Sustentabilidade dos Georrecursos: Proposta de Definição de Índice de Sustentabilidade para Pedreiras Produtoras de Agregados

As atuais políticas industriais procuram conjugar os objetivos económicos com direitos sociais e ambientais através da aplicação de políticas de desenvolvimento sustentável. A gestão coordenada destes três capítulos visa contribuir para o bem‐estar e progressiva melhoria da qualidade de vida dos cidadãos. Esta Tese de Mestrado tem por objetivo a aplicação de um sistema de avaliação de pedreiras produtoras de agregados partindo da análise integrada de indicadores setoriais nas áreas económica, social e ambiental. Deste modo é proposto o desenvolvimento de um método de avaliação que permita proceder a uma análise qualitativa e quantitativa do desempenho de pedreiras do ponto de vista da sua sustentabilidade. Numa abordagem inicial, enquadradora das questões que se levantam com as políticas de desenvolvimento sustentável, é feita uma introdução relativa às correntes de pensamento dominantes sobre esta questão, tendo ainda sido feito um relacionamento entre as questões ligadas com o planeamento estratégico deste setor industrial e as questões ligadas com o ordenamento do território. Posteriormente, é feita uma análise do enquadramento do setor extrativo relativo à exploração de pedreiras no âmbito das políticas económicas, sociais e ambientais da Comunidade Europeia e uma caracterização da importância deste setor industrial na economia portuguesa. Após o desenvolvimento destas questões, é dada sequência ao trabalho desenvolvido na adoção e criação de indicadores económicos, sociais e ambientais adaptados à situação particular das pedreiras produtoras de inertes portuguesas. Finalmente, é proposto o desenvolvimento de um método de cálculo tendo em vista a criação de um Índice de Sustentabilidade a partir da análise dos resultados dos indicadores setoriais anteriormente referidos. Assim, é apresentada uma súmula de conclusões sobre este tipo de abordagem, suas vantagens e inconvenientes relativamente aos métodos tradicionais de avaliação deste tipo de indústria. É, por último, apresentado um conjunto de sugestões que permitam a utilização na rotina, de forma acessível, desta nova ferramenta de análise.

Medidas de intervención para promoción de conductas saludables y prevención de riesgos laborales relacionados con accidentalidad y enfermedad laboral en trabajadores de minas de Carbón

Colombia en su legislación normatiza el sector de la minería de carbón, sin embargo se considera que las estrategias no han sido suficientes para la identificación, prevención y control de la accidentalidad y enfermedad laboral. Durante el año 2013 el índice de fatalidad fue de 1,59. Estadísticas del año 2004 evidencian que las neumoconiosis fueron las mayores causas de invalidez de origen profesional. Objetivo: Categorizar actividades de intervención en promoción y prevención de accidentalidad y enfermedad laboral en trabajadores de la minería de carbón. Metodología: Se realizó una revisión de literatura sobre minería de carbón y salud la cual fue obtenida de las bases de datos PUBMED, Sciendirect, VHL, SINAB por literatura publicada sin límites de año, en idioma inglés, español o portugués. Para la búsqueda se utilizaron términos en lenguaje controlado (términos MESH), revisión por pares de títulos y resúmenes. Las publicaciones fueron seleccionadas para revisión de texto completo bajo criterios de inclusión y exclusión. Los códigos contemplados para esta revisión fueron: a) país donde la intervención se llevó a cabo, b) salud ocupacional, c) prevención de accidentalidad, d) programas de promoción, e) tecnologías, f) resultados obtenidos. Resultados: Del total de 2500 artículos seleccionados por los autores principales se realizó la revisión de los primeros 300 artículos, 32 hacen referencia al tema de salud ocupacional y minería de carbón, 10 contienen intervenciones consideradas de relevancia para esta revisión bibliográfica. Se presentan intervenciones estadísticamente significativas (p<0.05) y que han demostrado ser de impacto positivo en la minería de carbón en promoción y prevención de accidentalidad y enfermedad ocupacional. Conclusiones: Se identificaron las siguientes cuatro tipos de intervención: 1) las de carácter educativo que hacen referencia a las capacitaciones participativas, el entrenamiento por medio de “degraded image”, la realización de gestión de autocontrol y retroalimentación para el uso de elementos de protección personal (EPP), la aplicación del Modelo de Proceso Paralelo Extendido; 2) intervenciones preventivas como la medición de alcoholimetría antes del turno, la presencia de personal de enfermería en minas de carbón y el reconocimiento de los predictores de la enfermedad para optimizar la prevención primaria; 3)intervenciones de vigilancia como la promovida en la metodología Estadísticas Europeas de Accidentes de Trabajo (EEAT) para la investigación de los accidentes de trabajo, la aplicación de las recomendaciones de la Organización Mundial de la Salud (OMS) para la detección de la neumoconiosis y 4) De carácter tecnológico consistente en la intervención de tareas a partir de los resultados de la aplicación del software desarrollado por el Instituto Nacional para la Seguridad y Salud Ocupacional (NIOSH). Estas intervenciones han demostrado ser eficaces en la promoción y prevención de accidentalidad y enfermedad ocupacional por lo cual se recomienda su aplicación en Colombia posterior al análisis de costo-efectividad.

Avaliação de Riscos : Estimação Qualitativa da Probabilidade e da Gravidade em Contexto de Risco Elevado

O processo de gestão de risco consiste, no estudo estruturado de todos os aspetos inerentes ao trabalho e é composto pela análise de risco, avaliação de risco e controlo de risco. Na análise de risco, é efetuada a identificação de todos os perigos presentes e a estimação da probabilidade e da gravidade, de acordo com o método de avaliação de risco escolhido. Este estudo centra-se na primeira etapa do processo de avaliação de risco, mais especificamente na análise de risco e nos marcadores de informação necessários para se efetuar a estimação de risco na industria extrativa a céu aberto (atividade de risco elevado). Considerando que o nível de risco obtido, depende fundamentalmente da estimação da probabilidade e da gravidade, ajustada a cada situação de risco, procurou-se identificar os marcadores e compreender a sua influência nos resultados da avaliação de risco (magnitude). O plano de trabalhos de investigação foi sustentado por uma metodologia qualitativa de recolha, registo e análise dos dados. Neste estudo, a recolha de informação foi feita com recurso às seguintes técnicas de investigação: - Observação estruturada e planeada do desmonte da rocha com recurso a explosivos; - Entrevista individual de formadores e gestores de risco (amostragem de casos típicos); Na análise e discussão qualitativa dos dados das entrevistas recorreu-se às seguintes técnicas: - Triangulação de analistas e tratamento de dados cognitiva (técnicas complementares); - Aposição dos marcadores de informação, versus, três métodos de avaliação de risco validados. Os resultados obtidos apontam no sentido das hipóteses de investigação formuladas, ou seja, o tipo de risco influi da seleção da informação e, existem diferenças significativas no nível de risco obtido, quando na estimação da probabilidade e da gravidade são utilizados marcadores de informação distintos.

Exposição ocupacional à sílica no Brasil no ano de 2001

OBJETIVO: Estimar o número de trabalhadores brasileiros expostos à sílica no ano de 2001. MÉTODO: Informações sobre ocupações e setores econômicos foram reunidas em uma matriz de exposição ocupacional (MEO) com 347 categorias ocupacionais por 25 subsetores econômicos. Informações sobre o número de trabalhadores por ocupação foram extraídas da base de dados Relatório Anual de Informações Sociais (RAIS) do Ministério do Trabalho e Emprego. A exposição à sílica foi avaliada e classificada por dois peritos em quatro categorias, de acordo com a freqüência semanal de exposição no ambiente de trabalho. RESULTADOS: Foram considerados não expostos 31.451.594 trabalhadores (85,7%), possivelmente expostos 976.939 (2,65%), provavelmente expostos 2.404.955 (6,52%) e definitivamente expostos à sílica 2.065.929 (5,6%). Os setores com a maior prevalência de exposição foram: construção civil 65%, extração de pedras 59%, indústria de mineral não metálico 55% e indústria metalúrgica 24%. No setor de serviços de terceiros, a prevalência foi de 2%. CONCLUSÃO: A prevalência de trabalhadores brasileiros definitivamente expostos à sílica é mais alta do que aquela observada em países europeus, onde estudos semelhantes foram conduzidos.

Combined photocatalytic and fungal processes for the treatment of nitrocellulose industry wastewater

The objective of this work was to characterize the delignification effluent originating from the delignification industry and evaluate the combination of the fungus and photocatalytic process (TiO(2)/UV system) for the treatment of this effluent. The delignification effluent has proven harmful to the environment because it presents high color (3516 CU), total phenol (876 mg/L and TOC (1599 mg/L) and is also highly toxic even in a low concentration. The results of photocatalysis were 11%, 25% and 13% higher for reductions in color, total phenol and TOC, respectively. The combined treatments presented benefits when compared to the non-combined treatments. Fungus and photocatalysis in combination proved to be the best treatment, reducing the color, total phenol, toxicity (inhibition of Escherichia coli growth) and TOC by 94.2%, 92.6%, 4.9% and 62%, respectively. (C) 2008 Elsevier B.V. All rights reserved.

AnSBBR Applied to a Personal Care Industry Wastewater Treatment: Effects of Fill Time, Volume Treated Per Cycle, and Organic Load

A study was performed regarding the effect of the relation between fill time, volume treated per cycle, and influent concentration at different applied organic loadings on the stability and efficiency of an anaerobic sequencing batch reactor containing immobilized biomass on polyurethane foam with recirculation of the liquid phase (AnSBBR) applied to the treatment of wastewater from a personal care industry. Total cycle length of the reactor was 8 h (480 min). Fill times were 10 min in the batch operation, 4 h in the fed-batch operation, and a 10-min batch followed by a 4-h fed batch in the mixed operation. Settling time was not necessary since the biomass was immobilized and decant time was 10 min. Volume of liquid medium in the reactor was 2.5 L, whereas volume treated per cycle ranged from 0.88 to 2.5 L in accordance with fill time. Influent concentration varied from 300 to 1,425 mg COD/L, resulting in an applied volumetric organic load of 0.9 and 1.5 g COD/L.d. Recirculation flow rate was 20 L/h, and the reactor was maintained at 30 A degrees C. Values of organic matter removal efficiency of filtered effluent samples were below 71% in the batch operations and above 74% in the operations of fed batch followed by batch. Feeding wastewater during part of the operational cycle was beneficial to the system, as it resulted in indirect control over the conversion of substrate into intermediates that would negatively interfere with the biochemical reactions regarding the degradation of organic matter. As a result, the average substrate consumption increased, leading to higher organic removal efficiencies in the fed-batch operations.

Anaerobic sequencing batch biofilm reactor applied to automobile industry wastewater treatment: Volumetric loading rate and feed strategy effects

This paper presents a technological viability study of wastewater treatment in an automobile industry by an anaerobic sequencing batch biofilm reactor containing immobilized biomass (AnSBBR) with a draft tube. The reactor was operated in 8-h cycles, with agitation of 400 rpm, at 30 degrees C and treating 2.0 L wastewater per cycle. Initially the efficiency and stability of the reactor were studied when supplied with nutrients and alkalinity. Removal efficiency of 88% was obtained at volumetric loading rate (VLR) of 3.09 mg COD/L day. When VLR was increased to 6.19 mg COD/L day the system presented stable operation with reduction in efficiency of 71%. In a second stage the AnSBBR was operated treating wastewater in natura, i.e., without nutrients supplementation, only with alkalinity, thereby changing feed strategy. The first strategy consisted in feeding 2.0 L batch wise (10 min), the second in feeding 1.0 L of influent batch wise (10 min) and an additional 1.0 L fed-batch wise (4 h), both dewatering 2.0 L of the effluent in 10 min. The third one maintained 1.0 L of treated effluent in the reactor, without discharging, and 1.0 L of influent was fed fed-batch wise (4 h) with dewatering 1.0 L of the effluent in 10 min. For all implemented strategies (VLR of 1.40, 2.57 and 2.61 mg COD/L day) the system presented stability and removal efficiency of approximately 80%. These results show that the AnSBBR presents operational flexibility, as the influent can be fed according to industry availability. In industrial processes this is a considerable advantage, as the influent may be prone to variations. Moreover, for all the investigated conditions the kinetic parameters were obtained from fitting a first-order model to the profiles of organic matter, total volatile acids and methane concentrations. Analysis of the kinetic parameters showed that the best strategy is feeding 1.0 L of influent batchwise (10 min) and 1.0 L fed-batch wise (4 h) in 8-h cycle. (c) 2007 Elsevier B.V. All rights reserved.

Coloured Petri nets and graphical simulation for the validation of a robotic cell in aircraft industry

This paper proposes a mixed validation approach based on coloured Petri nets and 3D graphic simulation for the design of supervisory systems in manufacturing cells with multiple robots. The coloured Petri net is used to model the cell behaviour at a high level of abstraction. It models the activities of each cell component and its coordination by a supervisory system. The graphical simulation is used to analyse and validate the cell behaviour in a 3D environment, allowing the detection of collisions and the calculation of process times. The motivation for this work comes from the aeronautic industry. The automation of a fuselage assembly process requires the integration of robots with other cell components such as metrological or vision systems. In this cell, the robot trajectories are defined by the supervisory system and results from the coordination of the cell components. The paper presents the application of the approach for an aircraft assembly cell under integration in Brazil. This case study shows the feasibility of the approach and supports the discussion of its main advantages and limits. (C) 2011 Elsevier Ltd. All rights reserved.

Toxicity-directed approach of polyester manufacturing industry wastewater provides useful information for conducting treatability studies

A broader characterization of industrial wastewaters, especially in respect to hazardous compounds and their potential toxicity, is often necessary in order to determine the best practical treatment (or pretreatment) technology available to reduce the discharge of harmful pollutants to the environment or publicly owned treatment works. Using a toxicity-directed approach, this paper sets the base for a rational treatability study of polyester resin manufacturing. Relevant physical and chemical characteristics were determined. Respirometry was used for toxicity reduction evaluation after physical and chemical effluent fractionation. Of all the procedures investigated, only air stripping was significantly effective in reducing wastewater toxicity. Air stripping in pH 7 reduced toxicity in 18.2%, while in pH 11 a toxicity reduction of 62.5% was observed. Results indicated that toxicants responsible for the most significant fraction of the effluent`s instantaneous toxic effect to unadapted activated sludge were organic compounds poorly or not volatilized in acid conditions. These results led to useful directions for conducting treatability studies which will be grounded on actual effluent properties rather than empirical or based on the rare specific data on this kind of industrial wastewater. (C) 2008 Elsevier B.V. All rights reserved.

New reconciliation model for gold industry

Reconciliation can be divided into stages, each stage representing the performance of a mining operation, such as: long-term estimation, short-term estimation, planning, mining and mineral processing. The gold industry includes another stage which is the budget, when the company informs the financial market of its annual production forecast. The division of reconciliation into stages increases the reliability of the annual budget informed by the mining companies, while also detecting and correcting the critical steps responsible for the overall estimation error by the optimization of sampling protocols and equipment. This paper develops and validates a new reconciliation model for the gold industry, which is based on correct sampling practices and the subdivision of reconciliation into stages, aiming for better grade estimates and more efficient control of the mining industry`s processes, from resource estimation to final production.

OPTIMIZATION OF THE TREATMENT PROCESS FOR RESIDUAL WATER FROM A BEER INDUSTRY

The optimization of the treatment process for residual waters from a brewery operating under the modality of an anaerobic reactor and activated sludge combination was studied in two phases. In the first stage, lasting for six months, the characteristics and parameters of the plant operation were analyzed, wherein a diversion rate of more than 50% to aerobic treatment, the use of two aeration tanks and a high sludge production prevailed. The second stage comprised four months during which the system worked under the proposed operational model, with the aim of improving the treatment: reduction of the diversion rate to 30% and use of only one aeration tank At each stage, TSS, VSS and COD were measured at the entrance and exit of the anaerobic reactor mid the aeration tanks. The results were compared with the corresponding design specifications and the needed conditions were applied to reduce the diversion rate towards the aerobic process through monitoring the volume and concentration of the affluent, while applying the strategic changes in reactor parameters needed to increase its efficiency. A diversion reduction from 53 to 34% was achieved, reducing the sludge discharge generated in the aerobic system from 3670mg TSS/l. with two aeration tanks down to 2947mf TSS/l using one tank keeping the same relation VSS:TSS (0.55) and an efficiency of total removal of 98% in terms of COD.

Wine industry residues extracts as natural antioxidants in raw and cooked chicken meat during frozen storage

The effect of Isabel (IGE) and Niagara (NGE) grape seed and peel extracts on lipid oxidation, instrumental colour, pH and sensory properties of raw and cooked processed chicken meat stored at -18 degrees C for nine months was evaluated. The pH of raw and cooked samples was not affected by the addition of grape extracts. IGE and NGE were effective in inhibiting the lipid oxidation of raw and cooked chicken meat, with results comparable to synthetic antioxidants. The extracts caused alterations in colour, as evidenced by the instrumental (darkening and lower intensity of red and yellow colour) and sensory results of cooked samples. In the sensory evaluation of odour and flavour, IGE produced satisfactory results, which did not differ from synthetic antioxidants. These findings suggest that the ICE and NGE are effective in retarding lipid oxidation of raw and cooked chicken meat during frozen storage. (c) 2011 Elsevier Ltd. All rights reserved.

Adoption and use of precision agriculture technologies in the sugarcane industry of So Paulo state, Brazil

Precision agriculture (PA) technologies are being applied to crops in Brazil, which are important to ensure Brazil`s position in agricultural production. However, there are no studies available at present to indicate the extent to which PA technologies are being used in the country. Therefore, the main objective of this research was to investigate how the sugar-ethanol industry in So Paulo state, which produces 60% of the domestic sugarcane, is adopting and using these techniques. For this purpose, primary data were used, which were obtained from a questionnaire sent to all companies operating in the sugar-ethanol industry in the region. The aim was to determine to what extent these companies are adopting and using PA technologies, and also to promote a more in-depth discussion of the topic within the sugar-ethanol industry. Information was obtained on the features of the companies, on sources of information that they use for adopting these technologies, on their impacts on these companies and on obstacles hindering their adoption. The main conclusions of this research suggest that companies that adopt and use PA practices reap benefits, such as managerial improvements, higher yields, lower costs, minimization of environmental impacts and improvements in sugarcane quality.

Greenhouse gases emission from soil contaminated with automobile industry residue in Brazil

Solid waste of the automobile industry containing large amounts of heavy metals might affect the emission of greenhouse gases (GHG) when applied to the soil. Accumulation of inorganic chemical elements in the environment generally occurs due to human activity (industry, agriculture, mining and waste landfills). Residues from human activities may release heavy metals to the soil solution, causing toxicity to plants and other soil organisms. Heavy metals may also be adsorbed to clay minerals and/or complexed by the soil organic matter, becoming a potential source of pollutants. Not much is known about the behavior of solid wastes in tropical soil as regarded as source of greenhouse gases (GHG). The emission of GHG (CO(2), CH(4) and N(2)O) was evaluated in incubated soil samples collected in an area contaminated with a solid residue from an automobile industry. Samples were randomly collected at 0 to 0.2 m (a mix of soil and residue), 0.2 to 0.4 m (only residue) and 0.4 to 0.6 m (only soil). A contiguous uncontaminated area, cultivated with sugarcane, was also sampled following the same protocol. Canonical Discriminant Analysis and Principal Component Analysis were applied to the data to evaluate the GHG emission rates. Emission rates of GHG were greater in the samples from the contaminated than the sugarcane area, particularly high during the first days of incubation. CO(2) emissions were greater in samples collected at the upper layer for both areas, while CH(4) and N(2)O emissions were similar in all samples. The emission rates of CH(4) were the most efficient variables to differentiate contaminated and uncontaminated areas.

Nuclear Quadrupole Resonance: A Technique to Control Hydration Processes in the Pharmaceutical Industry

Pharmaceuticals can exist in many solid forms, which can have different physical and chemical properties. These solid forms include polymorphs, solvates, amorphous, and hydrates. Particularly, hydration process can be quite common since pharmaceutical solids can be in contact with water during manufacturing process and can also be exposed to water during storage. In the present work, it is proved that NQR technique is capable of detecting different hydrated forms not only in the pure raw material but also in the final product (tablets), being in this way a useful technique for quality control. This technique was also used to study the dehydration process from pentahydrate to trihydrate.