Trace Elements in Ambient Air at Porto Metropolitan Area—Checking for Compliance with New European Union (Eu) Air Quality Standards

Because of the scientific evidence showing that arsenic (As), cadmium (Cd), and nickel (Ni) are human genotoxic carcinogens, the European Union (EU) recently set target values for metal concentration in ambient air (As: 6 ng/m3, Cd: 5 ng/m3, Ni: 20 ng/m3). The aim of our study was to determine the concentration levels of these trace elements in Porto Metropolitan Area (PMA) in order to assess whether compliance was occurring with these new EU air quality standards. Fine (PM2.5) and inhalable (PM10) air particles were collected from October 2011 to July 2012 at two different (urban and suburban) locations in PMA. Samples were analyzed for trace elements content by inductively coupled plasma–mass spectrometry (ICP-MS). The study focused on determination of differences in trace elements concentration between the two sites, and between PM2.5 and PM10, in order to gather information regarding emission sources. Except for chromium (Cr), the concentration of all trace elements was higher at the urban site. However, results for As, Cd, Ni, and lead (Pb) were well below the EU limit/target values (As: 1.49 ± 0.71 ng/m3; Cd: 1.67 ± 0.92 ng/m3; Ni: 3.43 ± 3.23 ng/m3; Pb: 17.1 ± 10.1 ng/m3) in the worst-case scenario. Arsenic, Cd, Ni, Pb, antimony (Sb), selenium (Se), vanadium (V), and zinc (Zn) were predominantly associated to PM2.5, indicating that anthropogenic sources such as industry and road traffic are the main source of these elements. High enrichment factors (EF > 100) were obtained for As, Cd, Pb, Sb, Se, and Zn, further confirming their anthropogenic origin.

Quality Standards for Approved Social Work March 2005 (PDF 1.10MB)

Standards and criteria drawn from the recommendations of A Study of Approved Social Work.

Quality Standards for Services Promoting Mental and Emotional Wellbeing and Suicide Prevention

These standards will apply to all organisations providing mental & emotional wellbeing and suicide prevention services which are funded by the PHA.

A manual in quality standards in substance use education.

A Manual in Quality Standards in Substance Use Education is published by The Drug Education Workers Forum (DEWF). The manual looks at different areas of substance use education, such as schools, youth work and community settings, and provides clear information on the best practice for delivering such education.This resource was contributed by The National Documentation Centre on Drug Use.

Quality Standards for the Delivery of Specialist Stop Smoking Services in Northern Ireland September 2011

Cigarette smoking is the major cause of preventable ill health in Northern Ireland. It accounts for 2400 premature deaths every year. Fifty percent or one in every two smokers will die prematurely due to their addiction; many will suffer chronic ill health and poor quality of life before their death (DHSSPS, 2007; ASH, 2008). Approximately 340,000 people smoke in Northern Ireland or 24% of the population over 16yrs. The Public Health Agency (PHA) commissions specialist stop smoking services across Northern Ireland. It has enabled the establishment of specialist stop smoking services in a range of settings including GP practices, pharmacies, hospitals and community settings. Tobacco control activities are overseen locally by the PHA's Tobacco Control Groups. The multi-agency groups oversee and advise on tobacco control initiatives.All stop smoking services are required to comply with the requirements of 18 standards. This report highlights the standards.

NRS State Data Quality Standards Checklist, 2002

The NRS state data quality standards identify the policies, processes and materials that states and local programs should have in place to collect valid and reliable data for the National Reporting System (NRS). The Division of Adult Education (DAEL) within the Office of Vocational and Adult Education developed the standards to define the characteristics of high quality state and local data collection systems for the NRS. The standards provide an organized way for DAEL to understand the quality of NRS data collection within the states and also provide guidance to states on how to improve their systems. States are to complete this checklist, which incorporates the standards, with their annual NRS data submission to rate their level of implementation of the standards. The accompanying policy document describes DAEL’s requirements for state conformance to the standards and explains the use of the information from this checklist.

Development of Quality Standards for Inclusion of High Recycled Asphalt Pavement Content in Asphalt Mixtures – Phase II, TR-658, 2015

To conserve natural resources and energy, the amount of recycled asphalt pavement has been steadily increasing in the construction of asphalt pavements. The objective of this study is to develop quality standards for inclusion of high RAP content. To determine if the higher percentage of RAP materials can be used on Iowa’s state highways, three test sections with target amounts of RAP materials of 30%, 35% and 40% by weight were constructed on Highway 6 in Iowa City. To meet Superpave mix design requirements for mixtures with high RAP contents, it was necessary to fractionate the RAP materials. Three test sections with actual RAP materials of 30.0%, 35.5% and 39.2% by weight were constructed and the average field densities from the cores were measured as 95.3%, 94.0%, and 94.3%, respectively. Field mixtures were compacted in the laboratory to evaluate moisture sensitivity using a Hamburg Wheel Tracking Device. After 20,000 passes, rut depths were less than 3mm for mixtures obtained from three test sections. The binder was extracted from the field mixtures from each test section and tested to identify the effects of RAP materials on the performance grade of the virgin binder. Based on Dynamic Shear Rheometer and Bending Beam Rheometer tests, the virgin binders (PG 64-28) from test sections with 30.0%, 35.5% and 39.2% RAP materials were stiffened to PG 76-22, PG 76-16, and PG 82-16, respectively. The Semi-Circular Bending (SCB) test was performed on laboratory compacted field mixtures with RAP amounts of 30.0%, 35.5% and 39.2% at two different temperatures of -18 and -30 °C. As the test temperature decreased, the fracture energy decreased and the stiffness increased. As the RAP amount increased, the stiffness increased and the fracture energy decreased. Finally, a condition survey of the test sections was conducted to evaluate their short-term pavement performance and the reflective transverse cracking did not increase as RAP amount was increased from 30.0% to 39.2%.

Development of Quality Standards for Inclusion of High Recycled Asphalt Pavement Content in Asphalt Mixtures, TR-624, 2012

The main objective of this research is to examine the effects that different methods of RAP stockpile fractionation would have on the volumetric mix design properties for high-RAP content surface mixes, with the goal of meeting all specified criteria for standard HMA mix designs. To determine the distribution of fine aggregates and binder in RAP stockpile, RAP materials were divided by each sieve size. The composition of RAP materials retained on each sieve was analyzed to determine the optimum fractionation method. Fractionation methods were designed to separate the stockpile at a specified sieve size to control the amount of fine RAP materials which contain higher amounts of fine aggregates and dust contents. These fine RAP materials were used in reduced proportions or completely eliminated, thereby decreasing the amount of fine aggregate materials introduced to the mix. Mix designs were performed using RAP materials from four different stockpiles and the two fractionated methods were used with high-RAP contents up to 50% by virgin binder replacement. By using a fractionation method, a mix with up to 50% RAP was successfully designed while meeting all Superpave criteria and asphalt film thickness requirement by controlling the dust content from RAP stockpiles.

Quality standards in e-business software development

Large enterprises have for many years employed eBusiness solutions in order to improve their efficiency. Smaller companies, however, have not been able to leverage these technologies due to the high level of know-how and resources required in implementing them. To solve this, novel software services are being developed to facilitate eBusiness adoption for the small enterprise with the aim of making B2Bi feasible not only between large organisations but also between trading partners of all sizes. The objective of this study was to find what standards and techniques on eBusiness and software testing and quality assurance fit best for building these new kinds of software considering the requirements their unique eBusiness approach poses. The research was conducted as a literature study with focus on standards on software testing and quality assurance together with standards on eBusiness. The study showed that the current software testing and quality assurance standards do not possess such characteristics as would make select standards evidently better fitted for building this type of software, which were established to be best developed as web services in order for them to meet their requirements. A selection of eBusiness standards and technologies was proposed to support this approach. The main finding in the study was, however, that these kinds of web services that have high interoperability requirements will have to be able to carry out automated interoperability and conformance testing as part of their operation; this objective dictates how the software are built and how testing during software development is to be done. The study showed that research on automated interoperability and conformance testing for web services is still limited and more research is needed to make the building of highly-interoperable web services more feasible.

Fishery Commodity Chain Trap vis-à-vis Global Quality Standards: An Analysis of the Kerala Marine Fishery

The article examines the commodity chain trap of marine fishery in Kerala, at both material and value terms, and its ramifications in the globalised fishery chains. The marketing chains both material and value, are very complex in nature since they involve many types of markets and large number of intermediaries and participants. The article also scrutinizes the sensitivity of consumers’ and country’s responses in terms of dietary and hygienic standards relating to seafood trade. In addition, it discusses the devastating effect about the recent stipulations like the US Bio- Terrorism Act and Shrimp anti-dumping duty on the Kerala fishery products

The impact of broadband quality standards on internet services market structure in Colombia

This paper develops a structural model which allows estimating the impact of regulatory decisions looking for the setting of download-speed standards on market structure and performance. We characterize a setting under which quality standards improve both service quality and availability. As to quality, we evaluate the impact of quality standards on the performance of local demand from a detailed database of broadband internet subscribers, discriminated by the main attributes of an internet subscription contract as location, supplier, monthly-fee, download- and upload-speed features. From these results, we are able to identify the effect of quality regulation on the behavior of internet providers in a differentiated product market approach. As a consequence, we are able to assert that the response of internet service providers to quality regulation is a more intense product differentiation that contributes to demand expansion and therefore to improve broadband penetration indicators.

Career teachers and quality standards : an interactive approach. 'Profesores de educación para la carrera (secundaria) y estándares de calidad : un enfoque interactivo'.

Resumen basado en el de la publicación. Con el apoyo económico del departamento MIDE de la UNED