Validity of a Quantitative Clinical Measurement Tool of Trunk Posture in Idiopathic Scoliosis

STUDY DESIGN: Concurrent validity between postural indices obtained from digital photographs (two-dimensional [2D]), surface topography imaging (three-dimensional [3D]), and radiographs. OBJECTIVE: To assess the validity of a quantitative clinical postural assessment tool of the trunk based on photographs (2D) as compared to a surface topography system (3D) as well as indices calculated from radiographs. SUMMARY OF BACKGROUND DATA: To monitor progression of scoliosis or change in posture over time in young persons with idiopathic scoliosis (IS), noninvasive and nonionizing methods are recommended. In a clinical setting, posture can be quite easily assessed by calculating key postural indices from photographs. METHODS: Quantitative postural indices of 70 subjects aged 10 to 20 years old with IS (Cobb angle, 15 degrees -60 degrees) were measured from photographs and from 3D trunk surface images taken in the standing position. Shoulder, scapula, trunk list, pelvis, scoliosis, and waist angles indices were calculated with specially designed software. Frontal and sagittal Cobb angles and trunk list were also calculated on radiographs. The Pearson correlation coefficients (r) was used to estimate concurrent validity of the 2D clinical postural tool of the trunk with indices extracted from the 3D system and with those obtained from radiographs. RESULTS: The correlation between 2D and 3D indices was good to excellent for shoulder, pelvis, trunk list, and thoracic scoliosis (0.81>r<0.97; P<0.01) but fair to moderate for thoracic kyphosis, lumbar lordosis, and thoracolumbar or lumbar scoliosis (0.30>r<0.56; P<0.05). The correlation between 2D and radiograph spinal indices was fair to good (-0.33 to -0.80 with Cobb angles and 0.76 for trunk list; P<0.05). CONCLUSION: This tool will facilitate clinical practice by monitoring trunk posture among persons with IS. Further, it may contribute to a reduction in the use of radiographs to monitor scoliosis progression.

Visual Measurement and Modelling of Tool Wear in Rough Turning

Huolimatta korkeasta automaatioasteesta sorvausteollisuudessa, muutama keskeinen ongelma estää sorvauksen täydellisen automatisoinnin. Yksi näistä ongelmista on työkalun kuluminen. Tämä työ keskittyy toteuttamaan automaattisen järjestelmän kulumisen, erityisesti viistekulumisen, mittaukseen konenäön avulla. Kulumisen mittausjärjestelmä poistaa manuaalisen mittauksen tarpeen ja minimoi ajan, joka käytetään työkalun kulumisen mittaukseen. Mittauksen lisäksi tutkitaan kulumisen mallinnusta sekä ennustamista. Automaattinen mittausjärjestelmä sijoitettiin sorvin sisälle ja järjestelmä integroitiin onnistuneesti ulkopuolisten järjestelmien kanssa. Tehdyt kokeet osoittivat, että mittausjärjestelmä kykenee mittaamaan työkalun kulumisen järjestelmän oikeassa ympäristössä. Mittausjärjestelmä pystyy myös kestämään häiriöitä, jotka ovat konenäköjärjestelmille yleisiä. Työkalun kulumista mallinnusta tutkittiin useilla eri menetelmillä. Näihin kuuluivat muiden muassa neuroverkot ja tukivektoriregressio. Kokeet osoittivat, että tutkitut mallit pystyivät ennustamaan työkalun kulumisasteen käytetyn ajan perusteella. Parhaan tuloksen antoivat neuroverkot Bayesiläisellä regularisoinnilla.

Entrepreneurship Education in Basic and Upper Secondary Education – Measurement and Empirical Evidence

The starting point of this study is to direct more attention to the teacher and those entrepreneurship education practices taking place in formal school to find out solutions for more effective promotion of entrepreneurship education. For this objective, the strategy-level aims of entrepreneurship education need to be operationalised into measurable and understandable teacher-level practices. Furthermore, to enable the effective development of entrepreneurship education in basic and upper secondary level education, more knowledge is needed of the state of affairs of entrepreneurship education in teaching. The purpose of the study is to increase the level of understanding of teachers’ entrepreneurship education practices, and through this to develop entrepreneurship education. This study builds on the literature on entrepreneurship education and especially those elements referring to the aims, resources, benefits, methods, and practises of entrepreneurship education. The study comprises five articles highlighting teachers’ role in entrepreneurship education. In the first article the concept of entrepreneurship and the teachers role in reflection upon his/hers approaches to entrepreneurship education are considered. The second article provides a detailed analysis of the process of developing a measurement tool to depict the teachers’ activities in entrepreneurship education. The next three articles highlight the teachers’ role in directing the entrepreneurship education in basic and upper secondary level education. Furthermore, they analyse the relationship between the entrepreneurship education practises and the teachers’ background characteristics. The results of the study suggest a wide range of conclusions and implications. First, in spite of many outspoken aims connected to entrepreneurship education, teachers have not set any aims for themselves. Additionally, aims and results seem to mix. However, it is possible to develop teachers’ target orientation by supporting their reflection skills, and through measurement and evaluation increase their understanding of their own practices. Second, applying a participatory action process it is possible to operationalise teachers’entrepreneurship education practices. It is central to include the practitioners’ perspective in the development of measures to make sure that the concepts and aims of entrepreneurship education are understood. Third, teachers’ demographic or tenure-related background characteristics do not affect their entrepreneurship education practices, but their training related to entrepreneurship education, participation in different school-level or regional planning, and their own capabilities support entrepreneurship education. Fourth, a large number of methods are applied to entrepreneurship education, and the most often used methods were different kinds of discussions, which seem to be an easy, low-threshold way for teachers to include entrepreneurship education regularly in their teaching. Field trips to business enterprises or inviting entrepreneurs to present their work in schools are used fairly seldom. Interestingly, visits outside the school are more common than visitors invited to the school. In line, most of the entrepreneurship education practices take place in a classroom. Therefore it seems to be useful to create and encourage teachers towards more in-depth cooperation with companies (e.g. via joint projects) and to network systematically. Finally, there are plenty of resources available for entrepreneurship education, such as ready-made materials, external stakeholders, support organisations, and learning games, but teachers have utilized them only marginally.

Health literacy among young adults: a short survey tool for public health and health promotion research

Health literacy (HL) is context-specific. In public health and health promotion, HL in the private realm refers to individuals' knowledge and skills to prevent disease and to promote health in everyday life. However, there is a scarcity of measurement tools explicitly geared to private realm contexts. Our aim was to develop and test a short survey tool that captures different dimensions of HL in the context of family and friends. We used cross-sectional data from the Swiss Federal Surveys of Adolescents from 2010 to 2011, comprising 7983 males and 366 females between 18 and 25 years. HL was assessed through a set of eight items (self-reports). We used principal component analysis to explore the underlying factor structure among these items in the male sample and confirmatory factor analysis to verify the factor structure in the female sample. The results showed that the tested item set represented dimensions of functional, interactive and critical HL. Two sub-dimensions, understanding versus finding health-relevant information, denoted functional HL. Interactive and critical HL were each represented with two items. A sum score based on all eight items (Cronbach's α: 0.64) showed expected positive associations with own and parental education among males and females (p < 0.05). The short item set appears to be a feasible measurement tool to assess HL in the private realm. Its broader application in survey studies may help to improve our understanding of how this form of HL is distributed in the general population.

Quantitative measurement using scanning thermal microscopy

This thesis reports on the development of quantitative measurement using micromachined scanning thermal microscopy (SThM) probes. These thermal probes employ a resistive element at their end, which can be used in passive or active modes. With the help of a review of SThM, the current issues and potentials associated with this technique are revealed. As a consequence of this understanding, several experimental and theoretical methods are discussed, which expand our understanding of these probes. The whole thesis can be summarized into three parts, one focusing on the thermal probe, one on probe-sample thermal interactions, and the third on heat transfer within the sample. In the first part, a series of experiments are demonstrated, aimed at characterizing the probe in its electrical and thermal properties, benefiting advanced probe design, and laying a fundamental base for quantifying the temperature of the probe. The second part focuses on two artifacts observed during the thermal scans – one induced by topography and the other by air conduction. Correspondingly, two devices, probing these artifacts, are developed. A topography-free sample, utilizing a pattern transfer technique, minimises topography-related artifacts that limited the reliability of SThM data; a controlled temperature ‘Johnson noise device’, with multiple-heater design, offers a uniform, accurate, temperature distribution. Analyzing results of scan from these samples provides data for studying the thermal interactions within the probe and the tip-sample interface. In the final part, the observation is presented that quantification of measurements depends not only on an accurate measurement tool, but also on a deep understanding of the heat transfer within the sample resulting from the nanoscopic contact. It is believed that work in this thesis contributes to SThM gaining wider application in the scientific community.

Tradução, adaptação cultural e validação da escala Moorong Self-Efficacy Scale (MSES) para o português no Brasil = : Translation, cultural adaptation and validation of Moorong Self-Efficacy Scale (MSES) into Brazilian Portuguese

Universidade Estadual de Campinas . Faculdade de Educação Física

Characterisation of chronic lateral epicondylalgia using the McGill pain questionnaire, visual analog scales, and quantitative sensory tests

Aims: To characterise chronic lateral epicondylalgia using the McGill Pain Questionnaire, Visual Analog Scales for pain and function, and Quantitative Sensory Tests; and to examine the relationship between these tests in a population with chronic lateral epicondylalgia. Method: Fifty-six patients (29 female, 27 male) diagnosed with unilateral lateral epicondylalgia of 18.7 months (mean) duration (range 1-300), with a mean age of 50.7 years (range 27-73) participated in this study. Each participant underwent assessment with the McGill Pain Questionnaire (MPQ), Visual Analog Scales (VAS) for pain and function. and Quantitative Sensory Tests (QST) including thermal and pressure pain thresholds, pain free grip strength, and neuromeningeal tissue testing via the upper limb tension test 2b (ULTT 2b). Results: Moderate correlation (r = .338-.514, p = .000-.013) was found between all indices of the MPQ and VAS for pain experienced in the previous 24 hours and week. Thermal pain threshold was found to be significantly higher in males. A significant poor to moderate correlation was found between the Pain Rating Index (PRI) in the sensory category of the MPQ and ULTT2b scores (r = .353, p = .038). There was no other significant correlation between MPQ and QST data. Pain free grip strength was poorly yet significantly correlated with duration of pathology (r = 318, p = .038). Conclusion: The findings of this study are in agreement with others (Melzack and Katz, 1994) regarding the multidimensional nature of pain, in a condition conventionally conceived as a musculoskeletal pain state. The findings also suggest that utilisation of only one pain measurement tool is unlikely to provide a thorough clinical picture of pain experienced with chronic lateral epicondylalgia.

Infestation of Aedes aegypti estimated by oviposition traps in Brazil

OBJECTIVE: To assess infestation levels of Aedes aegypti using the oviposition trap (ovitrap) method and to compare these results with data obtained with the use of indices traditionally applied in public programs aimed at fighting this vector. METHODS: Nine sentinel areas in Northeastern, Brazil, were assessed and infestation levels were measured for a nine-month period. Egg density and container indices were estimated and compared with previous results found using the house index and Breteau index. RESULTS: The results indicated that the area studied was infested with this vector during the entire study period and that the infestation was widespread in all areas. Different results were found with the different indices studied. There were areas in which the house index and the Breteau index were negative or close to zero, whereas the container index for the same area was 11% and the egg density index was 8.3%. CONCLUSIONS: The container and egg density indices allow better assessment of infestation rates in a city than the conventionally used indices (house index and Breteau index). At lower operational costs and easier standardization, these indices can be applied as a measurement tool for assessing infestation rates during entomological surveillance in programs to fight Aedes aegypti.

Análise das determinantes da e-lealdade no comércio eletrónico

Objetivo – O objetivo deste trabalho é analisar e medir os determinantes da e-lealdade de um cliente no comércio eletrónico em Portugal. Metodologia – Foi realizado um estudo quantitativo empírico confirmatório e explicativo, a partir da identificação de um modelo teórico, suportado pelo levantamento bibliográfico sobre variáveis latentes, suscetível de investigar as relações entre os determinantes da e-lealdade. Os dados foram recolhidos através de um instrumento de medida, disponível online, o qual, permitiu obter uma amostra válida de 394 respondentes. As hipóteses foram testadas através de um modelo de equações estruturais. Resultados e conclusões – Estudaram-se e comprovaram-se a maioria das relações previstas e hipóteses, nomeadamente, a relação positiva das várias dimensões da e-confiança, e-satisfação e da e-qualidade de serviço na e-lealdade. A e-satisfação e a e-qualidade de serviço apresentam, também, um contributo interessante para a e-confiança que os consumidores têm nos produtos/serviços online. Quanto à e-satisfação dos consumidores foi possível verificar que a mesma apresenta uma variação, de acordo com a e-qualidade de serviço e a e-confiança, por parte dos consumidores online. Foi cumprida a validade convergente e discriminante das escalas de medida e a boa qualidade psicométrica das variáveis. Estas evidenciaram bons níveis de correlação e capacidades preditivas. Limitações/implicações – Os resultados obtidos precisam ser analisados com toda a precaução, não podendo ser objeto de generalizações, face ao uso de uma amostra de conveniência. O facto de os inquiridos avaliarem um website que estão já familiarizados pode constituir uma outra limitação. A ausência de estudos nacionais homólogos teve algumas implicações na discussão dos resultados. Originalidade/valor – O principal contributo deste estudo é constituir o primeiro realizado em Portugal, à data, onde se investigou e estimou um modelo proposto sobre os determinantes e antecedentes da e-lealdade no comércio eletrónico.

Development and psychometric properties of ECPICID-AVC to measure informal caregivers’ skills when caring for older stroke survivors at home

Introduction: Informal caregivers provide a significant part of the total care needed by dependent older people poststroke. Although informal care is often the preferred option of those who provide and those who receive informal care, informal caregivers often report lack of preparation to take care of older dependent people. This article outlines the development and psychometric testing of informal caregivers’ skills when providing care to older people after a stroke – ECPICID-AVC. Design: Prospective psychometric instrument validation study. Methods: Eleven experts participated in a focus group in order to delineate, develop and validate the instrument. Data were gathered among adult informal caregivers (n = 186) living in the community in Northern Portugal from August 2013 to January 2014. Results: The 32-item scale describes several aspects of informal caregiver’s skills. The scale has eight factors: skill to feed/hydrate by nasogastric feeding, skill to assist the person in personal hygiene, skill to assist the person for transferring, skill to assist the person for positioning, skill to provide technical aids, skill to assist the person to use the toilet, skill to feed/hydrate and skill to provide technical aids for dressing/undressing. Analysis demonstrated adequate internal consistency (Cronbach’s alpha = 0.83) and good temporal stability 0.988 (0.984–0.991). Conclusion: The psychometric properties of the measurement tool showed acceptable results allowing its implementation in clinical practice by the nursing community staff for evaluating practical skills in informal caregivers when providing care to older stroke survivors living at home.

Suorituskyvyn menestyksellinen ohjaaminen organisaatiossa

Henkilöstö on yrityksen yksi tärkeimmistä menestystekijöistä ja siksi on tärkeää, että työntekijät ovat sitoutuneita, motivoituneita ja toimivat tehokkaasti. Työn tavoitteena on kehittää organisaatioiden käyttöön suorituskyvyn menestyksellisen ohjaamisen työkalu, jolla voidaan mitata työmotivaation ja toiminnan tehokkuuden taustalla olevia tekijöitä. Kirjallisuudesta, aiemmista tutkimuksista ja haastatteluista selvisi viisi osa-aluetta, jotka vaikuttavat positiivisesti henkilöstön toiminnan tehokkuuteen, työmotivaation ja sitoutumiseen. Osa-alueet ovat tavoitteiden asettaminen, viestintä, henkilöstön vaikutusmahdollisuudet, palkitseminen ja motivointi sekä koulutukseen ja työympäristöön liittyvät tekijät. Jokaisen osa-alueen alle on kerätty kysymyksiä, jotka ovat jaettu kahteen osaan: avainkysymykset ja omavalinnaiset kysymykset. Avainkysymykset ovat sellaisia, joita suositellaan otettavaksi mukaan mittaukseen ja omavalinnaisten kysymysten valinta jää organisaation itsensä päätettäväksi. Näin saadaan organisaatioille mahdollisuus räätälöidä työkalu tarpeisiinsa ja strategiaan sopiviksi. Tutkimukseen empiirinen aineisto kerättiin haastattelemalla. Osallistuneista organisaatioista kaksi oli julkiselta sektorilta ja kuusi yksityiseltä sektorilta. Yksityisen sektorin yritykset koostuvat pienistä, keskisuurista ja suurista yrityksistä. Haastatteluilla kerättiin tietoa työkalun toteutusta ja sisältöä varten. SUMO-kartoituksesta saatuja mittaustuloksia organisaatio voi hyödyntää monella eri tavalla. Esimerkiksi organisaatio voi nähdä osa-alueiden ja toiminnan tehokkuuden kehitystarpeita sekä kuinka henkilöstön toimintaa voidaan tehostaa. Suorituskyvyn mittausjärjestelmän käytöllä on myös positiivisia vaikutuksia mittausosa-alueisiin.

Suorituskyvyn menestyksellinen ohjaaminen organisaatiossa

Henkilöstö on yrityksen yksi tärkeimmistä menestystekijöistä ja siksi on tärkeää, että työntekijät ovat sitoutuneita, motivoituneita ja toimivat tehokkaasti. Työn tavoitteena on kehittää organisaatioiden käyttöön suorituskyvyn menestyksellisen ohjaamisen työkalu, jolla voidaan mitata työmotivaation ja toiminnan tehokkuuden taustalla olevia tekijöitä. Kirjallisuudesta, aiemmista tutkimuksista ja haastatteluista selvisi viisi osa-aluetta, jotka vaikuttavat positiivisesti henkilöstön toiminnan tehokkuuteen, työmotivaation ja sitoutumiseen. Osa-alueet ovat tavoitteiden asettaminen, viestintä, henkilöstön vaikutusmahdollisuudet, palkitseminen ja motivointi sekä koulutukseen ja työympäristöön liittyvät tekijät. Jokaisen osa-alueen alle on kerätty kysymyksiä, jotka ovat jaettu kahteen osaan: avainkysymykset ja omavalinnaiset kysymykset. Avainkysymykset ovat sellaisia, joita suositellaan otettavaksi mukaan mittaukseen ja omavalinnaisten kysymysten valinta jää organisaation itsensä päätettäväksi. Näin saadaan organisaatioille mahdollisuus räätälöidä työkalu tarpeisiinsa ja strategiaan sopiviksi. Tutkimukseen empiirinen aineisto kerättiin haastattelemalla. Osallistuneista organisaatioista kaksi oli julkiselta sektorilta ja kuusi yksityiseltä sektorilta. Yksityisen sektorin yritykset koostuvat pienistä, keskisuurista ja suurista yrityksistä. Haastatteluilla kerättiin tietoa työkalun toteutusta ja sisältöä varten. SUMO-kartoituksesta saatuja mittaustuloksia organisaatio voi hyödyntää monella eri tavalla. Esimerkiksi organisaatio voi nähdä osa-alueiden ja toiminnan tehokkuuden kehitystarpeita sekä kuinka henkilöstön toimintaa voidaan tehostaa. Suorituskyvyn mittausjärjestelmän käytöllä on myös positiivisia vaikutuksia mittausosa-alueisiin.

Modeling and measuring organizational renewal capability

Globalization and new information technologies mean that organizations have to face world-wide competition in rapidly transforming, unpredictable environments, and thus the ability to constantly generate novel and improved products, services and processes has become quintessential for organizational success. Performance in turbulent environments is, above all, influenced by the organization's capability for renewal. Renewal capability consists of the ability of the organization to replicate, adapt, develop and change its assets, capabilities and strategies. An organization with a high renewal capability can sustain its current success factors while at the same time building new strengths for the future. This capability does not only mean that the organization is able to respond to today's challenges and to keep up with the changes in its environment, but also that it can actas a forerunner by creating innovations, both at the tactical and strategic levels of operation and thereby change the rules of the market. However, even though it is widely agreed that the dynamic capability for continuous learning, development and renewal is a major source of competitive advantage, there is no widely shared view on how organizational renewal capability should be defined, and the field is characterized by a plethora of concepts and definitions. Furthermore,there is a lack of methods for systematically assessing organizational renewal capability. The dissertation aims to bridge these gaps in the existing research by constructing an integrative theoretical framework for organizational renewal capability and by presenting a method for modeling and measuring this capability. The viability of the measurement tool is demonstrated in several contexts, andthe framework is also applied to assess renewal in inter-organizational networks. In this dissertation, organizational renewal capability is examined by drawing on three complimentary theoretical perspectives: knowledge management, strategic management and intellectual capital. The knowledge management perspective considers knowledge as inherently social and activity-based, and focuses on the organizational processes associated with its application and development. Within this framework, organizational renewal capability is understood as the capacity for flexible knowledge integration and creation. The strategic management perspective, on the other hand, approaches knowledge in organizations from the standpoint of its implications for the creation of competitive advantage. In this approach, organizational renewal is framed as the dynamic capability of firms. The intellectual capital perspective is focused on exploring how intangible assets can be measured, reported and communicated. From this vantage point, renewal capability is comprehended as the dynamic dimension of intellectual capital, which consists of the capability to maintain, modify and create knowledge assets. Each of the perspectives significantly contributes to the understanding of organizationalrenewal capability, and the integrative approach presented in this dissertationcontributes to the individual perspectives as well as to the understanding of organizational renewal capability as a whole.

Development of Customer Satisfaction Models for Electronics Engineering Company

Diplomityön tarkoituksena oli luoda ja kehittää kaksi asiakastyytyväisyysmallia asiakastyytyväisyyden mittaamisen aloittamiseksi ja toteuttamiseksi kohdeyrityksessä. Työ pohjautuu nykyisten tyytyväisyysprosessien analysointiin sekä työn teoriaosaan, joka käsittelee yksityiskohtaisesti niitä asioita, joita asiakastyytyväisyyden mittaamisessa ja prosessissa tulisi huomioida. Työssä tehdyn mallien tarkoituksen on auttaa kohdeyritystä hyödyntämään asiakastyytyväisyysmittauksen tuloksia paremmin liiketoiminnassa, sekä asiakkaiden keskuudessa. Työn yhtenä tavoitteena oli myös sopivan mittaustyökalun löytäminen ja suositteleminen kohdeyritykselle.Teorian ja analysoinnin pohjalta luotiin molemmat asiakastyytyväisyysmallit vastamaan kohdeyksiköiden tarpeita. Kun ulkoiset seikat, kuten mittaustavat, mittausinstrumentit, kyselylomakkeet ja vastaajaryhmät oli määritelty, keskityttiin tulosten analysointiin ja hyödyntämiseen, mikä korostui asiakassuuntautuneessa organisaatiossa. Työssä pohdittiin myös yhtenäisen asiakastyytyväisyysprosessin merkitystä ja etuja kohdeyrityksessä.

Suorituskyvyn analysointi ja mittaaminen julkisella sektorilla

Suorituskyvyn mittaamiselle ja seurannalle on nykyisin laajaa tarvetta myös julkisella sektorilla. Tutkimuksen tarkoituksena oli kehittää soveltuvia suorituskykyä kuvaavia mittareita ja rakentaa niistä käyttökelpoinen suorituskyvyn analysointijärjestelmä julkisen sektorin käyttöön. Ensisijaisena lähtökohtana olivat fyysiset mittarit, koska ne soveltuvat paremmin julkisen sektorin toimintaympäristöön.Tutkimuksen teoriaosassa esitetään joitakin suorituskyvyn analysointijärjestelmiä. Julkiselle sektorille soveliaina viitekehyksinä esitellään yleisellä tasolla balanced scorecard, suorituskykypyramidi, benchmarking, dynaaminen suorituskyvyn mittausjärjestelmä, laatupalkintokriteeristö, SAKE-sovellus ja suorituskykymatriisi.Työssä paneudutaan melko laajalti tekijöihin, joilla on voimakas vaikutus suorituskykyyn. Tällaisia tekijöitä ovat laatuasiat, tuottavuus ja organisaation kilpailukyvykkyys.Tutkimuksen käytännön osassa rakennettiin suorituskyvyn analysointi- ja mittausjärjestelmä. Ensin määriteltiin mittausjärjestelmään soveliaat suorituskyvyn osa-alueet ja seuraavaksi mittarit. Taloudellisia mittareita kehitettiin vain muutama, sillä pääpaino mittarien kehittelyssä olivat ei-taloudelliset mittarit. Mittaristo auttaa organisaatiota mittaamaan sen tilannetta matkalla jatkuvan parantamisen tiellä.