58 resultados para Malcom
Resumo:
General note: Title and date provided by Bettye Lane.
Resumo:
Objective Ankylosing spondylitis (AS) is a common inflammatory arthritis affecting primarily the axial skeleton. IL23R is genetically associated with AS. This study was undertaken to investigate and characterize the role of interleukin-23 (IL-23) signaling in AS pathogenesis. Methods The study population consisted of patients with active AS (n = 17), patients with psoriatic arthritis (n = 8), patients with rheumatoid arthritis, (n = 9), and healthy subjects (n = 20). IL-23 receptor (IL-23R) expression in T cells was determined in each subject group, and expression levels were compared. Results The proportion of IL-23R-expressing T cells in the periphery was 2-fold higher in AS patients than in healthy controls, specifically driven by a 3-fold increase in IL-23R-positive γ/δ T cells in AS patients. The proportions of CD4+ and CD8+ cells that were positive for IL-17 were unchanged. This increased IL-23R expression on γ/δ T cells was also associated with enhanced IL-17 secretion, with no observable IL-17 production from IL-23R-negative γ/δ T cells in AS patients. Furthermore, γ/δ T cells from AS patients were heavily skewed toward IL-17 production in response to stimulation with IL-23 and/or anti-CD3/CD28. Conclusion Recently, mouse models have shown IL-17-secreting γ/δ T cells to be pathogenic in infection and autoimmunity. Our data provide the first description of a potentially pathogenic role of these cells in a human autoimmune disease. Since IL-23 is a maturation and growth factor for IL-17-producing cells, increased IL-23R expression may regulate the function of this putative pathogenic γ/δ T cell population.
Resumo:
<正> 三、运动关节力学 运动关节(diarthrodial joint)的功能在于使动物能灵巧地运动肢体。译成力学术语就是:传递载荷,吸收冲击、振动,承受相当高的应力,且运动时摩擦系数很小。L.L.Malcom曾精细地测量过牛肱关节的摩擦系数,在正应力1—20kg/cm~2的范围内,动摩擦系数为0.0025—0.0040,而最好的工程材料的摩擦系数为0.01—0.05,整整差一个量级。
Resumo:
Sandwich panels with crushable foam cores have attracted significant interest for impulsive load mitigation. We describe a method for making a lightweight, energy absorbing, glass fiber composite sandwich structure and explore it is through thickness (out-of-plane) compressive response. The sandwich structure utilized corrugated composite cores constructed from delamination resistant 3D woven E-glass fiber textiles folded over triangular cross section prismatic closed cell, PVC foam inserts. The corrugated structure was stitched to 3D woven S2-glass fiber face sheets and infiltrated with a rubber toughened, impact resistant epoxy. The quasi-static compressive stress-strain response of the panels was experimentally investigated as a function of the strut width to length ratio and compared to micromechanical predictions. Slender struts failed by elastic (Euler) buckling which transitioned to plastic microbuckling as the strut aspect ratio increased. Good agreement was observed between experimental results and micromechanical predictions over the wide range of core densities investigated in the study.
Resumo:
This paper presents work in progress, to develop an efficient and economic way to directly produce Technetium 99metastable (99mTc) using low-energy cyclotrons. Its importance is well established and relates with the increased global trouble in delivering 99mTc to Nuclear Medicine Departments relying on this radioisotope. Since the present delivery strategy has clearly demonstrated its intrinsic limits, our group decided to follow a distinct approach that uses the broad distribution of the low energy cyclotrons and the accessibility of Molybdenum 100 (100Mo) as the Target material. This is indeed an important issue to consider, since the system here presented, named CYCLOTECH, it is not based on the use of Highly Enriched (or even Low Enriched) Uranium 235 (235U), so entirely complying with the actual international trends and directives concerning the use of this potential highly critical material. The production technique is based on the nuclear reaction 100Mo (p,2n) 99mTc whose production yields have already been documented. Until this moment two Patent requests have already been submitted (the first at the INPI, in Portugal, and the second at the USPTO, in the USA); others are being prepared for submission on a near future. The object of the CYCLOTECH system is to present 99mTc to Nuclear Medicine radiopharmacists in a routine, reliable and efficient manner that, remaining always flexible, entirely blends with established protocols. To facilitate workflow and Radiation Protection measures, it has been developed a Target Station that can be installed on most of the existing PET cyclotrons and that will tolerate up to 400 μA of beam by allowing the beam to strike the Target material at an adequately oblique angle. The Target Station permits the remote and automatic loading and discharge of the Targets from a carriage of 10 Target bodies. On other hand, several methods of Target material deposition and Target substrates are presented. The object was to create a cost effective means of depositing and intermediate the target material thickness (25 - 100μm) with a minimum of loss on a substrate that is able to easily transport the heat associated with high beam currents. Finally, the separation techniques presented are a combination of both physical and column chemistry. The object was to extract and deliver 99mTc in the identical form now in use in radiopharmacies worldwide. In addition, the Target material is recovered and can be recycled.
Resumo:
Introducción: Los factores de riesgo de la enfermedad cardiovascular (FRECV) pueden estar presentes desde la infancia y predicen la enfermedad cardiovascular del adulto. Objetivo: Evaluar la prevalencia de FRECV en niños de 3 a 17 años hijos de Enfermeras de la Fundación CardioInfantil - Instituto de cardiología (FCI). Métodos: Estudio de corte transversal analítico. Resultados: 118 niños, edad promedio 7,4 años, desviación estándar 3,86, la mayoría eutróficos 72,0%. Presentaron FRECV como malos hábitos alimenticios 89,0%, sedentarismo 78,8%, exposición a tabaco 19,5%, historia familiar de riesgo cardiovascular 16,1%, sobrepeso 15,3% y obesidad 12,7%. No se encontraron diferencias entre factores de riesgo entre niños y niñas.El sedentarismo en niños con sobrepeso u obesidad fue del 90,9% y en niños eutróficos del 36,5%. Los malos hábitos alimentarios en niños con sobrepeso u obesidad fueron 84,8% y en niños eutróficos 42,4%. Los adolescentes presentaron una mayor exposición a tabaco en comparación con los preescolares y escolares, al igual que una mayor proporción de malos hábitos alimenticios en comparación con ambos grupos. De la totalidad de la población de estudio, el 97,5% presentó al menos un FRECV, y el 42,4% 3 o más FRECV. La presencia de ≥3 FRECV fue mayor en obesos al compararlos con los niños en sobrepeso y eutróficos. Conclusiones: Los resultados del estudio indican que los niños de 3 a 17 años evaluados presentan una alta carga de FRECV, en especial en aquellos con sobrepeso y obesidad.
Resumo:
Este trabajo de grado es una recopilación bibliográfica de múltiples factores nacionales e internacionales que pueden explicar la emergencia y desarrollo de la política publica del salario mínimo en Colombia. Todo esto esta cubierto bajo la definición de política publica de Raúl Velasquez. La relevancia del trabajo esta en que se hace el estudio de un fenómeno económico desde el lado social.
Resumo:
Examina la relación entre los niveles de actividad física (AF) de forma objetiva, la condición física (CF) y el tiempo de exposición a pantallas en niños y adolescentes de Bogotá, Colombia.
Resumo:
La obra se encuentra dividida en dos partes. En la primera se analizan las medidas de justicia transicional que han tomado cinco países (Argentina, El Salvador, Irlanda del Norte, Perú y República Democrática del Congo) a nivel local. El análisis se hace teniendo como marco de referencia el tipo de conflicto que los mencionados países han padecido y los modelos transicionales nacionales y su importancia para el caso colombiano. En la segunda se analizan tres experiencias lideradas por los alcaldes de la administración 2004- 2007 en los municipios de San Carlos, Marquetalia y Samaniego en Colombia. Al abordar en forma detallada el contexto histórico de la violencia en cada país y las dinámicas del conflicto, este texto permite entender mejor el tipo de modelo y medidas transicionales que se adoptaron a nivel nacional, así como su influencia y relevancia en los programas emprendidos a nivel local.
Resumo:
Continua la publicación con el título : Revista de información de la Comisión Nacional Española de Cooperación con la UNESCO
Resumo:
O conjunto de tecnologias aplicadas ao sistema de produção agrícola tem como características principais a verticalização da produtividade, diminuição de custos, melhoria nas características físicas, químicas e biológicas do solo para proporcionarem o crescimento sustentável do meio de produção. Desta forma, o trabalho teve como objetivo determinar a variabilidade e as correlações lineares e especiais entre os atributos da planta e do solo, visando selecionar um indicador da qualidade física do solo de boa representatividade para produção de forragem. No ano agrícola de 2006, na Fazenda Bonança, município de Pereira Barreto (SP), foram analisados a produtividade de forragem do milho outonal (FDM) em sistema plantio direto irrigado e os atributos físicos do solo, num Latossolo Vermelho distrófico. O objetivo foi estudar a variabilidade e as correlações lineares e espaciais entre os atributos da planta e os do solo, visando selecionar um indicador da qualidade física do solo de boa representatividade para a produtividade da forragem. Foi instalada a malha geoestatística, para coleta de dados do solo e planta, contendo 125 pontos amostrais, numa área de 2.500 m². Os atributos estudados, além de não terem variado aleatoriamente, apresentaram variabilidade dos dados entre baixa e muito alta e seguiram padrões espaciais bem definidos, com alcances entre 7,8 e 38,0 m. Por outro lado, a correlação linear entre os atributos da planta com o do solo foi baixa e extremamente significativa. Os pares Massa Seca de forragem versus Microporosidade e Diâmetro do colmo versus Densidade do Solo foram melhor correlacionados na camada de 0-0.10m, enquanto os outros pares - Massa Seca de Forragem versus Macroporosidade - e Porosidade Total - apresentaram correlação inversa para a mesma camada. Entretanto, do ponto de vista espacial, houve uma alta correlação inversa entre Massa Seca de Forragem com Microporosidade, de modo que a microporosidade na camada de 0-0.10m pode ser considerada um bom indicador de qualidade física do solo, tendo em vista a produção de forragem de milho.