Toward including the effect of manufacturing processes in the pre-estimated losses of the switched reluctance motor

The estimation of losses plays a key role in the process of building any electrical machine. How to estimate those losses while designing any machine; by obtaining the characteristic of the electrical steel from the catalogue and calculate the losses. However, this way is inaccurate since the electrical steel performs several manufacturing processes during the process of building any machine, which affects directly the magnetic property of the electrical steel and accordingly the characteristic of the electrical steel will be affected. That means the B–H curve of the steel that was obtained from the catalogue will be changed. Moreover, during loading and rotating the machine, some important changes occur to the B–H characteristic of the electrical steel such as the stress on the laminated iron. Accordingly, the pre-estimated losses are completely far from the actual losses because they were estimated based on the data of the electrical steel obtained from the catalogue. So in order to estimate the losses precisely significant factors of the manufacturing processes must be included. The paper introduces the systematic estimation of the losses including the effect of one of the manufacturing factors. Similarly, any other manufacturing factor can be included in the pre-designed losses estimations.

Effect of microstructure on material removal mechanisms in nano/micro grinding of tungsten carbide mould inserts

Nano/micro grinding of tungsten carbide (WC) mould inserts was performed. A form accuracy of 〜200nm (in PV) and a surface roughness of 〜7nm were achieved. Nanoindentation revealed that small chipping or cracking occurred even at a penetration depth of 38nm, which could hinder the further improvement of surface quality during grinding. It was found that when grinding was conducted at nanometric scale, the microstructure of the work material and the morphology of the WC grains should be taken into account to enable a fully ductile removal. Copyright 2005 by the Japan Society of Mechanical Engineers

The wage effect of an indexation clause: Evidence from Spanish manufacturing firms

An endogenous switching model of ex-ante wage changes under indexed and non-indexed settlements is estimated for the Spanish manufacturing sector using collective bargaining firm data for the 1984-1991 period. The likelihood of indexing the settlement is higher for nationwide unions than for other union groups within the works council and increases with the expected level of inflation. For wage change equations, a common structure for indexed and non-indexed settlements is strongly rejected, showing a source of nominal rigidity. For indexed contracts, the expected ex-ante total inflation coverage is nearly complete. It is also shown that workers pay a significant ex-ante wage change premium (differential) to obtain a cost of living allowance clause. However, the realised contingent compensation exceeds such a premium for all industries. Finally, important spillover effects in wage setting and the decision to index the settlement have been detected.

European luxury brands made in China: the effect of low-cost country manufacturing on brand image and purchase decisions

European luxury brands have an image of manufacturing their products in the same country where the brands originate. However, in the past years many luxury brands have shifted their manufacturing to countries outside Europe. China is now a common manufacturing country for European luxury brands despite the country’s poor image as a manufacturer. Chinese manufacturing is often associated with bad quality, bad labour conditions, mass production, and counterfeits. The image of China does not quite match the image luxury brands enjoy including characteristics such as high end quality, craftsmanship, details, design, or premium price. A negatively perceived country-of-manufacture may have an effect on a brand’s image and consumers’ purchase decisions. This thesis is focused on European luxury brands manufacturing in China, and how this effects the brand image and purchase decisions among luxury consumers. The empirical part of this thesis is based on focus group research, which is a popular method in the field of qualitative research. The main focus group is female luxury consumers in Finland. This main group has been divided into three categories: 1) the university students, 2) the young career women, 3) the experienced luxury consumers. This categorization has been done based on their different stages in luxury consumption. All in all, the empirical research consisted of 11 interviews and 29 participants. The main contribution of this thesis was that there is a difference between the opinions of the younger groups (university students and young career women) and the experienced luxury consumers when discussing the effect of country-of-manufacture on brand image and purchase decisions of luxury brands. The younger participants thought that manufacturing luxury products in China might affect the brand image, but their purchase decisions would not be that much affected by the country-of-origin. The experienced luxury consumers had quite a different view on the country-of-origin of luxury brands – they found it an important decisive factor prior making purchases. The majority of experienced luxury consumers would not buy luxury products made in China, and they would always check where these products are made in.

Failure Mode and Effect Analysis (FMEA) for confectionery manufacturing in developing countries: Turkish delight production as a case study

The Failure Mode and Effect Analysis (FMEA) was applied for risk assessment of confectionary manufacturing, in whichthe traditional methods and equipment were intensively used in the production. Potential failure modes and effects as well as their possible causes were identified in the process flow. Processing stages that involve intensive handling of food by workers had the highest risk priority numbers (RPN = 216 and 189), followed by chemical contamination risks in different stages of the process. The application of corrective actions substantially reduced the RPN (risk priority number) values. Therefore, the implementation of FMEA (The Failure Mode and Effect Analysis) model in confectionary manufacturing improved the safety and quality of the final products.

Knowledge effect on firm performance in manufacturing and service firms

This thesis seeks to examine the difference between manufacturing and service firms with respect to the effects of knowledge on performance, and the influence of market turbulence in this relationship. Empirical data, resulting from a survey, was collected from more than 1,206 firms, involving several sectors. Two samples were analyzed, one with 334 manufacturing and other with 509 service firms. The findings indicate no significant difference in the importance of knowledge on performance between these sectors in the absence of market turbulence: knowledge development (KD) has a stronger effect than culture of competitiveness (CC) on firm performance. However, under market turbulence, manufacturers differ from service providers. The positive effect of KD is enhanced, while the positive effect of CC remains the same for manufacturing firms. On the other hand, the positive effect of KD is diminished, while the positive effect of CC is enhanced for service firms. This supports the argument concerning differences in the nature of manufacturing and service industries. From a managerial point of view, results confirm the importance of knowledge, irrespective of firm sector or market turbulence. However, while industrial firms should center efforts on KD, service firms must find a balance where knowledge development (e.g. norms, processes, routines) does not impair their culture of competitiveness (e.g. learning, innovation, action). The thesis contributes to existing literature by proposing that: (1) the positive effect of knowledge on performance is confirmed; (2) under turbulent markets manufacturing and service firms have different responses concerning the influence of knowledge on performance; (3) a multidimensional performance construct based on cost, profitability, and growth is an interesting way to evaluate firm sustained competitive advantage, rather than one-dimensional constructs; (4) the CC x KD interaction, found relevant for supply chains in previous studies, is not supported for firms; (5) differences in unit of analysis, e.g. from supply chains to firms, result in different effects of KD and CC on firm performance; (6) existing scales can be improved with the addition of more diverse indicators, capturing a wider range of concepts (e.g. information transfer measurement); and (7) results from previous studies are supported for Brazilian firms, contributing for theory generalization.

The effect of direct taxes and other factors on money wage changes in U.S. manufacturing /

Cover title.

Dimensional control in precision manufacturing, as applied in production machining to effect higher production and lower unit costs.

Mode of access: Internet.

The effect of human resource management policies on organisational performance in Greek manufacturing

This paper investigates if HRM policies have an impact on organisational performance. The research is based on a sample of 178 organisations operating in the Greek manufacturing sector. The 'universalistic model’ of HRM is adopted to conduct the investigation. The results show strong support for the model, indicating that the HRM policies of recruitment, training, promotion, incentives, benefits, involvement, and health and safety are positively related with organisational performance. The study contributes to both HRM theory and has important messages for practitioners.

The effect of human resource management policies on organizational performance in Greek manufacturing firms

This article investigates if human resource management (HRM) policies have an impact on organizational performance in the Greek manufacturing context. The research is based on a sample of 178 firms. The "universalistic model" of HRM is adopted to conduct the investigation. The results show strong support for the model, indicating that the HRM policies of recruitment, training, promotion, incentives, benefits, involvement, and health and safety are positively related with organizational performance. The study both contributes to HRM theory and has important implications for practitioners. © 2007 Wiley Periodicals, Inc.

A dual definition for the factor content of trade and its effect on factor rewards in US manufacturing sector

We introduce a dual definition of the Factor Content of Trade (FCT) using the concept of the Equivalent Autarky Equilibrium. Estimating a symmetric normalized quadratic revenue function for the U.S. manufacturing sector between 1965 and 1991, we find that the FCT for capital is positive, while the FCT for skilled and unskilled labor is negative, suggesting that the Leontief Paradox is not present. Then the growth rate of the factor rewards is decomposed to the FCT, endowments, and technological change effects. We find that technological change is the most important determinant in explaining wage inequality between skilled and unskilled labor.

Influence of specimens' design and manufacturing process on microtensile bond strength to enamel: laboratory and FEA comparison

This study evaluated the effect of specimens' design and manufacturing process on microtensile bond strength, internal stress distributions (Finite Element Analysis - FEA) and specimens' integrity by means of Scanning Electron Microscopy (SEM) and Laser Scanning Confocal Microscopy (LCM). Excite was applied to flat enamel surface and a resin composite build-ups were made incrementally with 1-mm increments of Tetric Ceram. Teeth were cut using a diamond disc or a diamond wire, obtaining 0.8 mm² stick-shaped specimens, or were shaped with a Micro Specimen Former, obtaining dumbbell-shaped specimens (n = 10). Samples were randomly selected for SEM and LCM analysis. Remaining samples underwent microtensile test, and results were analyzed with ANOVA and Tukey test. FEA dumbbell-shaped model resulted in a more homogeneous stress distribution. Nonetheless, they failed under lower bond strengths (21.83 ± 5.44 MPa)c than stick-shaped specimens (sectioned with wire: 42.93 ± 4.77 MPaª; sectioned with disc: 36.62 ± 3.63 MPa b), due to geometric irregularities related to manufacturing process, as noted in microscopic analyzes. It could be concluded that stick-shaped, nontrimmed specimens, sectioned with diamond wire, are preferred for enamel specimens as they can be prepared in a less destructive, easier, and more precise way.

Toxicity-directed approach of polyester manufacturing industry wastewater provides useful information for conducting treatability studies

A broader characterization of industrial wastewaters, especially in respect to hazardous compounds and their potential toxicity, is often necessary in order to determine the best practical treatment (or pretreatment) technology available to reduce the discharge of harmful pollutants to the environment or publicly owned treatment works. Using a toxicity-directed approach, this paper sets the base for a rational treatability study of polyester resin manufacturing. Relevant physical and chemical characteristics were determined. Respirometry was used for toxicity reduction evaluation after physical and chemical effluent fractionation. Of all the procedures investigated, only air stripping was significantly effective in reducing wastewater toxicity. Air stripping in pH 7 reduced toxicity in 18.2%, while in pH 11 a toxicity reduction of 62.5% was observed. Results indicated that toxicants responsible for the most significant fraction of the effluent`s instantaneous toxic effect to unadapted activated sludge were organic compounds poorly or not volatilized in acid conditions. These results led to useful directions for conducting treatability studies which will be grounded on actual effluent properties rather than empirical or based on the rare specific data on this kind of industrial wastewater. (C) 2008 Elsevier B.V. All rights reserved.

Axial wedge effect in tilted hydrodynamic journal bearings

Hydrodynamic journal bearings are susceptible to static angular misalignment, resulting from improper assemblage, elastic and thermal distortion of the shaft and bearing housing, and also manufacturing errors. Several previous works on the theme, both theoretical and experimental, focused on the determination of the static properties of angular misaligned bearings. Although some reports show agreement between theoretical and experimental results, the increasingly severe operating conditions of hydrodynamic bearings (heavy loads and high rotational speeds) require more reliable theoretical formulations for the evaluation of the journal performance during the design process. The consideration of the angular misalignment in the derivation of the Reynolds equation is presented here in detail, showing that properly conducted geometric and magnitude-order analyses lead to the inclusion of an axial wedge effect term that influences the velocity and pressure fields in the lubricant film. Numerical results evidence that this axial wedge effect more significantly affects the hydrodynamic forces and static operational properties of tilted short journal bearings.