137 resultados para LEED


Relevância:

20.00% 20.00%

Publicador:

Resumo:

A implantação de práticas de gestão ambiental nos canteiros de obras se tornou de fundamental importância para o setor da construção civil. Nas obras de edificação que visam obter a certificação LEED, são implementadas práticas que buscam a minimização e o reaproveitamento dos resíduos de construção civil, representando uma possibilidade de redução dos impactos ambientais produzidos pelo setor. Este trabalho apresenta um estudo comparativo sobre a geração de resíduos de quatro obras de edificações no município do Rio de Janeiro, sendo que duas delas implantaram práticas para obtenção da certificação LEED. Complementarmente, foi realizada uma pesquisa através de questionário com profissionais da construção civil buscando identificar a sua percepção sobre construções sustentáveis e gerenciamento de resíduos sólidos. Desconsiderando o solo de escavação, o entulho foi o resíduo mais gerado em todas as quatro obras, seguido pela sucata metálica, resíduos não recicláveis e madeira. A obra com certificação LEED apresentou o menor índice total de resíduos, 119,23 kg/m2, sendo este valor próximo às médias de países desenvolvidos.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Surface reconstructions on Si(113) induced by dissociated hydrogen adsorption have been studied using low energy electron diffraction (LEED). It has been found that: (1) at 300 K and 80 K temperatures, with the increase of hydrogen coverage on the surface, the (3 x 1) phase transferred continuously into a hydrogen saturated (1 x 1)-2H phase; (2) flashing of the (1 x 1)-2H surface at about 1100 degrees C resulted in a complete new phase of(1 x 3) and further annealing of the sample at 1250 degrees C gave back the starting surface of (3 x 1); (3) saturated hydrogen adsorption at a sample temperature of 700 degrees C resulted in a stable new phase of(1 x 2)-H and further saturation doses of hydrogen at other temperatures below 700 degrees C did not change the (1 x 2) LEED pattern; (4) annealing of the (I x 2)-H surface in the same manner as (2) gave similar results.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A very fast method, cluster low-energy electron diffraction (LEED) is proposed for LEED I-V spectral analysis, in which three appproximations are introduced: the small-atom approximation, omission of the structure factors, and truncation of higher order ( > 2) scattering events. The method has been tested using a total of four sets of I-V spectra calculated by fully dynamic LEED for (i) the simple overlayer system, O on Ni{100}, and (ii) the reconstructed system, Cu on W{100}, and also one set of experimental data from W{100}-c(2 X 2)-Cu. In each case the correct structural parameters are recovered. It is suggested that for complex systems cluster LEED provides an efficient fast route to trial structures, which could be refined by automated tenser LEED.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

It is shown theoretically that LEED patterns from ordered overlayer systems bear a strong relationship to electron holograms, and that phase information is recorded in the diffraction intensities. It is, therefore, possible to obtain structural information by direct holographic inversion from conventional LEED I-V spectra.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

LOW-ENERGY electron diffraction (LEED) has become the most successful technique in surface crystallography1, but because of the complexity of the surface-electron scattering interactions, analyses of LEED data are still conducted on a trial-and-error basis: a direct-inversion method for treating LEED intensity data remains an attractive goal2. Building on recent theoretical and experimental developments in electron holography from surface structures3-16, we show here that three-dimensional images with atomic resolution can be obtained by a direct transform of conventional LEED intensity spectra.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Molecularly adsorbed CO on Pd{110} has been shown (R. Raval et al., Chem. Phys. Lett. 167 (1990) 391, ref. [1]) to induce a substantial reconstruction of the surface in the coverage range 0.3 <theta less-than-or-equal-to 0.75. Throughout this coverage range, the adsorbate-covered reconstructed surface exhibits a (4 x 2) LEED pattern. However, the exact nature of the reconstruction remains uncertain. We have conducted a LEED I(E) "fingerprinting" analysis of the CO/Pd{110}-(4 x 2) structure in order to establish the type of reconstruction induced in the metal surface. This study shows that the LEED I(E) profiles of the integral order and appropriate half-order beams of the CO/Pd{110}-(4 x 2) pattern closely resemble the I(E) profiles theoretically calculated for a Pd{110}-(1 x 2) missing-row structure. Additionally, there is a strong resemblance to the experimental LEED I(E) profiles for the Cs/Pd{110}-(1 x 2) structure which has also been shown to exhibit the missing-row structure. On the basis of this evidence we conclude that the CO/Pd{110}-(4 x 2) LEED pattern arises from a missing-row reconstruction of the Pd{110} surface which gives rise to a strong underlying (1 x 2) pattern plus a poorly ordered CO overlayer which produces weak, diffuse fourth-order spots in the LEED pattern.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Affiche de projet terminal, baccalauréat en Urbanisme. Institut d'urbanisme, Université de Montréal.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Cette thèse contribue à une théorie générale de la conception du projet. S’inscrivant dans une demande marquée par les enjeux du développement durable, l’objectif principal de cette recherche est la contribution d’un modèle théorique de la conception permettant de mieux situer l’utilisation des outils et des normes d’évaluation de la durabilité d’un projet. Les principes fondamentaux de ces instruments normatifs sont analysés selon quatre dimensions : ontologique, méthodologique, épistémologique et téléologique. Les indicateurs de certains effets contre-productifs reliés, en particulier, à la mise en compte de ces normes confirment la nécessité d’une théorie du jugement qualitatif. Notre hypothèse principale prend appui sur le cadre conceptuel offert par la notion de « principe de précaution » dont les premières formulations remontent du début des années 1970, et qui avaient précisément pour objectif de remédier aux défaillances des outils et méthodes d’évaluation scientifique traditionnelles. La thèse est divisée en cinq parties. Commençant par une revue historique des modèles classiques des théories de la conception (design thinking) elle se concentre sur l’évolution des modalités de prise en compte de la durabilité. Dans cette perspective, on constate que les théories de la « conception verte » (green design) datant du début des années 1960 ou encore, les théories de la « conception écologique » (ecological design) datant des années 1970 et 1980, ont finalement convergé avec les récentes théories de la «conception durable» (sustainable design) à partir du début des années 1990. Les différentes approches du « principe de précaution » sont ensuite examinées sous l’angle de la question de la durabilité du projet. Les standards d’évaluation des risques sont comparés aux approches utilisant le principe de précaution, révélant certaines limites lors de la conception d’un projet. Un premier modèle théorique de la conception intégrant les principales dimensions du principe de précaution est ainsi esquissé. Ce modèle propose une vision globale permettant de juger un projet intégrant des principes de développement durable et se présente comme une alternative aux approches traditionnelles d’évaluation des risques, à la fois déterministes et instrumentales. L’hypothèse du principe de précaution est dès lors proposée et examinée dans le contexte spécifique du projet architectural. Cette exploration débute par une présentation de la notion classique de «prudence» telle qu’elle fut historiquement utilisée pour guider le jugement architectural. Qu’en est-il par conséquent des défis présentés par le jugement des projets d’architecture dans la montée en puissance des méthodes d’évaluation standardisées (ex. Leadership Energy and Environmental Design; LEED) ? La thèse propose une réinterprétation de la théorie de la conception telle que proposée par Donald A. Schön comme une façon de prendre en compte les outils d’évaluation tels que LEED. Cet exercice révèle cependant un obstacle épistémologique qui devra être pris en compte dans une reformulation du modèle. En accord avec l’épistémologie constructiviste, un nouveau modèle théorique est alors confronté à l’étude et l’illustration de trois concours d'architecture canadienne contemporains ayant adopté la méthode d'évaluation de la durabilité normalisée par LEED. Une série préliminaire de «tensions» est identifiée dans le processus de la conception et du jugement des projets. Ces tensions sont ensuite catégorisées dans leurs homologues conceptuels, construits à l’intersection du principe de précaution et des théories de la conception. Ces tensions se divisent en quatre catégories : (1) conceptualisation - analogique/logique; (2) incertitude - épistémologique/méthodologique; (3) comparabilité - interprétation/analytique, et (4) proposition - universalité/ pertinence contextuelle. Ces tensions conceptuelles sont considérées comme autant de vecteurs entrant en corrélation avec le modèle théorique qu’elles contribuent à enrichir sans pour autant constituer des validations au sens positiviste du terme. Ces confrontations au réel permettent de mieux définir l’obstacle épistémologique identifié précédemment. Cette thèse met donc en évidence les impacts généralement sous-estimés, des normalisations environnementales sur le processus de conception et de jugement des projets. Elle prend pour exemple, de façon non restrictive, l’examen de concours d'architecture canadiens pour bâtiments publics. La conclusion souligne la nécessité d'une nouvelle forme de « prudence réflexive » ainsi qu’une utilisation plus critique des outils actuels d’évaluation de la durabilité. Elle appelle une instrumentalisation fondée sur l'intégration globale, plutôt que sur l'opposition des approches environnementales.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A quantitative low energy electron diffraction (LEED) analysis has been performed for the p(2 x 2)-S and c(2 x 2)-S surface structures formed by exposing the (1 x 1) phase of Ir{100} to H2S at 750 K. S is found to adsorb on the fourfold hollow sites in both structures leading to Pendry R-factor values of 0.17 for the p(2 x 2)-S and 0.16 for the c(2 x 2)-S structures. The distances between S and the nearest and next-nearest Ir atoms were found to be similar in both structures: 2.36 +/- 0.01 angstrom and 3.33 +/- 0.01 angstrom, respectively. The buckling in the second substrate layer is consistent with other structural studies for S adsorption on fcc{100} transition metal surfaces: 0.09 angstrom for p(2 x 2)-S and 0.02 angstrom for c(2 x 2)-S structures. The (1 x 5) reconstruction, which is the most stable phase for clean Ir{100}, is completely lifted and a c(2 x 2)-S overlayer is formed after exposure to H,S at 300 K followed by annealing to 520 K. CO temperature-programmed desorption (TPD) experiments indicate that the major factor in the poisoning of Ir by S is site blocking. (c) 2005 Elsevier B.V. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The structure of the chiral kinked Pt{531} surface has been determined by low-energy electron diffraction intensity-versus-energy (LEED-IV) analysis and density functional theory (DFT). Large contractions and expansions of the vertical interlayer distances with respect to the bulk-terminated surface geometry were found for the first six layers (LEED: d(12) = 0.44 angstrom, d(23) = 0.69 angstrom, d(34) = 0.49 angstrom, d(45) = 0.95 angstrom, d(56) = 0.56 angstrom; DFT: d(12) = 0.51 angstrom, d(23) = 0.55 angstrom, d(34) = 0.74 angstrom, d(45) = 0.78 angstrom, d(56) = 0.63 angstrom; d(bulk) = 0.66 angstrom). Energy-dependent cancellations of LEED spots over unusually large energy ranges, up to 100 eV, can be explained by surface roughness and reproduced by applying a model involving 0.25 ML of vacancies and adatoms in the scattering calculations. The agreement between the results from LEED and DFT is not as good as in other cases, which could be due to this roughness of the real surface.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Two different ways of performing low-energy electron diffraction (LEED) structure determinations for the p(2 x 2) structure of oxygen on Ni {111} are compared: a conventional LEED-IV structure analysis using integer and fractional-order IV-curves collected at normal incidence and an analysis using only integer-order IV-curves collected at three different angles of incidence. A clear discrimination between different adsorption sites can be achieved by the latter approach as well as the first and the best fit structures of both analyses are within each other's error bars (all less than 0.1 angstrom). The conventional analysis is more sensitive to the adsorbate coordinates and lateral parameters of the substrate atoms whereas the integer-order-based analysis is more sensitive to the vertical coordinates of substrate atoms. Adsorbate-related contributions to the intensities of integer-order diffraction spots are independent of the state of long-range order in the adsorbate layer. These results show, therefore, that for lattice-gas disordered adsorbate layers, for which only integer-order spots are observed, similar accuracy and reliability can be achieved as for ordered adsorbate layers, provided the data set is large enough.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Despite a number of earlier studies which seemed to confirm molecular adsorption of water on close-packed surfaces of late transition metals, new controversy has arisen over a recent theoretical work by Feibelman, according to which partial dissociation occurs on the Ru{0001} surface leading to a mixed (H2O + OH + H) superstructure. Here, we present a refined LEED-IV analysis of the (root3 x root3)R30degrees-D2O-Ru{0001} structure, testing explicitly this new model by Feibelman. Our results favour the model proposed earlier by Held and Menzel assuming intact water molecules with almost coplanar oxygen atoms and out-of-plane hydrogen atoms atop the slightly higher oxygen atoms. The partially dissociated model with an almost identical arrangement of oxygen atoms can, however, not unambiguously be excluded, especially when the single hydrogen atoms are not present in the surface unit cell. In contrast to the earlier LEED-IV analysis, we can, however, clearly exclude a buckled geometry of oxygen atoms.