Avaliação da influência do diâmetro e comprimento do implante osseointegrado associado à PPR Classe I mandibular pelo método dos elementos finitos

Pós-graduação em Odontologia - FOA

Avaliação da influência da inclinação do rebordo e localização do implante na associação de uma PPR classe I mandibular ao implante pelo método dos elementos finitos

Pós-graduação em Odontologia - FOA

Influencia del nivel de inserción ósea del diente soporte en el desplazamiento de PPR de extremidad libre mandibular asociada al implante oseointegrado

The rehabilitation with mandibular distal extension removable partial dentures (DERPD) is complex and the use of implants has been improving the functioning of this approach. The insertion bony level around of the last support tooth is an aggravating factor, since it can harm the longevity of the treatment. Thus, the aim of this research was to evaluate the displacement tendency of a mandibular DERPD associated to an implant, with different insertion bony levels and different connections between the RPD and the support tooth, by finite element analysis. Eight models were made: MA - DERPD, incisal rest, no bony loss; MB - DERPD, distal plate, no bony loss; MC - DERPD, incisal rest, no bony loss, with implant and ERA system; MD - DERPD, distal plate, no bony loss, with implant and ERA system; ME - DERPD, incisal rest, bony loss; MF - DERPD, distal plate, bony loss; MG - DERPD, incisal rest, bony loss, with implant and ERA system; MH - DERPD, distal plate, bony loss, with implant and ERA system. Loads of 50 N in each peak were applied. Displacement maps were obtained and showed that implant favors this association and the bony loss harms the prognostic of the prosthesis. It is concluded that: the introduction of the implant with ERA system reduced the displacement tendency of the tooth and supporting structures; introduction of distal plate reduced the movement tendency of the support tooth; the decrease of the periodontal support didn't influence significantly the displacement tendency of the models with distal plate distal, but it influenced the models with distal incisal rest.

Análise comparativa da eficácia mastigatória entre doentes portadores de PPR acrílica e esquelética

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

Performance of RT-PCR-ELISA for the detection of peste des petits ruminants virus

A highly sensitive and specific reverse transcription polymerase chain reaction enzyme linked immunosorbent assay (RT-PCR-ELISA) was developed for the objective detection of nucleoprotein (N) gene of peste des petits ruminants (PPR) virus from field outbreaks or experimentally infected sheep. Two primers (IndF and Np4) and one probe (Sp3) available or designed for the amplification/probing of the 'N' gene of PPR virus, were chosen for labeling and use in RT-PCR-ELISA based on highest analytical sensitivity of detection of infective virus or N-gene containing recombinant plasmid, higher nucleotide homology at the primer binding sites of the 'N' gene sequences available and the ability to amplify PPR viral genome from different sources of samples. RT-PCR was performed with unlabeled IndF and Np4 digoxigenin labeled primers followed by a microplate hybridization probe reaction with biotin labeled Sp3 probe. RT-PCR-ELISA was found to be 10-fold more sensitive than the conventional RT-PCR followed by agarose gel based detection of PCR product. Based on the Mean (mean +/- 3S.D.) optical density (OD) values of 47 RT-PCR negative samples, OD values above 0.306 were considered positive in RT-PCR-ELISA. A total of 82 oculo-nasal swabs and tissue samples from suspected PPR cases were analyzed by RT-PCR and RT-PCR-ELISA, which revealed 54.87 and 58.54% positivity, respectively. From an experimentally infected sheep, both RT-PCR and RT-PCR-ELISA could detect the virus from 6 days post-infection up to 9 days in oculo-nasal swabs. On post-mortem, PPR viral genome was detected in spleen, lymph node, lung, heart and liver. The correlation co-efficient between RT-PCR-ELISA OD values and either TCID50 of virus or molecules of DNA was 0.622 and 0.657, respectively. The advantages of RT-PCR-ELISA over the conventional agarose gel based detection of RT-PCR products are discussed. (c) 2006 Elsevier B.V. All rights reserved.

Immune responses to hemagglutinin-neuraminidase protein of peste des petits ruminants virus expressed in transgenic peanut plants in sheep

Peste des petits ruminants (PPR) is an acute, highly contagious disease of small ruminants caused by a morbillivirus, Peste des petits ruminants virus (PPRV). The disease is prevalent in equatorial Africa, the Middle East, and the Indian subcontinent. A live attenuated vaccine is in use in some of the countries and has been shown to provide protection for at least three years against PPR. However, the live attenuated vaccine is not robust in terms of thermotolerance. As a step towards development of a heat stable subunit vaccine, we have expressed a hemagglutinin-neuraminidase (HN) protein of PPRV in peanut plants (Arachis hypogea) in a biologically active form, possessing neuraminidase activity. Importantly. HN protein expressed in peanut plants retained its immunodominant epitopes in their natural conformation. The immunogenicity of the plant derived HN protein was analyzed in sheep upon oral immunization. Virus neutralizing antibody responses were elicited upon oral immunization of sheep in the absence of any mucosal adjuvant. In addition, anti-PPRV-HN specific cell-mediated immune responses were also detected in mucosally immunized sheep. (C) 2010 Elsevier B.V. All rights reserved.

Photo-Defined Electrically Assisted Etching Method for Metal Stencil Fabrication

Metal stencils are well known in electronics printing application such as for dispensing solder paste for surface mounting, printing embedded passive elements in multilayer structures, etc. For microprinting applications using stencils, the print quality depends on the smoothness of the stencil aperture and its dimensional accuracy, which in turn are invariably related to the method used to manufacture the stencils. In this paper, fabrication of metal stencils using a photo-defined electrically assisted etching method is described. Apertures in the stencil were made in neutral electrolyte using three different types of impressed current, namely, dc, pulsed dc, and periodic pulse reverse (PPR). Dimensional accuracy and wall smoothness of the etched apertures in each of the current waveforms were compared. Finally, paste transfer efficiency of the stencil obtained using PPR was calculated and compared with those of a laser-cut electropolished stencil. It is observed that the stencil fabricated using current in PPR waveform has better dimensional accuracy and aperture wall smoothness than those obtained with dc and pulsed dc. From the paste transfer efficiency experiment, it is concluded that photo-defined electrically assisted etching method can provide an alternate route for fabrication of metal stencils for future microelectronics printing applications.

Language identification using parallel sub-word recognition

Parallel sub-word recognition (PSWR) is a new model that has been proposed for language identification (LID) which does not need elaborate phonetic labeling of the speech data in a foreign language. The new approach performs a front-end tokenization in terms of sub-word units which are designed by automatic segmentation, segment clustering and segment HMM modeling. We develop PSWR based LID in a framework similar to the parallel phone recognition (PPR) approach in the literature. This includes a front-end tokenizer and a back-end language model, for each language to be identified. Considering various combinations of the statistical evaluation scores, it is found that PSWR can perform as well as PPR, even with broad acoustic sub-word tokenization, thus making it an efficient alternative to the PPR system.

Global analysis of mRNA half-lives and de novo transcription in a dinoflagellate, Karenia brevis

Dinoflagellates possess many physiological processes that appear to be under post-transcriptional control. However, the extent to which their genes are regulated post-transcriptionally remains unresolved. To gain insight into the roles of differential mRNA stability and de novo transcription in dinoflagellates, we biosynthetically labeled RNA with 4-thiouracil to isolate newly transcribed and pre-existing RNA pools in Karenia brevis. These isolated fractions were then used for analysis of global mRNA stability and de novo transcription by hybridization to a K. brevis microarray. Global K. brevis mRNA half-lives were calculated from the ratio of newly transcribed to pre-existing RNA for 7086 array features using the online software HALO (Half-life Organizer). Overall, mRNA half-lives were substantially longer than reported in other organisms studied at the global level, ranging from 42 minutes to greater than 144 h, with a median of 33 hours. Consistent with well-documented trends observed in other organisms, housekeeping processes, including energy metabolism and transport, were significantly enriched in the most highly stable messages. Shorter-lived transcripts included a higher proportion of transcriptional regulation, stress response, and other response/regulatory processes. One such family of proteins involved in post-transcriptional regulation in chloroplasts and mitochondria, the pentatricopeptide repeat (PPR) proteins, had dramatically shorter half-lives when compared to the arrayed transcriptome. As transcript abundances for PPR proteins were previously observed to rapidly increase in response to nutrient addition, we queried the newly synthesized RNA pools at 1 and 4 h following nitrate addition to N-depleted cultures. Transcriptome-wide there was little evidence of increases in the rate of de novo transcription during the first 4 h, relative to that in N-depleted cells, and no evidence for increased PPR protein transcription. These results lend support to the growing consensus of post-transcriptional control of gene expression in dinoflagellates.

参与调控拟南芥叶绿体发育基因的初步功能研究

绿色植物的光合作用是地球上唯一大规模地把无机物转变为有机物，把光能转变为化学能的过程。叶绿体是植物进行光合作用的场所。因而，高等植物叶绿体发育与叶绿体功能维持的研究一直倍受人们关注。然而，目前参与高等植物中调控叶绿体发育过程的基因克隆以及这些基因在叶绿体发育过程中的分子机制知之甚少。本论文克隆并初步探讨了2个参与调控拟南芥叶绿体发育基因AtECB1和AtECB2。AtECB1基因编码一个高等植物所特有的，具有类似硫氧还蛋白结构的叶绿体蛋白质。该基因主要在地上部分表达，尤其在14天的幼苗中表达较强，且该基因的表达是受光诱导的。该基因的敲除导致了拟南芥叶绿体中仅有少数片层结构。这些片层不能进一步形成类囊体结构。蛋白质免疫实验表明，突变体中多数光合作用蛋白质复合物的组分缺失。该基因的突变影响了质体转录，翻译和光合作用相关的基因的表达。基于这些结果我们推测，AtECB1可能是叶绿体发育过程中所必需的。而AtECB2基因则编码一个PPR家族的叶绿体蛋白质。该蛋白质具有11个PPR基序；此外，该蛋白质含有E/E+和DYW结构域。因而，AtECB2属于PPR家族中的DYW群。AtECB2敲除突变体表现为白化表型，该突变体中的叶绿体没有正常的类囊体结构，仅存在少量的膜结构。与电镜的结果相一致，蛋白质免疫实验表明突变体中多数光合作用蛋白质复合物的组分缺失。定量RT-PCR结果表明，AtECB2的缺失影响了叶绿体基因的表达。另外，我们对该突变体中的已经报道的34个RNA编辑位点分析发现其中的一个位点accD没有发生编辑。AccD编码异质型乙酰辅酶A羧化酶的羧基转移酶β亚基。而前人的实验表明，该位点的RNA编辑为其所编码的蛋白质活性所必需，且accD的缺失直接影响到植物叶绿体的发育。综合这些数据和本论文的结果表明，AtECB2是质体转录本accD的RNA编辑所必需的特异因子；accD RNA编辑的缺陷可能导致了叶绿体发育的缺陷。

拟南芥光系统复合物组装调控因子的功能研究

光系统I与光系统II ( PSI和PSII ) 是由核基因与叶绿体基因共同编码的蛋白组成的多亚基色素蛋白复合体，其复合物组装过程中蛋白以一定地次序合成并组装。现有研究表明光合膜多亚基复合物形成的每一个过程都需要一个或多个调节因子的参与。发现这些调节因子，并研究它们的作用机制将有助于我们认识高等植物两个光系统复合物组装和功能调控的分子机理。因此，我们采用正向遗传学和反向遗传学方法去寻找这些调控因子。我们一方面应用Gateway技术构建拟南芥cDNA表达文库，采用酵母双杂交技术从中筛选与Alb3互作的蛋白，称为ALIP ( Albino3 Interacting Protein )；从ABRC订购编码这些互作蛋白的基因的T-DNA插入突变株系，其中发现了一个影响PSI功能的突变体alip1；另一方面，通过对拟南芥T-DNA插入突变体库进行筛选，发现了一批影响PSII功能的突变体 ( low photosystem II accumulation )，其中包括lpa1、lpa2和lpa66-1。本实验对alip1和lpa66-1突变体进行了深入研究，初步探讨了这两个基因编码的蛋白参与调控PSI以及PSII的组装机理。 突变体lpa66-1是一个高叶绿素荧光突变体，与野生型比较生长缓慢，叶色黄，叶绿素含量低。叶绿素荧光慢诱导曲线显示它是一个影响PSII功能的突变体。类囊体膜蛋白的免疫印迹发现lpa66-1突变体中PSII复合物的累积量降低到野生型的30%左右，其他复合物的含量变化不大。体内蛋白标记实验显示，PSII反应中心蛋白D1，D2的合成速率下降，PSII核心蛋白的周转加快。新合成的蛋白组装进PSII的效率比野生型显著降低。LPA66是一个定位于叶绿体的PPR蛋白。因为野生型拟南芥LPA66蛋白能够特异性的编辑psbF转录本，故野生型psbF转录本中第77C被编辑为77U，从而使相应的氨基酸序列中第26个氨基酸丝氨酸被编辑为苯丙氨酸，而lpa66-1突变体中，LPA66蛋白的缺失导致该位点不能被编辑，PSII复合体也不能有效组装。 Alb3/Oxa1p/YidC蛋白家族广泛的参与蛋白质转运和多亚基复合物组装，采用分裂泛素化酵母双杂交发现与Alb3相互作用蛋白ALIP1。突变体alip1也是一个高叶绿素荧光突变体，叶色黄，在土里生长极为缓慢，且不能开花，不育。叶绿素荧光慢诱导曲线显示，突变体中PSII功能基本没有受影响；而P700显示alip1是一个影响PSI功能的突变体。类囊体膜蛋白的免疫印迹发现突变体中PSI核心蛋白PsaA/B的累积量为野生型的40%左右，而PSII及其他复合物的含量无明显变化。Northern印迹结果显示PsaA/B在转录水平不受影响，而体内蛋白标记实验显示，PSI反应中心蛋白PsaA/B的合成速度下降。蔗糖密度梯度离心分析类囊体膜蛋白的组分显示ALIP1能够与Alb3共迁移。而Alb3对于类囊体膜上大分子复合体的组装有重要作用，我们推测，ALIP1可能与Alb3形成一个复合物，或者作为一个中间体介导Alb3参与PSI的组装。

Enhanced crystallization of the gamma-form of propylene-ethylene copolymer in its miscible blends with propylene homopolymer

BACKGROUND: How to promote the formation of the gamma-form in a certain propylene-ethylene copolymer (PPR) under atmospheric conditions is significant for theoretical considerations and practical applications. Taking the epitaxial relationship between the alpha-form and gamma-form into account, it is expected that incorporation of some extrinsic alpha-crystals, developed by propylene homopolymer (PPH), can enhance the crystallization of the gamma-form of the PPR component in PPR/PPH blends.RESULTS: The PPH component in the blends first crystallizes from the melt, and its melting point and crystal growth rate decrease with increasing PPR fraction. On the other hand, first-formed alpha-crystals of the PPH component can induce the lateral growth of PPR chains on themselves, indicated by sheaf-like crystal morphology and positive birefringence, which is in turn responsible for enhanced crystallization of the gamma-form of the PPR component.

无规共聚聚丙烯的热膨胀系数和等温压缩系数的测定

利用PVT 10 0分析仪对 4种不同牌号的无规共聚聚丙烯的压力 体积 温度特性进行了测定。通过定义法和Tait方程法得出PPR的热膨胀系数 (α)随温度以及等温压缩系数 (β)随压力的变化关系。发现 2种计算方法的结果在高于结晶温度时 ,互相吻合较好。比较了 4种样品的热膨胀系数、等温压缩系数和结晶温度 ,结果表明 ,在 2 0～ 30MPa或 80～ 10 0MPa范围内 ,齐鲁PPR(QLPPR)的等温压缩系数低于其它牌号的样品 ,它在不同压力下的结晶温度也低于其它牌号的样品。

Digital Methods for Process Development in Manufacturing and Their Relevance to Value Driven Design

This paper examines the applicability of a digital manufacturing framework to the implementation of a Value Driven Design (VDD) approach for the development of a stiffened composite panel. It presents a means by which environmental considerations can be integrated with conventional product and process design drivers within a customized, digital environment. A composite forming process is used as an exemplar for the work which creates a collaborative environment for the integration of more traditional design drivers with parameters related to manufacturability as well as more sustainable processes and products. The environmental stakeholder is introduced to the VDD process through a customized product/process/resource (PPR) environment where application specific power consumption and material waste data has been measured and characterised in the process design interface. This allows the manufacturing planner to consider power consumption as a concurrent design driver and the inclusion of energy as a parameter in a VDD approach to the development of efficiently manufactured, sustainable transport systems.