A study of drivers in major accidents, September, 1935-April, 1936, by Harold L. Gaunt [and] Laurence W. Murray, 1936

This preliminary study of the drivers involved in major accidents in Iowa and their subsequent examination was undertaken by the State Planning Board. All personal injury and fatal accidents, and those property damage accidents of such serious nature as to indicate the suspension or revocation of the drivers license, occurring in the state from 1935 to April 1036 are included.

Development of advanced tools and methods for the assessment and management of risk due to atypical major accident scenarios

Proper hazard identification has become progressively more difficult to achieve, as witnessed by several major accidents that took place in Europe, such as the Ammonium Nitrate explosion at Toulouse (2001) and the vapour cloud explosion at Buncefield (2005), whose accident scenarios were not considered by their site safety case. Furthermore, the rapid renewal in the industrial technology has brought about the need to upgrade hazard identification methodologies. Accident scenarios of emerging technologies, which are not still properly identified, may remain unidentified until they take place for the first time. The consideration of atypical scenarios deviating from normal expectations of unwanted events or worst case reference scenarios is thus extremely challenging. A specific method named Dynamic Procedure for Atypical Scenarios Identification (DyPASI) was developed as a complementary tool to bow-tie identification techniques. The main aim of the methodology is to provide an easier but comprehensive hazard identification of the industrial process analysed, by systematizing information from early signals of risk related to past events, near misses and inherent studies. DyPASI was validated on the two examples of new and emerging technologies: Liquefied Natural Gas regasification and Carbon Capture and Storage. The study broadened the knowledge on the related emerging risks and, at the same time, demonstrated that DyPASI is a valuable tool to obtain a complete and updated overview of potential hazards. Moreover, in order to tackle underlying accident causes of atypical events, three methods for the development of early warning indicators were assessed: the Resilience-based Early Warning Indicator (REWI) method, the Dual Assurance method and the Emerging Risk Key Performance Indicator method. REWI was found to be the most complementary and effective of the three, demonstrating that its synergy with DyPASI would be an adequate strategy to improve hazard identification methodologies towards the capture of atypical accident scenarios.

Cascading events triggering industrial accidents: quantitative assessment of NaTech and domino scenarios

The so called cascading events, which lead to high-impact low-frequency scenarios are rising concern worldwide. A chain of events result in a major industrial accident with dreadful (and often unpredicted) consequences. Cascading events can be the result of the realization of an external threat, like a terrorist attack a natural disaster or of “domino effect”. During domino events the escalation of a primary accident is driven by the propagation of the primary event to nearby units, causing an overall increment of the accident severity and an increment of the risk associated to an industrial installation. Also natural disasters, like intense flooding, hurricanes, earthquake and lightning are found capable to enhance the risk of an industrial area, triggering loss of containment of hazardous materials and in major accidents. The scientific community usually refers to those accidents as “NaTechs”: natural events triggering industrial accidents. In this document, a state of the art of available approaches to the modelling, assessment, prevention and management of domino and NaTech events is described. On the other hand, the relevant work carried out during past studies still needs to be consolidated and completed, in order to be applicable in a real industrial framework. New methodologies, developed during my research activity, aimed at the quantitative assessment of domino and NaTech accidents are presented. The tools and methods provided within this very study had the aim to assist the progress toward a consolidated and universal methodology for the assessment and prevention of cascading events, contributing to enhance safety and sustainability of the chemical and process industry.

Análisis de accidente grave de un establecimiento afectado por la directiva 2012/18/UE.

[Es]Los establecimientos industriales a los que la directiva 2012/18/UE es de aplicación deben establecer las acciones necesarias para controlar y planificar los riesgos inherentes a los accidentes graves que pueden ser causados por sustancias peligrosas. Esta directiva obliga a los establecimientos afectados clasificados como nivel superior a elaborar un informe de seguridad en el que se realicen análisis de riesgos de los posibles accidentes graves con el fin de calcular los posibles daños que pudieran producirse. Para ello se siguen una serie de metodologías que incluyen desde el análisis de las posibles hipótesis de accidente grave hasta el cálculo de sus consecuencias para personas, bienes materiales y medio ambiente. El informe técnico trata de analizar las consecuencias de un accidente real provocado por una nube tóxica de dióxido de nitrógeno (NO2) y se comparan sus resultados con los datos reales del accidente. Asimismo se utilizan una serie de supuestos para analizar las consecuencias de un escenario de riesgo en la misma instalación que debiera estar incluido en el informe de seguridad.

Nuclear disasters and health: lessons learned, challenges, and proposals

Past nuclear disasters, such as the atomic bombings in 1945 and major accidents at nuclear power plants, have highlighted similarities in potential public health effects of radiation in both circumstances, including health issues unrelated to radiation exposure. Although the rarity of nuclear disasters limits opportunities to undertake rigorous research of evidence-based interventions and strategies, identification of lessons learned and development of an effective plan to protect the public, minimise negative effects, and protect emergency workers from exposure to high-dose radiation is important. Additionally, research is needed to help decision makers to avoid premature deaths among patients already in hospitals and other vulnerable groups during evacuation. Since nuclear disasters can affect hundreds of thousands of people, a substantial number of people are at risk of physical and mental harm in each disaster. During the recovery period after a nuclear disaster, physicians might need to screen for psychological burdens and provide general physical and mental health care for many affected residents who might experience long-term displacement. Reliable communication of personalised risks has emerged as a challenge for health-care professionals beyond the need to explain radiation protection. To overcome difficulties of risk communication and provide decision aids to protect workers, vulnerable people, and residents after a nuclear disaster, physicians should receive training in nuclear disaster response. This training should include evidence-based interventions, support decisions to balance potential harms and benefits, and take account of scientific uncertainty in provision of community health care. An open and joint learning process is essential to prepare for, and minimise the effects of, future nuclear disasters.

Operational safety: Development of electronic system for dynamic balance evaluation of farm tractors

The present study aimed at the development and evaluation of a low cost electronic device in order to provide safety for farm tractor users. The major accident occurrence in agricultural surroundings is from farm tractor side bending. Therefore, this sensor was designed to detect and alert about it. The results were satisfying. © 2013 Taylor & Francis Group.

Global modeling of pollutant transport and deposition from anthropogenic emission hot spots on global scale

Urban centers significantly contribute to anthropogenic air pollution, although they cover only a minor fraction of the Earth's land surface. Since the worldwide degree of urbanization is steadily increasing, the anthropogenic contribution to air pollution from urban centers is expected to become more substantial in future air quality assessments. The main objective of this thesis was to obtain a more profound insight in the dispersion and the deposition of aerosol particles from 46 individual major population centers (MPCs) as well as the regional and global influence on the atmospheric distribution of several aerosol types. For the first time, this was assessed in one model framework, for which the global model EMAC was applied with different representations of aerosol particles. First, in an approach with passive tracers and a setup in which the results depend only on the source location and the size and the solubility of the tracers, several metrics and a regional climate classification were used to quantify the major outflow pathways, both vertically and horizontally, and to compare the balance between pollution export away from and pollution build-up around the source points. Then in a more comprehensive approach, the anthropogenic emissions of key trace species were changed at the MPC locations to determine the cumulative impact of the MPC emissions on the atmospheric aerosol burdens of black carbon, particulate organic matter, sulfate, and nitrate. Ten different mono-modal passive aerosol tracers were continuously released at the same constant rate at each emission point. The results clearly showed that on average about five times more mass is advected quasi-horizontally at low levels than exported into the upper troposphere. The strength of the low-level export is mainly determined by the location of the source, while the vertical transport is mainly governed by the lifting potential and the solubility of the tracers. Similar to insoluble gas phase tracers, the low-level export of aerosol tracers is strongest at middle and high latitudes, while the regions of strongest vertical export differ between aerosol (temperate winter dry) and gas phase (tropics) tracers. The emitted mass fraction that is kept around MPCs is largest in regions where aerosol tracers have short lifetimes; this mass is also critical for assessing the impact on humans. However, the number of people who live in a strongly polluted region around urban centers depends more on the population density than on the size of the area which is affected by strong air pollution. Another major result was that fine aerosol particles (diameters smaller than 2.5 micrometer) from MPCs undergo substantial long-range transport, with about half of the emitted mass being deposited beyond 1000 km away from the source. In contrast to this diluted remote deposition, there are areas around the MPCs which experience high deposition rates, especially in regions which are frequently affected by heavy precipitation or are situated in poorly ventilated locations. Moreover, most MPC aerosol emissions are removed over land surfaces. In particular, forests experience more deposition from MPC pollutants than other land ecosystems. In addition, it was found that the generic treatment of aerosols has no substantial influence on the major conclusions drawn in this thesis. Moreover, in the more comprehensive approach, it was found that emissions of black carbon, particulate organic matter, sulfur dioxide, and nitrogen oxides from MPCs influence the atmospheric burden of various aerosol types very differently, with impacts generally being larger for secondary species, sulfate and nitrate, than for primary species, black carbon and particulate organic matter. While the changes in the burdens of sulfate, black carbon, and particulate organic matter show an almost linear response for changes in the emission strength, the formation of nitrate was found to be contingent upon many more factors, e.g., the abundance of sulfuric acid, than only upon the strength of the nitrogen oxide emissions. The generic tracer experiments were further extended to conduct the first risk assessment to obtain the cumulative risk of contamination from multiple nuclear reactor accidents on the global scale. For this, many factors had to be taken into account: the probability of major accidents, the cumulative deposition field of the radionuclide cesium-137, and a threshold value that defines contamination. By collecting the necessary data and after accounting for uncertainties, it was found that the risk is highest in western Europe, the eastern US, and in Japan, where on average contamination by major accidents is expected about every 50 years.

Magnitude da morbidade relacionada ao trabalho no Rio Grande do Norte

Diseases and disorders related to work sets up an important public health problem in Brazil and worldwide. However, the reality of these diseases still constitutes a gap with regard to its characterization and epidemiological situation, especially in Brazil. In this context, this study aims to analyze the magnitude of morbidity related to work from the injuries and illnesses reported by Health the Diseases Notifiable of Health of the State Public River Health Department worker Reference Center Information System services Grande do Norte from 2007 to 2014. It is ecological study, quantitative cross-sectional study in which the analysis unit of the municipalities of Rio Grande do Norte. Data were collected from the state base of Diseases Notifiable Information System Centre of the Secretariat of State Workers' Health Reference Public Health of Rio Grande do Norte, between March and June 2015, after the approval of the Committee of Ethics in Research of the Federal University of Rio Grande do Norte, Opinion 014/2014. The population was represented by the universe of cases of diseases and disorders related to work that were reported and shut down the system from 2007 to 2014. Data were analyzed using descriptive and inferential statistics, presented in tables, graphs, charts and figures. For this, we used the Microsoft Excel 2007 and SPSS version 20.0. To check the significance level we opted for the application of the chi-square or Fisher tests. We adopted the significance level of p <0.05. Of the 10,161 cases of diseases related to the reported work, the biological work accidents had the highest percentage (52.84%) followed by serious occupational accidents (37.49%). For diseases, the highlights were musculoskeletal (4.82%), mental disorders (2.19%) and exogenous intoxication (1.97%). Among men, there was a predominance of major accidents (91.80%), mental disorders (70.00%) and exogenous poisoning (52.84%). Women were most affected by biological accidents (77.50%) and musculoskeletal diseases (64.10%). Among workers who have suffered injuries predominated mulatto (%), mean age of 35.86 years, low education (%) and workers in the formal sector (%). Among the accidents, biological (n = 5,369) accounted for 52.84% of cases occurred predominantly among nursing professionals (48.31%). The percutaneous exposure was the most frequent (73.05%) and the occurrence of circumstances was improper disposal of sharps (45.28%), the needle the most common agent (66.62%) and the organic material was blood (72.99%). Most injured workers were vaccinated against hepatitis B (68.13%), but no information as to the assessment of the vaccine response. In the course of the disease predominated ignored the situation with loss of monitoring of clinical follow-up (55.62%). There was also an increase in the notification of serious industrial accidents predominantly male (91.80%) workers aged 25-44 years (54.3%) and typical accidents (76.3%). The temporary disability was the most common outcome (55.53%) and hand the most affected part (33.00%); the mining and construction industry had the highest number of cases (25.1%) in registered employee (34.2%). The findings of this study show a positive result in relation to increased mandatory reporting of injuries and illnesses related to work together to health services that meet victimized workers, towards the occurrence of knowledge of these accidents for decision making in public plans and policies of health. However, the information system still needs improvement in both the coverage and the quality of the data to demonstrate with greater reliability the magnitude of events to support the planning of workers' health into shares in the state.

Inconsistency of surrogate measures of alcohol-related accidents in South Australia

Three major changes in drink driving enforcement have occurred in South Australia since 1981. The effect of these changes on a number of surrogate measures of alcohol involvement in accidents were investigated. The surrogates included alcohol involvement of driver fatalities, and combinations of casualty, serious casualty, single vehicle and nighttime accidents. Data from previous studies were also cited. It was found that relationships between surrogate measures were inconsistent, and incompatible with assumptions about drink driving levels and related accidents. It was concluded that until these effects are understood the use of surrogate measures should be treated with caution.

Industrial accidents involving release of chemicals into the environment:Ecotoxicology

Major industrial accidents pose a serious threat to surrounding habitats. Each accident is unique in terms of pollutants released, pollutant concentrations and pollutant dispersal. The habitats receiving the pollutant(s) are also unique. These factors mean that assessing the environmental and ecological impact of any given pollution event will be complex. Case histories of the biological impact of chemicals released from industrial accidents are reviewed to determine how to assess ecotoxicity of pollutants involved.

Diagnostic de securite d'une entreprise bresilienne a partir de l'analyse des accidents du travail par la methode de l'arbre des causes

We present here the results of a study of 21 work-related accidents that occurred in a Brazilian manufacturing company. The aim was to assess the safety level of the company to improve its work accident prevention policy. In the last 6 months of 1992 and 1993, all accidents resulting in 15 days' absence from work, reported for social security purposes, were analyzed using the INRS causal tree method (ADC) and a questionnaire completed on site. Potential risk factors for accidents were identified based on the specific factors highlighted by the ADC. More universal trees were also compiled for the safety assessment. Three hundred and thirty specific accident factors were recorded (man of 15.71 per accident). This is consistent with there being multiple causes of accidents rather than the assertion of Brazilian business safety departments that accidents are due to 'dangerous' or 'unsafe' behavior. Introducing the idea of culpability into accidents prevents the implementation of an appropriate information feedback process, essential for effective prevention. However, the large number of accidents related to 'material' (78%) and 'environment' (70%) indicates that working conditions are poor. This shows that the technical risks, mostly due to unsafe machinery and equipment are not being dealt with. Seventy-five potential accident factors were identified. Of these, 35% were 'organizational', a high proportion for the company studied. Improvisation occurs at all levels, particularly at the organizational level. This is, thus a major determinant for entire series of, if not most, accident situations. The poor condition of equipment also plays a major role in accidents. The effects of poor equipment on safety exacerbate the organizational shortcomings. The company's safety intervention policy should improve the management of human resources (rules designating particular workers for particular workstations; instructions for the safe operation of machines and equipment; training of operators, etc.) and introduce programs to detect risks and to improve the safety of machines and equipment. We also recommend the establishment of a program to follow the results of any preventive measures adopted.

Diagnostic de sécurité d’une entreprise brésilienne à partir de l’analyse des accidents du travail par la méthode de l’arbre des causes

We present here the results of a study of 21 work-related accidents that occurred in a Brazilian manufacturing company. The aim was to assess the safety level of the company to improve its work accident prevention policy. In the last 6 months of 1992 and 1993, all accidents resulting in 15 days' absence from work, reported for social security purposes, were analyzed using the INRS causal tree method (ADC) and a questionnaire completed on site. Potential risk factors for accidents were identified based on the specific factors highlighted by the ADC. More universal trees were also compiled for the safety assessment. Three hundred and thirty specific accident factors were recorded (mean of 15.71 per accident). This is consistent with there being multiple causes of accidents rather than the assertion of Brazilian business safety departments that accidents are due to dangerous or unsafe behavior. Introducing the idea of culpability into accidents prevents the implementation of an appropriate information feedback process, essential for effective prevention. However, the large number of accidents related to material (78%) and environment (70%) indicates that working conditions are poor. This shows that the technical risks, mostly due to unsafe machinery and equipment are not being dealt with. Seventy-five potential accident factors were identified. Of these, 35% were organizational, a high proportion for the company studied. Improvisation occurs at all levels, particularly at the organizational level. This is thus a major determinant for entire series of, if not most, accident situations. The poor condition of equipment also plays a major role in accidents. The effects of poor equipment on safety exacerbate the organizational shortcomings. The company's safety intervention policy should improve the management of human resources (rules designating particular workers for particular workstations; instructions for the safe operation of machines and equipment; training of operators, etc.) and introduce programs to detect risks and to improve the safety of machines and equipment. We also recommend the establishment of a program to follow the results of any preventive measures adopted.

Stressful life events and occupational accidents

Objective: The purpose of this study was to examine the association between stressful life events and occupational accidents. Methods: This was a population-based case-control study, carried out in the city of Botucatu, in southeast Brazil. The cases consisted of 108 workers who had recently experienced occupational accidents. Each case was matched with three controls. The cases and controls answered a questionnaire about recent exposure to stressful life events. Results: Reporting of environmental problems, being a victim of assault, not having enough food at home and nonoccupational fatigue were found to be risk factors for work-related accidents with estimated incidence rate ratios of 1.4 [95% confidence interval (95% CI) 1.1-1.7], 1.3 (95% CI 1.1 1-1.7), 1.3 (95% CI 1.1-1.6), and 1.4 (95% CI 1.2-1.7) respectively. Conclusions: The findings of the study suggested that nonwork variables contribute to occupational accidents, thus broadening the understanding of these phenomena, which can support new approaches to the prevention of occupational accidents.

Industrial accidents triggered by lightning: causes and consequences

Natural hazards affecting industrial installations could directly or indirectly cause an accident or series of accidents with serious consequences for the environment and for human health. Accidents initiated by a natural hazard or disaster which result in the release of hazardous materials are commonly referred to as Natech (Natural Hazard Triggering a Technological Disaster) accidents. The conditions brought about by these kinds of events are particularly problematic, the presence of the natural event increases the probability of exposition and causes consequences more serious than standard technological accidents. Despite a growing body of research and more stringent regulations for the design and operation of industrial activities, Natech accidents remain a threat. This is partly due to the absence of data and dedicated risk-assessment methodologies and tools. Even the Seveso Directives for the control of risks due to major accident hazards do not include any specific impositions regarding the management of Natech risks in the process industries. Among the few available tools there is the European Standard EN 62305, which addresses generic industrial sites, requiring to take into account the possibility of lightning and to select the appropriate protection measures. Since it is intended for generic industrial installations, this tool set the requirements for the design, the construction and the modification of structures, and is thus mainly oriented towards conventional civil building. A first purpose of this project is to study the effects and the consequences on industrial sites of lightning, which is the most common adverse natural phenomenon in Europe. Lightning is the cause of several industrial accidents initiated by natural causes. The industrial sectors most susceptible to accidents triggered by lightning is the petrochemical one, due to the presence of atmospheric tanks (especially floating roof tanks) containing flammable vapors which could be easily ignited by a lightning strike or by lightning secondary effects (as electrostatic and electromagnetic pulses or ground currents). A second purpose of this work is to implement the procedure proposed by the European Standard on a specific kind of industrial plant, i.e. on a chemical factory, in order to highlight the critical aspects of this implementation. A case-study plant handling flammable liquids was selected. The application of the European Standard allowed to estimate the incidence of lightning activity on the total value of the default release frequency suggested by guidelines for atmospheric storage tanks. Though it has become evident that the European Standard does not introduce any parameters explicitly pointing out the amount of dangerous substances which could be ignited or released. Furthermore the parameters that are proposed to describe the characteristics of the structures potentially subjected to lightning strikes are insufficient to take into account the specific features of different chemical equipment commonly present in chemical plants.