996 resultados para Petróleo - Geologia
Resumo:
Petroleum exists in the nature in certain underground formations where it is adsorbed into the rocks pores. For the conventional recovery methods usually only 30% of the oil is extracted and this can be credited, basically, to three aspects: high viscosity of the oil, geology of the formation and high interfacial tensions between the reservoir s fluids. The enhanced recovery methods use the injection of a fluid or fluids mixture in a reservoir to act in points where the conventional process didn't reach the recovery rates. Microemulsion flooding, considered an enhanced method, has the purpose to desorb the oil from the rock formation and to attain an efficient displacement of the oil emulsion. With this in mind, this work was accomplished with two main objectives: the study of the parameters effect that influence a microemulsified system (surfactant and cosurfactant types, C/S rate and salinity) and the evaluation of displacement efficiency with the microemulsions that showed stability in the rich aqueous area. For the analyzed parameters it was chose the microemulsions composition used in the recovery stage: 25% water, 5% kerosene, 46.7% of butanol as cosurfactant and 23.3% of BC or SCO cosurfactant. The core plugs of Assu and Botucatu sandstones were appraised in porosity and permeability tests and then submitted to the steps of saturation with seawater and oil, conventional recovery with water and enhanced recovery with the selected microemulsions. The Botucatu sandstone presented better recovery parameters, and the microemulsion composed with BS surfactant had larger recovery efficiency (26.88%)
Resumo:
The Lagoa Feia Group (Early Cretaceous) is widely distributed around the Campos Basin, forming deep prospects in the basin. It has two large coquinas platforms shellfish, and the lower deck constituent important reservoir in the southwestern of this basin, a producer of oil in the trend-Badejo-Linguado-Pampo. Due to the rising national energy demand is necessary to see the incorporation of technical knowledge and training of human resources in the knowledge of petroleum reservoirs. In this sense, the Pampo Field, as well as other fields of the trend, fall as interesting target area for study. Accumulations of hydrocarbons are partitioning structural - stratigraphic only for the three fields. They are mixed origin of traps, with influence of structural, stratigraphic and diagenetic. With the development of catchment areas of the latter condition has manifested itself in such a way to verify parts with nonproducing wells, which are observed in the intervals coquinas are closed, with reduced thickness and / or low quality porous. The understanding of these accumulations, by testing structural, stratigraphic and reservoir and the use of geological and geophysical techniques, will bring a better understanding of the portions relating to economic accumulation or subeconomic development of hydrocarbons in this region, contributing to the scientific knowledge of the Pampo Field.
Resumo:
A análise da matriz energética mundial, assim como a brasileira, nos mostra que o gás natural representará em breve um importante insumo energético favorecendo a balança de pagamentos nacional, visto que o gás poderá ser usado tanto para consumo interno, quanto para exportação. O aumento das reservas nacionais de hidrocarbonetos se deve ao desenvolvimento de tecnologias, que favoreceram o conhecimento das bacias brasileiras quanto ao seu potencial produtor de combustíveis fósseis, permitindo a descoberta de novas jazidas. O amadurecimento do mercado nacional quanto ao consumo de gás natural passa pela construção de uma infraestrutura robusta, eficiente e que possibilite a captação, o armazenamento e distribuição do mesmo. O Brasil tem todos os requisitos necessários para adentrar ao seleto grupo de países exportadores de hidrocarbonetos, a descoberta do Pré-sal tende a incrementar a importância do gás natural para o país. Ao final do trabalho são descritos cenários futuros (quanto o consumo de energéticos), onde se vê que o consumo de energia para os próximos anos crescerá a taxas superiores as das duas últimas décadas. Análise destes cenários permite antecipar o interesse de futuros investimentos no desenvolvimento do conhecimento geológico para áreas promissoras.
Resumo:
Este trabalho tem como objetivo estudar a indústria do petróleo, gás natural e biocombustíveis no contexto brasileiro e no mundial. Visa também analisar as vantagens e desvantagens dos biocombustíveis e seu possível impacto na indústria do petróleo, assim como os principais indicativos e projeções da indústria do petróleo, como reserva, produção, preço e consumo, através de coleta de dados e geração de gráficos pesquisados e comparados de grandes agências e empresas de energia. Os biocombustíveis podem ser um grande aliado da indústria do petróleo tendo em vista a duração das reservas mundiais de hidrocarbonetos. O uso dos biocombustíveis implicará no desenvolvimento de tecnologias renováveis e de reutilização de materiais antes descartados, trazendo benefício a toda sociedade. A indústria do petróleo é impactada pelas flutuações no mercado internacional e pela demanda, assim como pela manipulação da produção de combustíveis fósseis pelos países produtores. Esses aspectos apresentados interligados criam uma complexa indústria que a presente dissertação se propõe a analisar.
Resumo:
Os métodos tradicionais de estimular a produção de petróleo, envolvendo a injeção de água, vapor, gás ou outros produtos, estabeleceram a base conceitual para novos métodos de extração de óleo, utilizando micro-organismos e processos biológicos. As tecnologias que empregam os processos de bioestimulação e bioaumentação já são amplamente utilizadas em inúmeras aplicações industriais, farmacêuticas e agroindustriais, e mais recentemente, na indústria do petróleo. Dada a enorme dimensão econômica da indústria do petróleo, qualquer tecnologia que possa aumentar a produção ou o fator de recuperação de um campo petrolífero gera a expectativa de grandes benefícios técnicos, econômicos e estratégicos. Buscando avaliar o possível impacto de MEOR (microbial enhanced oil recovery) no fator de recuperação das reservas de óleo e gás no Brasil, e quais técnicas poderiam ser mais indicadas, foi feito um amplo estudo dessas técnicas e de diversos aspectos da geologia no Brasil. Também foram realizados estudos preliminares de uma técnica de MEOR (bioacidificação) com possível aplicabilidade em reservatórios brasileiros. Os resultados demonstram que as técnicas de MEOR podem ser eficazes na produção, solubilização, emulsificação ou transformação de diversos compostos, e que podem promover outros efeitos físicos no óleo ou na matriz da rocha reservatório. Também foram identificadas bacias petrolíferas brasileiras e recursos não convencionais com maior potencial para utilização de determinadas técnicas de MEOR. Finalmente, foram identificadas algumas técnicas de MEOR que merecem maiores estudos, entre as técnicas mais consolidadas (como a produção de biossurfatantes e biopolímeros, e o controle da biocorrosão), e as que ainda não foram completamente viabilizadas (como a gaseificação de carvão, óleo e matéria orgânica; a dissociação microbiana de hidratos de gás; a bioconversão de CO2 em metano; e a bioacidificação). Apesar de seu potencial ainda não ser amplamente reconhecido, as técnicas de MEOR representam o limiar de uma nova era na estimulação da produção de recursos petrolíferos existentes, e até mesmo para os planos de desenvolvimento de novas áreas petrolíferas e recursos energéticos. Este trabalho fornece o embasamento técnico para sugerir novas iniciativas, reconhecer o potencial estratégico de MEOR, e para ajudar a realizar seu pleno potencial e seus benefícios.
Resumo:
O presente estudo baseou-se na análise do conteúdo orgânico de 173 amostras da Formação Pojuca, provenientes dos furos de sondagem 9-FBA-65-BA e 9-FBA-79-BA perfurados na Bacia do Recôncavo. Neste trabalho procedeu-se a um estudo integrando, resultados palinológicos, palinofaciológicos e de geoquímica orgânica com base nos dados de teores de Carbono Orgânico Total (COT) e de pirólise Rock-Eval. A associação palinoflorística identificada indica um paleoambiente dominantemente continental, composto por um sistema fluvial deltaico-lacustre, sob um clima quente e árido. Tal associação enquadra-se àquelas observadas nas bacias do Nordeste brasileiro e insere-se nas características das associações pertencentes à Província Microflorística Dicheiropollis (ex WASA). Foram identificadas 55 espécies de palinomorfos, incluindo grãos de pólen e esporos. A identificação das espécies, Dicheiropollis etruscus e Vitreisporites pallidus permitiu posicionar o intervalo analisado na Biozona Vitreisporites pallidus, considerada como de idade Aratu. Por meio de observação em microscopia óptica com luz branca transmitida e luz ultravioleta; e le-BA, caracterizando um conteúdo orgânico na janela de geração de hidrocarbonetos. Com base nos resultados de pirólise Rock-Eval, verificou-se que a Formação Pojuca, na área, é constituída vando-se em conta os tipos e o grau de preservação da matéria orgânica, foi possível individualizar três palinofácies distintas. As análises quantitativas do conteúdo orgânico mostram uma mistura de material orgânico de origem alóctone, representado por grãos de pólen, esporos e fitoclastos e autóctone dominada por material orgânico amorfo. As mais altas fluorescências são observadas nas Palinofácies 1 e 2, indicando um ambiente mais reduto r à época de sedimentação, destes estratos. Os dados de ICE apresentam valores de maturação de 5 para os sedimentos atravessados pelo poço 9-FBA-65-BA e 6,5-7 para o poço 9-FBA-79 na sua quase totalidade por matéria orgânica do tipo II, rica em hidrogênio e pobre em oxigênio, correspondendo ao um tipo de matéria orgânica propícia à geração de hidrocarbonetos líquidos e gasosos. Os níveis 3 e 4, localizados nas Palinofácies 1 e 2 do poço 9-FBA-79-BA apresentam valores de COT superiores a 1,5%, e considerando os dados de pirólise Rock-Eval, nota-se que estes intervalos são os que oferecem um maior potencial gerador, já que os valores de S2 excedem a 5,0 mg HC/g de rocha, além de valores de IH superiores a 200 e atingindo 600.
Resumo:
In recent years, the DFA introduced by Peng, was established as an important tool capable of detecting long-range autocorrelation in time series with non-stationary. This technique has been successfully applied to various areas such as: Econophysics, Biophysics, Medicine, Physics and Climatology. In this study, we used the DFA technique to obtain the Hurst exponent (H) of the profile of electric density profile (RHOB) of 53 wells resulting from the Field School of Namorados. In this work we want to know if we can or not use H to spatially characterize the spatial data field. Two cases arise: In the first a set of H reflects the local geology, with wells that are geographically closer showing similar H, and then one can use H in geostatistical procedures. In the second case each well has its proper H and the information of the well are uncorrelated, the profiles show only random fluctuations in H that do not show any spatial structure. Cluster analysis is a method widely used in carrying out statistical analysis. In this work we use the non-hierarchy method of k-means. In order to verify whether a set of data generated by the k-means method shows spatial patterns, we create the parameter Ω (index of neighborhood). High Ω shows more aggregated data, low Ω indicates dispersed or data without spatial correlation. With help of this index and the method of Monte Carlo. Using Ω index we verify that random cluster data shows a distribution of Ω that is lower than actual cluster Ω. Thus we conclude that the data of H obtained in 53 wells are grouped and can be used to characterize space patterns. The analysis of curves level confirmed the results of the k-means
Resumo:
With the high oil price variability, the petroleum and the reservoir engineers are usually face to face on how they can evaluate the well performance and productivity. They can improve high productivity from the well construction to the secondary recoveries, but they have never tried a measurement in the drilling operations about the lower productivity index. As a rule, frequently the drilling operations hear from the reservoir engineering and geology that, if there is a formation damage, probably some drilling operations practices were not done properly or the good practice in petroleum engineering or mud engineering were not observed. The study in this working search is an attempt of how to measure a formation damage just from the project drilling to the drilling operations, with datum from the fields in Brazilian northeast and putting into practice a Simulator developed from the modeling on the theory offered by different experts and sources in formation damage
Resumo:
This thesis deals with the sedimentological/stratigraphic and structural evolution of the sedimentary rocks that occur in the NW continental border of the Potiguar Basin. These rocks are well exposed along coastal cliffs between the localities of Lagoa do Mato and Icapuí, Ceará State (NE Brazil). The sedimentological/stratigraphic study involved, at the outcrop scale, detailed facies descriptions, profile mapping of the vertical succession of different beds, and columnar sections displaying inferred lateral relationships. The approach was complemented by granulometric and petrographic analyses, including the characterization of heavy mineral assemblages. The data set allowed to recognize two kinds of lithological units, a carbonate one of very restricted occurrence at the base of the cliffs, and three younger, distinct siliciclastic units, that predominate along the cliffs, in vertical and lateral extent. The carbonate rocks were correlated to the late Cretaceous Jandaíra Formation, which is covered by the siliciclastic Barreiras Formation. The Barreiras Formation occurs in two distinct structural settings, the usual one with nondeformed, subhorizontal strata, or as tilted beds, affected by strong deformation. Two lithofacies were recognized, vertically arranged or in fault contacts. The lower facies is characterized by silty-argillaceous sandstones with low-angle cross bedding; the upper facies comprises medium to coarse grained sandstones, with conglomeratic layers. The Tibau Formation (medium to coarse-grained sandstones with argillite intercalations) occurs at the NW side of the studied area, laterally interlayered with the Barreiras Formation. Eolic sediments correlated to the Potengi Formation overly the former units, either displaying an angular unconformity, or simply an erosional contact (stratigraphic unconformity). Outstanding structural features, identified in the Barreiras Formation, led to characterize a neocenozoic stress field, which generated faults and folds and/or reactivated older structures in the subjacent late cretaceous (to paleogene, in the offshore basin) section. The structures recognized in the Barreiras Formation comprise two distinct assemblages, namely a main extensional deformation between the localities of Ponta Grossa and Redonda, and a contractional style (succeeded by oblique extensional structures) at Vila Nova. In the first case, the structural assemblage is dominated by N-S (N±20°Az) steep to gently-dipping extensional faults, displaying a domino-style or listric geometry with associated roll-over structures. This deformation pattern is explained by an E-W/WNW extension, contemporaneous with deposition of the upper facies of the Barreiras Formation, during the time interval Miocene to Pleistocene. Strong rotation of blocks and faults generated low-angle distensional faults and, locally, subvertical bedding, allowing to estimate very high strain states, with extension estimates varying between 40% up to 200%. Numerous detachment zones, parallel to bedding, help to acommodate this intense deformation. The detachment surfaces and a large number of faults display mesoscopic features analoguous to the ones of ductile shear zones, with development of S-C fabrics, shear bands, sigmoidal clasts and others, pointing to a hydroplastic deformation regime in these cases. Local occurrences of the Jandaíra limestone are controled by extensional faults that exhume the pre-Barreiras section, including an earlier event with N-S extension. Finally, WNWtrending extensional shear zones and faults are compatible with the Holocene stress field along the present continental margin. In the Vila Nova region, close to Icapuí, gentle normal folds with fold hinges shallowly pluging to SSW affect the lower facies of the Barreiras Formation, displaying an incipient dissolution cleavage associated with an extension lineation at high rake (a S>L fabric). Deposition of the upper facies siliciclastics is controlled by pull-apart graben structures, bordered by N-NE-trending sinistral-normal shear zones and faults, characterizing an structural inversion. Microstructures are compatible with tectonic deformation of the sedimentary pile, burried at shallow depths. The observed features point to high pore fluid pressures during deformation of the sediments, producing hydroplastic structures through mechanisms of granular flow. Such structures are overprinted by microfractures and microfaults (an essentially brittle regime), tracking the change to microfracturing and frictional shear mechanisms accompanying progressive dewatering and sediment lithification. Correlation of the structures observed at the surface with those present at depth was tested through geophysical data (Ground Penetrating Radar, seismics and a magnetic map). EW and NE-trending lineaments are observed in the magnetic map. The seismic sections display several examples of positive flower structures which affect the base of the cretaceous sediments; at higher stratigraphic levels, normal components/slips are compatible with the negative structural inversion characterized at the surface. Such correlations assisted in proposing a structural model compatible with the regional tectonic framework. The strong neogenepleistocene deformation is necessarily propagated in the subsurface, affecting the late cretaceous section (Açu and Jandaíra formations), wich host the hydrocarbon reservoirs in this portion of the Potiguar Basin. The proposed structural model is related to the dextral transcurrent/transform deformation along the Equatorial Margin, associated with transpressive terminations of E-W fault zones, or at their intersections with NE-trending lineaments, such as the Ponta Grossa-Fazenda Belém one (the LPGFB, itself controlled by a Brasiliano-age strike-slip shear zone). In a first step (and possibly during the late Cretaceous to Paleogene), this lineament was activated under a sinistral transpressional regime (antithetic to the main dextral deformation in the E-W zones), giving way to the folds in the lower facies of the Barreiras Formation, as well as the positive flower structures mapped through the seismic sections, at depth. This stage was succeeded (or was penecontemporaneous) by the extensional structures related to a (also sinistral) transtensional movement stage, associated to volcanism (Macau, Messejana) and thermal doming processes during the Neogene-Pleistocene time interval. This structural model has direct implications to hydrocarbon exploration and exploitation activities at this sector of the Potiguar Basin and its offshore continuation. The structure of the reservoirs at depth (Açu Formation sandstones of the post-rift section) may be controlled (or at least, strongly influenced) by the deformation geometry and kinematics characterized at the surface. In addition, the deformation event recognized in the Barreiras Formation has an age close to the one postulated for the oil maturation and migration in the basin, between the Oligocene to the Miocene. In this way, the described structural cenario represents a valid model to understand the conditions of hydrocarbon transport and acummulation through space openings, trap formation and destruction. This model is potentially applicable to the NW region of the Potiguar Basin and other sectors with a similar structural setting, along the brazilian Equatorial Atlantic Margin
Resumo:
Pós-graduação em Geociências e Meio Ambiente - IGCE
Resumo:
The main goal in this research is a tectono-estructural characterization of the Cherne, Albacora and Namorado Fields, located at Campos Basin, in order to investigate the relationship between the geologic evolution and the rock´s physical properties of the reservoir, and how they affect the hydrocarbon accumulation in those fields. Well correlations show that the inferior turbidites have a regional lateral continuity. Basic petrophysics analysis, calculated here, shows that the three fields present porosity values that range from 15 to 20%, shale volume range from 26 to 30% and formation water saturation range from 23 to 45%, based on formation water resistivity dada from Albacora Field. Petrophysics maps feature a trend in Albacora Field that increase the porosity values to SE, and in Cherne and Namorado Field the trend increase towards N. Seismic horizons where interpreted between the first appearance of the Namorado Sandstone and the top of Quissamã Formation. This interval presents normal listric faulting, in Cherne and Namorado Field with NWSE and NE-SW direction, and sedimentation trend to NW-SE, in Albacora Field the faulting presents a NNE-SSW and N-S direction, with a sedimentation trend to NE-SW. Seismic attribute maps present amplitude anomalies close to the producing wells, and on Namorado Field, it indicates a potential hydrocarbon accumulation in the NE region. For each field is indicated laboratory tests for a better characterization of the petrophysical properties, since that they don’t form the same reservoir level, therefore, not influencing the water saturation calculation
Resumo:
Em princípios de 1946 o Conselho Nacional do Petróleo iniciou seus estudos sísmicos na foz do rio Amazonas, tendo então averiguado a existência de uma fossa de 60 mil \'km POT.2\', com espessuras entre mil e três mil metros. Como vemos na fig. 1, esta fossa inicia-se aproximadamente a 200 km ao sul de Belém, estendendo-se mais 500 km para o norte, atravessando as ilhas de Marajó e Mexiana, prolongando-se pelo oceano Atlântico. Sua largura é de aproximadamente 120 km. Uma segunda fossa com mil metros de espessura de sedimentos foi assinalada pelos estudos geofísicos do Conselho Nacional do Petróleo, sendo seu eixo aproximadamente concordante com o curso do rio Amazonas, estendendo-se até os arredores de Monte Alegre. Nas proximidades de Antonio Lemos, uma evolução do cristalino indica a separação das duas fossas, sendo que a segunda é limitada ao norte e ao sul por afloramentos do cristalino nos rios Jarí, Paru e Xingu. (Dados lidos nos Relatórios do Conselho Nacional do Petróleo). Processos geofísicos de refração e reflexão indicaram a existência de falhamentos e de estruturas favoráveis ao acúmulo de petróleo (anticlinais) em três localidades: Limoeiro, Cururu e Badajós (fig.1). Uma vez feitas as perfurações nessas três localidades, com resultados negativos para petróleo, infelizmente, aproveitamos os testemunhos das duas primeiras perfurações, com o objetivo de procurarmos esclareceer a estrutura geral das camadas, condições de formação dos sedimentos amostrados, ambiente geográfico e tectônico e provável idade das rochas estudadas. Por motivo de força maior não nos foi possível estudar a testemunhagem da terceira perfuração. Limitamo-nos a estudar alguns fragmentos típicos, mais representativos, gentilmente cedidos pelo Dr. Setembrino Petri. Deixo aqui os meus agradecimentos ao Conselho Nacional do Petróleo pelas facilidades que nos foram proporcionadas a fim de que pudéssemos realizar tal trabalho. Agradeço ) também ao Prof. Dr. Viktor Leinz pela criteriosa orientação dada ao presente trabalho.
Resumo:
In the oil prospection research seismic data are usually irregular and sparsely sampled along the spatial coordinates due to obstacles in placement of geophones. Fourier methods provide a way to make the regularization of seismic data which are efficient if the input data is sampled on a regular grid. However, when these methods are applied to a set of irregularly sampled data, the orthogonality among the Fourier components is broken and the energy of a Fourier component may "leak" to other components, a phenomenon called "spectral leakage". The objective of this research is to study the spectral representation of irregularly sampled data method. In particular, it will be presented the basic structure of representation of the NDFT (nonuniform discrete Fourier transform), study their properties and demonstrate its potential in the processing of the seismic signal. In this way we study the FFT (fast Fourier transform) and the NFFT (nonuniform fast Fourier transform) which rapidly calculate the DFT (discrete Fourier transform) and NDFT. We compare the recovery of the signal using the FFT, DFT and NFFT. We approach the interpolation of seismic trace using the ALFT (antileakage Fourier transform) to overcome the problem of spectral leakage caused by uneven sampling. Applications to synthetic and real data showed that ALFT method works well on complex geology seismic data and suffers little with irregular spatial sampling of the data and edge effects, in addition it is robust and stable with noisy data. However, it is not as efficient as the FFT and its reconstruction is not as good in the case of irregular filling with large holes in the acquisition.
Resumo:
In the oil prospection research seismic data are usually irregular and sparsely sampled along the spatial coordinates due to obstacles in placement of geophones. Fourier methods provide a way to make the regularization of seismic data which are efficient if the input data is sampled on a regular grid. However, when these methods are applied to a set of irregularly sampled data, the orthogonality among the Fourier components is broken and the energy of a Fourier component may "leak" to other components, a phenomenon called "spectral leakage". The objective of this research is to study the spectral representation of irregularly sampled data method. In particular, it will be presented the basic structure of representation of the NDFT (nonuniform discrete Fourier transform), study their properties and demonstrate its potential in the processing of the seismic signal. In this way we study the FFT (fast Fourier transform) and the NFFT (nonuniform fast Fourier transform) which rapidly calculate the DFT (discrete Fourier transform) and NDFT. We compare the recovery of the signal using the FFT, DFT and NFFT. We approach the interpolation of seismic trace using the ALFT (antileakage Fourier transform) to overcome the problem of spectral leakage caused by uneven sampling. Applications to synthetic and real data showed that ALFT method works well on complex geology seismic data and suffers little with irregular spatial sampling of the data and edge effects, in addition it is robust and stable with noisy data. However, it is not as efficient as the FFT and its reconstruction is not as good in the case of irregular filling with large holes in the acquisition.
Resumo:
In recent years, the DFA introduced by Peng, was established as an important tool capable of detecting long-range autocorrelation in time series with non-stationary. This technique has been successfully applied to various areas such as: Econophysics, Biophysics, Medicine, Physics and Climatology. In this study, we used the DFA technique to obtain the Hurst exponent (H) of the profile of electric density profile (RHOB) of 53 wells resulting from the Field School of Namorados. In this work we want to know if we can or not use H to spatially characterize the spatial data field. Two cases arise: In the first a set of H reflects the local geology, with wells that are geographically closer showing similar H, and then one can use H in geostatistical procedures. In the second case each well has its proper H and the information of the well are uncorrelated, the profiles show only random fluctuations in H that do not show any spatial structure. Cluster analysis is a method widely used in carrying out statistical analysis. In this work we use the non-hierarchy method of k-means. In order to verify whether a set of data generated by the k-means method shows spatial patterns, we create the parameter Ω (index of neighborhood). High Ω shows more aggregated data, low Ω indicates dispersed or data without spatial correlation. With help of this index and the method of Monte Carlo. Using Ω index we verify that random cluster data shows a distribution of Ω that is lower than actual cluster Ω. Thus we conclude that the data of H obtained in 53 wells are grouped and can be used to characterize space patterns. The analysis of curves level confirmed the results of the k-means