated between January 2003 and February 2006, and evaluated in a follow-up review (more than one year later). Genital prolapse was evaluated qualitatively in stages and quantitatively in centimeters. Prolapse stage < 2 was considered to be the cure criterion. Statistical analysis was performed using the Wilcoxon test (paired samples) to compare the points and stages of prolapse before and after surgery. Results Evaluation of the vaginal vault after one year revealed that 95% of subjects were in stage zero and that 5% were in stage 1. For cystocele, 50% were in stage 1, 10% were in stage 0 (cured) and 40% were in stage 2. For rectocele, three women were in stage 1 (15%), one was in stage 2 (5%) and 16 had no further prolapse. The most frequent complication was pain in the right buttock, with remission of symptoms in all three cases three months after surgery. Conclusions In this retrospective study, the surgical correction of vault prolapse using a sacrospinous ligament fixation technique associatedwith anterior colporrhaphy proved effective in resolving genital prolapse. Despite the low complication rates, there was a high rate of cystocele, which may be caused by posterior vaginal shifting due to either the technique or an overvaluation by the POP-Q system.

Mise à l’essai et évaluation qualitative d’une intervention inspirée de la pédagogie narrative destinée aux infirmières soignant des personnes âgées en état confusionnel aigu

Les personnes âgées occupent une proportion importante des lits dans les centres hospitaliers de soins de courte durée québécois et leur présence est en augmentation. Parmi ces personnes, plusieurs présentent un état confusionnel aigu (ÉCA), voire un délirium, au cours de leur hospitalisation. Les soins infirmiers qu’elles requièrent sont complexes et les études portant sur la formation continue des infirmières tiennent peu compte de cette réalité. Les approches utilisées dans les études sont surtout centrées sur l’acquisition de connaissances et d’habiletés techniques et négligent les aspects créatifs, relationnels, critiques, réflexifs et éthiques essentiels à une prestation de soins infirmiers de qualité. On y retrouve également peu d’informations sur la conception de l’intervention éducative et sur son évaluation. C’est dans cette perspective que le but de l’étude était de mettre à l’essai et d’évaluer qualitativement le processus et les résultats d’une intervention éducative auprès d’infirmières soignant des personnes âgées hospitalisées en ÉCA. Plus particulièrement, ce sont les conditions facilitant et contraignant l’intervention, les aspects les plus utiles pour la pratique, les différents savoirs exprimés et les résultats de soins perçus par les participantes qui étaient recherchés. C’est en s’inspirant de la pédagogie narrative de Diekelmann (2001) et des savoirs infirmiers de Chinn et Kramer (2008) que l’intervention a été conçue et évaluée. La description d’expériences de soins vécues par les infirmières et la création d’un environnement d’apprentissage favorisant l’interprétation, en groupe, de ces expériences à l’aide d’informations théoriques et empiriques caractérisent la pédagogie narrative à la base de cette intervention. Pour atteindre le but, une étude de cas a été retenue. La stratégie d’échantillonnage par choix raisonné a permis de sélectionner des participantes travaillant sur les trois quarts de travail, ayant différents niveaux de formation et une expérience comme infirmière variant de huit mois à 36 ans, dont l’âge variait de 23 à 64 ans. L’échantillon, composé de 15 infirmières soignant fréquemment des personnes en ÉCA et travaillant sur des unités de soins chirurgicaux cardiologiques et orthopédiques, était réparti dans trois groupes égaux de cinq participantes. L’intervention éducative comprenait quatre journées de formation offertes à intervalle de trois semaines pour une durée totale de 12 semaines. Au cours de chacune de ces journées, les participantes devaient effectuer un travail écrit réflexif concernant une situation de soins vécue avec une personne en ÉCA et, par la suite, partager, interpréter et s'interroger sur ces situations en faisant des liens avec des informations théoriques et empiriques sur l’ÉCA dans le cadre d’un atelier de groupe. Une triangulation de méthodes de collecte de données, incluant des notes de terrain de l’investigatrice, les travaux réflexifs des participantes, des questionnaires complétés par les participantes après chaque journée de formation et une entrevue individuelle avec chaque participante réalisée par une intervieweuse externe à la fin de l’intervention, a permis de décrire la mise à l’essai de l’intervention et d’évaluer qualitativement son processus et ses résultats. Une analyse de contenu des données qualitatives intra et inter participante a été effectuée. La mise à l’essai de l’intervention a mis en évidence l’importance de tenir compte des besoins variés des participantes et d’ajuster l’intervention éducative d’un groupe à l’autre, notamment eu égard aux contenus théoriques et empiriques sur l’ECA. L’évaluation du processus souligne que l’intervention a été facilitée par les attitudes et la diversité des expériences des participantes, ainsi que par l’utilisation de situations de soins réelles permettant d’intégrer la théorie dans la pratique. L’accès à de nouveaux outils d’évaluation des personnes en ÉCA a été perçu particulièrement utile par les participantes. Quant à l’évaluation des résultats, elle a permis de rendre visibles de nombreux savoirs empiriques, éthiques et esthétiques et certains savoirs personnels et émancipatoires exprimés par les participantes. Les participantes ont, entre autres, réalisé des évaluations plus approfondies des personnes en ÉCA, ont réduit ou évité les mesures de contrôle physiques des personnes atteintes et ont impliqué davantage les familles dans les soins. L’évaluation a aussi permis de décrire certains résultats perçus par les participantes sur le bien-être physique et psychologique des personnes soignées et sur les familles. Les personnes en ECA étaient, entre autres, rassurées, plus calmes et soulagées et les familles moins inquiètes et davantage impliquées dans les soins. Les résultats de l’étude mettent en évidence l’applicabilité d’une intervention éducative narrative basée sur un cadre de référence en sciences infirmières et son utilité pour la formation continue dans les milieux de soins. L’étude ouvre la porte à des possibilités de transfert de l’intervention à d’autres populations d’infirmières soignant des clientèles ayant des besoins complexes, notamment en gériatrie, en oncologie ou en soins palliatifs. Des études visant à évaluer l’intervention auprès d’un échantillon plus important et à explorer ses effets sur les personnes soignées et leurs familles sont proposées.

A utilização de instrumentos derivativos financeiros por empresas brasileiras

Esta pesquisa qualitativa tem por objetivo avaliar como as empresas não-financeiras brasileiras utilizam os chamados instrumentos derivativos ou contratos derivativos. Entende-se por empresas não-financeiras aquelas que não apresentam como negócio principal a atividade de intermediação financeira. Esta pesquisa é baseada em um estudo que vem sendo desenvolvida periodicamente pela Wharton School e incorpora diversas adaptações visando maior adequação às características específicas do mercado financeiro brasileiro. Através de uma pesquisa qualitativa, foram enviados questionários para os responsáveis pelo departamento financeiro de empresas não-financeiras que atuam no Brasil com o objetivo de identificar motivos que os levam a negociar ou não os contratos derivativos na gestão financeira das empresas. Além disso, buscou-se também investigar os resultados esperados pelas empresas com o uso destes instrumentos, os procedimentos de controle e acompanhamento das operações com derivativos e as formas de avaliação de preço e de resultados.

Ação social das empresas privadas: uma metodologia para avaliação de resultados

In the recent years Corporate Social Action (CSA) has become more and more relevant to corporate context. The aim is to benefit both poor communities and the donnor companies, as it meets the needs of their salient stakeholders. Nevertheless, there still exists considerable scepticism concerning CSA. In order to become a solid management practice, it is critcal to evidence the attained results. Up to now, the focus has been on process evaluation, that is, on the policies companies are adopting. Literature revision has shown a great need of studies related to results identification in this field. Therefore, using stakeholders` framework (according to Wood, 1991; Donaldson and Preston, 1995; Hopkins, 1997; Hamil, 1999), we have developped a methodology to evaluate CSA results, based on public and private effectiveness criteria. As we applied it to assess Xerox social action in Brazil we were able to identify the attainment degree of expected results related to the benefitted community (Mangueira) and also to some Xerox salient stakeholders (employees and clients).

Proposta de sistemática para a avaliação e controle de custos em propriedades rurais : o caso de uma empresa de criação de gado

Esta dissertação discute a gestão de Custos em propriedades rurais, tendo como objetivo principal a proposição de uma sistemática para avaliação e controle de custos em propriedades rurais, bem como mensurar os custos unitários dos produtos resultantes dos processos de produção referentes à pecuária. Para formulação desta sistemática, revisou-se a literatura sobre as mudanças ocorridas no decorrer dos últimos anos no setor primário da economia brasileira bem como, os sistemas de gestão em propriedades rurais. Uma revisão literária sobre os princípios de custeio (total, parcial e variável) e métodos de custeio (custo padrão, centro de custos e custeio baseado em atividades) também foi efetuada. A sistemática proposta foi estruturada em seis etapas: (1) análise dos contextos interno e externo da propriedade rural; (2) identificação da base conceitual; (3) estruturação do sistema de custos; (4) escolha do sistema de custos a utilizar; (5) aplicação prática do sistema de custos e análise da Evolução dos custos; (6) avaliação do resultado e identificação das oportunidades de melhoria. Com a aplicação prática do modelo em uma propriedade rural da região oeste do estado do Rio Grande do Sul foi possível concluir que a sistemática alcançou os objetivos já citados, e que a aplicação do método ABC seria um complemento refinado ao sistema de custos da empresa.