Industry energy optimization: A case study in a biodiesel production site

This paper presents a case study of heat exchanger network (HEN) retrofit with the objective to reduce the utilities consumption in a biodiesel production process. Pinch analysis studies allow determining the minimum duty utilities as well the maximum of heat recovery. The existence of heat exchangers for heat recovery already running in the process causes a serious restriction for the implementation of grassroot HEN design based on pinch studies. Maintaining the existing HEN, a set of alternatives with additional heat exchangers was created and analysed using some industrial advice and selection criteria. The final proposed solution allows to increase the actual 18 % of recovery heat of the all heating needs of the process to 23 %, with an estimated annual saving in hot utility of 35 k(sic)/y.

Radioactive waste management : a bibliography of publicly available literature pertaining to the USAEC's Savannah River, S.C., production site /

Mode of access: Internet.

Radioactive waste management : a bibliography of publicly available literature pertaining to the USAEC's Hanford, Washington Production Site /

"August 1973."

Process planning methodology: dynamic short-term planning for off-site construction in Slovenia

Planning is a vital element of project management but it is still not recognized as a process variable. Its objective should be to outperform the initially defined processes, and foresee and overcome possible undesirable events. Detailed task-level master planning is unrealistic since one cannot accurately predict all the requirements and obstacles before work has even started. The process planning methodology (PPM) has thus been developed in order to overcome common problems of the overwhelming project complexity. The essential elements of the PPM are the process planning group (PPG), including a control team that dynamically links the production/site and management, and the planning algorithm embodied within two continuous-improvement loops. The methodology was tested on a factory project in Slovenia and in four successive projects of a similar nature. In addition to a number of improvement ideas and enhanced communication, the applied PPM resulted in 32% higher total productivity, 6% total savings and created a synergistic project environment.

The spaces of the Wednesday Play (BBC TV 1964–1970): production, technology and style

The BBC television drama anthology The Wednesday Play, broadcast from 1964-70 on the BBC1 channel, was high-profile and often controversial in its time and has since been central to accounts of British television’s ‘golden age’. This article demonstrates that production technologies and methods were more diverse at that time than is now acknowledged, and that The Wednesday Play dramas drew both approving but also very critical responses from contemporary viewers and professional reviewers. This article analyses the ways that the physical spaces of production for different dramas in the series, and the different technologies of shooting and recording that were adopted in these production spaces, are associated with but do not determine aesthetic style. The adoption of single-camera location filming rather than the established production method of multi-camera studio videotaping in some of the dramas in the series has been important to The Wednesday Play’s significance, but each production method was used in different ways. The dramas drew their dramatic forms and aesthetic emphases from both theatre and cinema, as well as connecting with debates about the nature of drama for television. Institutional and regulatory frameworks such as control over staff working away from base, budgetary considerations and union agreements also impacted on decisions about how programmes were made. The article makes use of records from the BBC Written Archives Centre, as well as published scholarship. By placing The Wednesday Play in a range of overlapping historical contexts, its identity can be understood as transitional, differentiated and contested.

Localization and production of peptide endocannabinoids in the rodent CNS and adrenal medulla.

The endocannabinoid system (ECS) comprises the cannabinoid receptors CB1 and CB2 and their endogenous arachidonic acid-derived agonists 2-arachidonoyl glycerol and anandamide, which play important neuromodulatory roles. Recently, a novel class of negative allosteric CB1 receptor peptide ligands, hemopressin-like peptides derived from alpha hemoglobin, has been described, with yet unknown origin and function in the CNS. Using monoclonal antibodies we now identified the localization of RVD-hemopressin (pepcan-12) and N-terminally extended peptide endocannabinoids (pepcans) in the CNS and determined their neuronal origin. Immunohistochemical analyses in rodents revealed distinctive and specific staining in major groups of noradrenergic neurons, including the locus coeruleus (LC), A1, A5 and A7 neurons, which appear to be major sites of production/release in the CNS. No staining was detected in dopaminergic neurons. Peptidergic axons were seen throughout the brain (notably hippocampus and cerebral cortex) and spinal cord, indicative of anterograde axonal transport of pepcans. Intriguingly, the chromaffin cells in the adrenal medulla were also strongly stained for pepcans. We found specific co-expression of pepcans with galanin, both in the LC and adrenal gland. Using LC-MS/MS, pepcan-12 was only detected in non-perfused brain (∼40 pmol/g), suggesting that in the CNS it is secreted and present in extracellular compartments. In adrenal glands, significantly more pepcan-12 (400-700 pmol/g) was measured in both non-perfused and perfused tissue. Thus, chromaffin cells may be a major production site of pepcan-12 found in blood. These data uncover important areas of peptide endocannabinoid occurrence with exclusive noradrenergic immunohistochemical staining, opening new doors to investigate their potential physiological function in the ECS. This article is part of a Special Issue entitled 'Fluorescent Neuro-Ligands'.

Environmental life cycle assessment of concrete made with fine recycled concrete aggregates

The majority of worldwide structures use concrete as its main material. This happens because concrete is economically feasible, due to its undemanding production technology and case Of use. However, it is widely recognized that concrete production has a strong environmental impact in the planet. Natural aggregates use is one of the most important problems of concrete production nowadays, since they are obtained from limited, and in some countries scarce, resources. In Portugal, although there are enough stone quarries to cover coarse aggregates needs for several more years, Supplies of fine aggregates are becoming scarcer, especially in the northern part of the country. On the other hand, as concrete structures' life cycle comes to an end, an urgent need emerges to establish technically and economically viable solutions for demolition debris, other than for use as road base and quarry fill. This paper presents a partial life cycle assessment (LCA) of concrete made with fine recycled concrete aggregates performed with EcoConcrete tool. EcoConcrete is a tailor-made, interactive, learning and communications tool promoted by the Joint Project Group (JPG) on the LCA of concrete, to qualify and quantify the overall environment impact of concrete products. It consists of an interactive Excel-spreadsheet in which several environmental inputs (material quantities, distances from origin to production Site, production processes) and outputs (material, energy, emissions to air, water, soil or waste) are collected in a life cycle inventory, and are then processed to determine the environmental impact (assessment) of the analysed concrete, in terms of ozone layer depletion, smog or "greenhouse" effect.

Procurement, Quality and Productivity Enhancements and Manufacturing Strategy Formulation Applying Product Life Cycle Method

The objective of the thesis was to create a framework that can be used to define a manufacturing strategy taking advantage of the product life cycle method, which enables PQP enhancements. The starting point was to study synkron implementation of cost leadership and differentiation strategies in different stages of the life cycles. It was soon observed that Porter’s strategies were too generic for the complex and dynamic environment where customer needs deviate market and product specifically. Therefore, the strategy formulation process is based on the Terry Hill’s order-winner and qualifier concepts. The manufacturing strategy formulation is initiated with the definition of order-winning and qualifying criteria. From these criteria there can be shaped product specific proposals for action and production site specific key manufacturing tasks that they need to answer in order to meet customers and markets needs. As a future research it is suggested that the process of capturing order-winners and qualifiers should be developed so that the process would be simple and streamlined at Wallac Oy. In addition, defined strategy process should be integrated to the PerkinElmer’s SGS process. SGS (Strategic Goal Setting) is one of the PerkinElmer’s core management processes. Full Text: Null

Sanitary quality of edible bivalve mollusks in Southeastern Brazil using an UV based depuration system

The increase in seafood production, especially in mariculture worldwide, has brought out the need of continued monitoring of shellfish production areas in order to ensure safety to human consumption. The purpose of this research was to evaluate pathogenic protozoa, viruses and bacteria contamination in oysters before and after UV depuration procedure, in brackish waters at all stages of cultivation and treatment steps and to enumerate microbiological indicators of fecal contamination from production site up to depuration site in an oyster cooperative located at the Southeastern estuarine area of Brazil. Oysters and brackish water were collected monthly from September 2009 to November 2010. Four sampling sites were selected for enteropathogens analysis: site 1- oyster growth, site 2- catchment water (before UV depuration procedure), site 3 - filtration stage of water treatment (only for protozoa analysis) and site 4- oyster's depuration tank. Three microbiological indicators ! were examined at sites 1, 2 and 4. The following pathogenic microorganisms were searched: Giardia cysts, Cryptosporidium oocysts, Human Adenovirus (HAdV), Hepatitis A virus (HAV), Human Norovirus (HnoV) (genogroups I and II), JC strain Polyomavirus (JCPyV) and Salmonella sp. Analysis consisted of molecular detection (qPCR) for viruses (oysters and water samples); immunomagnetic separation followed by direct immunofluorescence assay for Cryptosporidium oocysts and Giardia cysts and also molecular detection (PCR) for the latter (oysters and water samples); commercial kit (Reveal-Neogee (R)) for Salmonella analysis (oysters). Giardia was the most prevalent pathogen in all sites where it was detected: 36.3%, 18.1%, 36.3% and 27.2% of water from sites 1, 2, 3 and 4 respectively; 36.3% of oysters from site 1 and 54.5% of depurated oysters were harboring Giardia cysts. The huge majority of contaminated samples were classified as Giardia duodenalis. HAdv was detected in water and o! ysters from growth site and HnoV GI in two batches of oysters ! (site 1) in huge concentrations (2.11 x 10(13), 3.10 x 10(12) gc/g). In depuration tank site, Salmonella sp., HAV (4.84 x 10(3)) and HnoV GII (7.97 x 10(14)) were detected once in different batches of oysters. Cryptosporidium spp. oocysts were present in 9.0% of water samples from site four. These results reflect the contamination of oysters even when UV depuration procedures are employed in this shellfish treatment plant. Moreover, the molecular comprehension of the sources of contamination is necessary to develop an efficient management strategy allied to shellfish treatment improvement to prevent foodborne illnesses. (C) 2011 Elsevier Ltd. All rights reserved.

Tuotannon tunnuslukujen analysointi ja kehittäminen kourukoneilla

Sisäisen suorituskyvyn tehostaminen on yrityksille jatkuvan kehityksen prosessi. Diplomityön tarkoituksena oli selvittää Paroc Oy Ab:n kourukoneiden suorituskykymittarit sekä analysoida ja kehittää niitä. Lisäksi selvitettiin suorituskykyä kuvaavat raporttimallit eri tuotantopaikkakunnilta ja kehitettiin niitä. Teoriaosuudessa kerrotaan, mitä suorituskyvyllä tarkoitetaan sekä käydään läpi sen eri osa-alueita. Siinä esitetään myös suorituskyvyn mittaamista sekä kuinka mittareita suunnitellaan ja rakennetaan. Työn painopiste on kuitenkin empiirisessä osuudessa, jossa ensin kerrotaan työn kohteena olevien kourukoneiden tuotantoprosessi ja tämän jälkeen paneudutaan suorituskykymittareihin ja niiden analysointiin sekä raporttimalleihin. Lopuksi esitetään työn aikana esille nousseita kehitysehdotuksia. Tunnuslukujen selvittämisen tuloksena havaittiin, että kirjallisuus tukee käytössä olevia mittareita. Työssä kerättiin tuotantodataa kourukoneilta usean vuoden aikajaksolta. Datasta valmisteltiin mallit, joita käytettiin mittarien analysointiin. Analysoinnin tuloksena kävi ilmi, että mittarien tarjoama tieto oli joiltakin osin puutteellista ja näin ollen päätöksentekijälle harhaanjohtavaa. Raporttimallit eivät olleet yhtenäisiä paikkakuntien välillä, mikä toi epävarmuutta tuloksiin laskentaperiaatteiden osalta. Työn lopputuloksena tehtiin käytössä oleville suorituskykymittareille kehitysehdotuksia tarkemman ja laadukkaamman tiedon takaamiseksi. Työssä esitettiin myös uusia mittariehdotuksia. Raporttimallit yhtenäistettiin uuden tuotannonohjausjärjestelmän tuomien mahdollisuuksien myötä.

Zoning of the commercial poultry industry in Ontario as a method of avian influenza mitigation

L’Organisation mondiale de la santé animale (OIE) est l’institution internationale responsable de la mise en place des mesures sanitaires associées aux échanges commerciaux d’animaux vivants. Le zonage est une méthode de contrôle recommandée par l’OIE pour certaines maladies infectieuses, dont l’influenza aviaire. Les éclosions d’influenza aviaire été extrêmement coûteuses pour l’industrie avicole partout dans le monde. Afin d’évaluer la possibilité d’user de cette approche en Ontario, les données sur les sites de production avicole ont été fournies par les fédérations d’éleveurs de volailles ce cette province. L’information portant sur les industries associées à la production avicole, soit les meuneries, les abattoirs, les couvoirs, et les usines de classification d’œufs, a été obtenue par l’entremise de plusieurs sources, dont des représentants de l’industrie avicole. Des diagrammes de flux a été crée afin de comprendre les interactions entre les sites de production et les industries associées à ceux-ci. Ces industries constituaient les éléments de bas nécessaires au zonage. Cette analyse a permis de créer une base de données portant sur intrants et extrants de production pour chaque site d’élevage avicole, ainsi que pour les sites de production des industries associées à l’aviculture. À l’aide du logiciel ArcGIS, cette information a été fusionnée à des données géospatiales de Statistique Canada de l’Ontario et du Québec. La base de données résultante a permis de réaliser les essais de zonage. Soixante-douze essais ont été réalisés. Quatre ont été retenus car celles minimisaient de façon similaire les pertes de production de l’industrie. Ces essais montrent que la méthode utilisée pour l’étude du zonage peut démontrer les déficits et les surplus de production de l’industrie avicole commerciale en Ontario. Ceux-ci pourront servir de point de départ lors des discussions des intervenants de l’industrie avicole, étant donné que la coopération et la communication sont essentielles au succès du zonage.

Realism and politics in alienated space: Trevor Griffiths's plays of the 1970s in the television studio

The television studio play is often perceived as a somewhat compromised, problematic mode in which spatial and technological constraints inhibit the signifying and aesthetic capacity of dramatic texts. Leah Panos examines the function of the studio in the 1970s television dramas of socialist playwright Trevor Griffiths, and argues that the established verbal and visual conventions of the studio play, in its confined and ‘alienated’ space, connect with and reinforce various aspects of Griffiths's particular approach and agenda. As well as suggesting ways in which the idealist, theoretical focus of the intellectual New Left is reflexively replicated within the studio, Panos explores how the ‘intimate’ visual language of the television studio allows Griffiths to create a ‘humanized’ Marxist discourse through which he examines dialectically his dramatic characters' experiences, ideas, morality, and political objectives. Leah Panos recently completed her doctoral thesis, ‘Dramatizing New Left Contradictions: Television Texts of Ken Loach, Jim Allen, and Trevor Griffiths’, at the University of Reading and is now a Postdoctoral Researcher on the AHRC funded project, ‘Spaces of Television: Production, Site and Style’, which runs from July 2010 to March 2014.

Translocação orgânica, produtividade e rendimento de óleo essencial de Mentha piperita L. cultivada em solução nutritiva com variação dos níveis de N, P, K e Mg

O estudo objetivou avaliar translocação orgânica, índices fisiológicos da análise de crescimento e rendimento do óleo essencial de Mentha piperita L. cultivada em solução nutritiva com variação dos níveis de N, P, K e Mg. Assim, foram avaliados os quatro tratamentos contendo 50% N, P, K, 25% Mg; 50% N, P, K, Mg; 65%N, 50%P, 25%K, 100% Mg e 100% N, P, K, Mg. A translocação orgânica foi avaliada por meio da determinação da razão de massa foliar (RMF) e da distribuição de massa seca para os diferentes órgãos. Os índices fisiológicos razão de área foliar (RAF), área foliar específica (AFE), taxa assimilatória líquida (TAL) e taxa de crescimento relativo (TCR) derivadas que compõem a análise de crescimento foram estimados pelo programa ANACRES, após ajuste exponencial quadrático da área foliar e massa seca de lâminas foliares e total da planta em relação ao tempo. O rendimento do óleo essencial, em porcentagem, foi calculado após extração da parte aérea por hidrodestilação. As plantas submetidas ao tratamento com nível completo de nutrientes (100%N/P/K/Mg) exportaram com menor eficiência o material orgânico a partir da folha e a RMF mostrou queda mais lenta, devido à retenção desse material por mais tempo no local de sua produção. Além disso, não apresentaram melhor produtividade e as curvas da TAL e TCR mostraram quedas mais lentas. As plantas submetidas ao tratamento com 65%N/50%P/25%K/100%Mg revelaram adequada exportação de matéria orgânica da folha para caule e pecíolos, conforme demonstra a RMF e a distribuição de massa seca para esses órgãos. Revelaram ainda a RAF mais elevada no inicio do desenvolvimento e mais baixa aos 94 DAT, indicando sombreamento das folhas como resultado de seu crescimento. A AFE dessas plantas mostrou menor variação durante o ciclo, refletindo espessura mais constante de suas folhas. A TAL e a TCR apresentaram curvas decrescentes, com quedas bem acentuadas em relação às demais plantas. Todos esses índices indicam melhor produtividade das plantas submetidas ao tratamento 65%N/50%P/25%K/100%Mg, que também apresentaram rendimento de óleo essencial, em média, maior durante o ciclo. Conclui-se que a redução de 35% de N, 50% de P, 75% de K (65%N/50%P/25%K/100%Mg) é indicada para o cultivo e extração de óleo essencial de M. piperita.

Influência do cultivo de camarões marinhos em tanque-rede sobre a qualidade da água e a estrutura da comunidade zooplanctônica na Baía de Guaratuba, Paraná

Objetivou-se com este estudo avaliar os impactos ambientais causados por um sistema de cultivo de camarões marinhos em tanque-rede sobre a qualidade da água e sobre a estrutura da comunidade zooplanctônica. O estudo foi realizado na Baía de Guaratuba, onde os cultivos eram realizados em 300 tanques-rede (3,6 m de comprimento, 3,6 m de largura e 2 m de profundidade) distribuídos em uma área de 4.200 m², em densidade de 720 camarões/m². As concentrações de amônia, nitrito e fosfato na água foram monitoradas e amostras de zooplâncton foram coletadas no local dos cultivos (ponto 1) e em outros três pontos localizados a aproximadamente 200 m para oeste, noroeste e sudeste dos tanques. O ponto 5, usado como controle, localizava-se a aproximadamente 1.000 m a sudoeste da área de produção. As concentrações de nitrogênio amoniacal, nitrito e fosfato não diferiram entre os pontos amostrados, assim como a estrutura da comunidade zooplanctônica, que foi semelhante entre os pontos amostrados. Não foram evidenciados impactos significativos do empreendimento sobre a qualidade da água ou sobre estrutura das comunidades zooplanctônicas no local do cultivo e em áreas adjacentes, durante o período em que a investigação foi conduzida.

Neonatal immune response of Brazilian beef cattle to vaccination with Clostridium botulinum toxoids types C and D by indirect ELISA

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)