Aplicação de modelos hidrológicos para avaliação de reservatórios de retenção e detenção combinados à obra de recuperação do canal de macrodrenagem no controle de cheias em uma bacia hidrográfica urbanizada

The aim of this paper was to evaluate the effect of retention and detention reservoirs along with the regulation in channel flow upgrade on flood for an urban watershed located at Rio Claro, SP. For this purpose, modeling and simulation techniques were applied for runoff determination and its propagation in channel. The Soil Conservation Service – SCS hydrologic model as well as Pulz and non-linear Muskingum-Cunge model were used. The software IPHS1 was applied on simulations. The results pointed out that the combination of retention increasing and detention reservoir implementation (120,000 m3, corresponding to 1.5% of the watershed area) with the streamflow upgrade (n decreasing from 0,04 to 0,02) can minimize the flood on the investigated Servidão watershed. Further, after the proposed intervention, the flood was eliminated for the investigated times of recurrence: 5, 20, 50 and 100 years. The prognostic indicated that the available area occupation had a minor effect on flow increasing due to the observed high urbanization.

Análisis del efecto laminador del cauce utilizando modelos fluviales bidimensionales

El método de Muskingum-Cunge, con más de 45 años de historia, sigue siendo uno de los más empleados a la hora de calcular el tránsito en un cauce. Una vez calibrado, permite realizar cálculos precisos, siendo asimismo mucho más rápido que los métodos que consideran las ecuaciones completas. Por esta razón, en el presente trabajo de investigación se llevó a cabo un análisis de su precisión, comparándolo con los resultados de un modelo hidráulico bidimensional. En paralelo se llevó a cabo un análisis de sus limitaciones y se ensayó una metodología práctica de aplicación. Con esta motivación se llevaron a cabo más de 200 simulaciones de tránsito en cauces prismáticos y naturales. Los cálculos se realizaron empleando el programa HEC-HMS con el método de Muskingum-Cunge de sección de 8 puntos, así como con la herramienta de cálculo hidráulico bidimensional InfoWorks ICM. Se eligieron HEC-HMS por su gran difusión e InfoWorks ICM por su rapidez de cálculo, pues emplea la tecnología CUDA (Arquitectura Unificada de Dispositivos de Cálculo). Inicialmente se validó el modelo hidráulico bidimensional contrastándolo con la formulación unidimensional en régimen uniforme y variado, así como con fórmulas analíticas de régimen variable, consiguiéndose resultados muy satisfactorios. También se llevó a cabo un análisis de la sensibilidad al mallado del modelo bidimensional aplicado a tránsitos, obteniéndose unos ábacos con tamaños recomendados de los elementos 2D que cuantifican el error cometido. Con la técnica del análisis dimensional se revisó una correlación de los resultados obtenidos entre ambos métodos, ponderando su precisión y definiendo intervalos de validez para la mejor utilización del método de Muskingum-Cunge. Simultáneamente se desarrolló una metodología que permite obtener la sección característica media de 8 puntos para el cálculo de un tránsito, basándose en una serie de simulaciones bidimensionales simplificadas. De este modo se pretende facilitar el uso y la correcta definición de los modelos hidrológicos. The Muskingum-Cunge methodology, which has been used for more 45 than years, is still one of the main procedures to calculate stream routing. Once calibrated, it gives precise results, and it is also much faster than other methods that consider the full hydraulic equations. Therefore, in the present investigation an analysis of its accuracy was carried out by comparing it with the results of a two-dimensional hydraulic model. At the same time, reasonable ranges of applicability as well as an iterative method for its adequate use were defined. With this motivation more than 200 simulations of stream routing were conducted in both synthetic and natural waterways. Calculations were performed with the aid of HEC-HMS choosing the Muskingum-Cunge 8 point cross-section method and in InfoWorks ICM, a two-dimensional hydraulic calculation software. HEC-HMS was chosen because its extensive use and InfoWorks ICM for its calculation speed as it takes advantage of the CUDA technology (Compute Unified Device Architecture). Initially, the two-dimensional hydraulic engine was compared to one-dimensional formulation in both uniform and varied flow. Then it was contrasted to variable flow analytical formulae, achieving most satisfactory results. A sensitivity size analysis of the two-dimensional rooting model mesh was also conduced, obtaining charts with suggested 2D element sizes to narrow the committed error. With the technique of dimensional analysis a correlation of results between the two methods was reviewed, assessing their accuracy and defining valid intervals for improved use of the Muskingum-Cunge method. Simultaneously, a methodology to draw a representative 8 point cross-section was developed, based on a sequence of simplified two-dimensional simulations. This procedure is intended to provide a simplified approach and accurate definition of hydrological models.

Modelo dinâmico de simulação e otimização da força normal de reação do solo para um mecanismo de corte basal

The physical model was based on the method of Newton-Euler. The model was developed by using the scientific computer program Mathematica®. Several simulations where tried varying the progress speeds (0.69; 1.12; 1.48; 1.82 and 2.12 m s-1); soil profiles (sinoidal, ascending and descending ramp) and height of the profile (0.025 and 0.05 m) to obtain the normal force of soil reaction. After the initial simulations, the mechanism was optimized using the scientific computer program Matlab® having as criterion (function-objective) the minimization of the normal force of reaction of the profile (FN). The project variables were the lengths of the bars (L1y, L2, l3 and L4), height of the operation (L7), the initial length of the spring (Lmo) and the elastic constant of the spring (k t). The lack of robustness of the mechanism in relation to the variable height of the operation was outlined by using a spring with low rigidity and large length. The results demonstrated that the mechanism optimized showed better flotation performance in relation to the initial mechanism.

Modelo de programação quadrática para análise da movimentação logística e comercialização da soja brasileira

The purpose of this work was to analyze the logistical distribution of Brazilian soybean by applying a quadratic programming to a spatial equilibrium model. The soybean transportation system is an important part of the soybean complex in Brazil, since the major part of the costs of this commodity derives from the transportation costs. Therefore, the optimization of this part of the process is essential to a better competitiveness of the Brazilian soybean in the international market. The Brazilian soybean complex have been increasing its agricultural share in the total of the exportation value in the last ten years, but due to other countries' investments the Brazilian exportations cannot be only focused on increasing its production but it still have to be more efficient. This way, a model was reached which can project new frames by switching the transportation costs and conduce the policy makers to new investments in the sector.

Estrutura de um curso de taxonomia de campo: o modelo aplicado em Ubatuba, São Paulo

The field activities are essential for the education of a good taxonomist. The most common problems found in field activities are: a) large number of students, b) heterogeneous educational background and unlevelled knowledge of the participants, c) repetitions and tendency of collecting the more evidents life-forms. The causes and consequences of such problems are discussed herein. The proposed solution is a methodology, based on many years of experience in field courses for undergraduate and graduate courses. Topics about the ideal number of participants, area of coverage, period of activity, division of work and the necessary material and equipment are discussed. According to the number of species collected at the same place, this methodology may result in a list of local species with precise information about the life-forms, habitat, common names, frequency, uses, phenology and further information in this kind of work. The results of the aplication of this metodology in a field course held in the region of Ubatuba-SP are presented.

Análise bayesiana do modelo de herança monogênica no melhoramento vegetal: um exemplo com abobrinha

A common breeding strategy is to carry out basic studies to investigate the hypothesis of a single gene controlling the trait (major gene) with or without polygenes of minor effect. In this study we used Bayesian inference to fit genetic additive-dominance models of inheritance to plant breeding experiments with multiple generations. Normal densities with different means, according to the major gene genotype, were considered in a linear model in which the design matrix of the genetic effects had unknown coefficients (which were estimated in individual basis). An actual data set from an inheritance study of partenocarpy in zucchini (Cucurbita pepo L.) was used for illustration. Model fitting included posterior probabilities for all individual genotypes. Analysis agrees with results in the literature but this approach was far more efficient than previous alternatives assuming that design matrix was known for the generations. Partenocarpy in zucchini is controlled by a major gene with important additive effect and partial dominance.

Percepção dos usuários, profissionais de saúde e gestores sobre o modelo de atendimento oftalmológico no Hospital Regional de Divinolândia - São Paulo

Purpose: This study aimed to evaluate the assistance quality through the perception of the users and municipal health managers (mayors, health secretaries and screening team). Methods: A transversal and descriptive study was carried out. Results: The sample was comprised by 359 users and 48 managers. Medical assistance was considered excellent by 79.6% of the users, 93.7% of the managers, 87.5% of the health secretaries and 100% of the screening team. Reception received a great evaluation by 73.8% of the users and 93.8% of the selectors. Conclusion: The assistance model used at the Ophthalmologic Clinic of Divinolândia obtained a high level of satisfaction pleasing both users and managers.

Proposição e avaliação de um modelo de representação dos membros superiores e escapula durante a marcha humana

Universidade Estadual de Campinas . Faculdade de Educação Física

A influencia do esporte espetaculo sobre o modelo de competição dos mais jovens no judo

Universidade Estadual de Campinas . Faculdade de Educação Física

Metodologia de ensino em educação fisica : contribuições de Vygotsky, para as reflexões sobre um modelo pedagogico

Universidade Estadual de Campinas. Faculdade de Educação Física

Modelo de inclusão digital para construção do conhecimento em qualidade de vida e atividade fisica

Universidade Estadual de Campinas. Faculdade de Educação Física

Modelo para análise do ataque no futebol = : A model to analyze soccer offensive phase

Universidade Estadual de Campinas . Faculdade de Educação Física

Modelo de análise técnico-tática do jogo de handebol : necessidades, perspectivas e implicações de um modelo de interpretação das situações de jogo em tempo real

Universidade Estadual de Campinas . Faculdade de Educação Física

Sistema de periodização em blocos : efeitos de um modelo de treinamento sobre o desempenho de nadadores velocistas de alto nivel

Universidade Estadual de Campinas . Faculdade de Educação Física

O judo; do modelo artesanal ao modelo cientifico : um estudo sobre as lutas, formação profissional e a construção do Hbitus

Universidade Estadual de Campinas . Faculdade de Educação Física