Lead based paint poisoning amendments of 1972. Hearings, Ninety-second Congress, second session, on S. 3080 ...

Includes bibliographies

Information statement on the removal of lead-based paint from exterior surfaces.

"October 1, 1995."

Reliability analysis of encapsulation methods for lead -based paint through an accelerated life testing

The adverse health effects of long-term exposure to lead are well established, with major uptake into the human body occurring mainly through oral ingestion by young children. Lead-based paint was frequently used in homes built before 1978, particularly in inner-city areas. Minority populations experience the effects of lead poisoning disproportionately. ^ Lead-based paint abatement is costly. In the United States, residents of about 400,000 homes, occupied by 900,000 young children, lack the means to correct lead-based paint hazards. The magnitude of this problem demands research on affordable methods of hazard control. One method is encapsulation, defined as any covering or coating that acts as a permanent barrier between the lead-based paint surface and the environment. ^ Two encapsulants were tested for reliability and effective life span through an accelerated lifetime experiment that applied stresses exceeding those encountered under normal use conditions. The resulting time-to-failure data were used to extrapolate the failure time under conditions of normal use. Statistical analysis and models of the test data allow forecasting of long-term reliability relative to the 20-year encapsulation requirement. Typical housing material specimens simulating walls and doors coated with lead-based paint were overstressed before encapsulation. A second, un-aged set was also tested. Specimens were monitored after the stress test with a surface chemical testing pad to identify the presence of lead breaking through the encapsulant. ^ Graphical analysis proposed by Shapiro and Meeker and the general log-linear model developed by Cox were used to obtain results. Findings for the 80% reliability time to failure varied, with close to 21 years of life under normal use conditions for encapsulant A. The application of product A on the aged gypsum and aged wood substrates yielded slightly lower times. Encapsulant B had an 80% reliable life of 19.78 years. ^ This study reveals that encapsulation technologies can offer safe and effective control of lead-based paint hazards and may be less expensive than other options. The U.S. Department of Health and Human Services and the CDC are committed to eliminating childhood lead poisoning by 2010. This ambitious target is feasible, provided there is an efficient application of innovative technology, a goal to which this study aims to contribute. ^

Lead-containing paint removal, containment, and disposal /

"February 1995."

Lowering of relaxor transition temperature in Lead-based perovskites under pressure

The dielectric constants of lead iron niobate (PFN) and 40% lead zinc niobate (PZN) added to lead iron niobate (PFN0.6-PZN(0.4)) have been measured as a function of pressure up to 6 GPa under isothermal conditions between room temperature and 348 K. The relaxer transition temperature measured at 1 kHz excitation frequency varies at a rate -24.5 K/GPa for PFN and at a rate of - 28.8 K/GPa for the PFN0.6-PZN(0.4) composition.

High energy oxygen ion induced modifications in lead based perovskite thin films

The lead based ferroelectric PbZr0.53Ti0.47O3 (PZT), (Pb0.90La0.10)TiO3 (PLT10) and (Pb0.80La0.20)TiO3 (PLT20) thin films, prepared by pulsed laser ablation technique, were studied for their response to the 70 MeV oxygen ion irradiation. The dielectric analysis, capacitance-voltage (C- V) and DC leakage current measurements were performed before and after the irradiation to high-energy oxygen ions. The irradiation produced considerable changes in the dielectric, C-V, leakage characteristics and induced some amount of amorphization. The PZT films showed partial recrystallization after a thermal annealing at 400 degrees C for 10 min. The phase transition temperature [T-c] of PLT20 increased from 115 degrees C to 120 degrees C. The DC conductivity measurements showed a shift in the onset of non-linear conduction region. The current density decreased by two orders of magnitude after irradiation. After annealing the irradiated films at a temperature of 400 degrees C for 10 min, the films partially regained the dielectric and electrical properties. The results are discussed in terms of the irradiation-induced amorphization, the pinning of the ferroelectric domains by trapped charges and the thermal annealing of the defects generated during the irradiation. (C) 2007 Elsevier B.V. All rights reserved.

Thixotropic studies of lead-based solder, lead-free solder and conductive adhesive pastes

The stencil printing process is an important process in the assembly of Surface Mount Technology (SMT)devices. There is a wide agreement in the industry that the paste printing process accounts for the majority of assembly defects. Experience with this process has shown that typically over 60% of all soldering defects are due to problems associated with the flow properties of solder pastes. Therefore, the rheological measurements can be used as a tool to study the deformation or flow experienced by the pastes during the stencil printing process. This paper presents results on the thixotropic behaviour of three pastes; lead-based solder paste, lead-free solder paste and isotropic conductive adhesive (ICA). These materials are widely used as interconnect medium in the electronics industry. Solder paste are metal alloys suspended in a flux medium while the ICAs consist of silver flakes dispersed in an epoxy resin. The thixotropy behaviour was investigated through two rheological test; (i) hysteresis loop test and (ii) steady shear rate test. In the hysteresis loop test, the shear rate were increased from 0.001 to 100s-1 and then decreased from 100 to 0.001s-1. Meanwhile, in the steady shear rate test, the materials were subjected to a constant shear rate of 0.100, 100 and 0.001s-1 for a period of 240 seconds. All the pastes showed a high degree of shear thinning behaviour with time. This might be due to the agglomeration of particles in the flux or epoxy resin that prohibits pastes flow under low shear rate. The action of high shear rate would break the agglomerates into smaller pieces which facilitates the flow of pastes, thus viscosity is reduced at high shear rate. The solder pastes exhibited a higher degree of structural breakdown compared to the ICAs. The area between the up curve and down curve in the hysteresis curve is an indication of the thixotropic behavior of the pastes. Among the three pastes, lead-free solder paste showed the largest area between the down curve and up curve, which indicating a larger structural breakdown in the pastes, followed by lead-based solder paste and ICA. In a steady shear rate test, viscosity of ICA showed the best recovery with the steeper curve to its original viscosity after the removal of shear, which indicating that the dispersion quality in ICA is good because the high shear has little effect on the microstructure of ICA. In contrast, lead-based paste showed the poorest recovery which means this paste undergo larger structural breakdown and dispersion quality in this paste is poor because the microstructure of the paste is easily disrupted by high shear. The structural breakdown during the application of shear and the recovery after removal of shear is an important characteristic in the paste printing process. If the paste’s viscosity can drop low enough, it may contribute to the aperture filling and quick recovery may prevent slumping.

Microfiltration of water-based paint effluents

This paper deals with recovery of water from the effluent in a paint factory in Kuala Lumpur for reuse using microfiltration technique.

Protecting Children: The United States Did Not Get the Lead Out

The lack of education and awareness of the potential of lead based paint hazards in residents across the United States is still a problem today. Simple educational tools and regulation changes can protect children who are at risk from being harmed by this hazard. Currently, there is inadequate outreach to educate the general public about lead based paint. A questionnaire was provided to families that have children under the age of seven and that live in residences built prior to 1978. The research and questionnaires confirm that more education, as well as regulation changes, is needed to keep children safe from lead paint hazards.

Report of the New South Wales Board of Trade on white lead as used in the painting industry : its dangers and their prevention. With appendices, evidence, addresses, and exhibits.

At head of title: New South Wales.

Serious lead poisoning in childhood: Still a problem after a century

Objective: To describe a series of patients with clinically significant lead poisoning. Methodology: A case series of nine patients with lead poisoning who required inpatient management, identified through a Clinical Toxicology Service. Results: Nine children presented with clinically significant lead poisoning. The median serum lead was 2.5 mumol/L (range 1.38-4.83). Eight of the children were exposed to lead-based paint, with seven due to dust from sanded lead paint during house renovations. Serial blood determinations suggested re-exposure in four of the patients, and in one of these patients the re-exposure was from a different source of lead. Eight of the patients required chelation therapy. Conclusions: Serious lead poisoning continues to occur and there appears to be complacency regarding the hazard posed by lead paint in old houses.

Darkening on Lead based pigments: microbiological contribution

The biodeterioration/biodegradation process is an important issue for the conservation of cultural heritage that needs urgent answers to their rehabilitation. In this way, the role of microorganisms in surfaces alteration was exploited. This work revealed a strong relationship between the microbiological proliferation and the damaged areas, evidencing the important role of the microorganisms in mural paintings alteration process. The oxidation of lead-based pigments noticeably contributes to the pigments alteration, and seems to be correlated with the presence of biodeteriorative microorganisms. The study of the mechanisms underlying the microbiological attack of mural paintings has been explored to understand as much as possible the proliferative ability and biodeteriorative capacity of the microorganisms, related to darkening on lead-based pigments

Comparing the ethical predisposition of university students in five English-speaking countries : an examination of 14 questionable business practices

Recent years have seen intense scrutiny focused on the reported ethical breaches of enterprises across the globe. At the forefront of the accompanying criticism are the actions of giant American firms such as WorldCom, Arthur Anderson, and Enron. However, such deviations from acceptable standards of conduct have not been confined to the American market. Australia endured its era of “corporate excess” in the 1980s [Milton-Smith, 1997]. As a result, a spate of ethics-based research was undertaken in the early 1990s. More recently, China has been identified as a major venue for behavior deemed to be unacceptable, even unsafe. Issues such as counterfeit fashion items, software, and automobile parts have been a concern for several years [Gonzalez, 2007]. Perhaps more disconcerting are the recent recalls of children’s products, many of which were produced for leading toy companies such as Mattel and Fisher-Price, because of the use of dangerous lead-based paint. As one might anticipate, news reports and consumer protection agencies have been quick to condemn any action that falls within the “controversial” category. Indeed, many segments of society characterize such actions as unethical behavior. One result of this increased level of concern is the higher level of attention given to ethics in higher education programs. Even accreditation bodies such as AACSB have virtually mandated the integration of ethics into the curriculum. As a consequence, academicians have ramped up their ethics-based research agendas.

Terahertz analysis of stratified wall plaster at buildings of cultural importance across Europe

Terahertz (THz) radiation is being developed as a tool for the analysis of cultural heritage, and due to recent advances in technology is now available commercially in systems which can be deployed for field analysis. The radiation is capable of penetrating up to one centimetre of wall plaster and is delivered in ultrafast pulses which are reflected from layers within this region. The technique is non-contact, non-invasive and non-destructive. While sub-surface radar is able to penetrate over a metre of wall plaster, producing details of internal structures, infrared and ultraviolet techniques produce information about the surface layers of wall plaster. THz radiation is able to provide information about the interim region of up to approximately one centimetre into the wall surface. Data from Chartres Cathedral, France, Riga Dome Cathedral, Latvia, and Chartreuse du Val de Bénédiction, France is presented each with different research questions. The presence of sub-surface paint layers was expected from documentary evidence, dating to the 13th Century, at Chartres Cathedral. In contrast, at the Riga Dome Cathedral surface painting had been obscured as recently as 1941 during the Russian occupation of Latvia using white lead-based paint. In the 13th Century, wall paintings at the Chapel of the Frescos, Chartreuse du Val de Benediction in Villeneuve les Avignon were constructed using sinopia under-painting on plaster covering uneven stonework.. This paper compares and contrasts the ability of THz radiation to provide information about sub-surface features in churches and Cathedrals across Europe by analysing depth based profiles gained from the reflected signal. © (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE).