Binding properties of peptidic affinity ligands for plasmid DNA capture and detection

Peptides constructed from α-helical subunits of the Lac repressor protein (LacI) were designed then tailored to achieve particular binding kinetics and dissociation constants for plasmid DNA purification and detection. Surface plasmon resonance was employed for quantification and characterization of the binding of double stranded Escherichia coli plasmid DNA (pUC19) via the lac operon (lacO) to "biomimics" of the DNA binding domain of LacI. Equilibrium dissociation constants (K D), association (k a), and dissociation rates (k d) for the interaction between a suite of peptide sequences and pUC19 were determined. K D values measured for the binding of pUC19 to the 47mer, 27mer, 16mer, and 14mer peptides were 8.8 ± 1.3 × 10 -10 M, 7.2 ± 0.6 × 10 -10 M, 4.5 ± 0.5 × 10 -8 M, and 6.2 ± 0.9 × 10 -6 M, respectively. These findings show that affinity peptides, composed of subunits from a naturally occurring operon-repressor interaction, can be designed to achieve binding characteristics suitable for affinity chromatography and biosensor devices.

Rapid production of a plasmid DNA encoding a malaria vaccine candidate via amino-functionalized poly(GMA-co-EDMA) monolith

Malaria is a global health problem; an effective vaccine is urgently needed. Due to the relative poverty and lack of infrastructure in malaria endemic areas, DNA-based vaccines that are stable at ambient temperatures and easy to formulate have great potential. While attention has been focused mainly on antigen selection, vector design and efficacy assessment, the development of a rapid and commercially viable process to manufacture DNA is generally overlooked. We report here a continuous purification technique employing an optimized stationary adsorbent to allow high-vaccine recovery, low-processing time, and, hence, high-productivity. A 40.0 mL monolithic stationary phase was synthesized and functionalized with amino groups from 2-Chloro-N,N- diethylethylamine hydrochloride for anion-exchange isolation of a plasmid DNA (pDNA) that encodes a malaria vaccine candidate, VR1020-PyMSP4/5. Physical characterization of the monolithic polymer showed a macroporous material with a modal pore diameter of 750 nm. The final vaccine product isolated after 3 min elution was homogeneous supercoiled plasmid with gDNA, RNA and protein levels in keeping with clinical regulatory standards. Toxicological studies of the pVR1020-PyMSP4/5 showed a minimum endotoxin level of 0.28 EU/m.g pDNA. This cost-effective technique is cGMP compatible and highly scalable for the production of DNA-based vaccines in commercial quantities, when such vaccines prove to be effective against malaria. © 2008 American Institute of Chemical Engineers.

Binding mechanism of affinity ligands for purification of plasmid DNA

Plasmid DNA for therapeutic and vaccination purposes must be highly purified. The high selectivity of affinity chromatography makes it ideal for the isolation of pDNA from complex biological feed stocks. Affinity chromatography makes use of the biological function and/or individual chemical structure of the interacting molecules. However, the success of any affinity purification protocol is dependent on the availability of suitable ligands. In this study, surface plasmon resonance (SPR) based Biacore system has been employed for the detection and quantification of the binding between lac operon (lacO) sequence contained in a pDNA and synthetic peptides based on the DNA-binding domain of the lac repressor protein, lad. The equilibrium dissociation constant (K D) and association and dissociation rate constants (ka, kd) for the interaction between plasmid DNA and designed peptides were determined.

Virulence genes and plasmid profiles in Rhodococcus equi isolates from domestic pigs and wild boars (Sus scrofa) in Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Genetic studies on the role of type IA DNA topoisomerases in DNA metabolism and genome maintenance in Escherichia coli

Le surenroulement de l’ADN est important pour tous les processus cellulaires qui requièrent la séparation des brins de l’ADN. Il est régulé par l’activité enzymatique des topoisomérases. La gyrase (gyrA et gyrB) utilise l’ATP pour introduire des supertours négatifs dans l’ADN, alors que la topoisomérase I (topA) et la topoisomérase IV (parC et parE) les éliminent. Les cellules déficientes pour la topoisomérase I sont viables si elles ont des mutations compensatoires dans un des gènes codant pour une sous-unité de la gyrase. Ces mutations réduisent le niveau de surenroulement négatif du chromosome et permettent la croissance bactérienne. Une de ces mutations engendre la production d'une gyrase thermosensible. L’activité de surenroulement de la gyrase en absence de la topoisomérase I cause l’accumulation d’ADN hyper-surenroulé négativement à cause de la formation de R-loops. La surproduction de la RNase HI (rnhA), une enzyme qui dégrade l’ARN des R-loops, permet de prévenir l’accumulation d’un excès de surenroulement négatif. En absence de RNase HI, des R-loops sont aussi formés et peuvent être utilisés pour déclencher la réplication de l’ADN indépendamment du système normal oriC/DnaA, un phénomène connu sous le nom de « constitutive stable DNA replication » (cSDR). Pour mieux comprendre le lien entre la formation de R-loops et l’excès de surenroulement négatif, nous avons construit un mutant conditionnel topA rnhA gyrB(Ts) avec l’expression inductible de la RNase HI à partir d’un plasmide. Nous avons trouvé que l’ADN des cellules de ce mutant était excessivement relâché au lieu d'être hypersurenroulé négativement en conditions de pénurie de RNase HI. La relaxation de l’ADN a été montrée comme étant indépendante de l'activité de la topoisomérase IV. Les cellules du triple mutant topA rnhA gyrB(Ts) forment de très longs filaments remplis d’ADN, montrant ainsi un défaut de ségrégation des chromosomes. La surproduction de la topoisomérase III (topB), une enzyme qui peut effectuer la décaténation de l’ADN, a corrigé les problèmes de ségrégation sans toutefois restaurer le niveau de surenroulement de l’ADN. Nous avons constaté que des extraits protéiques du mutant topA rnhA gyrB(Ts) pouvaient inhiber l’activité de surenroulement négatif de la gyrase dans des extraits d’une souche sauvage, suggérant ainsi que la pénurie de RNase HI avait déclenché une réponse cellulaire d’inhibition de cette activité de la gyrase. De plus, des expériences in vivo et in vitro ont montré qu’en absence de RNase HI, l’activité ATP-dépendante de surenroulement négatif de la gyrase était inhibée, alors que l’activité ATP-indépendante de cette enzyme demeurait intacte. Des suppresseurs extragéniques du défaut de croissance du triple mutant topA rnhA gyrB(Ts) qui corrigent également les problèmes de surenroulement et de ségrégation des chromosomes ont pour la plupart été cartographiés dans des gènes impliqués dans la réplication de l’ADN, le métabolisme des R-loops, ou la formation de fimbriae. La deuxième partie de ce projet avait pour but de comprendre les rôles des topoisomérases de type IA (topoisomérase I et topoisomérase III) dans la ségrégation et la stabilité du génome de Escherichia coli. Pour étudier ces rôles, nous avons utilisé des approches de génétique combinées avec la cytométrie en flux, l’analyse de type Western blot et la microscopie. Nous avons constaté que le phénotype Par- et les défauts de ségrégation des chromosomes d’un mutant gyrB(Ts) avaient été corrigés en inactivant topA, mais uniquement en présence du gène topB. En outre, nous avons démontré que la surproduction de la topoisomérase III pouvait corriger le phénotype Par- du mutant gyrB(Ts) sans toutefois corriger les défauts de croissance de ce dernier. La surproduction de topoisomérase IV, enzyme responsable de la décaténation des chromosomes chez E. coli, ne pouvait pas remplacer la topoisomérase III. Nos résultats suggèrent que les topoisomérases de type IA jouent un rôle important dans la ségrégation des chromosomes lorsque la gyrase est inefficace. Pour étudier le rôle des topoisomérases de type IA dans la stabilité du génome, la troisième partie du projet, nous avons utilisé des approches génétiques combinées avec des tests de « spot » et la microscopie. Nous avons constaté que les cellules déficientes en topoisomérase I avaient des défauts de ségrégation de chromosomes et de croissance liés à un excès de surenroulement négatif, et que ces défauts pouvaient être corrigés en inactivant recQ, recA ou par la surproduction de la topoisomérase III. Le suppresseur extragénique oriC15::aph isolé dans la première partie du projet pouvait également corriger ces problèmes. Les cellules déficientes en topoisomérases de type IA formaient des très longs filaments remplis d’ADN d’apparence diffuse et réparti inégalement dans la cellule. Ces phénotypes pouvaient être partiellement corrigés par la surproduction de la RNase HI ou en inactivant recA, ou encore par des suppresseurs isolés dans la première partie du projet et impliques dans le cSDR (dnaT18::aph et rne59::aph). Donc, dans E. coli, les topoisomérases de type IA jouent un rôle dans la stabilité du génome en inhibant la réplication inappropriée à partir de oriC et de R-loops, et en empêchant les défauts de ségrégation liés à la recombinaison RecA-dépendante, par leur action avec RecQ. Les travaux rapportés ici révèlent que la réplication inappropriée et dérégulée est une source majeure de l’instabilité génomique. Empêcher la réplication inappropriée permet la ségrégation des chromosomes et le maintien d’un génome stable. La RNase HI et les topoisomérases de type IA jouent un rôle majeur dans la prévention de la réplication inappropriée. La RNase HI réalise cette tâche en modulant l’activité de surenroulement ATP-dependante de la gyrase, et en empêchant la réplication à partir des R-loops. Les topoisomérases de type IA assurent le maintien de la stabilité du génome en empêchant la réplication inappropriée à partir de oriC et des R-loops et en agissant avec RecQ pour résoudre des intermédiaires de recombinaison RecA-dépendants afin de permettre la ségrégation des chromosomes.

DNA immunization: Induction of higher avidity antibody and effect of route on T cell cytotoxicity

Immunizations of mice with plasmid DNAs encoding ovalbumin (OVA), human Ig, and hen egg lysozyme were compared with doses of soluble protein (without adjuvant) that induced similar IgG responses. The route of immunization influenced the magnitude of the antibody (Ab) response in that intradermal (i.d.) injection elicited higher IgG Ab levels than i.m. injection in both DNA- and protein-immunized mice. Although total IgG levels were similar to soluble protein controls, the avidity of the anti-OVA Abs generated by DNA immunization were 100- and 1,000-fold higher via the i.m. or i.d. route, respectively. However, despite the generation of high-avidity Ab in DNA-immunized mice, germinal centers could not be detected in either DNA- or protein-immunized mice. Examination of the IgG subclass response showed that IgG2a was induced by i.m. DNA immunization, coinciding with elevated interferon γ production, whereas a dominant and elevated IgG1 response, coinciding with detectable interleukin 4 production, was generated after i.d. immunization with DNA or soluble OVA and hen egg lysozyme but not human Ig protein. As expected, cytotoxic T cell (CTL) responses could be detected only after DNA immunization. I.d. immunization produced the strongest CTL responses early (2 weeks) but was similar to i.m. later. Therefore, DNA immunization can differ from protein immunization by its ability to induce rapid CTL responses and higher avidity Ab, both of which are advantageous for vaccination.

Marker gene elimination from transgenic barley, using co-transformation with adjacent 'twin T-DNAs' on a standard Agrobacterium transformation vector

We have tested a methodology for the elimination of the selectable marker gene after Agrobacterium-mediated transformation of barley. This involves segregation of the selectable marker gene away from the gene of interest following co-transformation using a plasmid carrying two T-DNAs, which were located adjacent to each other with no intervening region. A standard binary transformation vector was modified by insertion of a small section composed of an additional left and right T-DNA border, so that the selectable marker gene and the site for insertion of the gene of interest (GOI) were each flanked by a left and right border. Using this vector three different GOIs were transformed into barley. Analysis of transgene inheritance was facilitated by a novel and rapid assay utilizing PCR amplification from macerated leaf tissue. Co-insertion was observed in two thirds of transformants, and among these approximately one quarter had transgene inserts which segregated in the next generation to yield selectable marker-free transgenic plants. Insertion of non-T-DNA plasmid sequences was observed in only one of fourteen SMF lines tested. This technique thus provides a workable system for generating transgenic barley free from selectable marker genes, thereby obviating public concerns regarding proliferation of these genes.

The porcine circovirus type 1 capsid gene promoter improves antigen expression and immunogenicity in a HIV-1 plasmid vaccine

Background. One of the promising avenues for development of vaccines against Human immunodeficiency virus type 1 (HIV-1) and other human pathogens is the use of plasmid-based DNA vaccines. However, relatively large doses of plasmid must be injected for a relatively weak response. We investigated whether genome elements from Porcine circovirus type 1 (PCV-1), an apathogenic small ssDNA-containing virus, had useful expression-enhancing properties that could allow dose-sparing in a plasmid vaccine. Results. The linearised PCV-1 genome inserted 5' of the CMV promoter in the well-characterised HIV-1 plasmid vaccine pTHgrttnC increased expression of the polyantigen up to 2-fold, and elicited 3-fold higher CTL responses in mice at 10-fold lower doses than unmodified pTHgrttnC. The PCV-1 capsid gene promoter (Pcap) alone was equally effective. Enhancing activity was traced to a putative composite host transcription factor binding site and a "Conserved Late Element" transcription-enhancing sequence previously unidentified in circoviruses. Conclusions. We identified a novel PCV-1 genome-derived enhancer sequence that significantly increased antigen expression from plasmids in in vitro assays, and improved immunogenicity in mice of the HIV-1 subtype C vaccine plasmid, pTHgrttnC. This should allow significant dose sparing of, or increased responses to, this and other plasmid-based vaccines. We also report investigations of the potential of other circovirus-derived sequences to be similarly used. © 2011 Tanzer et al; licensee BioMed Central Ltd.

Nucleotide sequence of coat protein gene for GPV isolate of barley yellow dwarf virus and construction of expression plasmid for plant

GPV is a Chinese serotype isolate of barley yellow dwarf virus (BYDV) that has no reaction with antiserum of MAV, PAV, SGV, RPV and RMV The sequence of the coat protein (CP) of GPV isolate of BYDV was identified and its amino acid sequence was deduced. The coding region for the putative GPV CP is 603 bases nucleotides and encodes a Mr 22 218 (22 ku) protein. The same as MAV, PAV and RPV, GPV contained a second ORF within the coat protein coding region. This protein of 17 024 Mr (17 ku) is thought to correspond to the Virion protein genome linked (Vpg). Sequence comparisons of the CP coding region between the GPV isolate of BYDV and other isolates of BYDV have been done. The nucleotide and amino acid sequence homology of GPV has a greater identity to the sequence of RPV than those of PAV and MAV. The GPV CP sequence stored 83.7% of nucleotide similarity and 77.5% of deduced amino acid similarity, whereas that of the PAV and MAV shared 56.9%, 53.2% and 44.1%, 43.8% respectively. According to BYDV-GPV CP sequence, two primers were designed. The cDNA of CP was produced by RT-PCR. Full-length cDNA of CP was inserted into plasmid to construct expression plasmids named pPPI1, pPPI2 and pPPI5 based on different promoters. The recombinant plasmids were identified by using α-32P-dATP labelled CP probe, α-32P-ATP labelled GPV RNA probe and sequencing to confirm real GPV CP gene cDNA in plasmids.

A new plasmid display technology for the in vitro selection of functional phenotype–genotype linked proteins

Background: Display technologies which allow peptides or proteins to be physically associated with the encoding DNA are central to procedures which involve screening of protein libraries in vitro for new or altered function. Here we describe a new system designed specifically for the display of libraries of diverse, functional proteins which utilises the DNA binding protein nuclear factor κB (NF-κB) p50 to establish a phenotype–genotype link between the displayed protein and the encoding gene. Results: A range of model fusion proteins to either the amino- or carboxy-terminus of NF-κB p50 have been constructed and shown to retain the picomolar affinity and DNA specificity of wild-type NF-κB p50. Through use of an optimal combination of binding buffer and DNA target sequence, the half-life of p50–DNA complexes could be increased to over 47 h, enabling the competitive selection of a variety of protein–plasmid complexes with enrichment factors of up to 6000-fold per round. The p50-based plasmid display system was used to enrich a maltose binding protein complex to homogeneity in only three rounds from a binary mixture with a starting ratio of 1:108 and to enrich to near homogeneity a single functional protein from a phenotype–genotype linked Escherichia coli genomic library using in vitro functional selections. Conclusions: A new display technology is described which addresses the challenge of functional protein display. The results demonstrate that plasmid display is sufficiently sensitive to select a functional protein from large libraries and that it therefore represents a useful addition to the repertoire of display technologies.

A new plasmid display technology for the in vitro selection of functional phenotype-genotype linked proteins

Background Display technologies which allow peptides or proteins to be physically associated with the encoding DNA are central to procedures which involve screening of protein libraries in vitro for new or altered function. Here we describe a new system designed specifically for the display of libraries of diverse, functional proteins which utilises the DNA binding protein nuclear factor κB (NF-κB) p50 to establish a phenotype-genotype link between the displayed protein and the encoding gene. Results A range of model fusion proteins to either the amino- or carboxy-terminus of NF-κB p50 have been constructed and shown to retain the picomolar affinity and DNA specificity of wild-type NF-κB p50. Through use of an optimal combination of binding buffer and DNA target sequence, the half-life of p50-DNA complexes could be increased to over 47 h, enabling the competitive selection of a variety of protein-plasmid complexes with enrichment factors of up to 6000-fold per round. The p50-based plasmid display system was used to enrich a maltose binding protein complex to homogeneity in only three rounds from a binary mixture with a starting ratio of 1:108 and to enrich to near homogeneity a single functional protein from a phenotype-genotype linked Escherichia coli genomic library using in vitro functional selections. Conclusions A new display technology is described which addresses the challenge of functional protein display. The results demonstrate that plasmid display is sufficiently sensitive to select a functional protein from large libraries and that it therefore represents a useful addition to the repertoire of display technologies.

The harnessing of peptide-monolith constructs for single step plasmid DNA purification

The availability of synthetic peptides has paved the way for their use in tailor-made interactions with biomolecules. In this study, a 16mer LacI-based peptide was used as an affinity ligand to examine the scale up feasibility for plasmid DNA purification. First, the peptide was designed and characterized for the affinity purification of lacO containing plasmid DNA, to be employed as a high affinity ligand for the potential capturing of plasmid DNA in a single unit operation. It was found there were no discernible interactions with a control plasmid that did not encode the lacO nucleotide sequence. The dissociation equilibrium constant of the binding between the 16mer peptide and target pUC19 was 5.0 ± 0.5 × 10-8 M as assessed by surface plasmon resonance. This selectivity and moderated affinity indicate that the 16mer is suitable for the adsorption and chromatographic purification of plasmid DNA. The suitability of this peptide was then evaluated using a chromatography system with the 16mer peptide immobilized to a customized monolith to purify plasmid DNA, obtaining preferential purification of supercoiled pUC19. The results demonstrate the applicability of peptide-monolith supports to scale up the purification process for plasmid DNA using designed ligands via a biomimetic approach.

Process considerations related to the microencapsulation of plasmid DNA via ultrasonic atomization

An effective means of facilitating DNA vaccine delivery to antigen presenting cells is through biodegradable microspheres. Microspheres offer distinct advantages over other delivery technologies by providing release of DNA vaccine in its bioactive form in a controlled fashion. In this study, biodegradable poly(D,L-lactide-coglycolide) (PLGA) microspheres containing polyethylenimine (PEI) condensed plasmid DNA (pDNA) were prepared using a 40 kHz ultrasonic atomization system. Process synthesis parameters, which are important to the scale-up of microspheres that are suitable for nasal delivery (i.e., less than 20 μm), were studied. These parameters include polymer concentration; feed flowrate; volumetric ratio of polymer and pDNA-PEI (plasmid DNA-polyethylenimine) complexes; and nitrogen to phosphorous (N/P) ratio. PDNA encapsulation efficiencies were predominantly in the range 82-96%, and the mean sizes of the particle were between 6 and 15 μm. The ultrasonic synthesis method was shown to have excellent reproducibility. PEI affected morphology of the microspheres, as it induced the formation of porous particles that accelerate the release rate of pDNA. The PLGA microspheres displayed an in vitro release of pDNA of 95-99% within 30 days and demonstrated zero order release kinetics without an initial spike of pDNA. Agarose electrophoresis confirmed conservation of the supercoiled form of pDNA throughout the synthesis and in vitro release stages. It was concluded that ultrasonic atomization is an efficient technique to overcome the key obstacles in scaling-up the manufacture of encapsulated vaccine for clinical trials and ultimately, commercial applications.