Quantificação de polifosfatos no bacalhau. Validação de um método de análise

O bacalhau (Gadus morhua) faz parte da dieta alimentar dos portugueses há vários séculos, sendo atualmente, um dos maiores consumidores deste peixe a nível mundial. Após o processo de salga, esta espécie possui características únicas como a consistência, cheiro, paladar e cor amarela. É precisamente devido à coloração do peixe que alguns produtores da Islândia, Noruega e Dinamarca requisitaram às autoridades da União Europeia (UE) a aprovação da utilização de polifosfatos no processo de salga húmida do bacalhau. Os polifosfatos são aditivos alimentares bastante usados no processamento do pescado pois previnem a oxidação dos lípidos e proteínas do músculo do bacalhau, evitando assim a indesejada mudança de cor do peixe. Apesar dos esforços da Associação dos Industriais do Bacalhau (AIB) e do governo português para a rejeição da proposta nórdica, tal não se verificou. Deste modo, no início do próximo ano já será possível a venda na UE de bacalhau com fosfatos. A quantificação do teor de fosfatos no bacalhau é geralmente efetuada por Espetrofotometria de absorção molecular no ultravioleta-visível (UV-Visível). Esta quantificação é baseada no método de determinação do fósforo total, através da hidrólise dos fosfatos a ortofosfatos com posterior medição da cor amarela, gerada pela reação destes com uma solução de molibdato-vanadato. O objetivo desta dissertação foi a validação de um método de análise para a quantificação dos polifosfatos no bacalhau. O método validado foi o descrito na norma NP 4495 para produtos de pesca e aquicultura. O desenvolvimento deste trabalho foi realizado em laboratório acreditado para águas e produtos alimentares (Equilibrium - Laboratório de Controlo de Qualidade e de Processos Lda, L0312). Foi ainda determinada a influência do teor de cloreto de sódio na quantificação dos polifosfatos e o teor de humidade, uma vez que este pode afetar o produto durante a sua comercialização. No processo de validação do método foram estudados diversos parâmetros, tais como a seletividade, linearidade, sensibilidade, limite de quantificação e precisão. Pela análise dos resultados obtidos conclui-se que o método para determinação de fosfatos no bacalhau se encontra validado, uma vez que satisfaz todas as especificações determinadas para cada parâmetro de validação avaliado.

Potencial antioxidante, mineral, inibitório de enzimas α-amilase e lipoxigenase e composição centesimal de espécies da família Apiaceae

Eryngium foetidum L., Eryngium cf. campestre and Coriandrum sativum L. are Apiaceae family vegetable appreciated due to its peculiar flavor and consumed mainly in the north and northeast of Brazil. The vegetables are rich in protein, vitamins, fiber, minerals, total phenolics and other essential bioactives for a balanced health. Nevertheless, many vegetables are falling into disuse by the population, instead of processed foods. The rescue consumption of these species is very important, aiming at their nutritional, therapeutic and antioxidant benefits. In this study, was quantified the levels of total phenolic, flavonoids and dihidroflavonoides by molecular absorption spectrophotometry in the ultraviolet. The total antioxidant capacity was also evaluated using five methodologies of in vitro assays: test Total Antioxidant Capacity (TAC), scavenging of DPPH and ABTS radical, Power Reducing and Power Chelating. It was also evaluated the power inhibitor of α-amylase and lipoxygenase extracts. All species showed significant levels of total phenolics, flavonoids and dihidroflavonoides in its composition. All treatments showed antioxidant activity of 50% except the sheets of E. cf. campestre, C. sativum and bracts of E. foetidum in DPPH and bracts of E. foetidum in ABTS. All treatments also exhibited 50% inhibition activity of the enzyme lipoxygenase.In α-amylase only the leaves of E. cf. campestre and C. sativum showed IC50. It was evaluate the phytochemical composition, aiming to meet the nutritional potential of Apiaceae family vegetables, called unconventional: Eryngium foetidum L., Eryngium cf. campestre; and conventional: Coriandrum sativum L. At the centesimal composition analysis Coriandrum sativum L. presented the highest levels of protein. The leaves of Eryngium foetidum L. exhibited higher values than other species in dietary fiber, while Eryngium cf. campestre detach with superior results in lipids. About the analyzed minerals, the leaves of Eryngium cf. campestre expressed results superior to the other in N, Ca, Mg, S and Cu. The amount of iron highlighted in sheets of E. foetidum, whereas P, K, Mn, Zn and B were most significant on leaves of C. sativum. It was concluded that the levels of total phenolic compounds found in these vegetables, characterize them for its high potential in the antioxidant and inhibition of lipoxygenase and α-amylase enzymes. Their protein and mineral levels classify them as species that can be used as a nutritional source in the preparation of other foods and may their regular consumption bring benefit to human health.

Spectrophotometric study of the chromium(III)/azide system in the ultraviolet region and its analytical application

A sensitive and alternative method for the spectrophotometric determination of chromium(III) based on the formation of chromium(III)/azide complexes was established by investigating a new band in the ultraviolet region. The best experimental conditions for the analytical determination of this metallic ion were: ligand and perchloric acid analytical concentration = 493 and 12.0 mmol L-1, respectively; aqueous medium; T = 25.0 ºC; contact time = 1 hour. The maximum molar absorptivity coefficient occurred at 287 nm (average 1.481 ± 0.008 ´ 10(4) L mol-1 cm-1), leading to the determination of metal ion concentrations one hundred times lower than the ones formerly determined in the visible region. The system obeys Beer's Law and is suitable for chromium determination in the 0.702-2.81 mg L-1 concentration range (15-65% T, 1.00 cm-width quartz cells). Analytical applications of the current method were tested with a nutritional supplement containing chromium. Results were compared with those obtained with atomic absorption spectrometry.

Retrieval of trace gases vertical profile in the lower atmosphere combining. Differential Optical Absorption Spectroscopy with radiative transfer models

The motivation for the work presented in this thesis is to retrieve profile information for the atmospheric trace constituents nitrogen dioxide (NO2) and ozone (O3) in the lower troposphere from remote sensing measurements. The remote sensing technique used, referred to as Multiple AXis Differential Optical Absorption Spectroscopy (MAX-DOAS), is a recent technique that represents a significant advance on the well-established DOAS, especially for what it concerns the study of tropospheric trace consituents. NO2 is an important trace gas in the lower troposphere due to the fact that it is involved in the production of tropospheric ozone; ozone and nitrogen dioxide are key factors in determining the quality of air with consequences, for example, on human health and the growth of vegetation. To understand the NO2 and ozone chemistry in more detail not only the concentrations at ground but also the acquisition of the vertical distribution is necessary. In fact, the budget of nitrogen oxides and ozone in the atmosphere is determined both by local emissions and non-local chemical and dynamical processes (i.e. diffusion and transport at various scales) that greatly impact on their vertical and temporal distribution: thus a tool to resolve the vertical profile information is really important. Useful measurement techniques for atmospheric trace species should fulfill at least two main requirements. First, they must be sufficiently sensitive to detect the species under consideration at their ambient concentration levels. Second, they must be specific, which means that the results of the measurement of a particular species must be neither positively nor negatively influenced by any other trace species simultaneously present in the probed volume of air. Air monitoring by spectroscopic techniques has proven to be a very useful tool to fulfill these desirable requirements as well as a number of other important properties. During the last decades, many such instruments have been developed which are based on the absorption properties of the constituents in various regions of the electromagnetic spectrum, ranging from the far infrared to the ultraviolet. Among them, Differential Optical Absorption Spectroscopy (DOAS) has played an important role. DOAS is an established remote sensing technique for atmospheric trace gases probing, which identifies and quantifies the trace gases in the atmosphere taking advantage of their molecular absorption structures in the near UV and visible wavelengths of the electromagnetic spectrum (from 0.25 μm to 0.75 μm). Passive DOAS, in particular, can detect the presence of a trace gas in terms of its integrated concentration over the atmospheric path from the sun to the receiver (the so called slant column density). The receiver can be located at ground, as well as on board an aircraft or a satellite platform. Passive DOAS has, therefore, a flexible measurement configuration that allows multiple applications. The ability to properly interpret passive DOAS measurements of atmospheric constituents depends crucially on how well the optical path of light collected by the system is understood. This is because the final product of DOAS is the concentration of a particular species integrated along the path that radiation covers in the atmosphere. This path is not known a priori and can only be evaluated by Radiative Transfer Models (RTMs). These models are used to calculate the so called vertical column density of a given trace gas, which is obtained by dividing the measured slant column density to the so called air mass factor, which is used to quantify the enhancement of the light path length within the absorber layers. In the case of the standard DOAS set-up, in which radiation is collected along the vertical direction (zenith-sky DOAS), calculations of the air mass factor have been made using “simple” single scattering radiative transfer models. This configuration has its highest sensitivity in the stratosphere, in particular during twilight. This is the result of the large enhancement in stratospheric light path at dawn and dusk combined with a relatively short tropospheric path. In order to increase the sensitivity of the instrument towards tropospheric signals, measurements with the telescope pointing the horizon (offaxis DOAS) have to be performed. In this circumstances, the light path in the lower layers can become very long and necessitate the use of radiative transfer models including multiple scattering, the full treatment of atmospheric sphericity and refraction. In this thesis, a recent development in the well-established DOAS technique is described, referred to as Multiple AXis Differential Optical Absorption Spectroscopy (MAX-DOAS). The MAX-DOAS consists in the simultaneous use of several off-axis directions near the horizon: using this configuration, not only the sensitivity to tropospheric trace gases is greatly improved, but vertical profile information can also be retrieved by combining the simultaneous off-axis measurements with sophisticated RTM calculations and inversion techniques. In particular there is a need for a RTM which is capable of dealing with all the processes intervening along the light path, supporting all DOAS geometries used, and treating multiple scattering events with varying phase functions involved. To achieve these multiple goals a statistical approach based on the Monte Carlo technique should be used. A Monte Carlo RTM generates an ensemble of random photon paths between the light source and the detector, and uses these paths to reconstruct a remote sensing measurement. Within the present study, the Monte Carlo radiative transfer model PROMSAR (PROcessing of Multi-Scattered Atmospheric Radiation) has been developed and used to correctly interpret the slant column densities obtained from MAX-DOAS measurements. In order to derive the vertical concentration profile of a trace gas from its slant column measurement, the AMF is only one part in the quantitative retrieval process. One indispensable requirement is a robust approach to invert the measurements and obtain the unknown concentrations, the air mass factors being known. For this purpose, in the present thesis, we have used the Chahine relaxation method. Ground-based Multiple AXis DOAS, combined with appropriate radiative transfer models and inversion techniques, is a promising tool for atmospheric studies in the lower troposphere and boundary layer, including the retrieval of profile information with a good degree of vertical resolution. This thesis has presented an application of this powerful comprehensive tool for the study of a preserved natural Mediterranean area (the Castel Porziano Estate, located 20 km South-West of Rome) where pollution is transported from remote sources. Application of this tool in densely populated or industrial areas is beginning to look particularly fruitful and represents an important subject for future studies.

Analytical Assessment of a Home Made Capillary Electrophoresis Equipment with Linear Charge Coupled Device for Visible Light Absorption Detection in the Determination of Food Dyes

The performance of modular home made capillary electrophoresis equipment with spectrophotometric detection, at a visible region by means of a miniaturized linear charge coupled device, was evaluated for the determination of four food dyes. This system presents a simple but efficient home made cell detection scheme. A computer program that converts the spectral data after each run into the electropherograms was developed to evaluate the analytical parameters. The dyes selected for analytical evaluation of the system were Brilliant Blue FCF, Fast Green FCF, Sunset Yellow FCF, and Amaranth. Separation was carried out in a 29cm length and 75 mu m I.D fused silica capillary, using 10mmolL-1 borate buffer at pH 9, with separation voltage of 7.5kV. The detection limits for the dyes were between 0.3 and 1.5mgL-1 and the method presented adequate linearity over the ranges studied, with correlation coefficients greater than 0.99. The method was applied for determination and quantification of these dyes in fruit juices and candies.

Determination of chlorine in food samples via the AlCl molecule using high-resolution continuum source molecular absorption spectrometry in a graphite furnace

Determination of chlorine using the molecular absorption of aluminum mono-chloride (AlCl) at the 261.418 nm wavelength was accomplished by high-resolution continuum source molecular absorption spectrometry using a transversely heated graphite tube furnace with an integrated platform. For the analysis. 10 mu L of the sample followed by 10 mu L of a solution containing Al-Ag-Sr modifier, (1 g L-1 each), were directly injected onto the platform. A spectral interference due to the use of Al-Ag-Sr as mixed modifier was easily corrected by the least-squares algorithm present in the spectrometer software. The pyrolysis and vaporization temperatures were 500 degrees C and 2200 degrees C, respectively. To evaluate the feasibility of a simple procedure for the determination of chlorine in food samples present in our daily lives, two different digestion methods were applied, namely (A) an acid digestion method using HNO3 only at room temperature, and (B) a digestion method with Ag, HNO3 and H2O2, where chlorine is precipitated as a low-solubility salt (AgCl), which is then dissolved with ammonia solution. The experimental results obtained with method B were in good agreement with the certified values and demonstrated that the proposed method is more accurate than method A. This is because the formation of silver chloride prevented analyte losses by volatilization. The limit of detection (LOD, 3 sigma/s) for Cl in methods A and B was 18 mu g g(-1) and 9 mu g g(-1), respectively, 1.7 and 3.3 times lower compared to published work using inductively coupled plasma optical emission spectrometry, and absolute LODs were 2.4 and 1.2 ng, respectively. (C) 2012 Elsevier B.V. All rights reserved.

Análise multicomponente simultânea por espectrofotometria de absorção molecular UV-VIS

This review presents the evolution of simultaneous multicomponent analysis by absorption spectrophotometry in the ultraviolet and visual regions in terms of some qualitative and quantitative analysis techniques, otimization methods, as well as applications and modern trends.

New Intermediate band sulphide nanoparticles acting in the full visible light range spectra as an active photocatalyst

Nowadays one of the challenges of materials science is to find new technologies that will be able to make the most of renewable energies. An example of new proposals in this field are the intermediate-band (IB) materials, which promise higher efficiencies in photovoltaic applications (through the intermediate band solar cells), or in heterogeneous photocatalysis (using nanoparticles of them, for the light-induced degradation of pollutants or for the efficient photoevolution of hydrogen from water). An IB material consists in a semiconductor in which gap a new level is introduced [1], the intermediate band (IB), which should be partially filled by electrons and completely separated of the valence band (VB) and of the conduction band (CB). This scheme (figure 1) allows an electron from the VB to be promoted to the IB, and from the latter to the CB, upon absorption of photons with energy below the band gap Eg, so that energy can be absorbed in a wider range of the solar spectrum and a higher current can be obtained without sacrificing the photovoltage (or the chemical driving force) corresponding to the full bandgap Eg, thus increasing the overall efficiency. This concept, applied to photocatalysis, would allow using photons of a wider visible range while keeping the same redox capacity. It is important to note that this concept differs from the classic photocatalyst doping principle, which essentially tries just to decrease the bandgap. This new type of materials would keep the full bandgap potential but would use also lower energy photons. In our group several IB materials have been proposed, mainly for the photovoltaic application, based on extensively doping known semiconductors with transition metals [2], examining with DFT calculations their electronic structures. Here we refer to In2S3 and SnS2, which contain octahedral cations; when doped with Ti or V an IB is formed according to quantum calculations (see e.g. figure 2). We have used a solvotermal synthesis method to prepare in nanocrystalline form the In2S3 thiospinel and the layered compound SnS2 (which when undoped have bandgaps of 2.0 and 2.2 eV respectively) where the cation is substituted by vanadium at a ?10% level. This substitution has been studied, characterizing the materials by different physical and chemical techniques (TXRF, XRD, HR-TEM/EDS) (see e.g. figure 3) and verifying with UV spectrometry that this substitution introduces in the spectrum the sub-bandgap features predicted by the calculations (figure 4). For both sulphide type nanoparticles (doped and undoped) the photocatalytic activity was studied by following at room temperature the oxidation of formic acid in aqueous suspension, a simple reaction which is easily monitored by UV-Vis spectroscopy. The spectral response of the process is measured using a collection of band pass filters that allow only some wavelengths into the reaction system. Thanks to this method the spectral range in which the materials are active in the photodecomposition (which coincides with the band gap for the undoped samples) can be checked, proving that for the vanadium substituted samples this range is increased, making possible to cover all the visible light range. Furthermore it is checked that these new materials are more photocorrosion resistant than the toxic CdS witch is a well know compound frequently used in tests of visible light photocatalysis. These materials are thus promising not only for degradation of pollutants (or for photovoltaic cells) but also for efficient photoevolution of hydrogen from water; work in this direction is now being pursued.

V-substituted In2S3: an intermediate band material with photocatalytic activity in the whole visible light range

We proposed in our previous work V-substituted In2S3 as an intermediate band (IB) material able to enhance the efficiency of photovoltaic cells by combining two photons to achieve a higher energy electron excitation, much like natural photosynthesis. Here this hyper-doped material is tested in a photocatalytic reaction using wavelength-controlled light. The results evidence its ability to use photons with wavelengths of up to 750 nm, i.e. with energy significantly lower than the bandgap (=2.0 eV) of non-substituted In2S3, driving with them the photocatalytic reaction at rates comparable to those of non-substituted In2S3 in its photoactivity range (λ ≤ 650 nm). Photoluminescence spectra evidence that the same bandgap excitation as in V-free In2S3 occurs in V-substituted In2S3 upon illumination with photons in the same sub-bandgap energy range which is effective in photocatalysis, and its linear dependence on light intensity proves that this is not due to a nonlinear optical property. This evidences for the first time that a two-photon process can be active in photocatalysis in a single-phase material. Quantum calculations using GW-type many-body perturbation theory suggest that the new band introduced in the In2S3 gap by V insertion is located closer to the conduction band than to the valence band, so that hot carriers produced by the two-photon process would be of electron type; they also show that the absorption coefficients of both transitions involving the IB are of significant and similar magnitude. The results imply that V-substituted In2S3, besides being photocatalytically active in the whole visible light range (a property which could be used for the production of solar fuels), could make possible photovoltaic cells of improved efficiency.

Estudio de los mecanismos moleculares involucrados en la inmunosupresión observada durante la infección con Trypanosoma cruzi: Rol de la vía PD-1/PD1-L y E3 ubiquitina ligasas. Molecular mechanismns involved in the immunosupression during Tryapanosoma cruzi infection. Role of PD1-PD1-L pathway and E3 ubiquitin ligases.

Trypanosoma cruzi es el agente causal de la enfermedad de Chagas, un problema de salud importante en América Latina, así como también en América Central, ya que causa infección crónica afectando a millones de personas [1]. Durante esta enfermedad se han descripto varias alteraciones de la respuesta inmune, entre ellas una severa inmunosupresión durante la etapa aguda de la infección, tanto en humanos como en ratones. Células T provenientes de ratones infectados activadas in vitro, muestran reducción en la respuesta proliferativa a mitógenos, característica de un estado de inmunosupresión [2-4]. La falla del sistema inmune durante estadios tempranos de la infección probablemente colabore con la diseminación y el establecimiento del parásito. Un gran número de estudios se han focalizado en la identificación de mecanismos moleculares responsables del fenómeno de inmunosupresión, entre los mecanismos citados se ha demostrado presencia de células supresoras [5-9], factores inmunosupresores presentes en el parásito [2, 3, 10-13], producción excesiva de óxido nítrico [14], disminuida producción de IL-2 y reducida expresión del receptor de IL2 en células de bazo de animales infectados [9, 15-17]. Muchos de estos mecanismos han sido exhaustivamente investigados, sin embargo no está del todo claro si existen mecanismos adicionales involucrados en la inmunosupresión de la célula T. Adicionalmente, en los últimos años nuevas moléculas que median la regulación negativa de la célula T, entre las cuales están PD-1/PD1-L [18], arginasa [19] y E3 ubiquitina ligasas [20-22], han sido reportadas durante inmunosupresión en diversas infecciones. Trypanosoma cruzi, the etiological agent of Chagas’ disease, is parasite causing chronic infections in human and other mammalian species. There is an important immunosupresion during the acute phase of the infection that contribute to the dissemination and installation of the parasite. Several studies have been focused on identifying the mechanisms involved in the immunosupresion; however it is not clear if there are additional mechanisms implicated. In addition, during the last years new molecules involved in the negative T cell regulation such as PD-1/PD1-L pathway and E3 ubiquitin ligases (E3-Ub-Lig) have been reported. It has been demonstrated, that E3-Ub-Lig control the amount and localization of intracellular signal mediators, limiting T cell activation. Moreover, these mechanisms mediate the immunosupresion observed during several infections leading to the persistence of the pathogen in the host. In this project the role of E3-Ub-Lig on the T cell immunosupresion and hipo-response mechanisms observed during T. cruzi infection will be studied. On the other hand, it has been reported that some pathogens release proteins with E3-Ub-Lig activity modifying the ubiquitination process to promote their survival and replication in the host. Recently, a protein with E3-Ub-Lig activity was identified in T. cruzi, however its target molecule has not been discovered yet. Therefore, one of the aims of this project consists on studying different potential target molecules for this novel E3-Ub-Lig. In addition, during the last years, important progress has been done about the biological rol of PD-1/PD1-L pathway on the regulation of the immune response in several infections. However, it is not well known how PD-1/PD1-L pathway transduces signals at intracelular level to block T cell response. Because of this, it is interesting to study if there is any relation between the PD-1/PD1-L pathway and E3-Ub-Lig on the mechanism of T cell immunosupression during T. cruzi infection.

Molecular pathways involved in the antineoplastic effects of calcitriol on insulinoma cells.

We have previously reported that in tumorigenic pancreatic beta-cells, calcitriol exerts a potent antitumorigenic effect by inducing apoptosis, cell growth inhibition, and reduction of solid beta-cell tumors. Here we have studied the molecular pathways involved in the antineoplastic activity of calcitriol on mouse insulinoma beta TC(3) cells, mouse insulinoma beta TC expressing or not expressing the oncogene p53, and beta TC-tet cells overexpressing or not the antiapoptotic gene Bcl2. Our results indicate that calcitriol-induced apoptosis was dependent on the function of p53 and was associated with a biphasic increase in protein levels of transcription factor nuclear factor-kappa B. Calcitriol decreased cell viability by about 40% in p53-retaining beta TC and in beta TC(3) cells; in contrast, beta TC p53(-/-) cells were only minimally affected. Calcitriol-induced cell death was regulated by members of the Bcl-2 family of apoptosis regulatory proteins, as shown by calcitriol-induced up-regulation of proapoptotic Bax and Bak and the lack of calcitriol-induced cytotoxicity in Bcl-2-overexpressing insulinoma cells. Moreover, calcitriol-mediated arrest of beta TC(3) cells in the G(1) phase of the cell cycle was associated with the abnormal expression of p21 and G(2)/M-specific cyclin B2 genes and involved the DNA damage-inducible factor GADD45. Finally, in beta TC(3) cells, calcitriol modulated the expression of IGF-I and IGF-II genes. In conclusion, these findings contribute to the understanding of the antitumorigenic effects of calcitriol on tumorigenic pancreatic beta-cells and further support the rationale of its utilization in the treatment of patients with malignant insulinomas.

Primary endemic Cryptococcosis gattii by molecular type VGII in the state of Pará, Brazil

In order to study the infectious agents causing human disseminated cryptococcosis in the state of Pará, North Brazil, 56 isolates of Cryptococcusspp. (54 isolated from cerebral spinal fluid and two from blood cultures) from 43 cases diagnosed between 2003-2007 were analysed. The species were determined through morphological and physiological tests and genotypes were determined by URA5-RFLP and PCR-fingerprinting (wild-type phage M13). The following species and genotypes were identified: Cryptococcus neoformans VNI (28/56, 50%), Cryptococcus gattii VGII (25/56, 44.64%) and C. gattii VGI (3/56, 5.26%). The genotype VNI occurred in 12 out of 14 HIV-positive adults, whereas the genotype VGII occurred in 11 out of 21 HIV-negative adults (p < 0.02, OR = 6.6 IC95% 0.98-56.0). All patients less than 12 years old were HIV negative and six cases were caused by the VGII genotype, one by the VGI and one by VNI. Therefore, endemic primary mycosis in HIV-negative individuals, including an unexpectedly high number of children, caused by the VGII genotype deserves further study and suggests the need for surveillance on cryptococcal infection in the state of Pará, Eastern Amazon.

Quelques mécanismes moléculaires impliqués dans la pathogenèse du diabète de type II et leur importance thérapeutique potentielle [Various molecular mechanisms involved in the pathogenesis of type II diabetes and their potential therapeutic importance]

The pancreatic beta cell presents functional abnormalities in the early stages of development of non-insulin dependent diabetes mellitus (NIDDM). The disappearance of the first phase of insulin secretion induced by a glucose load is a early marker of NIDDM. This abnormality could be secondary to the low expression of the pancreatic glucose transporter GLUT2. Together with the glucokinase enzyme, GLUT2 is responsible for proper beta cell sensing of the extracellular glucose levels. In NIDDM, the GLUT2 mRNA levels are low, a fact which suggests a transcriptional defect of the GLUT2 gene. The first phase of glucose-induced insulin secretion by the beta pancreatic cell can be partly restored by the administration of a peptide discovered by a molecular approach, the glucagon-like peptide 1 (GLP-1). The gene encoding for the glucagon is expressed in a cell-specific manner in the A cells of the pancreatic islet and the L cells of the intestinal tract. The maturation process of the propeptide encoded by the glucagon gene is different in the two cells: the glucagon is the main hormone produced by the A cells whereas the glucagon-like peptide 1 (GLP-1) is the major peptide synthesized by the L cells of the intestine. GLP-1 is an incretin hormone and is at present the most potent insulinotropic peptide. The first results of the administration of GLP-1 to normal volunteers and diabetic patients are promising and may be a new therapeutic approach to treating diabetic patients.

Molecular evolutionary patterns in the Glomeromycota;

Abstract Arbuscular mycorrhizal fungi (AMF) form symbiosis with roots of approximately 80% of known land plants. These fungi play a key role in the ecology and adaptation of plants to various ecosystems.by increasing the plant resources for various nutrients. Despite their important ecological role, we still have poor understanding of their genetic structure and their molecular evolution. The work presented in this thesis aims to isolate and analyse AMF genes with various molecular techniques, in order to obtain new insights about their genetics, phylogeny and molecular evolution. Some AMF genes were shown through phylogenetic analyses to be more related with plants or mycoparasites than with other fungal organisms. These results led to the prediction that lateral gene transfers (LGT) occurred between AMF and plants during their long-term co-évolution. By phylogenetic and molecular analyses, in the chapter 2 I demonstrate that the hypothesis of LGT is most likely a consequence of analyses carried out on contaminant non AMF-DNA. In addition, various features characteristic of AMF genes have been determined, allowing researchers to scan their own sequence databases for potential non-AMF contaminants. Phylogenetic relationships of AMF with other fungi has been mostly analysed using molecular markers of ribosomal origin. In chapter 2 I successfully isolated gene encoding α- and ß-tubulins from several AMF genera. Consequently, phylogenetic analyses showed that AMF possess an unexpected relationship with ancestral aquatic fungi (chytrids). These results are consistent with the prediction stating that AMF may have played an important role in the colonisation of land by green plants through the establishment of a symbiosis and after the divergence of AMF from aquatic ancestors. In Chapter 4 I tried to isolate the entire AMF gene family encoding P-Type II ATPases, in order to determine their molecular evolution with the fungal kingdom. These genes were further analysed to detect the level of sequence polymorphism that is present within an AMF population. The results obtained show that mutational events previously thought as occurring only among divergent evolutionary lineages (gene duplications, indel mutations in coding regions) can occur within a single population of AMF. These results have far reaching consequences for our understanding of the genetics and ecology of AMF. Résumé Les champignons endomycorrhiziens arbusculaires (CEA) forment une symbiose racinaire avec environ 80% des plantes vasculaires connues. Ces champignons possèdent un rôle important dans l'écologie et l'adaptation des plantes au sein de différents écosystèmes en .augmentant leurs ressources en nutriments. Le travail présenté dans cette thèse se propose d'isoler et d'analyser certains gènes de CEA avec différentes techniques moléculaires à fin d'obtenir de pÌus amples informations concernant l'évolution moléculaire, la phylogénie et leur diversité génétique à diverses échelles taxonomiques. Certaines analyses phylogénétiques des CEA ont conduit à l'hypothèse que des transferts horizontaux de gènes (THG) ont pu avoir lieu durant leur longue co-évolution avec les plantes vasculaires. Dans le chapitre 2 de cette thèse nous démontrons par analyses moléculaire et phylogénétique que l'hypothèse de THG est une conséquence de contaminations à partir d'ADN de plante ou d'autres micro-organismes. De plus, de nombreuses caractéristiques moléculaires de CEA ont pu être déterminées, permettant la mise en place d'un plan à suivre lors de l'analyse de gènes de CEA dans les études futures. Les relations évolutives des. CEA avec d'autres champignons ont été analysées majoritairement à l'aide de marqueurs moléculaires d'origine ribosomiale. Dans les chapitres 2 et 3 j'ai isolé des gènes codant pour l'a- et la ß-tubuline chez différents genres, de CEA. Les analyses phylogénétiques ont démontré une parenté entre les CEA et des champignons aquatiques ancestraux (chytrides). Ces résultats sont en accord avec l'hypothèse selon laquelle les CEA ont probablement joué un rôle primordial dans l'établissement des plantes sur terre à travers une symbiose et suite à leur évolution à partir d'ancêtres vivant dans des milieux aquatiques: Dans le chapitre 4 j'ai isolé une entière famille de gènes chez les CEA codant des ATPases de la membrane plasmique, et étudié leur évolution moléculaire dans le règne des champignons. Ces mêmes gènes ont été analysés ultérieurement à fin de déterminer le degré de polymorphisme de séquence qui peut être présent au sein d'une population de CEA. Les résultats obtenus montrent que des évènements mutationnels considérés comme apparaissant exclusivement dans des lignées évolutives très divergentes (duplication de gènes, insertions/délétions dans des régions transcrites du génome) ont lieu sein d'une même population de CEA. Cette découverte a un impact important sur nos connaissances concernant la génétique des populations des CEA et leur écologie.

Molecular mechanisms involved in the activation and regulation of the alpha 1-adrenergic receptor subtypes.

The adrenergic receptors (ARs) belong to the superfamily of membrane-bound G protein coupled receptors (GPCRs). Our investigation has focused on the structure-function relationship of the alpha 1b-AR subtype used as the model system for other GPCRs. Site-directed mutagenesis studies have elucidated the structural domains of the alpha 1b-AR involved in ligand binding, G protein coupling or desensitization. In addition, a combined approach using site-directed mutagenesis and molecular dynamics analysis of the alpha 1b-AR has provided information about the potential mechanisms underlying the activation process of the receptor, i.e. its transition from the 'inactive' to the 'active' conformation.