Composition, functional properties and sensory characteristics of Mozzarella cheese manufactured from different somatic cell counts in milk

In the present study, composition, functional properties and sensory characteristics of Mozzarella cheese produced from milk with somatic cell counts (SCC) at low (<200,000 cells/mL), intermediate (≈400,000 cells/mL) and high (>800,000 cells/mL) levels were investigated. Three batches of cheese were produced for each SCC category. The cheeses were vacuum packed in plastic bags and analysed after 2, 9, 16, 23 and 30 days of storage at 4ºC. SCC level did not affect the moisture, fat, total protein and ash content, mesophilic and psychrotrophic bacteria, and sensory parameters of Mozzarella cheese. However, meltability increased in cheese manufactured from high SCC milk. Results indicated that raw milk used to produce Mozzarella cheese should not contain high SCC (>800,000 cells/mL) in order to avoid changes in the functional properties of the Mozzarella cheese.

Partial purification and characterization of a bacteriocin produced by Enterococcus faecium 130 isolated from mozzarella cheese

Lactic acid bacteria are important in foods as potential probiotics and also due to the ability to produce antimicrobial compounds that can contribute for biopreservation. In this work, the bacteriocin produced by the food isolate Enterococcus faecium 130 was partially purified and characterized. The compound was active against Gram-positive bacteria, including Listeria monocytogenes. It was produced after 4 days of storage at a broad temperature range (4 to 37 °C); it was stable at pH ranging from 2 to 10 with no loss of activity after heating at 100 °C for 15 minutes. Bacteriocin was partially purified by the adsorption-desorption technique, and the analysis by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) showed a molecular mass of 3.5 to 6.5 kDa. These data encourage studies on application of this bacteriocin in food systems as an additional hurdle to microbial growth.

Genetic parameters estimate for milk and mozzarella cheese yield, fat and protein percentage in dairy buffaloes in Brazil

The aim of this study was analyze the (co)variance components and genetic and phenotypic relationships in the following traits: accumulated milk yield at 270 days (MY270,), observed until 305 days of lactation; accumulated milk yield at 270 days (MY270/A) and at 305 days (MY305), observed until 335 days of lactation; mozzarella cheese yield (MCY) and fat (FP) and protein (PP) percentage, observed until 335 days of lactation. The (co)variance components were estimated by Restricted Maximum Likelihood methodology in analyses single, two and three-traits using animal models. Heritability estimated for MY270, MY270/A, MY305, MCY, FP and PP were 0.22; 0.24, 0.25, 0.14, 0.29 and 0.40 respectively. The genetic correlations between MCY and the variables MY270, MY270/A, MY305, PP and FP was: 0.85; 1.00; 0.89; 0.14 and 0.06, respectively. This way, the selection for the production of milk in long period should increase MCY. However, in the search of animals that produce milk with quality, the genetic parameters suggest that another index should be composed allying these studied traits.

β-casein gene polymorphism permits identification of bovine milk mixed with bubaline milk in mozzarella cheese

Mozzarella cheese is traditionally prepared from bubaline (Bubalus bubalis) milk, but product adulteration occurs mainly by addition of or full substitution by bovine milk. The aim of this study was to show the usefulnes of molecular markers to identify the admixture of bovine milk to bubaline milk during the manufacturing process of mozzarella cheese. Samples of mozzarella cheese were produced by adding seven different concentrations of bovine milk: 0%, 1%, 2%, 5%, 8%, 12% and 100%. DNA extracted from somatic cells found in cheese were submitted to PCR-RFLP analysis of casein genes: α-s1-CN - CSN1S1 that encompasses 954 bp from exon VII to intron IX (AluI and HinfI), β-CN - CSN2 including 495 bp of exon VII (Hae III and HinfI), and κ-CN - CSN3, encompassing 373 bp of exon IV (AluI and HindIII). Our results indicate that Hae III-RFLP of CSN2exon VII can be used as a molecular marker to detect the presence of bovine milk in mozzarella cheese. Copyright © 2008, Sociedade Brasileira de Genética.

Leuconostoc mesenteroides SJRP55: a potential probiotic strain isolated from Brazilian water buffalo mozzarella cheese

The probiotic potential of Leuconostoc mesenteroides subsp. mesenteroides SJRP55 isolated from water buffalo mozzarella cheese was evaluated. The microorganism presented resistance to stressful conditions that simulated the gastrointestinal tract, and to the best of our knowledge Leuconostoc mesenteroides SJRP55 was the first of this species with the ability to deconjugate bile salts. Tolerance to NaCl was temperature dependent, as well the results obtained by aggregation capacity. The strain presented good adhesion properties, β galactosidase activity, viability in fermented milk during storage, non-active against Streptococcus thermophilus and sensible to most of the tested antibiotics. Some analgesic medications inhibited the growth of the strain. Leuconostoc mesenteroides SJRP55 exhibited in vitro probiotic potential, and it can be better characterized through future in vivo tests. This bacterium presents higher functional properties compared to other studied strains, and therefore it is a potential candidate for the application as a probiotic strain, which could be used by industries in the manufacture of functional milk-based products.

Probiotic properties of lactic acid bacteria isolated from water-buffalo mozzarella cheese

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Leuconostoc mesenteroides SJRP55: a bacteriocinogenic strain isolated from Brazilian water buffalo mozzarella cheese

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Diversity of Lactic Acid Bacteria Isolated from Brazilian Water Buffalo Mozzarella Cheese

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

On the implementation of good manufacturing practices in a small processing unity of mozzarella cheese in Brazil

This study reports the implementation of GMPs in a mozzarella cheese processing plant. The mozzarella cheese manufacturing unit is located in the Southwestern region of the state of Parana, Brazil, and processes 20,000 L of milk daily. The implementation of GMP took place with the creation of a multi-disciplinary team and it was carried out in four steps: diagnosis, report of the diagnosis and road map, corrective measures and follow-up of GMP implementation. The effectiveness of actions taken and GMP implementation was compared by the total percentages of non-conformities and conformities before and after implementation of GMR Microbiological indicators were also used to assess the implementation of GMP in the mozzarella cheese processing facility. Results showed that the average percentage of conformity after the implementation of GMP was significant increased to 66%, while before it was 32% (p < 0.05). The populations of aerobic microorganisms and total coliforms in equipment were significantly reduced (p < 0.05) after the implementation of GMP, as well as the populations of total coliforms in the hands of food handlers (p < 0.05). In conclusion, GMP implementation changed the overall organization of the cheese processing unity, as well as managers and food handlers' behavior and knowledge on the quality and safety of products manufactured. (C) 2011 Elsevier Ltd. All rights reserved.

Understanding the impact of different cheese-making strategies on Mozzarella cheese properties

Le fromage Mozzarella entre dans la composition de plusieurs mets populaires d’Amérique du Nord. L’aptitude de ce fromage à être râpé et ses propriétés caractéristiques de cuisson en font un ingrédient idéal. Ces qualités sont attribuées principalement aux propriétés physiques particulières de ce fromage sous certaines conditions de cisaillement et de température. Le but de ce projet était d’évaluer l’impact de différentes stratégies couramment mises en oeuvre dans l’industrie fromagère sur la composition, la microstructure et les propriétés physiques du fromage. Diverses stratégies ont été étudiées : les conditions de filage du caillé lors du procédé de « pasta filata », l’addition de protéines sériques dénaturées, le contrôle de la minéralisation et le vieillissement du fromage. Les résultats ont démontré que le contrôle de l’intensité mécanique et thermique fournie lors du filage permettait respectivement de réduire les pertes de solides et d’améliorer la répartition de la phase aqueuse dans la matrice fromagère. L’aptitude au râpage du fromage peut être optimisée en combinant l’utilisation de plusieurs stratégies dont la réduction du calcium colloïdal, un temps de vieillissement adéquat et un râpage à basse température. Par ailleurs, des changements aux facteurs mentionnés précédemment sont apportés lors de l’ajout de protéines sériques dénaturées, ces dernières ayant un impact sur la composition et la structure du fromage. Des modèles prédictifs de l’aptitude au râpage ont été développés en sélectionnant uniquement les descripteurs de composition et de texture pertinents. La perception sensorielle du fromage cuit sur pizza et les propriétés physiques du fromage fondu ont été considérablement influencées par l’évolution physico-chimique du fromage au cours du vieillissement. L’utilisation d’une nouvelle approche pour la caractérisation des propriétés rhéologiques du fromage fondu sous fortes contraintes a permis d’établir de bonnes relations avec les descripteurs sensoriels de texture. Ce travail a permis de valider l’hypothèse que l’utilisation d’une ou plusieurs stratégies simples et accessibles pouvait être mise de l’avant afin d’optimiser les propriétés physiques du fromage Mozzarella. Cela contribue à une meilleure compréhension des facteurs pouvant être contrôlés afin de développer des fromages avec des attributs spécifiques, lorsqu’utilisés comme ingrédient.

Effects of gelation temperature on the mozzarella-type curd made from buffalo and cows’ milk: 2. curd yield, overall quality & casein fractions

Buffalo curd gave higher amount of yield than cows’ curd at similar processing conditions. Curd moisture was decreased with the increase of gelation temperatures in both types of milk. Curd cutting time of 45 minutes was found optimum for Mozzarella cheese making from both milk samples. Centrifugation method is simpler, quicker and more reproducible than Buchner funnel method. Buffalo milk contains higher amounts of αs1- , β- and к-casein as compared to cows’ milk.

Genetic parameter estimates for buffalo milk yield, milk quality and mozzarella production and Bayesian inference analysis of their relationships

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Composição bromatológica do soro de leite bovino proveniente do processo de fabricação do queijo Mozarela.

Resumo: Objetivou-se avaliar a composição bromatológica do soro de leite bovino derivado da fabricação do queijo mozarela. Foram coletadas três amostras de 500 mL diretamente do tanque de uma fábrica de beneficiamento de queijo tipo mozarela na cidade de Damolândia em Goiás. Foram realizadas análises de matéria seca, umidade, matéria orgânica, cinzas e proteína bruta. O resultado para proteína bruta foi baixo, porém o tipo processamento usado na produção do queijo pode ter influenciado nesse resultado. [Chemical composition of bovine whey derived of processing of mozzarella cheese]. Abstract: The aim of experiment was to evaluate the Chemical composition of bovine whey derived of processing of mozzarella cheese. Three samples of 500 mL were collected in tank of a factory's processing of mozzarella cheese localized on Damolândia city, Goias. The analisys dry matter, moisture, organic matter, ash and crude protein were realized. Low results of crude protein was observed, however the kind of processing of cheese can influenced in this result.

Biossíntese de goma xantana a partir da fermentação de soro de leite: rendimento e viscosidade

Xanthan is a polysaccharide synthesized by Xanthomonas bacteria and of extreme commercial importance as a microbial polysaccharide. The aim of this work was to produce xanthan using mozzarella cheese whey as substrate, by different isolates natives the Xanthomonas. The alternative medium for production was milk whey, urea and K2HPO4. The xanthan maximum productivity was 21.91 g L-1. Analysis of apparent viscosity was made in solutions of gum at 0.5-2.0%, 25-65 ºC with shear rate of 25-1000 s-1.The maximum viscosity found was 57.30 mPa.s. The isolates demonstrate capacity to degrade the lactose and to produce xanthan, being constituted an alternative for the industrial production.