Modelo Tridimensional de Acolhimento e Integração Organizacional

Dissertação de Mestrado apresentada no ISPA – Instituto Universitário para obtenção do grau de Mestre em Psicologia especialidade em Psicologia Social e das Organizações

Modelo tridimensional del tendón del músculo supraespinoso

Introducción: Teniendo en cuenta el envejecimiento de la población y la alta prevalencia de las lesiones del manguito rotador no es de extrañar que esta patología se convierta en un problema de salud pública. Se sabe que el aumento en el tamaño de una lesión se asocia con la aparición de síntomas, pero no existen herramientas que permitan predecir la evolución del tamaño de una lesión. Con esto en mente se desarrollo una línea de investigación para estudiar el mecanismo de falla que inicia con la realización de un modelo tridimensional de un tendón del musculo supraespinoso sano. Materiales y métodos: Se caracterizo el tendón del músculo supraespinoso aplicando cargas uniaxiales a 7 complejos humero-tendón-escápula cadavéricos. Con los datos obtenidos se alimento un modelo tridimensional lineal isotrópico analizando la concentración de esfuerzos de von Misses Resultados: Del ensayo uniaxial se obtuvieron curvas esfuerzo-deformación homogéneas para el 20% de la deformación inicial, obteniendo un modulo de Young (14.4±2.3MPa) y un coeficiente de Poisson (0.14) con una concentración de esfuerzos de en la zona central de la cara articular del tendón, cercana a su inserción. Encontramos una disminución del 5% en los esfuerzos al retirar el acromion del modelo. Conclusiones: Se caracterizó de manera exitosa y se obtuvo un modelo tridimensional del tendón. La distribución de esfuerzos es compatible con la reportada en la literatura. El acromion no tiene mayor importancia en la magnitud de los esfuerzos en nuestro modelo. Este es el punto de partida para estudiar el mecanismo de falla.

A noção de curva de nível no modelo tridimensional

Pós-graduação em Geografia - IGCE

O modelo tridimensional físico e seu papel na educação patrimonial

Este artigo versa sobre uma pesquisa integrante do Núcleo de Apoio à Pesquisa em Estudos de Linguagem em Arquitetura e Cidade (N.ELAC), que desenvolve pesquisas em Linguagem e Representação. Entre as diversas formas de representação em arquitetura, a presente pesquisa traz o modelo tridimensional físico como ferramenta que proporciona maior facilidade de leitura do projeto, sendo mais concreta que os desenhos técnicos. Objetiva-se, assim, destacar a importância do modelo físico como meio de aproximação da população ao patrimônio arquitetônico. Como estudo de caso, foi escolhido o Edifício E1, obra de Ernest Mange e Hélio Duarte. Localizado no campus da USP em São Carlos, é considerado patrimônio da cidade, entretanto, encontra-se praticamente enclausurado no interior do campus, dificultando maior contato da comunidade com o edifício. O projeto do edifício utilizou apenas o desenho como representação, não incluindo nenhum tipo de modelo tridimensional (físico ou digital). A partir de um levantamento das representações gráficas utilizadas pelos projetistas, foi possível fazer uma comparação entre o nível de compreensão do projeto apenas com as peças gráficas dos arquitetos e a partir do modelo físico, produzido pela pesquisadora. Foi realizado um pré-teste em escola pública municipal, despertando o interesse desses alunos pelo edifício em questão.

Modelo tridimensional de camino aleatorio para un derrame de petróleo : aplicación al derrame producido por el North Cape

Doctorado en Ciencias Físicas. Programa de Oceanografía y Física aplicada.

Obtención del modelo tridimensional de dos fragmentos de globos de lava de la erupción volcánica submarina de La Isla de El Hierro en 2011, mediante sistemas escáner laser 3D.

El objetivo del proyecto consiste en la realización de un modelo tridimensional,mediante la utilización de un equipo laser escáner 3D, de los fragmentos de unos globos de lava emergidos de las erupciones que ocurrieron en la isla canaria de ElHierro, en Octubre de 2011. Se persigue con dicho modelo, conseguir una muestra virtual de unos restos geológicos que, por su naturaleza, son extremadamente frágiles y así permitir que puedan ser estudiados con sus características de la forma más completa posible sin necesidad de ser manipulados incluso cuando las muestras físicas se hayan deteriorado.

Obtención del modelo tridimensional de una pieza de terracota mediante tecnología láser escáner 3D.

El objetivo del presente Proyecto Fin de Carrera consiste en obtener el modelo tridimensional de una pieza de terracota, mediante la tecnología Láser Escáner 3D. Se plantea como objetivo de este proyecto el análisis del comportamiento del escáner y de la modelización 3D en relación a los tipos de materiales. Se realizarán ensayos con piezas construidas con materiales metálicos de mayor o menor complejidad y se concluirá con el estudio de la pieza de terracota seleccionada para este trabajo. El modelo se obtendrá con una precisión interna 2 mm.

Obtención del modelo tridimensional de la puerta de La Latina del S. XVI d.C. mediante equipo láser escáner terrestre.

El objetivo de este Proyecto Fin de Carrera (PFC) es la obtención de un modelo tridimensional de “La Puerta de la Latina”, ubicada en el aparcamiento delantero de la Escuela Técnica Superior de Arquitectura de la Universidad Politécnica de Madrid. El levantamiento se realiza con el equipo láser escáner terrestre Riegl LMS-Z420i. Tras la toma de datos se efectuará el tratamiento de la nube de puntos y se obtendrá una “imagen realista” del modelo, entendiendo por “imagen realista”una representación final en la que, partiendo del modelo digital triangulado, se realiza una asignación de texturas a partir de imágenes obtenidas in situ. Este proyecto pretende ser un ensayo de las posibilidades de esta tecnología en el proceso de la representación tridimensional de edificios de interés arquitectónico e histórico.

Obtención del modelo tridimensional de un puente mediante tecnología láser escáner.

El objetivo principal de este Trabajo Fin de Grado (TFG) es la medición con un equipo láser escáner 3D y posterior modelado tridimensional de un puente situado en el municipio El Puente del Arzobispo, pueblo de la provincia de Toledo (Castilla la Mancha). Para que el modelo tuviera un aspecto realista se realizaron fotografías panorámicas para dotarlo de color y textura. En este proyecto se describen las fases de trabajo para conseguir el modelado final, los programas que se han utilizado y se analiza el potencial de la tecnología láser escáner en una de sus múltiples aplicaciones. La tecnología escáner láser es cada vez más utilizada en todo tipo de campos, y especialmente útil en arqueología ya que permite hacer un análisis exhaustivo sin tocar el elemento a estudiar y obtener, con una procesión alta en un tiempo relativamente corto, un modelo tridimensional de un elemento. El flujo de trabajo de un proyecto de modelado tridimensional con tecnología láser escáner sigue siempre los mismos pasos, que son los siguientes:  Planificación previa, en la que se debe tener en cuenta la finalidad del escaneado y la intensidad de captura  Captura de datos en campo  Preparación de los datos  Registro y georreferenciación  Procesamiento de las nubes de puntos

Modelo tridimensional em elementos finitos para a análise de cabo umbilical STU submetido ao carregamento de crushing.

Este trabalho desenvolve e apresenta um modelo tridimensional em elementos finitos de um cabo umbilical do tipo STU (Steel Tube Umbilical) utilizado na extração offshore de petróleo. Tal modelo é utilizado para estudar o carregamento de crushing, que é imposto ao cabo umbilical pelas sapatas do tensionador durante o seu lançamento, de modo a obter de forma detalhada a distribuição de tensões nos componentes do núcleo, com foco nos tubos de aço utilizados para o transporte de fluidos. A metodologia empregada no desenvolvimento do modelo é descrita detalhadamente ao longo do trabalho, de forma que possa vir a ser utilizada no estudo de outras configurações de cabos umbilicais. O modelo elaborado é utilizado (i) como paradigma para a validação de um modelo bidimensional, que visa analisar o mesmo problema de forma mais simples e rápida, e (ii) para o estudo do comportamento das tensões nos tubos de aço na região de transição de entrada/saída da sapata. Na comparação entre os modelos bi e tridimensional, o trabalho conclui pela validade do modelo bidimensional na avaliação das tensões nos tubos de aço resultantes do carregamento de crushing, na região central do cabo. O estudo realizado na região de transição de entrada/saída da sapata permitiu verificar que ocorre um aumento dos níveis de tensão nos tubos de aço nessas regiões de transição, com redistribuição do campo de tensões após plastificação.

Modelo tridimensional de la calidad en organizaciones deportivas: calidad emocional en usuarios/as infantiles

En el presente estudio el objetivo principal es evaluar la calidad en las organizaciones deportivas, centrado en el análisis de la calidad emocional de los servicios deportivos infantiles. Para ello, es necesario analizar los criterios relevantes para los/as usuarios/as más pequeños/as y contrastarla con la de sus padres/madres, empleados/as y responsables de las instalaciones deportivas y así poder contribuir a una mejora en la gestión de la calidad total de los servicios deportivos municipales. Se trabaja con 74 participantes obtenidos mediante un muestro intencional, de los cuales 47 participaron en las entrevistas individuales y 27 en los grupos focales. Se emplea una metodología mixta (mixed methods) con un diseño incrustado, realizando entrevistas individuales y grupos focales, desde la vertiente cualitativa, y hallando la comparación de proporciones entre las frecuencias de determinadas categorías desde la vertiente cuantitativa. El análisis de contenido se realizó con el programa Atlas ti v.7.1.8., y la comparación de proporciones con la prueba binomial y el programa Statgraphics. Los resultados obtenidos indican que las facetas referentes a la dimensión de calidad emocional o relacional, como la comprensión auténtica, iniciativa y empatía son determinantes para tener una calidad positiva del servicio, junto a los aspectos tangibles. Existen diferencias entre los aspectos óptimos y no óptimos. Se concluye, que una buena interacción entre los/as empleados/as y usuarios/as es determinante para la calidad de servicios deportivos, así como el buen estado, conservación, imagen y limpieza de los elementos tangibles, junto a una buena higiene y vestimenta adecuada por parte de los/as empleados/as.

O sono em adolescentes portugueses: Proposta de um modelo tridimensional

O sono é uma necessidade básica que influencia e é simultaneamente influenciada pela diversidade de atividades, papéis e contextos de vida, assumindo particular importância nos adolescentes. Apresenta-se um estudo com 400 alunos do 9º e 11º ano de escolaridade, de duas escolas da região de Lisboa, avaliados através do Questionário Sobre Sono para Adolescentes – QSSA. Os resultados quantitativos da caracterização do sono incidiram sobre hábitos, auto perceções e conhecimentos. Da exploração qualitativa dos fatores invocados por uma subamostra de 100 adolescentes como fundamento das suas auto perceções, emergiram as categorias de qualidade, importância e atitudes. Com base nestes resultados, propõe-se um modelo tridimensional acerca do sono dos adolescentes que contempla hábitos de sono, fatores pessoais e fatores ambientais.

Do modelo geométrico ao modelo físico: o tridimensional na educação do arquiteto e urbanista

In the teaching practice of architecture and urbanism in Brazil, educational legislation views modeling laboratories and workshops as an indispensable component of the infrastructure required for the good functioning of any architectural course of study. Although the development of information technology at the international level has created new possibilities for digital production of architectural models, research in this field being underway since the early 1990s, it is only from 2007 onwards that such technologies started to be incorporated into the teaching activity of architecture and urbanism in Brazil, through the pioneering experience at LAPAC/FEC/UNICAMP. It is therefore a recent experiment whose challenges can be highlighted through the following examples: (i) The implementation of digital prototyping laboratories in undergraduate courses of architecture and urbanism is still rare in Brazil; (ii) As a new developing field with few references and application to undergraduate programs, it is hard to define methodological procedures suitable for the pedagogical curricula already implemented or which have already been consolidated over the years; (iii) The new digital ways for producing tridimensional models are marked with specificities which make it difficult to fit them within the existing structures of model laboratories and workshops. Considering the above, the present thesis discusses the tridimensional model as a tool which may contribute to the development of students skills in perceiving, understanding and representing tridimensional space. Analysis is made of the relation between different forms of models and the teaching of architectural project, with emphasis on the design process. Starting from the conceptualization of the word model as it is used in architecture and urbanism, an attempt is made to identify types of tridimensional models used in the process of project conception, both through the traditional, manual way of model construction as well as through the digital ones. There is also an explanation on how new technologies for digital production of models through prototyping are being introduced in undergraduate academic programs of architecture and urbanism in Brazil, as well as a review of recent academic publications in this area. Based on the paradigm of reflective practice in teaching as designed by Schön (2000), the experiment applied in the research was undertaken in the integrated workshop courses of architectural project in the undergraduate program of architecture and urbanism at Universidade Federal do Rio Grande do Norte. Along the experiment, physical modeling, geometric modeling and digital prototyping are used in distinct moments of the design process with the purpose of observing the suitability of each model to the project s phases. The procedures used in the experiments are very close to the Action Research methodology in which the main purpose is the production of theoretical knowledge by improving the practice. The process was repeated during three consecutive semesters and reflection on the results which were achieved in each cycle helped enhancing the next one. As a result, a methodological procedure is proposed which consists of the definition of the Tridimensional Model as the integrating element for the contents studied in a specific academic period or semester. The teaching of Architectural Project as it is developed along the fifth academic period of the Architecture and Urbanism undergraduate program of UFRN is taken as a reference

Do modelo geométrico ao modelo físico: o tridimensional na educação do arquiteto e urbanista

In the teaching practice of architecture and urbanism in Brazil, educational legislation views modeling laboratories and workshops as an indispensable component of the infrastructure required for the good functioning of any architectural course of study. Although the development of information technology at the international level has created new possibilities for digital production of architectural models, research in this field being underway since the early 1990s, it is only from 2007 onwards that such technologies started to be incorporated into the teaching activity of architecture and urbanism in Brazil, through the pioneering experience at LAPAC/FEC/UNICAMP. It is therefore a recent experiment whose challenges can be highlighted through the following examples: (i) The implementation of digital prototyping laboratories in undergraduate courses of architecture and urbanism is still rare in Brazil; (ii) As a new developing field with few references and application to undergraduate programs, it is hard to define methodological procedures suitable for the pedagogical curricula already implemented or which have already been consolidated over the years; (iii) The new digital ways for producing tridimensional models are marked with specificities which make it difficult to fit them within the existing structures of model laboratories and workshops. Considering the above, the present thesis discusses the tridimensional model as a tool which may contribute to the development of students skills in perceiving, understanding and representing tridimensional space. Analysis is made of the relation between different forms of models and the teaching of architectural project, with emphasis on the design process. Starting from the conceptualization of the word model as it is used in architecture and urbanism, an attempt is made to identify types of tridimensional models used in the process of project conception, both through the traditional, manual way of model construction as well as through the digital ones. There is also an explanation on how new technologies for digital production of models through prototyping are being introduced in undergraduate academic programs of architecture and urbanism in Brazil, as well as a review of recent academic publications in this area. Based on the paradigm of reflective practice in teaching as designed by Schön (2000), the experiment applied in the research was undertaken in the integrated workshop courses of architectural project in the undergraduate program of architecture and urbanism at Universidade Federal do Rio Grande do Norte. Along the experiment, physical modeling, geometric modeling and digital prototyping are used in distinct moments of the design process with the purpose of observing the suitability of each model to the project s phases. The procedures used in the experiments are very close to the Action Research methodology in which the main purpose is the production of theoretical knowledge by improving the practice. The process was repeated during three consecutive semesters and reflection on the results which were achieved in each cycle helped enhancing the next one. As a result, a methodological procedure is proposed which consists of the definition of the Tridimensional Model as the integrating element for the contents studied in a specific academic period or semester. The teaching of Architectural Project as it is developed along the fifth academic period of the Architecture and Urbanism undergraduate program of UFRN is taken as a reference

Do modelo geométrico ao modelo físico: o tridimensional na educação do arquiteto e urbanista

In the teaching practice of architecture and urbanism in Brazil, educational legislation views modeling laboratories and workshops as an indispensable component of the infrastructure required for the good functioning of any architectural course of study. Although the development of information technology at the international level has created new possibilities for digital production of architectural models, research in this field being underway since the early 1990s, it is only from 2007 onwards that such technologies started to be incorporated into the teaching activity of architecture and urbanism in Brazil, through the pioneering experience at LAPAC/FEC/UNICAMP. It is therefore a recent experiment whose challenges can be highlighted through the following examples: (i) The implementation of digital prototyping laboratories in undergraduate courses of architecture and urbanism is still rare in Brazil; (ii) As a new developing field with few references and application to undergraduate programs, it is hard to define methodological procedures suitable for the pedagogical curricula already implemented or which have already been consolidated over the years; (iii) The new digital ways for producing tridimensional models are marked with specificities which make it difficult to fit them within the existing structures of model laboratories and workshops. Considering the above, the present thesis discusses the tridimensional model as a tool which may contribute to the development of students skills in perceiving, understanding and representing tridimensional space. Analysis is made of the relation between different forms of models and the teaching of architectural project, with emphasis on the design process. Starting from the conceptualization of the word model as it is used in architecture and urbanism, an attempt is made to identify types of tridimensional models used in the process of project conception, both through the traditional, manual way of model construction as well as through the digital ones. There is also an explanation on how new technologies for digital production of models through prototyping are being introduced in undergraduate academic programs of architecture and urbanism in Brazil, as well as a review of recent academic publications in this area. Based on the paradigm of reflective practice in teaching as designed by Schön (2000), the experiment applied in the research was undertaken in the integrated workshop courses of architectural project in the undergraduate program of architecture and urbanism at Universidade Federal do Rio Grande do Norte. Along the experiment, physical modeling, geometric modeling and digital prototyping are used in distinct moments of the design process with the purpose of observing the suitability of each model to the project s phases. The procedures used in the experiments are very close to the Action Research methodology in which the main purpose is the production of theoretical knowledge by improving the practice. The process was repeated during three consecutive semesters and reflection on the results which were achieved in each cycle helped enhancing the next one. As a result, a methodological procedure is proposed which consists of the definition of the Tridimensional Model as the integrating element for the contents studied in a specific academic period or semester. The teaching of Architectural Project as it is developed along the fifth academic period of the Architecture and Urbanism undergraduate program of UFRN is taken as a reference