Mercaptans extraction from jet-fuel streams using ionic liquids

Desulfurization is one of the most important processes in the refining industry. Due to a growing concern about the risks to human health and environment, associated with the emissions of sulfur compounds, legislation has become more stringent, requiring a drastic reduction in the sulfur content of fuel to levels close to zero (< 10 ppm S). However, conventional desulfurization processes are inefficient and have high operating costs. This scenario stimulates the improvement of existing processes and the development of new and more efficient technologies. Aiming at overcoming these shortcomings, this work investigates an alternative desulfurization process using ionic liquids for the removal of mercaptans from "jet fuel" streams. The screening and selection of the most suitable ionic liquid were performed based on experimental and COSMO-RS predicted liquid-liquid equilibrium data. A model feed of 1-hexanethiol and n-dodecane was selected to represent a jet-fuel stream. High selectivities were determined, as a result of the low mutual solubility between the ionic liquid and the hydrocarbon matrix, proving the potential use of the ionic liquid, which prevents the loss of fuel for the solvent. The distribution ratios of mercaptans towards the ionic liquids were not as favorable, making the traditional liquid-liquid extraction processes not suitable for the removal of aliphatic S-compounds due to the high volume of extractant required. This work explores alternative methods and proposes the use of ionic liquids in a separation process assisted by membranes. In the process proposed the ionic liquid is used as extracting solvent of the sulfur species, in a hollow fiber membrane contactor, without co-extracting the other jet-fuel compound. In a second contactor, the ionic liquid is regenerated applying a sweep gas stripping, which allows for its reuse in a closed loop between the two membrane contactors. This integrated extraction/regeneration process of desulfurization produced a jet-fuel model with sulfur content lower than 2 ppm of S, as envisaged by legislation for the use of ultra-low sulfur jet-fuel. This result confirms the high potential for development of ultra-deep desulfurization application.

Revisión bibliográfica del tratamiento de biogás por biofiltración.

[ES]En el siguiente trabajo se ha realizado una revisión bibliográfica en la que se muestran los resultados obtenidos al llevar a cabo la purificación del biogás y/o la eliminación del metano, en los casos en los que su valorización no sea posible, mediante métodos biológicos (biofiltración). Se recogen asimismo las diversas fuentes desde las que se genera el biogás (generación incontrolada o producción controlada) junto con las concentraciones típicas de todos los compuestos que pueden formar su composición. En la purificación del biogás se ha estudiado la eliminación de compuestos perjudiciales para el aprovechamiento energético del biogás, como son el sulfuro de hidrógeno (H2S), los mercaptanos y los siloxanos. Para el estudio de los compuestos a eliminar se ha diferenciado entre distintas configuraciones de biorreactores (biofiltros, biofiltros percoladores y biolavadores) y para cada una de ellas se han recogido datos representativos como la temperatura óptima de operación, las diferencias entre operar a pH ácido o básico (teniendo en cuenta que el pH natural de operación es ácido pero que en estas condiciones la solubilidad del H2S es menor y el relleno se deteriora con mayor rapidez). También se ha analizado la influencia de la cantidad de oxígeno necesario para garantizar la degradación total de los contaminantes y evitar la acumulación de depósitos de azufre, llegando incluso a necesitarse proporciones de O2/H2S de 49.2 para la oxidación completa del H2S. Se ha estudiado también la cantidad necesaria de nitrógeno (nutriente) en los procesos llevados a cabo en condiciones anaerobias (cercana a 200 mgN-NO3 -/L), así como el efecto que tienen los compuestos producidos en la oxidación parcial (azufre elemental (S0), metanol, formaldehido, etc.) en el funcionamiento del sistema.

Compostos de enxofre em misturas de diesel e biodiesel

É difundido na literatura especializada que o uso de misturas de biodiesel e diesel de petróleo reduz as emissões dos compostos de enxofre. Esses compostos são responsáveis por inúmeras enfermidades respiratórias, além de provocar danos ao catalisador automotivo, contribuindo desta forma para a emissão de outros poluentes. Neste trabalho fez-se uma identificação dos compostos de enxofre, antes da queima no motor, presentes no diesel e em misturas de biodiesel/diesel de diferentes fontes. A metodologia empregada foi a cromatografia de fase gasosa e inicialmente empregou-se um detector de ionização por chama de hidrogênio para ajuste das condições operacionais, por ser um detector considerado universal e capaz de identificar tanto os majoritários hidrocarbonetos como os compostos de enxofre. Em seguida aplicou-se os parâmetros operacionais obtidos a um cromatógrafo à gás acoplado a um detector seletivo para enxofre, o SCD (sulphur chemiluminescence detector) para a identificação apenas dos compostos de enxofre. Após a obtenção dos dados teóricos em laboratório, foi realizada a análise de compostos mercaptídicos produzidas pelas emissões de um ônibus do Rio de Janeiro abastecido com diesel puro e misturas diesel/biodiesel nas proporções (v/v) 2% (B2), 5% (B5), 10% (B10), and 20% (B20). Os resultados indicaram uma redução dos compostos de enxofre proporcional à adição do biodiesel tanto na teoria quanto na prática

Thia-michael addition reactions in water using 3-[Bis(alkylthio) methylene]pentane-2,4-diones as odorless and efficient thiol equivalents

3-[Bis(ethylthio)methylene]pentane-2,4-dione (1a) and 3-[bis(benzylthio)methylene]pentane-2,4-dione (1b) have been investigated as non-thiolic and odorless thiol equivalents in thia-Michael addition reactions. In the presence of aqueous p-dodecyl benzenesulfonic acid (DBSA), compound (1) was cleaved and the generated thiols underwent facile conjugate addition to alpha,beta-unsaturated ketones 2 in-situ, affording the corresponding beta-keto sulfides (3) in good yields.

Avaliação da dolomita funcionalizada para remoção de H2S em gás natural

The natural gas is an alternative source of energy which is found underground in porous and permeable rocks and being associated or not to the oil. Its basic composition includes methane, other hydrocarbon and compounds such as carbon dioxide, nitrogen, sulphidric gas, mercaptans, water and solid particles. In this work, the dolomite mineral, a double carbonate of calcium and magnesium whose the chemical formula is CaMg(CO3)2, was evaluated as adsorbent material. The material was characterized by granulometric analysis, X-ray fluorescence, X-ray diffraction, thermogravimetric analysis, differential thermal analysis, specific surface area, porosity, scanning electronic microscopy and infrared spectroscopy. Then the material was functionalized with diethanolamine (dolomite+diethanolamine) and diisopropylamine (dolomite+diisopropylamine). The results indicated that the adsorbents presented appropriate physiochemical characteristics for H2S adsorption. The adsorption tests were accomplished in a system coupled to a gas chromatograph and the H2S monitoring in the output of the system was accomplished by a pulsed flame photometric detector (PFPD). The adsorbents presented a significant adsorption capacity. Among the analyzed adsorbents, the dolomite+diethanolamine presented the best capacity of adsorption. The breakthrough curves obtained proved the efficiency of this process

Preparação e caracterização estrutural de complexos quirais de nióbio, utilizando álcoois terpênicos quirais como ligantes

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Use of Hg-Electroplated-Pt Ultramicroelectrode for Determining Elemental Sulphur in Naphtha Samples

This paper describes the applicability of a Hg-electroplated-Pt ultramicroelectrode in the quantification of elemental sulphur in naphtha samples by square-wave voltammetry. A reproducible deposition methodology was studied and is reported in this paper. This methodology is innovative and relies on the quality of the mercury stock solution to obtain reproducible surfaces required for the analytical methodology. All analyses were performed using a Hg-electroplated-Pt ultramicroelectrode (Hg-Pt UME) due to the low sensibility of such devices to ohmic drops in resistive solutions. The responses of the peak areas in voltammetric experiments were linear in all of the range studied. The method developed here is accurate and reproducible, with a detection limit of 0.010 mg L-1 and a good recovery range for both standard solutions of elemental sulphur (85 to 99%) and real naphtha sample (79%). These results attest to the potential for the application of this electroanalytical methodology in determining elemental sulphur in naphtha samples containing mercaptans and disulphides.

Potency of Michael reaction acceptors as inducers of enzymes that protect against carcinogenesis depends on their reactivity with sulfhydryl groups

Induction of phase 2 enzymes and elevations of glutathione are major and sufficient strategies for protecting mammals and their cells against the toxic and carcinogenic effects of electrophiles and reactive forms of oxygen. Inducers belong to nine chemical classes and have few common properties except for their ability to modify sulfhydryl groups by oxidation, reduction, or alkylation. Much evidence suggests that the cellular “sensor” molecule that recognizes the inducers and signals the enhanced transcription of phase 2 genes does so by virtue of unique and highly reactive sulfhydryl functions that recognize and covalently react with the inducers. Benzylidene-alkanones and -cycloalkanones are Michael reaction acceptors whose inducer potency is profoundly increased by the presence of ortho- (but not other) hydroxyl substituent(s) on the aromatic ring(s). This enhancement correlates with more rapid reactivity of the ortho-hydroxylated derivatives with model sulfhydryl compounds. Proton NMR spectroscopy provides no evidence for increased electrophilicity of the β-vinyl carbons (the presumed site of nucleophilic attack) on the hydroxylated inducers. Surprisingly, these ortho-hydroxyl groups display a propensity for extensive intermolecular hydrogen bond formation, which may raise the reactivity and facilitate addition of mercaptans, thereby raising inducer potencies.

Avaliação da dolomita funcionalizada para remoção de H2S em gás natural

The natural gas is an alternative source of energy which is found underground in porous and permeable rocks and being associated or not to the oil. Its basic composition includes methane, other hydrocarbon and compounds such as carbon dioxide, nitrogen, sulphidric gas, mercaptans, water and solid particles. In this work, the dolomite mineral, a double carbonate of calcium and magnesium whose the chemical formula is CaMg(CO3)2, was evaluated as adsorbent material. The material was characterized by granulometric analysis, X-ray fluorescence, X-ray diffraction, thermogravimetric analysis, differential thermal analysis, specific surface area, porosity, scanning electronic microscopy and infrared spectroscopy. Then the material was functionalized with diethanolamine (dolomite+diethanolamine) and diisopropylamine (dolomite+diisopropylamine). The results indicated that the adsorbents presented appropriate physiochemical characteristics for H2S adsorption. The adsorption tests were accomplished in a system coupled to a gas chromatograph and the H2S monitoring in the output of the system was accomplished by a pulsed flame photometric detector (PFPD). The adsorbents presented a significant adsorption capacity. Among the analyzed adsorbents, the dolomite+diethanolamine presented the best capacity of adsorption. The breakthrough curves obtained proved the efficiency of this process