Estudos sobre a utilização de pentóxido de nióbio nanoestruturado na produção de biodiesel

In heterogeneous catalysis, numerous elements such as titanium and iron have been studied as nanoscale catalysts, but little is known about the use of niobium in nanocatalysis. The nanostructured particles have intrinsic and different physicochemical characteristics with great potential for use in industrial scale. Brazil having the largest known worldwide niobium reserve has the great challenge of creating pioneering technologies with the metal. Biodiesel is an alternative fuel and renewable substitute for regular diesel. Being biodegradable, non-toxic and have CO2 emissions lower than regular diesel, it contributes to the environment and to the independence from oil. The aim of this work was initially synthesize nanoscale particles of niobium pentoxide (Nanospheres, nanorods, nanofibers, nanocubes) from the sol-gel technique. The characterization of different nanoscale structures obtained was performed using different analytical techniques such as x-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). The synthesized nanometer niobium oxide will be used as a heterogeneous catalyst in biodiesel synthesis from commercial soybean oil, checking in detail what the effect of morphology is presented (Nanospheres, nanorods, nanofibers, nanocubes) in the yield of biodiesel synthesis, comparing these results with those already described in literature for the amorphous niobium oxide and other oxide catalysts. The biodiesel obtained was characterized by gas chromatography system equipped with a FID detector

Estudo e desenvolvimento de um capacitor eletrolítico de nióbio

It seeks to find an alternative to the current tantalum electrolytic capacitors in the market due to its high cost. Niobium is a potential substitute, since both belong to the same group of the periodic table and because of this have many similar physical and chemical properties. Niobium has several technologically important applications, and Brazil has the largest reserves, around 96%. There are including niobium in reserves of tantalite and columbite in Rio Grande do Norte. These electrolytic capacitors have high capacitance specifies, ie they can store high energy in small volumes compared to other types of capacitors. This is the main attraction of this type of capacitor because is growing demand in the production of capacitors with capacitance specifies increasingly high, this because of the miniaturization of various devices such as GPS devices, televisions, computers, phones and many others. The production route of the capacitor was made by powder metallurgy. The initial niobium powder supplied by EEL-USP was first characterized by XRD, SEM, XRF and laser particle size, to then be sieved into three particle size, 200, 400 e 635mesh. The powders were then compacted and sintered at 1350, 1450 and 1550°C using two sintering time 30 and 60min. Sintering is one of the most important parts of the process as it affects properties as porosity and surface cleaning of the samples, which greatly affected the quality of the capacitor. The sintered samples then underwent a process of anodic oxidation, which created a thin film of niobium pentóxido over the whole porous surface of the sample, this film is the dielectric capacitor. The oxidation process variables influence the performance of the film and therefore the capacitor. The samples were characterized by electrical measurements of capacitance, loss factor, ESR, relative density, porosity and surface area. After the characterizations was made an annealing in air ate 260ºC for 60min. After this treatment were made again the electrical measurements. The particle size of powders and sintering affected the porosity and in turn the specific area of the samples. The larger de area of the capacitor, greater is the capacitance. The powder showed the highest capacitance was with the smallest particle size. Higher temperatures and times of sintering caused samples with smaller surface area, but on the other hand the cleaning surface impurities was higher for this cases. So a balance must be made between the gain that is achieved with the cleaning of impurities and the loss with the decreased in specific area. The best results were obtained for the temperature of 1450ºC/60min. The influence of annealing on the loss factor and ESR did not follow a well-defined pattern, because their values increased in some cases and decreased in others. The most interesting results due to heat treatment were with respect to capacitance, which showed an increase for all samples after treatment

Estudo e desenvolvimento de um capacitor eletrolítico de nióbio

It seeks to find an alternative to the current tantalum electrolytic capacitors in the market due to its high cost. Niobium is a potential substitute, since both belong to the same group of the periodic table and because of this have many similar physical and chemical properties. Niobium has several technologically important applications, and Brazil has the largest reserves, around 96%. There are including niobium in reserves of tantalite and columbite in Rio Grande do Norte. These electrolytic capacitors have high capacitance specifies, ie they can store high energy in small volumes compared to other types of capacitors. This is the main attraction of this type of capacitor because is growing demand in the production of capacitors with capacitance specifies increasingly high, this because of the miniaturization of various devices such as GPS devices, televisions, computers, phones and many others. The production route of the capacitor was made by powder metallurgy. The initial niobium powder supplied by EEL-USP was first characterized by XRD, SEM, XRF and laser particle size, to then be sieved into three particle size, 200, 400 e 635mesh. The powders were then compacted and sintered at 1350, 1450 and 1550°C using two sintering time 30 and 60min. Sintering is one of the most important parts of the process as it affects properties as porosity and surface cleaning of the samples, which greatly affected the quality of the capacitor. The sintered samples then underwent a process of anodic oxidation, which created a thin film of niobium pentóxido over the whole porous surface of the sample, this film is the dielectric capacitor. The oxidation process variables influence the performance of the film and therefore the capacitor. The samples were characterized by electrical measurements of capacitance, loss factor, ESR, relative density, porosity and surface area. After the characterizations was made an annealing in air ate 260ºC for 60min. After this treatment were made again the electrical measurements. The particle size of powders and sintering affected the porosity and in turn the specific area of the samples. The larger de area of the capacitor, greater is the capacitance. The powder showed the highest capacitance was with the smallest particle size. Higher temperatures and times of sintering caused samples with smaller surface area, but on the other hand the cleaning surface impurities was higher for this cases. So a balance must be made between the gain that is achieved with the cleaning of impurities and the loss with the decreased in specific area. The best results were obtained for the temperature of 1450ºC/60min. The influence of annealing on the loss factor and ESR did not follow a well-defined pattern, because their values increased in some cases and decreased in others. The most interesting results due to heat treatment were with respect to capacitance, which showed an increase for all samples after treatment

Desenvolvimento de um protótipo para alimentação de pós para aspersão térmica em tocha de plasma

The nanometric powders have special features that usually result in new properties, originating applications or expanding them in various fields of knowledge. Because having a high area/volume ratio, phenomena such as superficial strength of adsorption becomes greater than the weight of the powder which makes more difficult its handling. The high power of agglomeration of these powders requires study and development of equipments to enable its management into the plasma torch. The objective of this work is to develop a powder feeder which can solve the mainly problems about insertion of powder into the thermal spray developed in the laboratory of plasmas, which are carried out with plasma torch arc not transferred (plasma spray). Therefore, it was made a aluminum s powder feeder and tests were performed to verify their operation and determine its rate of deposition by spraying powders of niobium pentoxide (Nb2O5) and titanium dioxide (TiO2) with particle sizes less than 250 mesh (<0.063 mm). We used masses of 0.5 g - 1.0 g and 1.5 g of each powder in tests lasting 15 seconds - 20 to 25 seconds for each mass. The tests were performed in two ways: at atmospheric pressure using argon gas with a flow of 9 l / min as carrier gas and through a Venturi pipe also using argon gas with a flow of 9 l / min as carrier gas and with a flow of 20 l/min as the feed gas passing through the Venturi pipe. The powder feeder developed in this paper is very easy to be handling and building, resulting in feeding rate of 0.25 cm3/min - 1.37 cm3/min. The TiO2 showed higher feeding rates than the Nb2O5 in all tests, and the best rates were obtained with tests using mass 1.5 g and time of 15 seconds, reaching feeding rate of 1.37 cm3/min. The flow of feed had low interference in feeding rate during the tests

Obtenção de pós de Nb a partir da redução aluminotérmica com ignição por plasma

The aluminothermic reduction consists in an exothermic reaction between a metallic oxide and aluminum to produce the metal and the scum. The extracted melted metal of that reaction usually comes mixed with particles of Al2O3 resulting of the reduction, needing of subsequent refine to eliminate the residual impure as well as to eliminate porosities. Seeking to obtain a product in powder form with nanometric size or even submicrometric, the conventional heat source of the reaction aluminothermic , where a resistor is used (ignitor) as ignition source was substituted, for the plasma, that acts more efficient way in each particle of the sample. In that work it was used as metallic oxide the niobium pentoxide (Nb2O5) for the exothermal reaction Nb2O5 + Al. Amounts stoichiometric, substoichiometric and superestoichiometric of aluminum were used. The Nb2O5 powder was mixed with aluminum powder and milled in planetarium of high energy for a period of 6 hours. Those powders were immerged in plasm that acts in a punctual way in each particle, transfering heat, so that the reaction can be initiate and spread integrally for the whole volume of the particle. The mixture of Nb2O5 + Al was characterized through the particle size analysis by laser and X-ray diffraction (DRX) and the obtained product of reaction was characterized using the electronic microscopy of sweeping (MEV) and the formed phases were analyzed by DRX. Niobium powders with inferior sizes to 1 mm were obtained by that method. It is noticed, through the analysis of the obtained results, that is possible to accomplish the aluminothermic reduction process by plasma ignition with final particles with inferior sizes to the original oxide

Blocos cerâmicos varistores (resistores não-lineares) para aplicações em altas, médias e baixas tensões e respectivo método de obtenção

A presente invenção refere-se a composições vanstoras à base de óxidos metálicos, mais particularmente à base de diáxido de estanho (SnO~ 2~) com a adição de óxidos metálicos dopantes, preferencialmente óxido de cobalto (CoO), pentóxido de nióbio (Nb~ 2~O~ 5~) e triáxido de cromo (Cr~ 2~O~ 3~), para conformação de e blocos cerâmicos varistores cujas propriedades eletrónicas não-óhmicas finais são independentes das dimensões dos corpos cerâmicos. A independência das propriedades não-óhmicas em relação às dimensões do corpo permite que uma mesma composição varistora seja utilizada em aplicações para baixas, médias e altas tensões.

Desenvolvimento de células solares de perovskita baseadas em filmes de óxidos nanoestruturados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento de células solares de perovskita baseadas em filmes de óxidos nanoestruturados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização por microscopia eletrônica de transmissão do aço SAE5115 microligado ao nióbio para cementação em altas temperaturas

A busca de uma maior competitividade tem levado a indústria a utilizar temperaturas de cementação cada vez mais elevadas. Este aumento na temperatura permite uma significativa diminuição dos tempos de tratamentos, porém pode levar a um aumento generalizado ou anormal do tamanho de grão austenítico bastante deletério as propriedades mecânicas do material. A utilização de elementos formadores de precipitados é uma alternativa para minimizar este problema. Neste trabalho foi estudado um aço SAE 5115 com adição de 0,038% em peso nióbio para ancoramento de grão. Para este estudo foi simulado um tratamento térmico de cementação em temperaturas mais elevadas, como 1000 e 1050°C, por duas horas, partindo-se de duas condições, bruto de laminação e esferoidizado. A técnica de microscopia eletrônica de transmissão (MET) foi empregada para caracterizar os precipitados, bem como avaliar sua contribuição no ancoramento do grão. A caracterização dos precipitados quanto sua composição, morfologia, tamanho e distribuição, foi realizada analisando-se amostras preparadas por extração de réplicas em filme de carbono e por lâminas finas pelo método de polimento plano no “Tripod Polisher”. Sendo que este último, convencionalmente não utilizado em aço, possibilita a obtenção de amostras com extensa área fina para observação no MET, além de facilitar a análise por minimizar o efeito de desvio de feixe em amostras magnéticas. Os resultados das análises comprovam a precipitação de partículas complexas de Nb e que a forma de distribuição, bem como o percentual de tamanho dos precipitados é de suma importância para o ancoramento do grão. Verificou-se uma tendência maior para o aparecimento de grão anormal nas amostras que sofreram o processo de esferoidização.

Desenvolvimento de um aço SAE 5115 microligado ao nióbio para cementação a alta temperatura

Este trabalho busca desenvolver um aço para cementação a alta temperatura através da adição de nióbio como microligante, a fim de que os compostos formados forneçam partículas de segunda fase que atuem como ancoradoras do grão austenítico, já que o processo de crescimento de grão, especialmente anormal, é conseqüência natural das temperaturas envolvidas. A elevação da temperatura tem como objetivo proporcionar um ganho em produtividade pela redução dos tempos de cementação. Procura-se também estabelecer uma comparação do aço proposto a aços de cementação convencionais (DIN 17Cr3 e SAE 5115). Utilizou-se um aço SAE 5115 com 0,034% de nióbio, que foi submetido a diferentes condições de ensaio em laboratório: deformação a frio por compressão livre em três graus de deformação (isento, 25 e 50%); com posterior aquecimento em patamares de temperatura que simulam diferentes níveis de cementação (930 , 950 , 1000 e 1050 C), bem como diferentes tempos de manutenção em temperatura, de tal forma a atingir camadas cementadas hipotéticas em torno de 1,0 mm de profundidade. Encerram-se os testes submetendo o aço estudado a um processo de produção industrial de pinos de pistão, que sofrem deformação a temperatura ambiente e cementação a 950 C por 2,5 h O aço SAE 5115 ao “Nb” mostrou um melhor desempenho no controle dos grãos austeníticos, tanto para os ensaios de simulação realizados em laboratório e comparados ao aço DIN 17Cr3, como frente ao processo de produção de pinos de pistão tendo como comparativo o aço SAE 5115. O modelo teórico de Hudd e outros (que trata os carbonitretos de nióbio como de extensiva solubilidade mútua) e o de Gladman (que define os nitretos de alumínio e de nióbio como mutuamente exclusivos), associados às equações de Wagner (para coalescimento das partículas de segunda fase), bem como à equação de Gladman e Pickering (que determina o raio crítico de partícula para uma distribuição aleatória de partículas), mostraram-se bastante adequados em prever a resposta das partículas precipitadas, partindo-se da composição química do aço, principalmente para as partículas de carbonitreto de nióbio em condições que não envolvessem níveis elevados de deformação.

Caracterização metalúrgica do aço SAE 1141 microligado ao nióbio por simulação física

Este trabalho analisa, através do emprego de simulador físico, os efeitos da adição do nióbio no aço SAE 1141 e seu comportamento como refinador de grão e endurecedor por precipitação, nas altas temperaturas de forjamento e tempos de reaquecimento aplicados industrialmente. Analisa também qual a influência das deformações e velocidades de resfriamento sobre o tamanho de grão austenítico, microestrutura, dureza, cinética da precipitação e propriedades finais. Na definição dos parâmetros de simulação foram observadas rotinas de produção de peças forjadas comercialmente, a literatura técnica, e possíveis alterações que otimizassem as propriedades do aço em estudo. Para tanto foram definidas as temperaturas de forjamento 1100, 1200 e 1250°C, a taxa de deformação de 1/s, as deformações de 30, 50 e 70%, e as velocidades de resfriamento de 36, 60, 100 e 150°C/min. Os resultados indicaram que a velocidade de resfriamento tem papel preponderante na microestrutura final, que variou de um agregado de ferrita e perlita para bainita (às vezes com alguma martensita) a medida em que a velocidade de resfriamento aumenta. A simulação térmica indicou que tamanho de grão austenítico aumenta a medida em que se eleva a temperatura de reaquecimento e que existe apenas um pequeno efeito ancorador de grão do nióbio nesse quesito, quando não estiver presente alguma deformação Foi observado, através da simulação física que, com a presença de deformação, principalmente para as temperaturas menores de reaquecimento, a precipitação induzida por deformação parece ancorar o crescimento dos grãos recristalizados, resultando num tamanho de grão austenítico menor. Esse trabalho constitui parte integrante do projeto de desenvolvimento da tecnologia dos aços microligados, num esforço conjunto do Laboratório de Metalurgia Física – LAMEF, através do Grupo de Desenvolvimento de Aços Microligados, da Universidade Federal do Rio Grande do Sul, em parceria com a Aços Finos Piratini e DANA – Albarus, com o apoio da CAPES.

Sinterização de aço inoxidável reforçado com partículas nanométricas dispersas de carbeto de nióbio - NbC

Metal powder sintering appears to be promising option to achieve new physical and mechanical properties combining raw material with new processing improvements. It interest over many years and continue to gain wide industrial application. Stainless steel is a widely accepted material because high corrosion resistance. However stainless steels have poor sinterability and poor wear resistance due to their low hardness. Metal matrix composite (MMC) combining soft metallic matrix reinforced with carbides or oxides has attracted considerable attention for researchers to improve density and hardness in the bulk material. This thesis focuses on processing 316L stainless steel by addition of 3% wt niobium carbide to control grain growth and improve densification and hardness. The starting powder were water atomized stainless steel manufactured for Höganäs (D 50 = 95.0 μm) and NbC produced in the UFRN and supplied by Aesar Alpha Johnson Matthey Company with medium crystallite size 16.39 nm and 80.35 nm respectively. Samples with addition up to 3% of each NbC were mixed and mechanically milled by 3 routes. The route1 (R1) milled in planetary by 2 hours. The routes 2 (R2) and 3 (R3) milled in a conventional mill by 24 and 48 hours. Each milled samples and pure sample were cold compacted uniaxially in a cylindrical steel die (Ø 5 .0 mm) at 700 MPa, carried out in a vacuum furnace, heated at 1290°C, heating rate 20°C stand by 30 and 60 minutes. The samples containing NbC present higher densities and hardness than those without reinforcement. The results show that nanosized NbC particles precipitate on grain boundary. Thus, promote densification eliminating pores, control grain growth and increase the hardness values

Comportamento da adição do carbeto de nióbio (nBC) na matriz metálica do aço ferrítico 15kH2mfa

The 15Kh2MFA steel is a kind of Cr-Mo-V family steels and can be used in turbines for energy generation, pressure vessels, nuclear reactors or applications where the range of temperature that the material works is between 250 to 450°C. To improve the properties of these steels increasing the service temperature and the thermal stability is add a second particle phase. These particles can be oxides, carbides, nitrites or even solid solution of some chemical elements. On this way, this work aim to study the effect of addition of 3wt% of niobium carbide in the metallic matrix of 15Kh2MFA steel. Powder metallurgy was the route employed to produce this metallic matrix composite. Two different milling conditions were performed. Condition 1: milling of pure 15Kh2MFA steel and condition 2: milling of 15Kh2MFA steel with addition of niobium carbide. A high energy milling was carried out during 5 hours. Then, these two powders were sintered in a vacuum furnace (10-4torr) at 1150 and 1250°C during 60 minutes. After sintering the samples were normalized at 950°C per 3 minutes followed by air cooling to obtain a desired microstructure. Results show that the addition of niobium carbide helps to mill faster the particles during the milling when compared with that steel without carbide. At the sintering, the niobium carbide helps to sinter increasing the density of the samples reaching a maximum density of 7.86g/cm³, better than the melted steel as received that was 7,81g/cm³. In spite this good densification, after normalizing, the niobium carbide don t contributed to increase the microhardness. The best microhardness obtained to the steel with niobium carbide was 156HV and to pure 15Kh2MFA steel was 212HV. It happened due when the niobium carbide is added to the steel a pearlitic structure was formed, and the steel without niobium carbide submitted to the same conditions reached a bainitic structure

Avaliação cinética e potencial do Nb2O5 obtido a partir de um complexo de nióbio para formação do oleato de metila através da reação de esterificação do ácido oleico

Among the heterogeneous catalysts materials made from niobium show up as an alternative to meet the demand of catalysts for biodiesel production. This study aims to evaluate the potential of a heterogeneous catalyst derived from a complex of niobium in the reaction of methyl esterification of oleic acid. The catalyst was synthesized after calcination at different temperatures of a niobium complex ((NH4)3[NbO(C2O4)3].H2O) generating a niobium oxide nanostructure with a different commercial niobium oxide used to synthesize the complex. The commercial niobium oxide, the complex niobium and niobium catalyst were characterized by thermogravimetry (TG and DTA), surface area analysis (BET), scanning electron microscopy (SEM) and X-ray diffraction (XRD), showing the catalyst has researched morphological and crystallographic indicating a catalytic potential higher than that of commercial niobium oxide characteristics. Factorial with central composite design point, with three factors (calcination temperature, molar ratio of alcohol/oleic acid and mass percentage of catalyst) was performed. Noting that the optimal experimental point was given by the complex calcination temperature of 600°C, a molar ratio alcohol/oleic acid of 3.007/1 and the catalyst mass percentage of 7.998%, with a conversion of 22.44% oleic acid in methyl oleate to 60 min of reaction. We performed a composite linear and quadratic regression to determine an optimal statistical point of the reaction, the temperature of calcination of the complex at 450°C, the molar ratio of alcohol/oleic acid 3.3408/1 and mass percentage of catalyst of 7.6833% . Kinetic modeling to estimate parameters for heterogeneous catalysis it set well the experimental results with a final conversion of 85.01% with 42.38% of catalyst and without catalyst at 240 min reaction was performed. Allowing to evaluate the catalyst catalytic studied has the potential to be used in biodiesel production

Desenvolvimento de um secador spray para obtenção de pós finos de precursores de nióbio

This work presents a spray-dryer designed to oxalate-niobate precursors and suitable for the production of Niobium Carbide. The dryer was intended to produce powders of controlled particle size. First, the precursor is dissolved in water to produce a solution of known concentration and then it is atomized on the spray-dryer to produce the powder. This equipment consists of a 304 stainless steel chamber, 0.48 m x 1.9 m (diameter x length), with a conical shape at the lower portion, which is assembled on a vertical platform. The chamber is heated by three 4 kW electrical resistances. In this process, drying air is heated as it flows inside a serpentine surrounding the chamber, in contrary to more traditional processes in which the hot drying air is used to heat the component. The air enters the chamber at the same temperature of the chamber, thus avoiding adherence of particles on the internal surface. The low speed flow is concurrent, directed from the top to the bottom portion of the chamber. Powders are deposited on a 0.4 m diameter tray, which separates the cylindrical portion from the conical portion of the chamber. The humid air is discharged though a plug placed underneath the collecting tray. A factorial experimental planning was prepared to study the influence of five parameters (concentration, input flow, operation temperature, drying air flow and spray air flow) on the characteristics of the powders produced. Particle size distribution and shape were measured by laser granulometry and scanning electronic microscopy. Then, the powders are submitted to reaction in a CH4 / H2 atmosphere to compare the characteristics of spray-dried powders with powders synthetizided by conventional methods