Echinococcus granulosus genotypes circulating in alpacas (Lama pacos) and pigs (Sus scrofa) from an endemic region in Peru

The identification of the genotypes of Echinococcus granulosus present in livestock and wild animals within regions endemic for cystic echinococcosis (CE) is epidemiologically important. Individual strains display different biological characteristics that contribute to outbreaks of CE and that must be taken into account in the design of intervention programs. In this study, samples of hydatid cysts due to E. granulosus were collected from alpacas (4) in Puno and pigs (8) in Ayacucho in Peru, an endemic region for CE. Polymerase chain reaction amplification and DNA sequencing of specific regions of the mitochondrial cytochrome C oxidase subunit 1 and NADH dehydrogenase subunit 1 genes confirmed the presence of a strain common to sheep, the G1 genotype, in alpacas. Two different strains of E. granulosus were identified in pigs: the G1 and the G7 genotypes. This is the first report of the G1 genotype of E. granulosus in alpacas in endemic regions of CE in Peru.

Montagem e caracterização elétrica de pilhas a combustível de óxido sólido (PaCOS)

This paper is focused on a review of the design features and the electrochemistry characterization of anode-supported planar SOFC. Studies and results of metallic alloy interconnectors and recovery for protection against corrosion and for contact layer are showed. Moreover a discussion of examples of measurements of impedance spectrometry, according to the literature and our experimental results are made. For the anode supported fuel cells the power density varies from 0.1 to 0.5 Wcm², according to results in the literature (showed in this paper). For electrolyte supported fuel cell the power density can be 10 Wcm-2 for high temperatures. An English-Portuguese glossary of most used terms in SOFC stack is given for greater clarity and to introduce new terms to the reader.

Estudo da viabilidade do sistema LZAS para uso como selante de PaCOS

Cells the solid oxide fuel are systems capable to directly convert energy of a chemical reaction into electric energy in clean, quiet way and if its components in the solid state differentiate of excessively the techniques for having all. Its more common geometric configurations are: the tubular one and to glide. Geometry to glide beyond the usual components (anode, cathode and electrolyte) needs interconnect and sealant. E the search for materials adjusted for these components is currently the biggest challenge found for the production of the cells. The sealants need to present chemical stability in high temperatures, to provoke electric isolation, to have coefficient of compatible thermal expansion with the excessively component ones. For presenting these characteristics the glass-ceramics materials are recommended for the application. In this work the study of the partial substitution of the ZrO2 for the Al2O3 in system LZS became it aiming at the formation of system LZAS, this with the addition of natural spodumene with 10, 20 and 30% in mass. The compositions had been casting to a temperature of 1500°C and later quickly cooled with the objective to continue amorphous. Each composition was worn out for attainment of a dust with average diameter of approximately 3μm and characterized by the techniques of DRX, FRX, MEV, dilatometric analysis and particle size analysis. Later the samples had been conformed and treated thermally with temperatures in the interval between 700-1000 °C, with platform of 10 minutes and 1 hour. The analyses for the treated samples had been: dilatometric analysis, DRX, FRX, electrical conductivity and tack. The results point with respect to the viability of the use of system LZAS for use as sealant a time that had presented good results as isolating electric, they had adhered to a material with similar α of the components of a SOFC and had presented steady crystalline phases

Estudo termo-mecânico de interconector metálico recoberto com filme de La0,8Ca0,2CrO3 e de interconector cerâmico de La0,8Sr0,2Cr0,92Co0,08O3 para PaCOS

Doped lanthanum chromite ( LaCrO3 ) has been the most common material used as interconnect in solid oxide fuel cells for high temperature ( SOFC-HT ) that enabling the stack of SOFCs. The reduction of the operating temperature, to around 800 º C, of solid oxide fuel cells enabled the use of metallic interconnects as an alternative to ceramic LaCrO3, From the practical point of view, to be a strong candidate for interconnect the material must have good physical and mechanical properties such as resistance to oxidizing and reducing environments, easy manufacture and appropriate thermo-mechanical properties. Thus, a study on the physic-mechanical interconnects La0,8Sr0,2Cr0,92Co0,08O3 ceramics for SOFC -AT obtained by the method of combustion , as well as thermo-mechanical properties of metallic interconnects (AISI 444) covered with La0,8Ca0,2CrO3 by deposition technique by spray-pyrolysis fuel cells for intermediate temperature (IT-SOFCs). The La0,8Sr0,2Cr0,92Co0,08O3 was characterized by X -ray diffraction(XRD) , density and porosity , Vickers hardness (HV) , the flexural strength at room temperature and 900 °C and scanning electron microscopy (SEM). The X -ray diffraction confirmed the phase formation and LaCrO3 and CoCr2O4, in order 6 GPa hardness and mechanical strength at room temperature was 62 MPa ceramic Interconnector. The coated metal interconnects La0,8Ca0,2CrO3 passed the identification by XRD after deposition of the film after the oxidation test. The oxidative behavior showed increased resistance to oxidation of the metal substrate covered by La0,8Ca0,2CrO3 In flexural strength of the coated metal substrate, it was noticed only in the increased room temperature. The a SEM analysis proved the formation of Cr2O3 and (Cr,Mn)3O4 layers on metal substrate and confirmed the stability of the ceramic La0,8 Ca0,2CrO3 film after oxidative test

Parentage testing in alpacas (Vicugna pacos) using semi-automated fluorescent multiplex PCRs with 10 microsatellite markers

The aim of this study was to assess and apply a microsatellite multiplex system for parentage determination in alpacas. An approach for parentage testing based on 10 microsatellites was evaluated in a population of 329 unrelated alpacas from different geographical zones in Peru. All microsatellite markers, which amplified in two multiplex reactions, were highly polymorphic with a mean of 14.5 alleles per locus (six to 28 alleles per locus) and an average expected heterozygosity (H-E) of 0.8185 (range of 0.698-0.946). The total parentage exclusion probability was 0.999456 for excluding a candidate parent from parentage of an arbitrary offspring, given only the genotype of the offspring, and 0.999991 for excluding a candidate parent from parentage of an arbitrary offspring, given the genotype of the offspring and the other parent. In a case test of parentage assignment, the microsatellite panel assigned 38 (from 45 cases) offspring parentage to 10 sires with LOD scores ranging from 2.19 x 10(+13) to 1.34 x 10(+15) and Delta values ranging from 2.80 x 10(+12) to 1.34 x 10(+15) with an estimated pedigree error rate of 15.5%. The performance of this multiplex panel of markers suggests that it will be useful in parentage testing of alpacas.

Estudo da viabilidade do sistema LZAS para uso como selante de PaCOS

Cells the solid oxide fuel are systems capable to directly convert energy of a chemical reaction into electric energy in clean, quiet way and if its components in the solid state differentiate of excessively the techniques for having all. Its more common geometric configurations are: the tubular one and to glide. Geometry to glide beyond the usual components (anode, cathode and electrolyte) needs interconnect and sealant. E the search for materials adjusted for these components is currently the biggest challenge found for the production of the cells. The sealants need to present chemical stability in high temperatures, to provoke electric isolation, to have coefficient of compatible thermal expansion with the excessively component ones. For presenting these characteristics the glass-ceramics materials are recommended for the application. In this work the study of the partial substitution of the ZrO2 for the Al2O3 in system LZS became it aiming at the formation of system LZAS, this with the addition of natural spodumene with 10, 20 and 30% in mass. The compositions had been casting to a temperature of 1500°C and later quickly cooled with the objective to continue amorphous. Each composition was worn out for attainment of a dust with average diameter of approximately 3μm and characterized by the techniques of DRX, FRX, MEV, dilatometric analysis and particle size analysis. Later the samples had been conformed and treated thermally with temperatures in the interval between 700-1000 °C, with platform of 10 minutes and 1 hour. The analyses for the treated samples had been: dilatometric analysis, DRX, FRX, electrical conductivity and tack. The results point with respect to the viability of the use of system LZAS for use as sealant a time that had presented good results as isolating electric, they had adhered to a material with similar α of the components of a SOFC and had presented steady crystalline phases

Estudo termo-mecânico de interconector metálico recoberto com filme de La0,8Ca0,2CrO3 e de interconector cerâmico de La0,8Sr0,2Cr0,92Co0,08O3 para PaCOS

Doped lanthanum chromite ( LaCrO3 ) has been the most common material used as interconnect in solid oxide fuel cells for high temperature ( SOFC-HT ) that enabling the stack of SOFCs. The reduction of the operating temperature, to around 800 º C, of solid oxide fuel cells enabled the use of metallic interconnects as an alternative to ceramic LaCrO3, From the practical point of view, to be a strong candidate for interconnect the material must have good physical and mechanical properties such as resistance to oxidizing and reducing environments, easy manufacture and appropriate thermo-mechanical properties. Thus, a study on the physic-mechanical interconnects La0,8Sr0,2Cr0,92Co0,08O3 ceramics for SOFC -AT obtained by the method of combustion , as well as thermo-mechanical properties of metallic interconnects (AISI 444) covered with La0,8Ca0,2CrO3 by deposition technique by spray-pyrolysis fuel cells for intermediate temperature (IT-SOFCs). The La0,8Sr0,2Cr0,92Co0,08O3 was characterized by X -ray diffraction(XRD) , density and porosity , Vickers hardness (HV) , the flexural strength at room temperature and 900 °C and scanning electron microscopy (SEM). The X -ray diffraction confirmed the phase formation and LaCrO3 and CoCr2O4, in order 6 GPa hardness and mechanical strength at room temperature was 62 MPa ceramic Interconnector. The coated metal interconnects La0,8Ca0,2CrO3 passed the identification by XRD after deposition of the film after the oxidation test. The oxidative behavior showed increased resistance to oxidation of the metal substrate covered by La0,8Ca0,2CrO3 In flexural strength of the coated metal substrate, it was noticed only in the increased room temperature. The a SEM analysis proved the formation of Cr2O3 and (Cr,Mn)3O4 layers on metal substrate and confirmed the stability of the ceramic La0,8 Ca0,2CrO3 film after oxidative test

Tuberculosis in alpacas (Lama pacos) caused by Mycobacterium bovis

We report three cases of tuberculosis in alpacas from Spain caused by Mycobacterium bovis. The animals revealed two different lesional patterns. Mycobacterial culture and PCR assay yielded positive results for M. bovis. Molecular typing of the isolates identified spoligotype SB0295 and identical variable-number tandem repeat (VNTR) allele sizes.

Criação, organização e gestão de uma empresa municipal: o caso da PFR Invest

O presente documento, elaborado especificamente para a minha candidatura às provas de “Especialista” pelo Instituto Politécnico do Porto, está centrado apenas na minha actividade profissional dos últimos 7 anos e considera a sua relação com uma futura atividade académica como docente. A possibilidade de participar na definição, criação, organização e gestão de uma empresa municipal, na qualidade de seu Diretor-Executivo e Presidente do Conselho de Administração, num processo iniciado no contexto do Regime Jurídico do Setor Empresarial Local de 2006, constituiu um momento central no meu processo de aprendizagem e investigação no domínio do Enquadramento na Organização / Empresa. No quadro de uma nova ordem mundial, onde o poder público é convocado a agir em prol do desenvolvimento das matrizes económicas, onde a concorrência pelos investimentos escassos é crescente e onde se aprofundou o problema do desemprego estrutural, torna-se urgente para os governos locais a elaboração de políticas públicas e privadas que potenciem os fatores locais, transformando-os em vantagens competitivas. O Município de Paços de Ferreira propôs-se desenvolver um modelo que decorreu diretamente do Regime Jurídico do Setor Empresarial Local (que veio promover e até estimular o desenvolvimento de iniciativas empresariais locais com um caráter racional e otimizado), e que pressupôs a criação de uma entidade empresarial municipal que realizasse o investimento necessário à concretização da zonas de acolhimento empresarial de Paços de Ferreira, assegurasse a sua gestão e a atração e captação de investimento privado gerador de riqueza e de emprego para o Concelho. Este relatório analisa, em detalhe, todos os passos na criação, organização e gestão dessa empresa municipal - a PFR Invest.

Caractérisation du rôle de l’amyline (IAPP) dans le diabète de type 2 : études de dérivés peptidiques et de composés inhibiteurs de la formation d’amyloïde

L’amyloïdose, une maladie progressive et incurable, implique une vaste panoplie de pathologies et de pathogénèses, qui est expliquée par la grande variabilité biologique et structurale des protéines responsables de la formation des dépôts d’amyloïde. L’amyline (polypeptide amyloïde des îlots pancréatiques, IAPP) est une protéine très susceptible de subir des changements de conformation impliquant les feuillets bêta et conférant aussi des propriétés physicochimiques distinctes. Cette protéine prend alors une forme fibrillaire et se dépose dans les îlots de Langerhans chez les humains atteints de diabète de type 2 ou d’insulinome. Ces dépôts d’amyloïde pancréatique (AIAPP) ont été décrits chez certaines espèces animales telles que les félins domestiques, les grands félins, le raton laveur et les primates non humains. La formation de dépôts d’amyloïde contribue à la pathogénèse du diabète de type 2, mais les mécanismes qui induisent la conversion de l’amyline (IAPP) en amyloïde (AIAPP) ne sont pas complètement compris. Les hypothèses du projet sont que certaines variations présentes dans les séquences peptidiques de l’IAPP provenant de différentes espèces animales jouent un rôle critique pour la formation de fibrilles et que plusieurs composés chimiques aromatiques/phénoliques sont capables d’abroger la formation de dépôts d’amyloïde. Le projet de recherche consiste donc à caractériser la propension des différentes isoformes animales d’IAPP à former de l’amyloïde in vitro afin d’identifier les acides aminés jouant un rôle clé dans cette transformation structurale et ultimement d’inhiber la formation d’amyloïde pancréatique. Le projet se divise en deux volets principaux. Le premier consiste à identifier les différentes séquences peptidiques de l’IAPP retrouvées chez les espèces animales. L’objectif est d’identifier les acides aminés jouant un rôle clé dans la formation d’amyloïde. Le gène de l’IAPP a été séquencé chez plus d’une quarantaine d’espèces. Le potentiel d’agrégation des séquences obtenues a été simulé à l’aide d’outils bioinformatique. Une librairie de 23 peptides a été commandée afin de procéder à des analyses physicochimiques in vitro permettant d’évaluer le potentiel amyloïdogénique (test fluorimétrique à la thioflavine T, essai de liaison au rouge Congo, dichroïsme circulaire, microscopie électronique à transmission) et cytotoxique (sur une lignée cellulaire provenant d’insulinome : INS-1). Les analyses effectuées à partir de la librairie constituée de 23 peptides ont permis d’identifier trois séquences ne formant pas d’amyloïde et qui proviennent des espèces animales suivantes : le tamarin lion doré (Leontopithecus rosalia), le grand dauphin (Tursiops truncatus) et l’alpaga (Vicugna pacos). Un site potentiellement critique est le segment 8-20 présentant le motif NFLVH qui ne forme plus d’amyloïde lorsqu’il est remplacé par le motif DFLGR ou KFLIR. Les acides aminés 29P, 14K et 18R sont également impliqués dans l’inhibition de la transformation structurale en fibrille. La dernière partie du projet consiste à inhiber la formation de l’amyloïde en utilisant des composés chimiques commercialisés (hypoglycémiants, anti-inflammatoires non stéroïdiens) ou nouvellement synthétisés dans notre laboratoire (les aryles éthyles urées). Un criblage d’une soixantaine de composés chimiques a été conduit dans cette étude. Leur efficacité a été testée sur l’IAPP humaine, qui possède un fort potentiel amyloïdogénique. Les techniques utilisées sont les mêmes que celles exploitées précédemment. L’essai de liaison croisée photo-induite ("photo-induced cross-linking of unmodified proteins", PICUP) a été réalisé afin d’étudier les formes intermédiaires (monomères, oligomères). Un total de 11 composés chimiques a démontré un potentiel à inhiber l’agrégation des fibrilles. Pour la classe des hypoglycémiants, le glyburide, le répaglinide et la troglitazone ont montré l’activité thérapeutique la plus élevée pour retarder et réduire la formation de fibrilles. Les anti-inflammatoires antiamyloïdogènes actifs incluaient le diclofenac, le méloxicam, le phénylbutazone, le sulindac et le ténoxicam. Les aryles étyles urées les plus intéressantes étaient la EU-362 et la EU-418. Tous ces composés ont conféré une protection cellulaire contre l’activité cytotoxique des fibrilles. Les molécules actives possèdent des éléments structuraux communs tels des substituants donneurs d’électrons (alcool, amine, halogène) sur un noyau benzène. En conclusion, ce projet de recherche a permis de caractériser l’IAPP chez diverses espèces animales, dont plusieurs chez lesquelles elle n’avait pas encore été décrite, de déterminer les sites jouant un rôle clé dans sa transformation en amyloïde et, ultimement, de tester le potentiel thérapeutique de nouveaux agents antiamyloïdogènes dans le diabète de type 2. Nous espérons que ce projet ouvrira ainsi la porte à de nouvelles stratégies de traitement.

Caracterização termo-mecânica de interconectores metálicos recobertos com filmes de LaCrO3

The cells unitaria of the solid oxide fuel cell are separated by means of interconnects, which serve as electrical contact between the cells. Lanthanum Chromite (LaCrO3) has been the most common material used as interconnect in solid oxide fuel cells. Reducing the operating temperature around 800 º C of cells to solid oxide fuel make possibilite the use of metallic interconnects as an alternative to ceramic LaCrO3. Metallic interconnects have advantages over ceramic interconnects such as high thermal conductivity, electricity, good ductility, low cost, good physical and mechanical properties. In this work evaluate the thermo-mechanical properties of the metallic substrate and coated metallic substrate with the ceramic LaCrO3 film via spray-pyrolysis, in order to demonstrate the feasibility of using this material as a component of a fuel cell solid oxide. The materials were characterized by X-ray diffraction, oxidation behavior, mechanical strength, optical microscopy (OM) and scanning electron microscopy (SEM). The X-ray diffraction proved the formation phase of the LaCrO3 on the metallic substrate and the identification of the phases formed after the oxidative test and mechanical strength at high temperature. The oxidation behavior showed the increased oxidation resistance of the coated metallic substrate. It was noted that the mechanical resistance to bending of the coated metallic substrate only increases at room temperature. The optical microscopy (OM) has provided an assessment of both the metallic substrate and the LaCrO3 film deposited on the metal substrate that, in comparison with the micrographs obtained from SEM. The SEM one proved the formation of Cr2O3 layer on the metallic substrate and stability of LaCrO3 film after oxidative test, it can also observe the displacement of the ceramic LaCrO3 film after of mechanical testing and mapping of the main elements as chromium, manganese, oxygen, lanthanum in samples after the thermo-mechanical tests.

The behavior of dissolved uranium in groundwaters of the Morro do Ferro thorium deposit, Brazil

Groundwater samples were collected for several months in boreholes drilled at Morro do Ferro, a thorium and rare earth deposit located on the Poços de Caldas Plateau, Minas Gerais State, Brazil. An aquifer system has developed in the weathered mantle due to in situ intense alteration. The weathered zone includes a thick argillaceous laterite greater than 100 m thick. The U content and 324U/238U activity ratio were measured in the groundwater samples and in spoil samples of a borehole drilled in the ore body. Some possible mechanisms related to the mobilization of uranium are considered such as complexation with humic substances and adsorption by clays. © 1989.