Adhesion and wear behaviour of NCD coatings on Si3N4 by micro-abrasion tests

Nanocrystalline diamond (NCD) coatings offer an excellent alternative for tribological applications, preserving most of the intrinsic mechanical properties of polycrystalline CVD diamond and adding to it an extreme surface smoothness. Silicon nitride (Si3N4) ceramics are reported to guarantee high adhesion levels to CVD microcrystalline diamond coatings, but the NCD adhesion to Si3N4 is not yet well established. Micro-abrasion tests are appropriate for evaluating the abrasive wear resistance of a given surface, but they also provide information on thin film/substrate interfacial resistance, i.e., film adhesion. In this study, a comparison is made between the behaviour of NCD films deposited by hot-filament chemical vapour deposition (HFCVD) and microwave plasma assisted chemical vapour deposition (MPCVD) techniques. Silicon nitride (Si3N4) ceramic discs were selected as substrates. The NCD depositions by HFCVD and MPCVD were carried out using H2–CH4 and H2–CH4–N2 gas mixtures, respectively. An adequate set of growth parameters was chosen for each CVD technique, resulting in NCD films having a final thickness of 5 m. A micro-abrasion tribometer was used, with 3 m diamond grit as the abrasive slurry element. Experiments were carried out at a constant rotational speed (80 r.p.m.) and by varying the applied load in the range of 0.25–0.75 N. The wear rate for MPCVD NCD (3.7±0.8 × 10−5 m3N−1m−1) is compatible with those reported for microcrystalline CVD diamond. The HFCVD films displayed poorer adhesion to the Si3N4 ceramic substrates than the MPCVD ones. However, the HFCVD films show better wear resistance as a result of their higher crystallinity according to the UV Raman data, despite evidencing premature adhesion failure.

Lessons learned from developing a national NCD programme in low- and middle-income countries (Seychelles)

This paper identifies selected issues and lessons learned from the implementation of a national program of prevention and control of non-communicable diseases (NCD) during the past 20 years in the Seychelles, a small island state in the African region. As early as in 1989, population-based surveys demonstrated high levels of several cardiovascular risk factors, which prompted an organized response by the government. The early creation of a NCD unit within the Ministry of Health, coupled with cooperation with international partners, enabled incremental capacity building and coherent development of NCD programs and policy. Information campaigns and screening for hypertension and diabetes in work/public places raised awareness and rallied increasingly broad awareness and support to NCD prevention and control. A variety of interventions were organized for tobacco control and comprehensive tobacco control legislation was enacted in 2009 (including total bans on tobacco advertising and on smoking in all enclosed public and work places). A recent School Nutrition Policy prohibits the sale of soft drinks in schools. At primary health care level, guidelines were developed for the management of hypertension and diabetes (these conditions are managed in all health centers within a national health system); regular interactive education sessions were organized for groups of high risk patients ("heart health club"); and specialized "NCD nurses" were trained. Decreasing prevalence of smoking is evidence of success, but the raising "diabesity epidemic" calls for strengthened health care to high-risk patients and broader multisectoral policy to mould an environment conducive to healthy behaviors. Key components of NCD prevention and control in Seychelles include effective surveillance mechanisms supplemented by focused research; generating broad interest and consensus on the need for prevention and control of NCD; mobilizing leadership and commitment at all levels; involving local and international expertise; building on existing efforts; and seeking integrated, multi-disciplinary and multisectoral approaches.

Traditional local medicines in the republic of Palau and non-communicable diseases (NCD), signs of effectiveness.

ETHNOPHARMACOLOGICAL RELEVANCE: The aim of this survey was to describe which traditional medicines (TM) are most commonly used for non-communicable diseases (NCD - diabetes, hypertension related to excess weight and obesity) in Pacific islands and with what perceived effectiveness. NCD, especially prevalent in the Pacific, have been subject to many public health interventions, often with rather disappointing results. Innovative interventions are required; one hypothesis is that some local, traditional approaches may have been overlooked. MATERIALS AND METHODS: The method used was a retrospective treatment-outcome study in a nation-wide representative sample of the adult population (about 15,000 individuals) of the Republic of Palau, an archipelago of Micronesia. RESULTS: From 188 respondents (61% female, age 16-87, median 48,), 30 different plants were used, mostly self-prepared (69%), or from a traditional healer (18%). For excess weight, when comparing the two most frequent plants, Morinda citrifolia L. was associated with more adequate outcome than Phaleria nishidae Kaneh. (P=0.05). In case of diabetes, when comparing Phaleria nishidae (=Phaleria nisidai) and Morinda citrifolia, the former was statistically more often associated with the reported outcome "lower blood sugar" (P=0.01). CONCLUSIONS: Statistical association between a plant used and reported outcome is not a proof of effectiveness or safety, but it can help select plants of interest for further studies, e.g. through a reverse pharmacology process, in search of local products which may have a positive impact on population health.

TEM study of the AlN grain orientation grown on NCD diamond substrate

Piezoelectric AlN layer grain orientation, grown by room temperature reactive sputtering, is analyzed by transmission electron microscopy (TEM).Two types of samples are studied: (i) AlN grown on well-polished NCD (nano-crystalline diamond) diamond, (ii) AlN grown on an up-side down NCD layer previously grown on a Si substrate, i.e. diamond surface as smooth as that of Si substrates. The second set of sample show a faster lignment of their AlN grain caxis attributed to it smoother diamond free surface. No grain orientation relationship between diamond substrate grain and the AlN ones is evidenced, which seems to indicate the preponderance role of the surface substrate state.

Congruent Docking of Dimeric Kinesin and ncd into Three-dimensional Electron Cryomicroscopy Maps of Microtubule–Motor ADP Complexes

We present a new map showing dimeric kinesin bound to microtubules in the presence of ADP that was obtained by electron cryomicroscopy and image reconstruction. The directly bound monomer (first head) shows a different conformation from one in the more tightly bound empty state. This change in the first head is amplified as a movement of the second (tethered) head, which tilts upward. The atomic coordinates of kinesin·ADP dock into our map so that the tethered head associates with the bound head as in the kinesin dimer structure seen by x-ray crystallography. The new docking orientation avoids problems associated with previous predictions; it puts residues implicated by proteolysis-protection and mutagenesis studies near the microtubule but does not lead to steric interference between the coiled-coil tail and the microtubule surface. The observed conformational changes in the tightly bound states would probably bring some important residues closer to tubulin. As expected from the homology with kinesin, the atomic coordinates of nonclaret disjunctional protein (ncd)·ADP dock in the same orientation into the attached head in a map of microtubules decorated with dimeric ncd·ADP. Our results support the idea that the observed direct interaction between the two heads is important at some stages of the mechanism by which kinesin moves processively along microtubules.

Three-dimensional cryoelectron microscopy of dimeric kinesin and ncd motor domains on microtubules.

Kinesin and ncd motor proteins are homologous in sequence yet move in opposite directions along microtubules. We have previously shown that monomeric kinesin and ncd bind in the same orientation on equivalent sites relative to the ends of tubulin sheets of known polarity. We now report cryoelectron microscope images of 16-protofilament microtubules decorated with both single- and double-headed kinesin and double-headed ncd. Three-dimensional density maps and difference maps show that, in adenosine 5'-[beta,gamma-imido]triphosphate, both dimeric motors bind tightly to microtubules via one head, leaving the other free, though apparently in a fixed position. The attached heads of dimers bind to tubulin in the same way as single kinesin heads. The second heads are connected to the tops of the first but, whereas the second kinesin head is closely associated with the first, pairs of ncd heads are splayed apart. There is also a distinct difference in orientation: the second kinesin head is tilted toward the microtubule plus end, while the second head of ncd points toward the minus end.

ncd and kinesin motor domains interact with both alpha- and beta-tubulin.

Motor domains of the Drosophila minus-end-directed microtubule (MT) motor protein ncd, were found to saturate microtubule binding sites at a stoichiometry of approximately one motor domain per tubulin dimer. To determine the tubulin subunit(s) involved in binding to ncd, mixtures of ncd motor domain and MTs were treated with the zero-length cross-linker 1-ethyl-3-(3-dimethylaminopropyl-carbodiimide) (EDC). EDC treatment generated covalently cross-linked products of ncd and alpha-tubulin and of ncd and beta-tubulin, indicating that the ncd motor domain interacts with both alpha- and beta-tubulin. When the Drosophila kinesin motor domain protein was substituted for the ncd motor domain, cross-linked products of kinesin and alpha-tubulin and of kinesin and beta-tubulin were produced. EDC treatment of mixtures of ncd motor domain and unassembled tubulin dimers or of kinesin motor domain and unassembled tubulin dimers produced the same motor-tubulin products generated in the presence of MTs. These results indicate that kinesin family motors of opposite polarity interact with both tubulin monomers and support a model in which some portion of each protein's motor domain overlaps adjacent alpha- and beta-tubulin subunits.

Health in Brazil 4 Chronic non-communicable diseases in Brazil: burden and current challenges

Non-communicable diseases (NCDs) have become a major health priority in Brazil-72% of all deaths were attributable to NCDs in 2007. They are also the main source of disease burden, with neuropsychiatric disorders being the single largest contributor. Morbidity and mortality due to NCDs are greatest in the poor population. Although the crude NCD mortality increased 5% between 1996 and 2007, age-standardised mortality declined by 20%. Declines were primarily for cardiovascular and chronic respiratory diseases, in association with the successful implementation of health policies that lead to decreases in smoking and the expansion of access to primary health care. Of note, however, the prevalence of diabetes and hypertension is rising in parallel with that of excess weight; these increases are associated with unfavourable changes of diet and physical activity. Brazil has implemented major policies for the prevention of NCDs, and its age-adjusted NCD mortality is falling by 1.8% per year. However, the unfavourable trends for most major risk factors pose an enormous challenge and call for additional and timely action and policies, especially those of a legislative and regulatory nature and those providing cost-effective chronic care for individuals affected by NCDs.

Self-mated tribological systems based on multilayer micro/nanocrystalline CVD diamond coatings

The tribological response of multilayer micro/nanocrystalline diamond coatings grown by the hot filament CVD technique is investigated. These multigrade systems were tailored to comprise a starting microcrystalline diamond (MCD) layer with high adhesion to a silicon nitride (Si3N4) ceramic substrate, and a top nanocrystalline diamond (NCD) layer with reduced surface roughness. Tribological tests were carried out with a reciprocating sliding configuration without lubrication. Such composite coatings exhibit a superior critical load before delamination (130–200 N), when compared to the mono- (60–100 N) and bilayer coatings (110 N), considering ∼10 µm thick films. Regarding the friction behaviour, a short-lived initial high friction coefficient was followed by low friction regimes (friction coefficients between 0.02 and 0.09) as a result of the polished surfaces tailored by the tribological solicitation. Very mild to mild wear regimes (wear coefficient values between 4.1×10−8 and 7.7×10−7 mm3 N−1 m−1) governed the wear performance of the self-mated multilayer coatings when subjected to high-load short-term tests (60–200 N; 2 h; 86 m) and medium-load endurance tests (60 N; 16 h; 691 m).

Take Care4All: Gestor Pessoal para o Bem-Estar na Saúde, Exercício Físico e Alimentação

Este trabalho de Projecto consiste numa plataforma online que possibilita ao seu utilizador gerir simultaneamente a saúde, o exercício físico e o regime alimentar. A plataforma é uma ferramenta que ajuda a promover o bem-estar do indivíduo, porque auxilia a monitorizar a toma de medicação e a agendar consultas e/ou exames. Permite ainda identificar o exercício físico e a dieta adequada para o estado de saúde do utilizador, através do teste de aptidão física e das calculadoras de IMC, TMB e NCD. Para o desenvolvimento da plataforma foram considerados os princípios da usabilidade e acessibilidade heurística de Jacob Nielsen. O desenvolvimento do projecto assenta nas linguagens de Programação de HTML5, CSS3, PHP, MySQL, Javascript (JQuery) e na plataforma de RWD do Twitter-Bootstrap.

Addressing non-communicable diseases in the Seychelles: towards a comprehensive plan of action.

This article reviews the different steps taken during the past 20 years for the prevention and control of non-communicable diseases (NCDs) in the Seychelles. National surveys revealed high levels of several cardiovascular risk factors and prompted an organized response, starting with the creation of an NCD unit in the Ministry of Health. Information campaigns and nationwide activities raised awareness and rallied increasingly broad and high-level support. Significant policy was developed including comprehensive tobacco legislation and a School Nutrition Policy that bans soft drinks in schools. NCD guidelines were developed and specialized 'NCD nurses' were trained to complement doctors in district health centers. Decreasing smoking prevalence is evidence of success, but the raising so-called diabesity epidemic calls for an integrated multi-sector policy to mould an environment conducive to healthy behaviors. Essential components of these efforts include: effective surveillance mechanisms supplemented by focused research; generating broad interest and consensus; mobilizing leadership and commitment at all levels; involving local and international expertise; building on existing efforts; and seeking integrated, multi-disciplinary and multi-sector approaches.

Deaths rates in public hospitals of eastern cape province of South Africa.

BACKGROUND: South Africa (SA) is experiencing a rapid epidemiologic transition as a consequence of political, economic and social changes. In this study we described, based on hospital data, the mortality patterns of Non communicable Diseases (NCD), Communicable Diseases (CD), the NCD/CD ratios, and the trends of deaths. METHODS: We conducted a cross-sectional survey of all deaths occurring in several public hospitals in the Eastern Cape Province of SA between 2002 and 2006. Causes of deaths were coded according to the ICD 10 Edition. RESULTS: A total of 107380 admissions responded to the inclusion criteria between 2002 and 2006. The crude death rate was 4.3% (n=4566) with a mean age of 46±21 years and a sex ratio of 3.1 men (n=3453): 1 woman (n=1113). Out of all deaths, there were 62.9% NCD (n=2872) vs. 37.1% CD (n=1694) with NCD/CD ratio of 1.7. The ratio NCD/CD deaths in men was 1.3 (n=1951/1502) vs. NCD/CD deaths in women of 1.9 (n=735/378). The peak of deaths was observed in winter season. The majority of NCD deaths were at age of 30-64 years, whereas the highest rate of CD deaths was at age< 30 years. The trend of deaths including the majority of NCD, increased from 2002 to 2006. There was a tendency of increase in tuberculosis deaths, but a tendency of decrease in HIV/AIDS deaths was from 2002 to 2006. CONCLUSION: Non-communicable diseases are the leading causes of deaths in rural Eastern Cape province of SA facing Post-epidemiologic transition stages. We recommend overarching priority actions for the response to the Non-communicable Diseases: policy change, prevention, treatment, international cooperation, research, monitoring, accountability, and re-orientation of health systems.

Country actions to meet UN commitments on non-communicable diseases: a stepwise approach.

Strong leadership from heads of state is needed to meet national commitments to the UN political declaration on non-communicable diseases (NCDs) and to achieve the goal of a 25% reduction in premature NCD mortality by 2025 (the 25 by 25 goal). A simple, phased, national response to the political declaration is suggested, with three key steps: planning, implementation, and accountability. Planning entails mobilisation of a multisectoral response to develop and support the national action plan, and to build human, financial, and regulatory capacity for change. Implementation of a few priority and feasible cost-effective interventions for the prevention and treatment of NCDs will achieve the 25 by 25 goal and will need only few additional financial resources. Accountability incorporates three dimensions: monitoring of progress, reviewing of progress, and appropriate responses to accelerate progress. A national NCD commission or equivalent, which is independent of government, is needed to ensure that all relevant stakeholders are held accountable for the UN commitments to NCDs.

Planning and control of internal development projects in a fast changing environment: Case study

Tutkimuksen tarkoituksena on kuvata ja ymmärtää kuinka sisäisiä kehityshankkeita voidaan hallita onnistuneesti kun toimitaan nopeasti muuttuvassa ympäristössä. Tutkimus kuvailee etenkin projekteille tärkeitä menestymistekijöitä, kuten suunnittelu, kontrollointi ja päätöksenteko. Tutkimus selvittää yleisimmät ongelma-alueet case-organisaation sisäisten kehityshankkeiden hallinnassa. Tutkimus on luonteeltaan laadullinen tutkimus, jossa tutkimusmenetelmänä on käytetty tapaustutkimusta. Empiirisessa osassa käsittellään case-organisaation sisäisiä informaatioteknologia-hankkeita (IT) ja uusien konseptien kehityshankkeita (NCD). iSisäisten kehityshankkeiden erilaisuuden ymmärtäminen oli tutkimuksen tärkein tulos. Tutkimuksen empiirinen osio osoitti sen, että epävarmuudella on erittäin suuri vaikutus projektihallintaan sekä projektin kontrollointiin. Case-organisaation IT-projektien onnistuminen riippuu organisaatiomuu-toksen onnistumisesta. Asiakkaisiin ja markkinoihin liittyvät epävarmuudet ovat vaikuttavimmat NCD projektien epävarmuuksista. Näillä epävarmuuk-sil­la on vaikutusta projektihallintaan jonka myötä NCD projektit juuttuvat useim­mi­ten noidankehiin tai ne lopetetaan jo aikaisessa vaiheessa.