Delayed replantation of rat teeth after use of reconstituted powdered milk as a storage medium

Minimal extraoral dry storage period and moist storage for the avulsed tooth are identified as key steps for the treatment protocol of tooth replantation. Among the possible moist storage media, bovine milk has stood out because of its capacity of preserving the integrity of the periodontal ligament (PDL) fibers. This condition has attracted the attention to investigate the use of powdered milk, which is one of the presentation forms of bovine milk, as a feasible storage medium in cases of delayed tooth replantation. The aim of this study was to evaluate the healing process after delayed replantation of rat teeth stored in reconstituted powdered milk and long shelf-life (ultra high temperature) whole milk. Forty maxillary right rat incisors were assigned to four groups (n = 10): group I - the teeth were extracted and immediately replanted into theirs sockets; group II - the teeth were stored for 60 min in 200 ml of freshly reconstituted powdered milk; group III - the teeth were stored for 60 min in 200 ml of long shelf-life whole milk; group IV - the teeth were kept dry for the same time. All procedures were performed at room temperature. Next, the root canals of teeth in groups II, III, and IV were instrumented, filled with a calcium hydroxide-based paste, and replanted into their sockets. All animals received systemic antibiotic therapy and were killed by anesthetic overdose 60 days after replantation. The pieces containing the replanted teeth were removed, fixed, decalcified, and paraffin-embedded. Semi-serial 6-mu m-thick sections were obtained and stained with hematoxylin and eosin for histomorphological analysis. There was statistically significant difference (P < 0.05) between groups I and IV regarding the presence of replacement resorption and PDL remnants on root surface. The powdered milk and long shelf-life whole milk presented similar results to each other and may be indicated as storage media for avulsed teeth.

Fluoride concentrations of milk, infant formulae, and soy-based products commercially available in Brazil

To assess the fluoride (F) content in commercially available milk formulae in Brazil and to estimate the F intake in children from this source in the first year of life. Samples of cow's milk (n = 51), infant formulae (n = 15), powdered milk (n = 13), and soy-based products (n = 4) purchased in Araçatuba (Brazil) had their F content measured using an ion-specific electrode, after hexamethyldisiloxane-facilitated diffusion. Powdered milk and infant formulae were reconstituted with deionized water, while ready-to-drink products were analyzed without any dilution. Using average infant body masses and suggested volumes of formula consumption for infants 1-12 months of age, possible F ingestion per body mass was estimated. Data were analyzed by descriptive analysis. Mean F content ranged from 0.02 to 2.52 mg/L in all samples. None of the cow's milk provided F intake higher than 0.07 mg/kg. However, two infant formulae, one powdered milk, and one soy-milk led to a daily F intake above the suggested threshold for fluorosis when reconstituted with deionized water. Assuming reconstitution of products with tap water at 0.7 ppm F, two infant formulae, five powdered milk, and four soymilks led to daily F intake ranging from 0.108 to 0.851 mg/kg. The results suggest that the consumption of some brands of infant formulae, powdered milk, and soy-based milk in the first year of age could increase the risk of dental fluorosis, reinforcing the need for periodic surveillance of the F content of foods and beverages typically consumed by young children.

Rearing of Clarias batrachus (Lin.) larvae with formulated diets

An experiment was carried out for a period of 20 days using 7-day old Clarias batrachus larvae of initial total length of 7.4 ± 0.49 mm and weight of 2.9 ± 0.83 mg. Three artificial diets were used for the study having three replication of each. Among these, diet-I was formulated using 20% fish meal (FM), 30% powdered milk and 30% boiled egg yolk (BEY), diet-II using 27% FM, 20% Baker’s yeast (BY), 30% BEY and 3% agar and diet-III using 20% FM, 20% BY and 45% whole egg. The larvae fed on diets-II and III showed significantly (P<0.05) better length and weight gain than those of the larvae fed on diet-I. The larvae fed on diet- III showed the best survival rate (70%). However, the condition factor of the larvae fed on diet I was significantly better than those of the larvae fed on other two diets. The results of the study showed that C. batrachus larvae could be successfully reared with diet containing 45% whole egg, 20% yeast and 20% fish meal.

Growth and survival of Clarias batrachus (Lin.) larvae fed on formulated diets

An experiment was conducted for a period of 28 days using 7-day old C. batrachus larvae of initial total length (±S.D.) of 7.4 ± 0.49 mm and weight (±S.D.) of 2.8 ± 0.75 mg. Five test diets viz. diets I, II, III, IV and V were prepared. Diet I was formulated using 30% fish meal (FM), 20% soybean meal (SM) and 20% Baker's yeast (BY), diet III using 15% FM, 20% SM, 15% cotton seed meal and 30% BY and diet IV using 20% FM, 30% BY and 30% powdered milk. The remaining two diets (diets II and V) were prepared using minced clam meat (96%) and BY (90%) respectively as the sole source of protein. Three replications were used for each treatment. The larvae fed on diet II exhibited significantly (P<0.05) better length gain and specific growth rate (SGR) than those of the larvae fed on diet III and there was no significant difference among the length gain and SGR of the larvae fed on diet I,II,IV and V. The larvae fed on diet II also showed significantly better weight gain and survival than those of the larvae fed on other diets. There was no significant difference between the condition factor of the larvae fed on diet II and IV. However, the larvae fed on diet II showed better condition factor than those of the larvae fed on other diets.

Estudo da presença de Mycobacterium avium subespécie paratuberculosis numa exploração leiteira no Litoral Centro de Portugal Continental

A Paratuberculose, conhecida também como Doença de Johne, é uma afeção infecciosa que provoca uma enterite granulomatosa crónica causada pelo agente Mycobacterium avium subespécie paratuberculosis (Map). É uma doença de carácter contagioso, de distribuição mundial, atingindo os mamíferos, particularmente os pequenos e grandes ruminantes, equinos, suínos, búfalos, coelhos, etc. Tem um grande impacto económico, nomeadamente na redução da produção leiteira, na redução dos teores de proteína no leite, na susceptibilidade a outras doenças, no refugo de animais e no aumento dos custos na sanidade. Pensa-se que também terá impacto a nível de Saúde Pública uma vez que o Map pode estar associado á doença de Crohn em humanos em que o leite cru, leite em pó ou leite pasteurizado podem ser os veículos de transmissão, porém não existem estudos suficientes para sustentar este acontecimento. A técnica de diagnóstico “Gold Standard” é a cultura microbiológica de fezes, no entanto é um procedimento muito demorado podendo levar até 4 meses para se observarem as colónias bacterianas, uma vez que o seu crescimento é muito lento. Deste modo, existem outros testes, tais como o PCR e ELISA, com elevada especificidade para o agente que fornecem resultados mais rápidos e que permitem minimizar os falsos-positivos, apesar da sua reduzida sensibilidade (por volta dos 50%). Este estudo é baseado na observação das instalações da exploração e consequente comparação com parâmetros analisados e documentados em literatura. Para além disso, são utilizadas informações fornecidas pelo Software da exploração com o intuito de estudar a incidência da Paratuberculose, ao longo dos anos, de modo a comprovar se as medidas de maneio e de higiene adotadas pela exploração afetada contribuem ou não de alguma maneira para o controlo/erradicaçãoda doença de Johne.

Environmental factors influencing the inactivation of Cronobacter sakazakii by high hydrostatic pressure

The effect of High Hydrostatic Pressure (HHP) on the survival of Cronobacter sakazakii was investigated. Deviations from linearity were found on the survival curves and the Mafart equation accurately described the kinetics of inactivation. Comparisons between strains and treatments were made based on the time needed for a 5-log10 reduction in viable count. The ability of C. sakazakii to tolerate high pressure was straindependent with a 26-fold difference in resistance among four strains tested. Pressure resistance was greatest in the stationary growth phase and at the highest growth temperatures tested (30 and 37 °C). Cells treated in neutral pH buffer were 5-fold more resistant than those treated at pH 4.0, and 8-fold more sensitive than those treated in buffer with sucrose added (aw=0.98). Pressure resistance data obtained in buffer at the appropriate pH adequately estimated the resistance of C. sakazakii in chicken and vegetables soups. In contrast, a significant protective effect against high pressure was conferred by rehydrated powdered milk. As expected, treatment efficacy improved as pressure increased. z values of 112, 136 and 156 MPa were obtained for pH 4.0, pH 7.0 and aw=0.98 buffers, respectively. Cells with sublethal injury to their outer and cytoplasmic membranes were detected after HHP under all the conditions tested. The lower resistance of C. sakazakii cells when treated in media of pH 4.0 seemed to be due to a decreased barostability of the bacterial envelopes. Conversely, the higher resistance displayed in media of reduced water activity may relate to a higher stability of bacterial envelopes.

Construção de modelos multivariados para determinação de lipídios totais e unidade em leite em pó comercial utilizando espectroscopia no infravermelho próximo

In this work calibration models were constructed to determine the content of total lipids and moisture in powdered milk samples. For this, used the near-infrared spectroscopy by diffuse reflectance, combined with multivariate calibration. Initially, the spectral data were submitted to correction of multiplicative light scattering (MSC) and Savitzsky-Golay smoothing. Then, the samples were divided into subgroups by application of hierarchical clustering analysis of the classes (HCA) and Ward Linkage criterion. Thus, it became possible to build regression models by partial least squares (PLS) that allowed the calibration and prediction of the content total lipid and moisture, based on the values obtained by the reference methods of Soxhlet and 105 ° C, respectively . Therefore, conclude that the NIR had a good performance for the quantification of samples of powdered milk, mainly by minimizing the analysis time, not destruction of the samples and not waste. Prediction models for determination of total lipids correlated (R) of 0.9955, RMSEP of 0.8952, therefore the average error between the Soxhlet and NIR was ± 0.70%, while the model prediction to content moisture correlated (R) of 0.9184, RMSEP, 0.3778 and error of ± 0.76%

Biodisponibilidade de ferro em diferentes compostos para leitões desmamados aos 21 dias de idade

Avaliou-se a biodisponibilidade de ferro de diferentes compostos visando sua utilização em dietas para leitões desmamados. Utilizaram-se 44 leitões (7 não-anêmicos e 37 anêmicos) desmamados aos 21 dias de idade (7,3 ± 1,8 kg) e distribuídos em dois grupos: grupo não-anêmico e grupo anêmico. Durante sete dias, os animais do grupo não-anêmico receberam dieta com FeSO4.7H2O (sulfato ferroso hepta-hidratado) na dose de 100 mg/kg e os do grupo anêmico, dieta sem ferro (<15 mg/kg ração). No sétimo dia, depois de determinada a concentração de hemoglobina sanguínea e diagnosticada a anemia, os leitões foram agrupados segundo o produto do peso (kg) × hemoglobina (g/dL) e alojados individualmente, durante 13 dias, em gaiolas para estudos de digestibilidade, onde foram alimentados com seis rações à base de milho e leite em pó: três rações-padrão com FeSO4.7H2O em quantidade equivalente a 80, 150 e 200 mg Fe/kg de ração; duas rações experimentais com ferro (150 mg/kg) na forma de FeSO4 microencapsulado com carboximetilcelulose ou de ferro quelado com metionina; e uma controle com ferro (100 mg/kg). O consumo de ração foi medido diariamente. Nos dias 0, 3, 6, 9 e 13 do período de repleção, os animais foram pesados para avaliação do desempenho e o sangue foi coletado para determinação da concentração de hemoglobina. Ao final do ensaio, os animais foram sacrificados e o fígado foi coletado para determinação das concentrações de ferro total, ferro heme e ferro não-heme. As concentrações hepáticas de ferro heme, ferro não-heme e ferro total não diferiram entre os animais, entretanto, os do grupo controle apresentaram excesso de ferro total no fígado, relacionado à dose de ferro injetada nos leitões após o desmame. em comparação ao FeSO4.7H2O não encapsulado, os compostos de ferro microencapsulado com carboximetilcelulose e de ferro quelado com metionina promovem melhor conversão alimentar em leitões desmamados.

Caracterização e processamento de leite bubalino em pó em secador por nebulização

Avaliou-se o processo de secagem por nebulização em "spray dryer" para a obtenção de leite bubalino em pó. Foram realizadas análises físico-químicas no leite in natura e no leite desidratado, para averiguar perdas de macronutrientes ocorridas durante a secagem; análises microbiológicas para assegurar a qualidade higiênico-sanitária do processo e produto e análises sensoriais para estabelecer a aceitabilidade do produto. Foram obtidas isotermas de adsorção e dessorção de umidade a 25°C, para o produto em pó, visando observar o seu comportamento higroscópico. O leite bubalino em pó obtido apresentou como características físicoquímicas: 3,4% de umidade, 23,2% de proteínas, 46,1% de gordura, 4,2% de cinzas, 0,5% de lecitina de soja e 22,6% de carboidratos totais. De acordo com os exames microbiológicos está apto para o consumo humano. O produto foi caracterizado como integral por não ter sofrido qualquer padronização. As perdas ocorridas para a maioria dos macronutrientes durante o processamento, foram inferiores a 5% e apenas o teor de proteínas apresentou variação superior a 15%, devido à desnaturação da caseína em temperatura superior a 80°C. O produto apresentou isotermas de adsorção do tipo III, mesmo comportamento apresentado pelo leite bovino. Através da isoterma de dessorção determinou-se o valor de umidade equivalente à monocamada, obtendo-se o valor médio de 4,4g H₂O/100g b.s., o que validou o processo utilizado. O comportamento de histerese apresentado pelo produto foi similar ao do leite em pó integral, sendo a sua aceitabilidade de 74%, muito próxima a 80% obtido para um leite em pó integral comercial.

Indução a espermiação e criopreservação espermática de Brycon cephalus (Gunther, 1869) (teleostei: characidae)

Pós-graduação em Ciência e Tecnologia Animal - FEIS

Infant milk formula manufacture: process and compositional interactions in high dry matter wet-mixes

Infant milk formula (IMF) is fortified milk with composition based on the nutrient content in human mother's milk, 0 to 6 months postpartum. Extensive medical and clinical research has led to advances in the nutritional quality of infant formula; however, relatively few studies have focused on interactions between nutrients and the manufacturing process. The objective of this research was to investigate the impact of composition and processing parameters on physical behaviour of high dry matter (DM) IMF systems with a view to designing more sustainable manufacturing processes. The study showed that commercial IMF, with similar compositions, manufactured by different processes, had markedly different physical properties in dehydrated or reconstituted state. Commercial products made with hydrolysed protein were more heat stable compared to products made with intact protein, however, emulsion quality was compromised. Heat-induced denaturation of whey proteins resulted in increased viscosity of wet-mixes, an effect that was dependant on both whey concentration and interactions with lactose and caseins. Expanding on fundamental laboratory studies, a novel high velocity steam injection process was developed whereby high DM (60%) wet-mixes with lower denaturation/viscosity compared to conventional processes could be achieved; powders produced using this process were of similar quality to those manufactured conventionally. Hydrolysed proteins were also shown to be an effective way of reducing viscosity in heat-treated high DM wet-mixes. In particular, using a whey protein concentrate whereby β-Lactoglobulin was selectively hydrolysed, i.e., α-Lactalbumin remained intact, reduced viscosity of wet-mixes during processing while still providing good emulsification. The thesis provides new insights into interactions between nutrients and/or processing which influence physical stability of IMF both in concentrated liquid and powdered form. The outcomes of the work have applications in such areas as; increasing the DM content of spray drier feeds in order to save energy, and, controlling final powder quality.

Analysis of fluoride concentration in mother's milk substitutes

The aim of the present study was to determine the fluoride concentration in some brands of mother's milk substitutes and evaluate the possibility of developing dental fluorosis by consuming these products. The products, all powdered, were divided into 3 groups: infant formulae (group I, n = 7), milk-based (group M, n = 8) and soy-based (group 8, n = 3). Samples from 3 cans of different batches of each brand were reconstituted in deionized water and analyzed using the specific electrode method, after hexamethyldisiloxane (HMDS) facilitated diffusion. The fluoride content (mg F/L) of the products ranged from 0.044 to 0.326 (I), 0.014 to 0.045 (M) and 0.253 to 0.702 (S). There was significant difference in the fluoride content of cans from distinct batches (p < 0.05) in most of the brands. The reconstitution of all products in water with optimal fluoride concentration for consumption during the mineralization phase of the primary teeth could result in daily fluoride intake above 0.07 mg F/kg body weight/day. Therefore, the consumption of these products, especially when reconstituted with optimally fluoridated water, could increase the risk of developing dental fluorosis.

Caking behaviour of spray-dried milk powders:using scanning probe microscopy to study nanoscale surface properties and material composition

Spray drying is widely used to manufacture many powdered products, with the drying process parameters having significant influence over the final powder's surface properties and propensity for unwanted caking. In most cases caking experiments are performed on bulk powders, but especially in multi-component powders, it is often difficult to interpret these results, where interaction effects between particles can be complex. Here the technique of scanning probe microscopy is used to characterize the nanoscale properties of spray dried model milk powders in order to investigate the surface properties of the powders.

MiLK: Transforming everyday places into dynamic learning spaces with mobile and web technologies

This paper explores how game authoring tools can teach processes that transform everyday places into engaging learning spaces. It discusses the motivation inherent in playing games and creating games for others, and how this stimulates an iterative process of creation and reflection and evokes a natural desire to engage in learning. The use of MiLK at the Adelaide Botanic Gardens is offered as a case in point. MiLK is an authoring tool that allows students and teachers to create and share SMS games for mobile phones. A group of South Australian high school students used MiLK to play a game, create their own games and play each other’s games during a day at the gardens. This paper details the learning processes involved in these activities and how the students, without prompting, reflected on their learning, conducted peer assessment, and engaged in a two-way discussion with their teacher about new technologies and their implications for learning. The paper concludes with a discussion of the needs and requirements of 21st century learners and how MiLK can support constructivist and connectivist teaching methods that engage learners and will produce an appropriately skilled future workforce.