Sistema para monitoramento e análise de paisagens acústicas submarinas.

O Monitoramento Acústico Passivo (PAM) submarino refere-se ao uso de sistemas de escuta e gravação subaquática, com o intuito de detectar, monitorar e identificar fontes sonoras através das ondas de pressão que elas produzem. Se diz que é passivo já que tais sistemas unicamente ouvem, sem perturbam o meio ambiente acústico existente, diferentemente de ativos, como os sonares. O PAM submarino tem diversas áreas de aplicação, como em sistemas de vigilância militar, seguridade portuária, monitoramento ambiental, desenvolvimento de índices de densidade populacional de espécies, identificação de espécies, etc. Tecnologia nacional nesta área é praticamente inexistente apesar da sua importância. Neste contexto, o presente trabalho visa contribuir com o desenvolvimento de tecnologia nacional no tema através da concepção, construção e operação de equipamento autônomo de PAM e de métodos de processamento de sinais para detecção automatizada de eventos acústicos submarinos. Foi desenvolvido um equipamento, nomeado OceanPod, que possui características como baixo custo de fabrica¸c~ao, flexibilidade e facilidade de configuração e uso, voltado para a pesquisa científica, industrial e para controle ambiental. Vários protótipos desse equipamento foram construídos e utilizados em missões no mar. Essas jornadas de monitoramento permitiram iniciar a criação de um banco de dados acústico, o qual permitiu fornecer a matéria prima para o teste de detectores de eventos acústicos automatizados e em tempo real. Adicionalmente também é proposto um novo método de detecção-identificação de eventos acústicos, baseado em análise estatística da representação tempo-frequência dos sinais acústicos. Este novo método foi testado na detecção de cetáceos, presentes no banco de dados gerado pelas missões de monitoramento.

Monitoramento atmosférico passivo de SO2, NO2 e O3 em áreas urbanas e de influência industrial como prática de química ambiental para alunos de graduação

This study is a result of undergraduate student participation in the Environmental Chemistry discipline provided by the Chemistry Institute/UFBA. The students were involved in the development of passive samplers, a project of the LAQUAM (Environmental Analytical Chemistry Laboratory). The students' residences and other neighborhoods were used to create a passive sampling network, allowing the measurement of atmospheric levels of pollutants in urban areas and in those under industrial influence. The assembly of the passive samplers, including impregnation of filters and chemical analysis were part of the students' practice tasks. The results were analyzed taking into consideration the Brazilian legislation.

When wolves cry: long distance calling by wild maned wolves

The maned wolf (Chrysocyon brachyurus Illiger 1815) is the biggest canid in South America and it is considered a “near threatened” species by IUCN. Because of its nocturnal, territorial and solitary habits, there are still many understudied aspects of their behavior in natural environments, including acoustic communication. In its vocal repertoire, the wolf presents a longdistance call named “roar-bark” which, according to literature, functions for spacing maintenance between individuals and/or communication between members of the reproductive pair inside the territory. In this context, this study aimed: 1) to compare four methods for detecting maned wolf’s roar-barks in recordings made in a natural environment, in order to elect the most efficient one for our project; 2) to understand the night emission pattern of these vocalizations, verifying possible weather and moon phases influences in roarbark’s emission rates; and 3) to test Passive Acoustic Monitoring as a tool to identify the presence of maned wolves in a natural environment. The study area was the Serra da Canastra National Park (Minas Gerais, Brazil), where autonomous recorders were used for sound acquisition, recording all night (from 06pm to 06am) during five days in December/2013 and every day from April to July/2014. Roar-barks’ detection methods were tested and compared regarding time needed to analyze files, number of false positives and number of correctly identified calls. The mixed method (XBAT + manual) was the most efficient one, finding 100% of vocalizations in almost half of the time the manual method did, being chosen for our data analysis. By studying roarbarks’ temporal variation we verified that the wolves vocalize more in the early hours of the evening, suggesting an important social function for those calls at the beginning of its period of most intense activity. Average wind speed negatively influenced vocalization rate, which may indicate lower sound reception of recorders or a change in behavioral patterns of wolves in high speed wind conditions. A better understanding of seasonal variation of maned wolves’ vocal activity is required, but our study already shows that it is possible to detect behavioral patterns of wild animals only by sound, validating PAM as a tool in this species’ conservation.

Atividade de morcegos insetívoros (mammalia, chiroptera) no pampa brasileiro: uso de hábitat e sazonalidade

Bats correspond to 20% of the extant mammal species and, with a few exceptions, use echolocation, a spacial orientation system based on emission and analysis of echoes from sound waves, generally ultrasounds. Echolocation was discovered in the 1940 s and since the 1970 s ultrasound detectors have been commercially available, allowing the investigation of several aspects of the natural history and ecology of bats. Passive acoustic monitoring has been frequently used in habitat use studies, predominantly in North America and Europe, by comparing the number of bat passes between different habitat types. This dissertation presents the first evaluation of the spacial and seasonal variation patterns in the activity of insectivorous bats in the Brazilian biome Pampa, in the state of Rio Grande do Sul. Since bat activity can vary according to habitat type, time of year and climatic conditions, the following hypotheses were tested: 1. bat activity varies between different types of habitat; 2. bat activity varies seasonally; 3. bat activity is influenced by temperature, humidity and wind speed. The acoustic samples were taken along fixed transects of 1500 meters, which were monitored monthly from April 2009 to March 2010. Five habitat types were sampled: eucalypts, stream, riparian forest, wetland and grassland. In each sample, the number of bat passes was obtained by using an ultrasound detector Pettersson D230. A total of 1183 bat passes were registered. Greater bat activity levels was observed along large eucalypts (1.93 bat passes/3min) and along a stream (1.61 bat passes/3 min). A riparian forest (0.94 bat passes/3 min) and a wetland area (0.61 bat passes/3 min) exhibited statistically equal levels of activity. Bat passes were fewer in grassland areas (0,16 bat passes/3 min). Bat activity was not correlated with abiotic factors. However, bat activity was significantly low in the colder season, winter, and was similar in autumn, spring and summer. The observed preference for vegetation borders and water courses agrees with reports from other countries and is attributed predominantly to the high prey abundance in these types of environments. Additionally, low activity in the winter is probably a response to the reduced availability of insects, and to lower temperatures. Our results indicate which areas of arboreal vegetation and water courses should be priorities for the conservation of bats and that alterations of these habitat types might negatively influence bat activity in the region

Desenvolvimento e aplicação de sistema passivo de coleta de poluentes atmosféricos para monitoramento de Cd, Cr, Pb, Cu, Fe, Mn, Zn e particulados totais

The objective of this study was to assess a new monitoring technique of particulate and trace metals in the atmosphere via the use of a passive sampler of air pollutants in the city of Goiânia. The average particulate weight and average concentrations of metals Fe, Cr, Zn, Pb, Cu, Mn, and Cd were 0.1104 g and 257.5; 23.4; 17.8; 6.7; 1.9; 0.8; 0.2 μg/m²/day, respectively. Higher Pb and Cr concentrations were obtained in areas with intense traffic. This study revealed that it is possible to monitor trace metals with passive sampling, developed at a low cost and operational facility.

Utilização de materiais anti-vibráteis e de isolamento acústico na via férrea

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Vias de Comunicação e Transportes

Metodologia TRIZ aplicada ao desenvolvimento do conforto acústico em aeronaves comerciais

Dissertação para obtenção do Grau de Mestre em Engenharia Mecânica

Qualidade de dados fluviométricos obtidos através de perfilamento acústico

Perfiladores acústicos Doppler de corrente são, na atualidade, a principal opção para medição de vazão e monitoramento hidrodinâmico de cursos d'água, em substituição aos métodos tradicionais. A disseminação desse tipo de equipamento deve-se, principalmente, às suas vantagens operativas, que vão da rapidez de medição até o maior detalhamento e quantidade de informações geradas sobre a hidrodinâmica das seções hidrométricas. Assim como no emprego de métodos e equipamentos tradicionais, o uso de perfiladores acústicos Doppler deve ser pautado pela busca da qualidade dos dados, uma vez que estes são a base para projetos e gestão de obras e sistemas de recursos hídricos. Nesse sentido, o trabalho apresenta uma análise das incertezas de medição de uma campanha hidrométrica realizada no Rio Sapucaí (Piranguinho-MG), utilizando dois perfiladores Doppler distintos: um ADCP Rio Grande 1.200 kHz e um Qmetrix Qliner. Foram realizadas 10 medições consecutivas com cada equipamento, seguindo-se os protocolos de qualidade existentes na literatura e, posteriormente, uma análise de incerteza do Tipo A (ou seja, análise estatística de várias observações independentes das grandezas de entrada sob as mesmas condições). As medições do ADCP e Qliner apresentaram, respectivamente, incertezas-padrão de 0,679% e 0,508% em relação às médias. Tais resultados são satisfatórios e aceitáveis quando comparados a referências da literatura, indicando a validade do uso de perfiladores Doppler para a expansão de redes fluviométricas e geração de dados hidrológicos.

Análise de métodos de predição de conforto térmico de habitação em clima quente-úmido com condicionamento passivo

The assessment of building thermal performance is often carried out using HVAC energy consumption data, when available, or thermal comfort variables measurements, for free-running buildings. Both types of data can be determined by monitoring or computer simulation. The assessment based on thermal comfort variables is the most complex because it depends on the determination of the thermal comfort zone. For these reasons, this master thesis explores methods of building thermal performance assessment using variables of thermal comfort simulated by DesignBuilder software. The main objective is to contribute to the development of methods to support architectural decisions during the design process, and energy and sustainable rating systems. The research method consists on selecting thermal comfort methods, modeling them in electronic sheets with output charts developed to optimize the analyses, which are used to assess the simulation results of low cost house configurations. The house models consist in a base case, which are already built, and changes in thermal transmittance, absorptance, and shading. The simulation results are assessed using each thermal comfort method, to identify the sensitivity of them. The final results show the limitations of the methods, the importance of a method that considers thermal radiance and wind speed, and the contribution of the chart proposed

Monitoramento costeiro das praias de São Bento do Norte e Caiçara do Norte RN: implicações para o pólo petrolífero de Guamaré

This dissertation the results of a research developed in the area of São Bento do Norte and Caiçara do Norte, northern coast of the State of Rio Grande do Norte, during the period of June of 2000 to August of 2001, in the ambit of the projects MAMBMARÉ (CNPq/CTPETRO) and PROBRAL (CAPES/DAAD).The objective principal of this research was the characterization of the sedimentary dynamics of this coast, with base in data of coastal process (winds, currents, waves and tides), with topographical risings (beach profiles and dunes), satellite images and sedimentary analyses. The more specific objectives were accomplished the coastal monitoring of this coast, to verify the maintenance of an erosive tendency or progradacional after the groynes construction for contention of the erosion in the beach of Caiçara do Norte, as well as to verify the influence of the features of bottom of the platform interns adjacent on the pole petroliferous of Guamaré. The executed monitoramento allowed to identify that the movement of the sediments, along the year, in that area, is cyclical, reaching the largest oscillations during the months of winter (deposition) and they will summer (erosion). The sedimentologic studies indicated a general tendency for sands quartzosas, with gravel presence, moderately to good selected, with asymmetry predominantly negative. In agreement with the parameter of Dean (1957), used in the identification of the state morfodinâmico of the beaches, monitored beaches, are basically reflectivas with tendency to middlemen, what frames that space of the coast norteriograndense, as a space strongly vulnerable to erosive processes. The studies developed in the platform, it interns of this area, allowed to visualize for the first time, in large scale, the distribution of the features of the submarine bottom to the batométrico coat of 25 meters. Being pointed out the presence of a high one topographical submerged, with about 5 meters of height, 1 km of width and more than 24 meters of extension, located in the platform it interns in front of São Bento do Norte; coincident with the trend of the system of flaws of Carnaubais. This feature relay an important paper on the control of the sedimentary processes and oceanographic, as well as in the coastal evolution of this area of the RN state, and they affect the area of the pole petroliferous of Guamaré directly. These results contribute to a better knowledge of the processes in the area, and consequently as subsidies implantation of measures of coastal and environmental protection for the cities of São Bento do Norte and Caiçara do Norte, as well as to understand how the geological-sedimentary processes and oceanographic, in this area, are influencing the characteristics geoambientais of the pole petroliferous of Guamaré

Construção e calibração de amostrador passivo para determinação de ozônio troposférico

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise de métodos de predição de conforto térmico de habitação em clima quente-úmido com condicionamento passivo

The assessment of building thermal performance is often carried out using HVAC energy consumption data, when available, or thermal comfort variables measurements, for free-running buildings. Both types of data can be determined by monitoring or computer simulation. The assessment based on thermal comfort variables is the most complex because it depends on the determination of the thermal comfort zone. For these reasons, this master thesis explores methods of building thermal performance assessment using variables of thermal comfort simulated by DesignBuilder software. The main objective is to contribute to the development of methods to support architectural decisions during the design process, and energy and sustainable rating systems. The research method consists on selecting thermal comfort methods, modeling them in electronic sheets with output charts developed to optimize the analyses, which are used to assess the simulation results of low cost house configurations. The house models consist in a base case, which are already built, and changes in thermal transmittance, absorptance, and shading. The simulation results are assessed using each thermal comfort method, to identify the sensitivity of them. The final results show the limitations of the methods, the importance of a method that considers thermal radiance and wind speed, and the contribution of the chart proposed

Avaliação de um sistema de resfriamento passivo para o clima de Curitiba

Direct evaporative cooling systems (DECS) based on sprinkling water indoors in the form of droplets and indirect evaporative cooling systems (IECS), characterized by the use of wetted roof or wall surfaces for cooling without increasing the indoor air moisture, consist of interesting bioclimatic strategies still not quite explored in Brazil. This study aims to evaluate the use of a particular form of IECS (which combines evaporative cooling and thermal mass brought about by a water reservoir) for indoor thermal control in warm conditions in Curitiba, Two test cells were initially built, monitored and compared to each other: a control module (CM) and an experimental module (EM), the latter provided with an evaporative pond. A subsequent configuration of the system which cancels out the evaporative function of the system and that is solely based on the increase of thermal mass, was tested in a second monitoring round. A third configuration of EM combinig evaporative cooling and the increase of termal mass was tested. Results showed a higher effectiveness of the IECS for the indoor cooling of the tested cells. The average temperature in EM was reduced in 2.5°C and the maximum temperature was reduced in 8.0°C in comparison with the CM. Results also showed a strong relation between the wet-bulb temperature depression and the internal temperature decrease achieved by the evaporative cooling strategy.

Análise de métodos de predição de conforto térmico de habitação em clima quente-úmido com condicionamento passivo

The assessment of building thermal performance is often carried out using HVAC energy consumption data, when available, or thermal comfort variables measurements, for free-running buildings. Both types of data can be determined by monitoring or computer simulation. The assessment based on thermal comfort variables is the most complex because it depends on the determination of the thermal comfort zone. For these reasons, this master thesis explores methods of building thermal performance assessment using variables of thermal comfort simulated by DesignBuilder software. The main objective is to contribute to the development of methods to support architectural decisions during the design process, and energy and sustainable rating systems. The research method consists on selecting thermal comfort methods, modeling them in electronic sheets with output charts developed to optimize the analyses, which are used to assess the simulation results of low cost house configurations. The house models consist in a base case, which are already built, and changes in thermal transmittance, absorptance, and shading. The simulation results are assessed using each thermal comfort method, to identify the sensitivity of them. The final results show the limitations of the methods, the importance of a method that considers thermal radiance and wind speed, and the contribution of the chart proposed

Sistema de monitoramento de perdas visíveis de cana-de-açúcar em colhedora de cana picada

In the last few years the sugar-cane mechanical harvested area has increased, especially in regions with appropriated slop. The use of this technology brings some inconveniences, such as, the increase in the percentage of extraneous matter, which causes the reduction of technological quality of the raw material, and losses in the field. Extraneous matter (trash) is composed of tops and leaves in major percentage, plus soil and roots, and eventually some metal parts. In the green cane harvest system the percentage of extraneous matter has a tendency to increase due to the great amount of vegetal matter to be processed. The increase in the blower fan speed to reduce the amount of extraneous matter can lead to an unacceptable economic level of raw material losses. The main objective of this work was, using a cane loss monitor, to evaluate and quantify the amount of visible losses of sugar cane through the primary extractor at two different fan speeds. Afterwards these losses were related to the harvester cleaning efficiency. The piezoelectric transducer shows a reasonable sensibility. The results show that the cleaning efficiency in the primary extractor (85% mean), the cane losses (between 5.68% and 2.15%) and fan speed are interrelated. The total losses and specially splinters (between 3.19% and 0.91%), showed a significant difference among the treatments.