Electron field emission from sp (2)-induced insulating to metallic behaviour of amorphous carbon (a-C) films

The influence of concentration and size of sp (2) cluster on the transport properties and electron field emissions of amorphous carbon films have been investigated. The observed insulating to metallic behaviour from reduced activation energy derived from transport measurement and threshold field for electron emission of a-C films can be explained in terms of improvements in the connectivity between sp (2) clusters. The connectivity is resulted by the cluster concentration and size. The concentration and size of sp (2) content cluster is regulated by the coalescence of carbon globules into clusters, which evolves with deposition conditions.

The role of Acinetobacter sp. in biological phosphorus removal from forest industry wastewaters

Yhteenveto: Acinetobacter sp. metsäteollisuuden jätevesien biologisessa fosforinpoistossa

Transformations of morphine, codeine and their analogues by Bacillus sp

A bacterial strain belonging to the genus Bacillus isolated by enrichment culture technique using morphine as a sole source of carbon transforms morphine and codeine into 14-hydroxymorphinone and 14-hydroxycodeinone as major and 14-hydroxymorphine and 14-hydroxycodeine as minor metabolites, respectively. When the N-methyl group in morphine and codeine are replaced by higher alkyl groups, the organism still retains its ability to carry out 14-hydroxylation as well as oxidation of the C-6-hydroxyl group in these N-variants, although the level of metabolites formed are considerably low. The organism readily transforms dihydromorphine and dihydrocodeine into only dihydromorphinone and dihydrocodeinone, respectively; suggesting that the 7,8-double bond is a necessary structural feature to carry out 14-hydroxylation reaction. The cell free extract (20,000 x g supernatant), prepared from morphine grown cells, transforms morphine into 14-hydroxymorphinone in the presence of NAD(+), but fails to show activity against testosterone. However, the cell free extract prepared from testosterone grown cells contains significant levels of 17 beta- hydroxysteroid dehydrogenase but shows no activity against morphine.

Ecological Assessment of Lentic Water Bodies of Bangalore

The restoration, conservation and management of water resources require a thorough understanding of what constitutes a healthy ecosystem. Monitoring and assessment provides the basic information on the condition of our waterbodies. The present work details the study carried out at two waterbodies, namely, the Chamarajasagar reservoir and the Madiwala Lake. The waterbodies were selected on the basis of their current use and locations. Chamarajasagar reservoir serves the purpose of supplying drinking water to Bangalore city and is located on the outskirts of the city surrounded by agricultural and forest land. On the other hand, Madiwala lake is situated in the heart of Bangalore city receiving an influx of pollutants from domestic and industrial sewage. Comparative assessment of the surface water quality of both were carried out by instituting the various physico–chemical and biological parameters. The physico-chemical analyses included temperature, transparency, pH, electrical conductivity, dissolved oxygen, alkalinity, total hardness, calcium hardness, magnesium hardness, nitrates, phosphates, sodium, potassium and COD measurements of the given waterbody. The analysis was done based on the standard methods prescribed (or recommended) by (APHA) and NEERI. The biological parameter included phytoplankton analysis. The detailed investigations of the parameters, which are well within the tolerance limits in Chamarajasagar reservoir, indicate that it is fairly unpolluted, except for the pH values, which indicate greater alkalinity. This may be attributed to the natural causes and the agricultural runoff from the catchment. On the contrary, the limnology of Madiwala lake is greatly influenced by the inflow of sewage that contributes significantly to the dissolved solids of the lake water, total hardness, alkalinity and a low DO level. Although, the two study areas differ in age, physiography, chemistry and type of inflows, they still maintain a phytoplankton distribution overwhelmingly dominated by Cyanophyceae members,specifically Microcystis aeruginosa. These blue green algae apparently enter the waterbodies from soil, which are known to harbour a rich diversity of blue green flora with several species common to limnoplankton, a feature reported to be unique to the south Indian lakes.Chamarajasagar water samples revealed five classes of phytoplankton, of which Cyanophyceae (92.15 percent) that dominated other algal forms comprised of one single species of Microcystis aeruginosa. The next major class of algae was Chlorophyceae (3.752 percent) followed by Dinophyceae (3.51 percent), Bacillariophyceae (0.47 percent) and a sparsely available and unidentified class (0.12 percent).Madiwala Lake phytoplankton, in addition to Cyanophyceae (26.20 percent), revealed a high density of Chlorophyceae members (73.44 percent) dominated by Scenedesmus sp.,Pediastrum sp., and Euglena sp.,which are considered to be indicators of organic pollution. The domestic and industrial sewage, which finds its way into the lake, is a factor causing organic pollution. As compared to the other classes, Euglenophyceae and Bacillariophyceae members were the lowest in number. Thus, the analysis of various parameters indicates that Chamarajasagar reservoir is relatively unpolluted except for the high percentage of Microcystis aeruginosa, and a slightly alkaline nature of water. Madiwala lake samples revealed eutrophication and high levels of pollution, which is clarified by the physico–chemical analysis, whose values are way above the tolerance limits. Also, the phytoplankton analysis in Madiwala lake reveals the dominance of Chlorophyceae members, which indicate organic pollution (sewage being the causative factor).

Molybdenum trioxide catalyzed oxidative cross-dehydrogenative coupling of benzylic sp(3) C-H bonds: synthesis of alpha-aminophosphonates under aerobic conditions

Molybdenum trioxide (MoO3) catalyzed efficient oxidative cross-dehydrogenative-coupling (CDC) method for C-H functionalization of N-aryl tetrahydroisoquinolines has been explored. This user-friendly method of synthesizing alpha-aminophosphonates employs 1.1 equiv of dialkyl-H-phosphonate under aerobic condition. Formation of new C-P bonds from unfunctionalized starting materials under environmentally benign conditions provides an excellent avenue for the synthesis of biologically active alpha-aminophosphonates. (C) 2012 Elsevier Ltd. All rights reserved.

Euglena sp as a suitable source of lipids for potential use as biofuel and sustainable wastewater treatment

Prolific algal growth in sewage ponds with high organic loads in the tropical regions can provide cost-effective and efficient wastewater treatment and biofuel production. This work examines the ability of Euglena sp. growing in wastewater ponds for biofuel production and treatment of wastewater. The algae were isolated from the sewage treatment plants and were tested for their nutrient removal capability. Compared to other algae, Euglena sp. showed faster growth rates with high biomass density at elevated concentrations of ammonium nitrogen (NH4-N) and organic carbon (C). Profuse growth of these species was observed in untreated wastewaters with a mean specific growth rate (mu) of 0.28 day(-1) and biomass productivities of 132 mg L-1 day(-1). The algae cultured within a short period of 8 days resulted in the 98 % removal of NH4-N, 93 % of total nitrogen 85 % of ortho-phosphate, 66 % of total phosphate and 92 % total organic carbon. Euglenoids achieved a maximum lipid content of 24.6 % (w/w) with a biomass density of 1.24 g L-1 (dry wt.). Fourier transform infrared spectra showed clear transitions in biochemical compositions with increased lipid/protein ratio at the end of the culture. Gas chromatography and mass spectrometry indicated the presence of high contents of palmitic, linolenic and linoleic acids (46, 23 and 22 %, respectively), adding to the biodiesel quality. Good lipid content (comprised quality fatty acids), efficient nutrient uptake and profuse biomass productivity make the Euglena sp. as a viable source for biofuel production in wastewaters.

Organocatalytic Enantioselective Formal C(sp(2))-H Alkylation

An organocatalytic enantioselective formal C(sp(2))-H alkylation is reported. This alkylative desymmetrization of prochiral 2,2-disubstituted cyclopentene-1,3-dione is catalyzed by a bifunctional tertiary aminourea derivative, utilizes air-stable and inexpensive nitroalkanes as the alkylating agents, and delivers synthetically versatile five-membered carbocycles containing an all-carbon quaternary stereogenic center remote from the reaction site in excellent enantioselectivity.

Combined toxicity of two crystalline phases (anatase and rutile) of Titania nanoparticles towards freshwater microalgae: Chlorella sp

In view of the increasing usage of anatase and rutile crystalline phases of titania NPs in the consumer products, their entry into the aquatic environment may pose a serious risk to the ecosystem. In the present study, the possible toxic impact of anatase and rutile nanoparticles (individually and in binary mixture) was investigated using freshwater microalgae, Chlorella sp. at low exposure concentrations (0.25, 0.5 and 1 mg/L) in freshwater medium under UV irradiation. Reduction of cell viability as well as a reduction in chlorophyll content were observed due to the presence of NPs. An antagonistic effect was noted at certain concentrations of binary mixture such as (0.25, 0.25), (0.25, 0.5), and (0.5, 0.5) mg/L, and an additive effect for the other combinations, (0.25, 1), (0.5, 0.25), (0.5, 1), (1, 0.25), (1, 0.5), and (1, 1) mg/L. The hydrodynamic size analyses in the test medium revealed that rutile NPs were more stable in lake water than the anatase and binary mixtures at 6 h, the sizes of anatase (1 mg/L), rutile NPs (1 mg/L), and binary mixture (1, 1 mg/L) were 948.83 +/- 35.01 nm, 555.74 +/- 19.93 nm, and 1620.24 +/- 237.87 nm, respectively]. The generation of oxidative stress was found to be strongly dependent on the crystallinity of the nanoparticles. The transmission electron microscopic images revealed damages in the nucleus and cell membrane of algal cells due to the interaction of anatase NPs, whereas rutile NPs were found to cause chloroplast and internal organelle damages. Mis-shaped chloroplasts, lack of nucleus, and starch-pyrenoid complex were noted in binary-treated cells. The findings from the current study may facilitate the environmental risk assessment of titania NPs in an aquatic ecosystem. (C) 2015 Elsevier B.V. All rights reserved.

Microhyla laterite sp nov., A New Species of Microhyla Tschudi, 1838 (Amphibia: Anura: Microhylidae) from a Laterite Rock Formation in South West India

In recent times, several new species of amphibians have been described from India. Many of these discoveries are from biodiversity hotspots or from within protected areas. We undertook amphibian surveys in human dominated landscapes outside of protected areas in south western region of India between years 2013-2015. We encountered a new species of Microhyla which is described here as Microhyla laterite sp. nov. It was delimited using molecular, morphometric and bioacoustics comparisons. Microhyla laterite sp. nov. appears to be restricted to areas of the West coast of India dominated by laterite rock formations. The laterite rock formations date as far back as the Cretaceous-Tertiary boundary and are considered to be wastelands in-spite of their intriguing geological history. We identify knowledge gaps in our understanding of the genus Microhyla from the Indian subcontinent and suggest ways to bridge them.

Establecimiento y caracterización dendrológica de cultivares clonales Spondia sp., en el arboretum Alain Meyrat de la Universidad Nacional Agraria

El presente trabajo se realizó en el Arboretum de la Universidad Nacional Agraria. El objetivo del estudio es identificar las características morfológicas de cada cultivar clónal como: largo de la hoja, número y largo de folíolo, ancho de la base y ápice, sobrevivencia, número y tamaño de rebrotes. La metodología consta de tres etapas: recorrido entre los municipios de Masaya y Granada para la obtención de el material vegetativo con una dimensión de 1.30 m de altura y 10cm de diámetro por estaca. Establecimiento de plantación de 10 cultivares de Spondia sp. para un total de 40 estacas con una distancia de 3 x 3 m. para un área total de 243m2. Toma de datos cada seis meses para realizar el análisis estadístico empleando el programa INFOSTAT y mediante el encadenamiento simple (Distancia Euclidiana) se dividieron los 9 cultivares en 4 grupos y se procedió a realizar un ANOVA obteniendo que los cultivares clónales presentan diferencia significativa (p<000.1) en cuanto a sus variables. Como resultados se obtiene una sobrevivencia del 100% en los cultivares clónales de jocote perro, jocote agosteño, jocote rosa y jocote diente de perro, siendo el jocote de cocer sabanero el que no sobrevivió. Dentro de las características morfológicas sobresaliente se identifica como el raquis más largo al jocote rosa, con un promedio de 23.4 cm y el de menor longitud con 13.8 es el jocote agosteño, el mayor promedio de folíolos por hoja lo tiene el jocote bejuco con 20 y el de menor promedio el jocote agosteño con 14. Entre las variables número y largo de foliolo, largo del raquis, ancho de la base y ápice mediante un ANOVA se obtuvo diferencia significativa (p<000.1). De acuerdo a los estudios morfológicos aplicados a los nueve cultivares clónales sobrevivientes se ubican dentro de la especie Spondias purpurea.

Produccion y composicion quimica de la morera (Morus sp), a diferentes frecuencias de corte, Rancho Ebenezer, Masaya, Nicaragua

Se llevó a cabo un estudio durante el período lluvioso del año 2005, ‘Rancho Agropecológico’ “EBENEZER” Comarca ‘Hoja Chigüe’ Niquinohomo, Masaya, Nicaragua. El objetivo fue determinar la producción de materia seca y composición química de la biomasa a diferentes frecuencias de corte en Morera (Morus sp).Se utilizó un diseño de bloques completos al azar (BCA) con tres repeticiones. Las frecuencias de corte fueron; 30, 45 y 60 días de rebrote. Las variables de estudio fueron longitud de rebrotes (cm), rendimiento de materia seca (kg de MS/ha/corte), porcentajes de materia seca, proteína cruda, fibra cruda, calcio y fósforo. Se realizaron análisis de varianza (ANDEVA) y separaciones de medias, usando Duncan (P<0.05). Las variables codificadas en porcentajes se transforma ron, según, transformaciones arco seno de la raiz cuadrada de la proporción, con el fin de ajustar los datos porc entuales a una distribución normal, posteriormente se realizaron comparaciones de medias usando Duncan. Los resultados indican diferencias significativas entre tratamientos para las variables; longitud de rebrote (67 y 36 cm para frecuencias de 60 y 30 días);rendimiento de materia seca (1,368 y 480 kg/ha/corte, para las mismas frecuencias). Se encontraron diferencias significativas para la materia seca (27.50, 17.17 % para 60 y 30 días), fibra cruda (19.41 y,16.30 % para las mismas frecuencias), y Fósforo. Esta ultima variable presentó un comportamiento diferente; los mayores porcentajes a los 30 días (0.75) y los menores porcentajes a los 45 días, no presentándose diferencias entre 45 y 60 días (0.42). Referente a la proteína cruda y calcio, no presentaron diferencias significativas. El estudio permitió demostrar diferencias marcadas en la producción y composición química del forraje de Morera (Morus sp), observándose que, a diferencias de otros forrajes, los parámetros de calidad no presentan una disminución drástica a medida que se aumenta la edad de rebrote , con las frecuencias estudiadas.

Comportamiento agroindustrial de veinticinco variedades de caña de azúcar (Saccharum sp. hibrido) en comparación con la variedad L 68-90 en caña planta

En el ciclo 90-91 se llevó a cabo el presente trabajo en el Ingenio Javier Guerra Báez con el objetivo de determinar el comportamiento agroindustrial de 25 cultivares de caña de azúcar en comparación con la variedad L 68-90. El experimento se sembró el 21 de febrero de 1990 en un suelo franco de la serie Nandaime, la cosecha se realizó a los 12 meses de edad el 21 de febrero de 1991. El diseño utilizado fue látice triple (5 x 5) y las variables estudiadas fueron: Germinación. Población, altura de tallos, diámetro de tallos, peso promedio de los tallos, rendimiento agrícola. rendimiento industrial y rendimiento agroindustrial Los datos fueron sometidos a un análisis de varianza y prueba de rangos múltiples de Duncan al 5% de significancia. Los mejores comportamientos para cada variable en estudio los obtuvieron los siguientes cultivares: Germinación: RB 73-2727, Cp 70-321, RB 77-3720, RB 73-2223, RB 73-9735 y RB 76-5288; Población: Sp 70-1423, Cp 70-321 RB 73-1012. Cp 71-6180. RB 73-1714. RB 76-5288. RB 73-2727, Cp 72-1210 y C 87-51; Longitud de tallo: RB 73-429. Cp 70-1527. RB 73-9735. RB 73-1012. Q 96 MEX 69-420 y MEX 68-P23; DiáMetro de los tallos: RB 73-2223, Cp 74-383. MEX 53-473, RB 76-5288. RB 73-9735. RB 73-5220. RB 73-9953. Cp70-1527, MEX 56-476 y MEX 68-p23; Peso promedio de los tallos: MEX 68- p23. RB 73-9735. RB 73-2223. CP 70-1527, RB 73-429. MEX 53-473. Q 96. MEX 69-420 y MEX 56-476;Rendimiento agrícola: Cp 71 -6180. MEX 68- P23. X 69-420. RB 73-1012. Sp 70-1423. RB 76-5288 y RB 73-9735; Rendimiento industrial Q 96, Cp 70-321, Cp 72-1210, MEX 68 P23 y Cp71-6180; Rendimiento agroindustrial Cp 71-6180.MEX 68-P23. Cp 70-321. RB 76-5288, Cp 72-1210. MEX69-420, RB 73-1012 Y Q96. Las variedades que presentaron enfermedades fueron: C 87-51, Cp 71-6180, Cp 70-1527, RB 73-2223. RB 73-2727. L '8-90, Cp 74-383, Sp 70-1284, RB 73-1714 y RB 73-429.

Comportamiento agro-industrial de catorce variedades de caña de azúcar (Saccharum sp hibrido L.) en comparación con las variedades Ja 60-5 y C 87-51

El presente trabajo se llevó a cabo en el ciclo 92-93 en el Ingenio Victoria de Julio, donde se evaluaron 14 variedades de caña de azúcar en comparación con las variedades Ja 60 - 5 y C 87 - 51 para determinar el comportamiento agro-industrial de estos cultivares y seleccionar los genotipos más sobresalientes. El experimento fue establecido el 25 de enero de 1992, en un suelo arcilloso de la serie Chilamatillo, la cosecha se realizó a los 11 meses de edad del cultivo, el 16 de Dic 1992. El diseño utilizado fue de bloques completos al azar con 5 repeticiones, las variables estudiadas fueron: Germinación, población, altura de tallos, floración, diámetro de tallos, peso promedio de los tallos, rendimiento agrícola, rendimiento industrial y rendimiento agro-industrial. Los datos fueron sometidos a un análisis de varianza y prueba de tukey al 5% de margen de error. Los resultados obtenidos fueron los siguientes: Germinación; siendo las mejores RB 73-1012, CP 70-321 y Q 96. Población;las mejores numéricamente resultaron Méx 68-P 23,SP 70-1284 y SP 72-4790. Longitud de tallo; las mejores variedades fueron la SP 72-4790, Q 96, RB 73-1012 y RB 73-5220. Diámetro de los tallos; obtuvo el mejor resultado la variedad Méx 69-420 y en segundo lugar la Ja 60-5. Peso promedio de 100 tallos. ; presentando el mejor resultado el cultivar Méx 69-420 seguido de la RB 73-5220. Floración; todas las variedades florecieron a excepción del testigo C 87-51. Rendimiento agrícola; obtuvo el mejor resultado la variedad Méx 68-P 23 ocupando el segundo lugar SP 72-4790; Rendimiento industrial; entre las variedades sobresalieron numéricamente la Q 96 seguido de la C 87-51 y la CP 72-1210. Rendimiento Agro-Industrial; de acuerdo a los resultados de rangos múltiples la variedad Q 96 presenta un rendimiento estadísticamente superior a la variedad testigo Ja 60-5, superando numéricamente al resto de variedades. Las variedades que presentaron afectaciones por enfermedades fueron : RB 76-5288, SP 70-1284, SP 72-4790, CP 72-1210, SP 71-61801 CP 72-2086, Méx 69-420, Méx 68-P23, Ja 60-5 y e 87-51.