The effect of four cooking pressures on the retention of palatability and ascorbic acid in fresh and frozen broccoli, and folic acid in frozen broccoli. Report on special problem.

Mode of access: Internet.

Demi-glace-kastikepohjan valmistuksen optimointi ylipainekeittomenetelmälle

Tämän tutkimuksen kirjallisuusosan tavoitteena oli selvittää perinteisen kastikepohjan valmistukseen ja valmistuksen kokonaisvaltaiseen onnistumiseen vaikuttavia seikkoja. Lisäksi käsiteltiin kastikepohjan valmistukseen liittyviä ympäristö- ja energia-asioita, kuten eläinperäisten sivutuotteiden kierrätysmahdollisuuksia. Kokeellisessa osassa tutkimuksen keskeinen lähtökohta oli pyrkiä löytämään ratkaisu ylipainekeittomenetelmään liittyvään kastikepohjan liemiaineksen sameutumisongelmaan. Tutkimuksessa haluttiin löytää syyt sameuden muodostumiseen luiden painekeitossa (max. 1,5 bar). Näin pyrittiin selvittämään keinot sameuden syntymisen estämiseen tai tuotteesta poistamiseen. Ratkaisua etsittiin sekä keittoaika-paine-kombinaatiosta että proteolyyttisen entsyymivalmisteen käytöstä. Tavoitteena oli ulkonäöltään kirkas ja kuiva-ainepitoisuudeltaan mahdollisimman korkea naudanmakuinen demi-glace-kastikepohjaliemi. Liemiaineksista tarkasteltiin kuiva-aine-, kokonaisproteiini- ja sidekudosproteiinipitoisuuksia, pH-arvoja sekä sameutta, ja vertailtiin näitä tuloksia käytettyihin valmistusmenetelmiin ja -olosuhteisiin. Lisäksi otettiin selvää lämmöntalteenoton parantamis-mahdollisuuksista. Tutkimuksessa valmistetun kastikepohjaliemen kuiva-aine koostui pääasiassa proteiineista. Liemen valmistuksessa suuremmalla paineella päästiin hieman nopeammin samoihin kuiva-ainepitoisuuksiin kuin matalammalla paineella. Samoin tapahtui entsyymiä käytettäessä kuin käyttämättä jätettäessä. Tämän tutkimuksen perusteella korkeaa kuiva-ainepitoisuutta tavoiteltaessa kastikepohjaliemen valmistuksessa on valittava korkean sidekudosproteiinin tai sameuden väliltä. Ylipainekeitolla luista saatiin irti lähes pelkästään sidekudosproteiinia, koska luita kuumennettaessa vain kollageeni liukeni veteen muiden proteiinien saostuessa. Lämmöntalteenottojärjestelmien rakentaminen pieneen elintarviketeollisuusyritykseen voi olla kannattamatonta, koska investointikustannuksia ei välttämättä pystytä maksamaan takaisin. Energiatehokkuuden parantaminen pienessä elintarviketeollisuusyrityksessä on haastavaa, mutta kuitenkin mahdollista ammattilaisten tekemien tarkkojen laskelmien ja arviointien avulla.

Effectiveness inactivation of trypsin inhibitor fron brazilian cultivarof beans (Phaseolus vulgaris L.)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effectveness inactivation of trypsin inhibitor from brazilian cultivars of beans (Phaseolus vulgaris L.)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Autenticazione d’origine, stima della Freshness quality e studio del profilo nutrizionale come elementi fondanti per la valorizzazione dell’alimento ittico

Questa tesi è dedicata alla qualità dell'alimento ittico in tre delle sue possibili accezioni. Dopo aver spiegato il complicato rapporto del consumatore con gli alimenti ittici e come l'Unione Europea abbia cercato di fare chiarezza al riguardo, gli argomenti di discussione saranno: Autenticazione d'origine La polpa di 160 esemplari di spigola (Dicentrachus labrax), suddivisi tra selvatici, allevati intensivamente e allevati estensivamente, provenienti dall'Italia e dall'estero per un totale di 18 fonti indagate, è stati analizzata individualmente per caratterizzarne la componente lipidica, isotopica e minerale e verificare le potenzialità di queste informazioni ai fini della autenticazione di origine in senso lato. Stima della Freshness Quality Numerosi lotti di seppia (Sepia officinalis), nasello (Merluccius merluccius) e triglia di fango (Mullus barbatus) sono stati sottoposti a due possibili modalità di stoccaggio sotto ghiaccio fondente, per indagare come, nell’arco della loro vita commerciale, ne evolvessero importanti connotati chimici (cataboliti dell’ATP e loro rapporti), fisici (proprietà dielettriche dei tessuti) e sensoriali (Quality Index Methods specie-specifici. Studio del profilo nutrizionale La componente lipidica di numerosi lotti di mazzancolla (Penaeus kerathurus), canocchia (Squilla mantis) e seppia (Sepia officinalis) è stata caratterizzata allo stato crudo e dopo cottura secondo tecniche “dedicate” per stabilire il contributo di queste matrici come fonte di acidi grassi polinsaturi della serie omega 3 e per pervenire alla determinazione dei loro coefficienti di ritenzione vera.

Maids' and matrons' cook book : 600 choice and tested recipes /

Includes household hints, home remedies, and samples of menus. Sample recipes: Dry sugar cure for pork, Cheese macaroni, Flaky pie crust.

La manière d'amolir les os, et de faire cuire toutes sortes de viandes en fort peu de temps, & à peu de frais ...

Mode of access: Internet.

High pressure induced water uptake characteristics of Thai glutinous rice

Glutinous rice (or sticky rice) has to be soaked in water over an extended period of time before cooking. Soaking provides some of the water needed for starch gelatinisation to occur during cooking. The extent of water uptake during soaking is known to be influenced by temperature. This paper explores the use of very high pressures up to 600 MPa to accelerate water uptake kinetics during soaking. Changes occurring in length, diameter and moisture content were determined as a function of soaking time, pressure and temperature. The results show that length and diameter are positively correlated with all three parameters. However, the expansion ratios are not very high: the maximum length expansion ratio observed was 1.2, while the maximum diameter expansion ratio was 1. 1. Given these low values, it was possible to model water uptake kinetics by using the well-known Fickian model applied to a finite cylinder, assuming uniform average dimensions and effective diffusion coefficient. The results showed that the overall rates of water uptake and the equilibrium moisture content increased with pressure and temperature. The effective diffusion coefficient, on the other hand, did not follow the same trend. Temperature influenced the effective diffusion coefficient below 300 MPa, but had a marginal effect at higher pressures. Moreover, the effective diffusion coefficient increased with temperature between 20 and 50 degrees C, but dropped at higher temperatures. This drop can be attributed to the gelatinisation of starch, which restricts the transport of water. Regardless, it is possible to increase the quantity of water absorbed by rice and the rate at which it is absorbed, by using high pressures and temperatures. (c) 2004 Elsevier Ltd. All rights reserved.

Water characteristics in cooked beef as influenced by ageing and high-pressure treatment -an NMR micro imaging study

The water characteristics in cooked pressure-heat treated (45 degreesC for 45 min prior to pressurisation at 150 MPa for 30 min) and non-pressurised, cooked (control) samples of beef Longissimus aged for 1, 3, 8 or 16 days were studied by nuclear magnetic resonance microscopy. A multi-echo sequence was used to obtain T2 images, and independent of ageing period, the T2 values were found to be lower in pressure-heat treated meat revealing alterations in water characteristics of pressure-treated, cooked meat compared with cooked meat. With increasing ageing duration, the T2 values in both pressure-treated, cooked and cooked meat decreased indicating that the water became more tightly trapped in the protein network. In addition, independent of length of ageing period the relationship between cooking loss in the cooked meat and transverse relaxation differed between non-pressurised and pressure-treated meat. which reveals that the mechanisms changing the water properties in beef during ageing are different from those occuring during pressure-heat treatment of meat. (C) 2003 Elsevier Ltd. All rights reserved.

Wheat grain cooking process as investigated by modulated temperature differential scanning calorimetry

The thermal properties of soft and hard wheat grains, cooked in a steam pressure cooker, as a function of cooking temperature and time were investigated by modulated temperature differential scanning calorimetry (MTDSC). Four cooking temperatures (110, 120, 130 and 140 degrees C) and six cooking times (20, 40, 60, 80, 100 and 120 min) for each temperature were studied. It was found that typical non-reversible heat flow thermograms of cooked and uncooked wheat grains consisted of two endothermic baseline shifts localised around 40-50 degrees C and then 60-70 degrees C. The second peaks of non-reversible heat flow thermograms (60-70 degrees C) were associated with starch gelatinisation. The degree of gelatinisation was quantified based on these peaks. In this study, starch was completely gelatinised within 60-80 min for cooking temperatures at 110-120 degrees C and within 20 min for cooking temperatures at 130-140 degrees C. MTDSC detected reversible endothermic baseline shifts in most samples, localised broadly around 48-67 degrees C with changes in heat capacity ranging from 0.02 to 0.06 J/g per degrees C. These reversible endothermic baseline shifts are related to the glass transition, which occurs during starch gelatinisation. Data on the specific heat capacity of the cooked wheat samples are provided. (C) 2005 Elsevier Ltd. All rights reserved.

Combustion and emission characteristics of a typical biodiesel engine operated on waste cooking oil derived biodiesel

Waste cooking oils can be converted into fuels to provide economical and environmental benefits. One option is to use such fuels in stationary engines for electricity generation, co-generation or tri-generation application. In this study, biodiesel derived from waste cooking oil was tested in an indirect injection type 3-cylinder Lister Petter biodiesel engine. We compared the combustion and emission characteristics with that of fossil diesel operation. The physical and chemical properties of pure biodiesel (B100) and its blends (20% and 60% vol.) were measured and compared with those of diesel. With pure biodiesel fuel, full engine power was achieved and the cylinder gas pressure diagram showed stable operation. At full load, peak cylinder pressure of B100 operation was almost similar to diesel and peak burn rate of combustion was about 13% higher than diesel. For biodiesel operation, occurrences of peak burn rates were delayed compared to diesel. Fuel line injection pressure was increased by 8.5-14.5% at all loads. In comparison to diesel, the start of combustion was delayed and 90% combustion occurred earlier. At full load, the total combustion duration of B100 operation was almost 16% lower than diesel. Biodiesel exhaust gas emissions contained 3% higher CO2 and 4% lower NOx, as compared to diesel. CO emissions were similar at low load condition, but were decreased by 15 times at full load. Oxygen emission decreased by around 1.5%. Exhaust gas temperatures were almost similar for both biodiesel and diesel operation. At full engine load, the brake specific fuel consumption (on a volume basis) and brake thermal efficiency were respectively about 2.5% and 5% higher compared to diesel. Full engine power was achieved with both blends, and little difference in engine performance and emission results were observed between 20% and 60% blends. The study concludes that biodiesel derived from waste cooking oil gave better efficiency and lower NOx emissions than standard diesel. Copyright © 2012 SAE International.

The effect of triacetin as a fuel additive to waste cooking biodiesel on engine performance and exhaust emissions

This study investigates the effect of oxygenated fuels on engine performance and exhaust emission under a custom cycle using a fully instrumented 6-cylinder turbocharged diesel engine with a common railinjection system. A range of oxygenated fuels based on waste cooking biodiesel with triacetin as an oxygenated additive were studied. The oxygen ratio was used instead of the equivalence ratio, or air to fuelratio, to better explain the phenomena observed during combustion. It was found that the increased oxygen ratio was associated with an increase in the friction mean effective pressure, brake specific fuel consumption, CO, HC and PN. On the other hand, mechanical efficiency, brake thermal efficiency, CO2, NOx and PM decreased with oxygen ratio. Increasing the oxygen content of the fuel was associated with a decrease in indicated power, brake power, indicated mean effective pressure, brake mean effective pressure, friction power, blow-by, CO2, CO (at higher loads), HC, PM and PN. On the other hand, the brakespecific fuel consumption, brake thermal efficiency and NOx increased by using the oxygenated fuels. Also, by increasing the oxygen content, the accumulation mode count median diameter moved toward the smaller particle sizes. In addition to the oxygen content of fuel, the other physical and chemical properties of the fuels were used to interpret the behavior of the engine.