CHEMICAL COMPOSITION AND ANTIMICROBIAL ACTIVITY OF ESSENTIAL OILS OF LAVANDULA SPP.

Lavenders belong to the family Labiatae and represent some of the most popular medicinal plants of great economic importance. Their essential oils are important for the perfume, cosmetic, flavouring and pharmaceutical industries. However, despite its popularity, and the long tradition of use, biological properties of the various Lavandula species are not yet been well sustained by scientific or clinical studies and some available data being inconclusive and controversial [1]. Although Lavandula spp. have similar ethnobotanical properties, however, chemical composition and therapeutic uses differ from different species and main composition of essential oils showed differences with species and with the region were they grow [1,2,3]. L. stoechas L. subsps. luisieri (Rozeira) Rozeira. L. pedunculata (Mill.) Cav. and L. viridis L’Hér are endemic to the Iberian Peninsula, widespread in the South of Portugal, namely in Alentejo and Algarve. In our work, essential oils from the stems or leaves from wild grown plants of L. luisieri (Alentejo), L. pedunculata (Alentejo) and L. viridis (Algarve), were extracted by hydrodistillation and analyzed by GC-FID. Antimicrobial activity was evaluated by solid diffusion disk assay and minimal inhibitory concentration (MIC) against pathogenic Gram-positive and Gram-negative bacteria and food spoilage fungi.

Caracterização química e actividade biológica dos óleos essenciais e extractos aquosos de algumas Lavandula spp. do Sul de Portugal

No presente trabalho estudaram-se três espécies do género Lavandula, do sul de Portugal: L. luisieri e L. pedunculata (Alentejo) e L.viridis (Algarve), com vista caraterizar a composição química dos óleos essenciais das diferentes espécies, parte vegetativa (folha) e espiga floral, e dos respetivos extratos de hidrodestilação, e avaliar as propriedades antioxidante, antimicrobiana, toxicológica, analgésica e antiinflamatória de alguns dos seus óleos essenciais e extratos aquosos, mais promissores. Os resultados mostraram importantes diferenças na composição química dos óleos essenciais, quanto à diversidade e à proporção dos seus constituintes. Os óleos essenciais e hidrolatos, em estudo, apresentaram importantes propriedades antioxidantes e antimicrobianas. Os estudos toxicológicos e farmacológicos mostraram que os óleos apresentaram citotoxicidade em Artemia salina, apresentaram valores de DL50 muito superiores a 2000 mg/kg em ratinhos Swiss, e que possuem importantes propriedades analgésicas e anti-inflamatória. Estes resultados sugerem o seu potencial uso para aplicações farmacológicas como agentes nutracêuticos e/ou fitoterapêuticos; ABSTRACT:The aim of present work was to develop a set of studies of three species of the genera Lavandula, at the South of Portugal: L. luisieri e L. pedunculata (Alentejo) e L.viridis (Algarve), in order to characterize the chemical composition of the essential oils (leaves and flowers) and to evaluate the antioxidant, antimicrobial, toxicological and pharmacological properties of selected essential oils and aqueous extracts. Results show important differences in chemical composition of essential oils, both in diversity as the proportion of their constituents. Essential oils and aqueous extracts of different Lavandula spp. showed important antimicrobial and antioxidant properties. Pharmacological studies have shown that essential oils showed cytotoxicity against Artemia salina, low acute toxicity, with LD50 >> 2000 mg/kg for mice, and important analgesic and anti-inflammatory properties. These results suggest their potential use for pharmacological applications as nutraceutical and/or phytotherapeutic agents.

COMMON GOOSE BARNACLES LEPAS AUSTRALIS (THORACICA, PEDUNCULATA) ON DECEASED MAGELLANIC PENGUINS SPHENISCUS MAGELLANICUS (AVES)

Fundacao de Amparo a Pesquisa do Estado de Sao Paulo (FAPESP)

Estudio de los robledales de Q. pedunculata Ehrh., Q. sessiliflora Salisb., zona de Asturias

El presente proyecto comprende el estudio de los montes siguientes: -" Monte de Pomar y San Félix de las Montañas" -" Monte de Fuentes de l a s Montañas" -“Monte de Monasterio de Goto" -" Monte de Vega de Orreo" -" Monte de Combo" -“Monte de Valde buoyes" -" Monte' de M u ñ i d l o s" -" Monte del Pueblo de Rengos" -“Montes de Larony La Viliella " -" Montes de Degaña y Cerredo" -" Monte de Monasterio de Hermo" de los cuales los diez primeros están poblados por roble y el ultimo por haya.

Towards executable specification : combining i* and AgentSpeak(L).

Agent-oriented conceptual modelling (AoCM) approaches in Requirements Engineering (RE) have received considerable attention recently. Semi-formal modeling frameworks such as i* assist analysts in requirements elicitation and reasoning of early-phase RE. AgentSpeak(L) is a widely accepted agent programming language. The Strategic Rationale (SR) model of the i* framework naturally lends itself to AgentSpeak(L) programs. Furthermore, the Strategic Dependency (SD) component of the i* framework prescribes the interaction between the agents in a multi-agent environment. This paper proposes a formal methodology for transforming a SR model to an AgentS- peak(L) agent. The constructed AgentSpeak(L) agents will then form the essential components of a multi-agent system, MAS.

Enhanced human bone marrow stromal cell affinity for modified poly(L-lactide) surfaces by the upregulation of adhesion molecular genes

To enhance and regulate cell affinity for poly (l-lactic acid) (PLLA) based materials, two hydrophilic ligands, poly (ethylene glycol) (PEG) and poly (l-lysine) (PLL), were used to develop triblock copolymers: methoxy-terminated poly (ethylene glycol)-block-poly (l-lactide)-block-poly (l-lysine) (MPEG-b-PLLA-b-PLL) in order to regulate protein absorption and cell adhesion. Bone marrow stromal cells (BMSCs) were cultured on different composition of MPEG-b-PLLA-b-PLL copolymer films to determine the effect of modified polymer surfaces on BMSC attachment. To understand the molecular mechanism governing the initial cell adhesion on difference polymer surfaces, the mRNA expression of 84 human extracellular matrix (ECM) and adhesion molecules was analysed using quantitative reverse transcriptase polymerase chain reaction (qRT-PCR). It was found that down regulation of adhesion molecules was responsible for the impaired BMSC attachment on PLLA surface. MPEG-b-PLLA-b-PLL copolymer films improved significantly the cell adhesion and cytoskeleton expression by upregulation of relevant molecule genes significantly. Six adhesion genes (CDH1, ITGL, NCAM1, SGCE, COL16A1, and LAMA3) were most significantly influenced by the modified PLLA surfaces. In summary, polymer surfaces altered adhesion molecule gene expression of BMSCs, which consequently regulated cell initial attachment on modified PLLA surfaces.

Synthesis of 4-arm star poly(L-Lactide) oligomers using an in situ-generated calcium-based initiator

Using an in situ-generated calcium-based initiating species derived from pentaerythritol, the bulk synthesis of well-defined 4-arm star poly(L-lactide) oligomers has been studied in detail. The substitution of the traditional initiator, stannous octoate with calcium hydride allowed the synthesis of oligomers that had both low PDIs and a comparable number of polymeric arms (3.7 – 3.9) to oligomers of similar molecular weight. Investigations into the degree of control observed during the course of the polymerization found that the insolubility of pentaerythritol in molten L-lactide resulted in an uncontrolled polymerization only when the feed mole ratio of L-lactide to pentaerythritol was 13. At feed ratios of 40 and greater, a pseudo-living polymerization was observed. As part of this study, in situ FT-Raman spectroscopy was demonstrated to be a suitable method to monitor the kinetics of the ring-opening polymerization (ROP) of lactide. The advantages of using this technique rather than FT-IR-ATR and 1H NMR for monitoring L-lactide consumption during polymerization are discussed.

L'étendue internationale des nouvelles firmes de hautes technologies: le rôle du capital humain et de l'intention stratégique des fondateurs

De récentes recherches ont mis l’accent sur l’importance pour les nouvelles entreprises internationales de l’existence de ressources et de compétences spécifiques. La présente recherche, qui s’inscrit dans ce courant, montre en particulier l’importance du capital humain acquis par les entrepreneurs sur base de leur expérience internationale passée. Mais nous montrons en même temps que ces organisations sont soutenues par une intention délibérée d’internationalisation dès l’origine. Notre recherche empirique est basée sur l’analyse d’un échantillon de 466 nouvelles entreprises de hautes technologies anglaises et allemandes. Nous montrons que ce capital humain est un actif qui facilite la pénétration rapide des marchés étrangers, et plus encore quand l’entreprise nouvelle est accompagnée d’une intention stratégique délibérée d’internationalisation. Des conclusions similaires peuvent être étendues au niveau des ressources que l’entrepreneur consacre à la start-up : plus ces ressources sont importantes, plus le processus d’internationalisation tend à se faire à grande échelle ; et là aussi, l’influence de ces ressources est augmenté par l’intention stratégique d’internationalisation. Dans le cadre des études empiriques sur les born-globals (entreprises qui démarrent sur un marché globalisé), cette recherche fournit une des premières études empiriques reliant l’influence des conditions initiales de création aux probabilités de croissance internationale rapide.

Three-dimensional hydrogen-bonded structures in the 1:1 proton-transfer compounds of L-tartaric acid with the associative-group monosubstituted pyridines 3-minopyridine, 3-carboxypyridine (nicotinic acid) and 2-carboxypyridine (picolinic acid).

The 1:1 proton-transfer compounds of L-tartaric acid with 3-aminopyridine [3-aminopyridinium hydrogen (2R,3R)-tartrate dihydrate, C5H7N2+·C4H5O6-·2H2O, (I)], pyridine-3-carboxylic acid (nicotinic acid) [anhydrous 3-carboxypyridinium hydrogen (2R,3R)-tartrate, C6H6NO2+·C4H5O6-, (II)] and pyridine-2-carboxylic acid [2-carboxypyridinium hydrogen (2R,3R)-tartrate monohydrate, C6H6NO2+·C4H5O6-·H2O, (III)] have been determined. In (I) and (II), there is a direct pyridinium-carboxyl N+-HO hydrogen-bonding interaction, four-centred in (II), giving conjoint cyclic R12(5) associations. In contrast, the N-HO association in (III) is with a water O-atom acceptor, which provides links to separate tartrate anions through Ohydroxy acceptors. All three compounds have the head-to-tail C(7) hydrogen-bonded chain substructures commonly associated with 1:1 proton-transfer hydrogen tartrate salts. These chains are extended into two-dimensional sheets which, in hydrates (I) and (III) additionally involve the solvent water molecules. Three-dimensional hydrogen-bonded structures are generated via crosslinking through the associative functional groups of the substituted pyridinium cations. In the sheet struture of (I), both water molecules act as donors and acceptors in interactions with separate carboxyl and hydroxy O-atom acceptors of the primary tartrate chains, closing conjoint cyclic R44(8), R34(11) and R33(12) associations. Also, in (II) and (III) there are strong cation carboxyl-carboxyl O-HO hydrogen bonds [OO = 2.5387 (17) Å in (II) and 2.441 (3) Å in (III)], which in (II) form part of a cyclic R22(6) inter-sheet association. This series of heteroaromatic Lewis base-hydrogen L-tartrate salts provides further examples of molecular assembly facilitated by the presence of the classical two-dimensional hydrogen-bonded hydrogen tartrate or hydrogen tartrate-water sheet substructures which are expanded into three-dimensional frameworks via peripheral cation bifunctional substituent-group crosslinking interactions.

Carbodiimide-mediated synthesis of poly(L-lactide)-based networks

Poly(L-lactide-co-succinic anhydride) networks were synthesised via the carbodiimide-mediated coupling of poly(L-lactide) (PLLA) star polymers. When 4-(dimethylamino)pyridine (DMAP) alone was used as the catalyst gelation did not occur. However, when 4-(dimethylamino)pyridinium p-toluenesulfonate (DPTS), the salt of DMAP and p-toluenesulfonic acid (PTSA), was the catalyst, the networks obtained had gel fractions comparable to those which were reported for networks synthesised by conventional methods. Greater gel fractions and conversion of the prepolymer terminal hydroxyl groups were observed when the hydroxyl-terminated star prepolymers reacted with succinic anhydride in a one-pot procedure than when the hydroxyl-terminated star prepolymers reacted with presynthesised succinic-terminated star prepolymers. The thermal properties of the networks, glass transition temperature (Tg), melting temperature (Tm) and crystallinity (Xc) were all strongly influenced by the average molecular weights between the crosslinks ((M_c). The network with the smallest (M_c )(1400 g/mol) was amorphous and had a Tg of 59 °C while the network with the largest (M_c ) (7800 g/mol) was 15 % crystalline and had a Tg of 56 °C.