Interface state mapping in a Schottky barrier of the organic semiconductor terrylene

In this work we quantitatively map interface states in energy in a Schottky barrier between aluminum and the vacuum sublimed organic semiconductor terrylene. The density map of these interface states was extracted from the, admittance spectroscopy data. They revealed an interface state density of 2 x 10(12). cm(-2)eV(-1) close to the valence band which decreases slightly towards midgap. Additional do measurements show that the semiconductor bulk activation energy is 0.33 eV which may correspond to an acceptor level. (C) 2002 Elsevier Science B.V. All rights reserved.

The influence of off-screen landmarks on user orientation

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

FDOT District Six Pedestrian Safety Web GIS Application

A group of four applications including Top 20 Pedestrian Crash Locations: This application is designed to display top 20 pedestrian crash locations into both map- view and detailed information view. FDOT Crash Reporting Tool: This application is designed to simplify the usage and sharing of CAR data. The application can load raw data from CAR and display it into a web map interface. FDOT Online Document Portal: This application is designed for FDOT project managers to be able to share and manage documents through a user friendly, GIS enable web interface GIS Data Collection for Pedestrian Safety Tool: FIU-GIS Center was responsible for data collection and processing work for the project of Pedestrian Safety Tool Project. The outcome of this task is present by a simple web-GIS application design to host GIS by projects.

Using visual spatial search interface for WWW applications

Most Internet search engines are keyword-based. They are not efficient for the queries where geographical location is important, such as finding hotels within an area or close to a place of interest. A natural interface for spatial searching is a map, which can be used not only to display locations of search results but also to assist forming search conditions. A map-based search engine requires a well-designed visual interface that is intuitive to use yet flexible and expressive enough to support various types of spatial queries as well as aspatial queries. Similar to hyperlinks for text and images in an HTML page, spatial objects in a map should support hyperlinks. Such an interface needs to be scalable with the size of the geographical regions and the number of websites it covers. In spite of handling typically a very large amount of spatial data, a map-based search interface should meet the expectation of fast response time for interactive applications. In this paper we discuss general requirements and the design for a new map-based web search interface, focusing on integration with the WWW and visual spatial query interface. A number of current and future research issues are discussed, and a prototype for the University of Queensland is presented. (C) 2001 Published by Elsevier Science Ltd.

Matkapuhelinverkon MAP-protokollatoteutus älyverkkopalveluiden ohjauspisteeseen

Työssä esitellään yleiseurooppalaisen GSM-matkapuhelinjärjestelmän verkkoelementtejä ja perehdytään niiden väliseen standardoituun merkinantoprotokollaan. Lisäksi tarkastellaan protokollan lyhytsanomien välitykseen liittyviä operaatioita ja niissä tapahtunutta kehitystä standardoinnin eri vaiheissa. Tavoitteena oli toteuttaa GSM-matkapuhelinverkon merkinantoprotokollaan perustuva ohjelma, jonka tehtävänä on välittää lyhytsanomia matkapuhelin- ja lyhytsanomakeskuksen välillä. Matkapuhelimeen päättyvän lyhytsanoman välitykseen liittyy lisäksi reititystiedon hakeminen vastaanottajan kotirekisteristä. Toteutuksessa on ohjelmointirajapinta, joka helpottaa matkapuhelinverkon uusien palvelusovellusten kehittämistä. Toteutus testattiin standardoituja testitapauksia soveltaen. Yhdenmukaisuustestauksessa käytettiin apuna merkinantoanalysaattoria. Testauksessa tarkastettiin, että protokolla toimii loogisesti oikein. Suorituskykyä ei ole voitu testata todellisessa testiympäristössä, mutta ohjelmallisesti toteutettujen simulaattoreiden avulla on saatu hyviä tuloksia.

Geospatial approach for defining the Wildland-Urban Interface in the Alpine environment

Problems related to fire hazard and fire management have become in recent decades one of the most relevant issues in the Wildland-Urban Interface (WUI), that is the area where human infrastructures meet or intermingle with natural vegetation. In this paper we develop a robust geospatial method for defining and mapping the WUI in the Alpine environment, where most interactions between infrastructures and wildland vegetation concern the fire ignition through human activities, whereas no significant threats exist for infrastructures due to contact with burning vegetation. We used the three Alpine Swiss cantons of Ticino, Valais and Grisons as the study area. The features representing anthropogenic infrastructures (urban or infrastructural components of the WUI) as well as forest cover related features (wildland component of the WUI) were selected from the Swiss Topographic Landscape Model (TLM3D). Georeferenced forest fire occurrences derived from the WSL Swissfire database were used to define suitable WUI interface distances. The Random Forest algorithm was applied to estimate the importance of predictor variables to fire ignition occurrence. This revealed that buildings and drivable roads are the most relevant anthropogenic components with respect to fire ignition. We consequently defined the combination of drivable roads and easily accessible (i.e. 100 m from the next drivable road) buildings as the WUI-relevant infrastructural component. For the definition of the interface (buffer) distance between WUI infrastructural and wildland components, we computed the empirical cumulative distribution functions (ECDF) of the percentage of ignition points (observed and simulated) arising at increasing distances from the selected infrastructures. The ECDF facilitates the calculation of both the distance at which a given percentage of ignition points occurred and, in turn, the amount of forest area covered at a given distance. Finally, we developed a GIS ModelBuilder routine to map the WUI for the selected buffer distance. The approach was found to be reproducible, robust (based on statistical analyses for evaluating parameters) and flexible (buffer distances depending on the targeted final area covered) so that fire managers may use it to detect WUI according to their specific priorities.

Ka-Map: an interactive web-mapping application

ka-Map ("ka" as in ka-boom!) is an open source project that is aimed at providing a javascript API for developing highly interactive web-mapping interfaces using features available in modern web browsers. ka-Map currently has a number of interesting features. It sports the usual array of user interface elements such as: interactive, continuous panning without reloading the page; keyboard navigation options (zooming, panning); zooming to pre-set scales; interactive scalebar, legend and keymap support; optional layer control on client side; server side tile caching

Brain computer interface control via functional connectivity dynamics

The dynamics of inter-regional communication within the brain during cognitive processing – referred to as functional connectivity – are investigated as a control feature for a brain computer interface. EMDPL is used to map phase synchronization levels between all channel pair combinations in the EEG. This results in complex networks of channel connectivity at all time–frequency locations. The mean clustering coefficient is then used as a descriptive feature encapsulating information about inter-channel connectivity. Hidden Markov models are applied to characterize and classify dynamics of the resulting complex networks. Highly accurate levels of classification are achieved when this technique is applied to classify EEG recorded during real and imagined single finger taps. These results are compared to traditional features used in the classification of a finger tap BCI demonstrating that functional connectivity dynamics provide additional information and improved BCI control accuracies.

A genetic linkage map of an apple rootstock progeny anchored to the Malus genome sequence

An apple rootstock progeny raised from the cross between the very dwarfing ‘M.27’ and the more vigorous ‘M.116’ (‘M.M.106’ × ‘M.27’) was used for the construction of a linkage map comprising a total of 324 loci: 252 previously mapped SSRs, 71 newly characterised or previously unmapped SSR loci (including 36 amplified by 33 out of the 35 novel markers reported here), and the self-incompatibility locus. The map spanned the 17 linkage groups (LG) expected for apple covering a genetic distance of 1,229.5 cM, an estimated 91% of the Malus genome. Linkage groups were well populated and, although marker density ranged from 2.3 to 6.2 cM/SSR, just 15 gaps of more than 15 cM were observed. Moreover, only 17.5% of markers displayed segregation distortion and, unsurprisingly in a semi-compatible backcross, distortion was particularly pronounced surrounding the self-incompatibility locus (S) at the bottom of LG17. DNA sequences of 273 SSR markers and the S locus, representing a total of 314 loci in this investigation, were used to anchor to the ‘Golden Delicious’ genome sequence. More than 260 of these loci were located on the expected pseudo-chromosome on the ‘Golden Delicious’ genome or on its homeologous pseudo-chromosome. In total, 282.4 Mbp of sequence from 142 genome sequence scaffolds of the Malus genome were anchored to the ‘M.27’ × ‘M.116’ map, providing an interface between the marker data and the underlying genome sequence. This will be exploited for the identification of genes responsible for traits of agronomic importance such as dwarfing and water use efficiency.

Mapeamento de uma interface separando dois meios homogêneos através da reconstituição gravimétrica compacta: aplicação a dados do LEPLAC-IV

O problema do mapeamento de uma interface separando dois meios homogêneos tem sido tradicionalmente resolvido através da continuação para baixo da anomalia gravimétrica observada. Este procedimento requer a utilização de um filtro passa-baixa ou de um parâmetro de amortecimento, que tendem a diminuir a resolução do relevo estimado da interface. Além disso, o uso da continuação para baixo implica supor (desnecessariamente) que a interface é uma superfície harmônica. Desta forma, a utilização da continuação para baixo é restrita a interfaces que apresentam um relevo suave relativamente à sua profundidade média. As restrições impostas pela continuação para baixo do campo gravimétrico são reduzidas na técnica de inversão proposta para este estudo, cujo objetivo é mapear a interface crosta-manto baseada na incorporação de informações a priori sobre o mínimo momento de inércia da fonte causadora, em relação a um eixo de concentração de massa pré-estabelecido e coincidente com o topo da fonte anômala. Além da introdução de informações sobre o mínimo momento, foi incluída também a possibilidade de haver variação lateral e em profundidade de densidade em setores previamente estabelecidos, o que permite estender a aplicação desta técnica a situações geológicas mais complexas que envolvam a reconstituição de corpos justapostos, que sejam de diferentes naturezas, tais como aqueles presentes em zonas de transição crustal. O método de inversão apresentado foi avaliado em testes usando dados sintéticos e os resultados obtidos mostraram a eficiência desta técnica em recuperar corpos alongados horizontalmente, que apresentem como topo ou base, interfaces arbitrárias a serem mapeadas. Foi também constatada a eficácia do método em reconstituir corpos que comportem variação lateral de densidade que pudessem retratar situações em que se deseja investigar a natureza do embasamento em regiões de transição crustal. Com base nos resultados destes testes, a técnica foi então empregada na inversão gravimétrica de cinco perfis do LEPLAC IV que cruzam a região oceânica adjacente à margem continental sudeste brasileira. Os resultados desta aplicação permitiram inferir a natureza dos corpos que constituem o arcabouço estrutural da região onde encontram-se inseridas a Dorsal de São Paulo e a Zona de Fratura de Porto Alegre, assim como mapear a Moho subjacente.

CFD modeling of two-phase boiling flows in the slug flow regime with an interface capturing technique

The objective of this thesis was to improve the commercial CFD software Ansys Fluent to obtain a tool able to perform accurate simulations of flow boiling in the slug flow regime. The achievement of a reliable numerical framework allows a better understanding of the bubble and flow dynamics induced by the evaporation and makes possible the prediction of the wall heat transfer trends. In order to save computational time, the flow is modeled with an axisymmetrical formulation. Vapor and liquid phases are treated as incompressible and in laminar flow. By means of a single fluid approach, the flow equations are written as for a single phase flow, but discontinuities at the interface and interfacial effects need to be accounted for and discretized properly. Ansys Fluent provides a Volume Of Fluid technique to advect the interface and to map the discontinuous fluid properties throughout the flow domain. The interfacial effects are dominant in the boiling slug flow and the accuracy of their estimation is fundamental for the reliability of the solver. Self-implemented functions, developed ad-hoc, are introduced within the numerical code to compute the surface tension force and the rates of mass and energy exchange at the interface related to the evaporation. Several validation benchmarks assess the better performances of the improved software. Various adiabatic configurations are simulated in order to test the capability of the numerical framework in modeling actual flows and the comparison with experimental results is very positive. The simulation of a single evaporating bubble underlines the dominant effect on the global heat transfer rate of the local transient heat convection in the liquid after the bubble transit. The simulation of multiple evaporating bubbles flowing in sequence shows that their mutual influence can strongly enhance the heat transfer coefficient, up to twice the single phase flow value.

Using Micro-Gravity Techniques to Map Alluvium Thickness and Pleistocene Location of the West Branch of the Susquehanna River Near Muncy, Pennsylvania

Laurentide glaciation during the early Pleistocene (~970 ka) dammed the southeast-flowing West Branch of the Susquehanna River (WBSR), scouring bedrock and creating 100-km-long glacial Lake Lesley near the Great Bend at Muncy, Pennsylvania (Ramage et al., 1998). Local drill logs and well data indicate that subsequent paleo-outwash floods and modern fluvial processes have deposited as much as 30 meters of alluvium in this area, but little is known about the valley fill architecture and the bedrock-alluvium interface. By gaining a greater understanding of the bedrock-alluvium interface the project will not only supplement existing depth to bedrock information, but also provide information pertinent to the evolution of the Muncy Valley landscape. This project determined if variations in the thickness of the valley fill were detectable using micro-gravity techniques to map the bedrock-alluvium interface. The gravity method was deemed appropriate due to scale of the study area (~30 km2), ease of operation by a single person, and the available geophysical equipment. A LaCoste and Romberg Gravitron unit was used to collect gravitational field readings at 49 locations over 5 transects across the Muncy Creek and Susquehanna River valleys (approximately 30 km2), with at least two gravity base stations per transect. Precise latitude, longitude and ground surface elevation at each location were measured using an OPUS corrected Trimble RTK-GPS unit. Base stations were chosen based on ease of access due to the necessity of repeat measurements. Gravity measurement locations were selected and marked to provide easy access and repeat measurements. The gravimeter was returned to a base station within every two hours and a looping procedure was used to determine drift and maximize confidence in the gravity measurements. A two-minute calibration reading at each station was used to minimize any tares in the data. The Gravitron digitally recorded finite impulse response filtered gravity measurements every 20 seconds at each station. A measurement period of 15 minutes was used for each base station occupation and a minimum of 5 minutes at all other locations. Longer or multiple measurements were utilized at some sites if drift or other externalities (i.e. train or truck traffic) were effecting readings. Average, median, standard deviation and 95% confidence interval were calculated for each station. Tidal, drift, latitude, free-air, Bouguer and terrain corrections were then applied. The results show that the gravitational field decreases as alluvium thickness increases across the axes of the Susquehanna River and Muncy Creek valleys. However, the location of the gravity low does not correspond with the present-day location of the West Branch of the Susquehanna River (WBSR), suggesting that the WBSR may have been constrained along Bald Eagle Mountain by a glacial lobe originating from the Muncy Creek Valley to the northeast. Using a 3-D inversion model, the topography of the bedrock-alluvium interface was determined over the extent of the study area using a density contrast of -0.8 g/cm3. Our results are consistent with the bedrock geometry of the area, and provide a low-cost, non-invasive and efficient method for exploring the subsurface and for supplementing existing well data.

Code and readme of a MATLAB-based graphical user interface program for computing functionals of the geopotential

We present a novel graphical user interface program GrafLab (GRAvity Field LABoratory) for spherical harmonic synthesis (SHS) created in MATLAB®. This program allows to comfortably compute 38 various functionals of the geopotential up to ultra-high degrees and orders of spherical harmonic expansion. For the most difficult part of the SHS, namely the evaluation of the fully normalized associated Legendre functions (fnALFs), we used three different approaches according to required maximum degree: (i) the standard forward column method (up to maximum degree 1800, in some cases up to degree 2190); (ii) the modified forward column method combined with Horner's scheme (up to maximum degree 2700); (iii) the extended-range arithmetic (up to an arbitrary maximum degree). For the maximum degree 2190, the SHS with fnALFs evaluated using the extended-range arithmetic approach takes only approximately 2-3 times longer than its standard arithmetic counterpart, i.e. the standard forward column method. In the GrafLab, the functionals of the geopotential can be evaluated on a regular grid or point-wise, while the input coordinates can either be read from a data file or entered manually. For the computation on a regular grid we decided to apply the lumped coefficients approach due to significant time-efficiency of this method. Furthermore, if a full variance-covariance matrix of spherical harmonic coefficients is available, it is possible to compute the commission errors of the functionals. When computing on a regular grid, the output functionals or their commission errors may be depicted on a map using automatically selected cartographic projection.

Vídeo-Mapa: uma interface de geovisualização multimídia aplicada a transportes e meio ambiente.

A presente tese propõe uma metodologia de vídeo-mapeamento móvel georreferenciado a partir do desenvolvimento de protótipos que utilizam uma Interface de Geovisualização Multimídia para sincronizar o registro (em vídeo) de um local ou evento de interesse com a rota percorrida pelo veículo de inspeção (sobre mapa ou imagem), através da coleta de dados por sensores móveis: câmera digital, microfone, receptor GNSS e bússola digital. A interface permite a integração desses sensores com os atuais serviços de mapas digitais disponíveis na web. Sistemas como esse melhoram significativamente as análises temporais, a gestão e a tomada de decisão. A interface proposta e desenvolvida no presente trabalho é útil para muitas aplicações como ferramenta de monitoramento e inventário. Esta interface pode ser entendida como o componente visual de um sistema de mapeamento móvel ou como um sistema cartográfico alternativo ou complementar, para aplicações em que a precisão geométrica do receptor GNSS, na modalidade de navegação, é suficiente e sua acessibilidade, um fator competitivo. As aplicações desenvolvidas no presente trabalho foram duas: um sistema de monitoramento e inventário de placas de sinalização viária e um sistema de monitoramento de cheias/secas e inventário de propriedades na borda de reservatórios de hidroelétricas, ambos em pleno funcionamento.

Design and Development of Geographical Information System (GIS) Map for Nuclear Waste Streams

A nuclear waste stream is the complete flow of waste material from origin to treatment facility to final disposal. The objective of this study was to design and develop a Geographic Information Systems (GIS) module using Google Application Programming Interface (API) for better visualization of nuclear waste streams that will identify and display various nuclear waste stream parameters. A proper display of parameters would enable managers at Department of Energy waste sites to visualize information for proper planning of waste transport. The study also developed an algorithm using quadratic Bézier curve to make the map more understandable and usable. Microsoft Visual Studio 2012 and Microsoft SQL Server 2012 were used for the implementation of the project. The study has shown that the combination of several technologies can successfully provide dynamic mapping functionality. Future work should explore various Google Maps API functionalities to further enhance the visualization of nuclear waste streams.