Lignoselluloosapohjaisten väkevähappohydrolysaattien jatkuvatoiminen kromatografinen fraktiointi

Työssä tutkittiin lignoselluloosapohjaisten väkevähappohydrolysaattien (monosakkaridit, rikki- ja etikkahppo) jatkuvatoimista kromatografista fraktiointia käyttäen Japan Organo SMB -prosessia. Adsorbenttinä toimi happomuotoinen (H+) vahva kationinvaihtohartsi. Panostoimista fraktiointia käytettiin vertailukohtana. Jatkuvatoimisen prosessin optimoinnilla saavutettiin monosakkaridien suurimmaksi tuottavuudeksi 283 mol/(m3 h) (panosprosessille 145 mol/(m3 h). JO-prosessilla saavutettiin korkeat rikki- ja etikkahapon saannot: 97,3 % ja 93,5 %. Monosakkaridisaanto jäi hieman alhaisemmaksi (61,7 %) johtuen monosakkaridi- ja rikkihappo-profiilien hankalasta erottamisesta. Ulostulo virtojen puhtaudet olivat korkeat: 89 % monosakkarideille, 89 % rikkihapolle ja 100 % etikkahapolle.

Chromatographic recovery of chemicals from acidic biomass hydrolysates

Lignocellulosic biomasses (e.g., wood and straws) are a potential renewable source for the production of a wide variety of chemicals that could be used to replace those currently produced by petrochemical industry. This would lead to lower greenhouse gas emissions and waste amounts, and to economical savings. There are many possible pathways available for the manufacturing of chemicals from lignocellulosic biomasses. One option is to hydrolyze the cellulose and hemicelluloses of these biomasses into monosaccharides using concentrated sulfuric acid as catalyst. This process is an efficient method for producing monosaccharides which are valuable platforn chemicals. Also other valuable products are formed in the hydrolysis. Unfortunately, the concentrated acid hydrolysis has been deemed unfeasible mainly due to high chemical consumption resulting from the need to remove sulfuric acid from the obtained hydrolysates prior to the downstream processing of the monosaccharides. Traditionally, this has been done by neutralization with lime. This, however, results in high chemical consumption. In addition, the by-products formed in the hydrolysis are not removed and may, thus, hinder the monosaccharide processing. In order to improve the feasibility of the concentrated acid hydrolysis, the chemical consumption should be decreased by recycling of sulfuric acid without neutralization. Furthermore, the monosaccharides and the other products formed in the hydrolysis should be recovered selectively for efficient downstream processing. The selective recovery of the hydrolysis by-products would have additional economical benefits on the process due to their high value. In this work, the use of chromatographic fractionation for the recycling of sulfuric acid and the selective recovery of the main components from the hydrolysates formed in the concentrated acid hydrolysis was investigated. Chromatographic fractionation based on the electrolyte exclusion with gel type strong acid cation exchange resins in acid (H+) form as a stationary phase was studied. A systematic experimental and model-based study regarding the separation task at hand was conducted. The phenomena affecting the separation were determined and their effects elucidated. Mathematical models that take accurately into account these phenomena were derived and used in the simulation of the fractionation process. The main components of the concentrated acid hydrolysates (sulfuric acid, monosaccharides, and acetic acid) were included into this model. Performance of the fractionation process was investigated experimentally and by simulations. Use of different process options was also studied. Sulfuric acid was found to have a significant co-operative effect on the sorption of the other components. This brings about interesting and beneficial effects in the column operations. It is especially beneficial for the separation of sulfuric acid and the monosaccharides. Two different approaches for the modelling of the sorption equilibria were investigated in this work: a simple empirical approach and a thermodynamically consistent approach (the Adsorbed Solution theory). Accurate modelling of the phenomena observed in this work was found to be possible using the simple empirical models. The use of the Adsorbed Solution theory is complicated by the nature of the theory and the complexity of the studied system. In addition to the sorption models, a dynamic column model that takes into account the volume changes of the gel type resins as changing resin bed porosity was also derived. Using the chromatography, all the main components of the hydrolysates can be recovered selectively, and the sulfuric acid consumption of the hydrolysis process can be lowered considerably. Investigation of the performance of the chromatographic fractionation showed that the highest separation efficiency in this separation task is obtained with a gel type resin with a high crosslinking degree (8 wt. %); especially when the hydrolysates contain high amounts of acetic acid. In addition, the concentrated acid hydrolysis should be done with as low sulfuric acid concentration as possible to obtain good separation performance. The column loading and flow rate also have large effects on the performance. In this work, it was demonstrated that when recycling of the fractions obtained in the chromatographic fractionation are recycled to preceding unit operations these unit operations should included in the performance evaluation of the fractionation. When this was done, the separation performance and the feasibility of the concentrated acid hydrolysis process were found to improve considerably. Use of multi-column chromatographic fractionation processes, the Japan Organo process and the Multi-Column Recycling Chromatography process, was also investigated. In the studied case, neither of these processes could compete with the single-column batch process in the productivity. However, due to internal recycling steps, the Multi-Column Recycling Chromatography was found to be superior to the batch process when the product yield and the eluent consumption were taken into account.

Optimal design and operation of compact simulated moving bed processes for enantioseparations

Simulated moving bed (SMB) chromatography is attracting more and more attention since it is a powerful technique for complex separation tasks. Nowadays, more than 60% of preparative SMB units are installed in the pharmaceutical and in the food in- dustry [SDI, Preparative and Process Liquid Chromatography: The Future of Process Separations, International Strategic Directions, Los Angeles, USA, 2002. http://www. strategicdirections.com]. Chromatography is the method of choice in these ¯elds, be- cause often pharmaceuticals and ¯ne-chemicals have physico-chemical properties which di®er little from those of the by-products, and they may be thermally instable. In these cases, standard separation techniques as distillation and extraction are not applicable. The noteworthiness of preparative chromatography, particulary SMB process, as a sep- aration and puri¯cation process in the above mentioned industries has been increasing, due to its °exibility, energy e±ciency and higher product purity performance. Consequently, a new SMB paradigm is requested by the large number of potential small- scale applications of the SMB technology, which exploits the °exibility and versatility of the technology. In this new SMB paradigm, a number of possibilities for improving SMB performance through variation of parameters during a switching interval, are pushing the trend toward the use of units with smaller number of columns because less stationary phase is used and the setup is more economical. This is especially important for the phar- maceutical industry, where SMBs are seen as multipurpose units that can be applied to di®erent separations in all stages of the drug-development cycle. In order to reduce the experimental e®ort and accordingly the coast associated with the development of separation processes, simulation models are intensively used. One impor- tant aspect in this context refers to the determination of the adsorption isotherms in SMB chromatography, where separations are usually carried out under strongly nonlinear conditions in order to achieve higher productivities. The accurate determination of the competitive adsorption equilibrium of the enantiomeric species is thus of fundamental importance to allow computer-assisted optimization or process scale-up. Two major SMB operating problems are apparent at production scale: the assessment of product quality and the maintenance of long-term stable and controlled operation. Constraints regarding product purity, dictated by pharmaceutical and food regulatory organizations, have drastically increased the demand for product quality control. The strict imposed regulations are increasing the need for developing optically pure drugs.(...)

A Bridge Builder or a Raconteur? How Japan Manoeuvres the Global Development Discourse within the TICAD Process

Japan has been a major actor in the field of development cooperation for five decades, even holding the title of largest donor of Official Development Assistance (ODA) during the 1990s. Financial flows, however, are subject to pre-existing paradigms that dictate both donor and recipient behaviour. In this respect Japan has been left wanting for more recognition. The dominance of the so called ‘Washington Consensus’ embodied in the International Monetary Fund (IMF) and the World Bank has long circumvented any indigenous approaches to development problems. The Tokyo International Conference on African Development (TICAD) is a development cooperation conference that Japan has hosted since 1993 every five years. As the main organizer of the conference Japan has opted for the leading position of African development. This has come in the wake of success in the Asian region where Japan has called attention to its role in the so called ‘Asian Miracle’ of fast growing economies. These aspirations have enabled Japan to try asserting itself as a major player in directing the course of global development discourse using historical narratives from both Asia and Africa. Over the years TICAD has evolved into a continuous process with ministerial and follow-up meetings in between conferences. Each conference has produced a declaration that stipulates the way the participants approach the question of African development. Although a multilateral framework, Japan has over the years made its presence more and more felt within the process. This research examines the way Japan approaches the paradigms of international development cooperation and tries to direct them in the context of the TICAD process. Supplementing these questions are inquiries concerning Japan’s foreign policy aspirations. The research shows that Japan has utilized the conference platform to contest other development actors and especially the dominant forces of the IMF and the World Bank in development discourse debate. Japan’s dominance of the process is evident in the narratives found in the conference documents. Relative success has come about by remaining consistent as shown by the acceptance of items from the TICAD agenda in other forums, such as the G8. But the emergence of new players such as China has changed the playing field, as they are engaging other developing countries from a more equal level.

High Carbon Ferro-chromium Production by Self-reducing Process: Effects of Fe-Si and Fluxing Agent Additions

The technology of self-reducing pellets for ferro-alloys production is becoming an emerging process due to the lower electric energy consumption and the improvement of metal recovery in comparison with the traditional process. This paper presents the effects of reduction temperature, addition of ferro-silicon and addition of slag forming agents for the production of high carbon ferro-chromium by utilization of self-reducing pellets. These pellets were composed of Brazilian chromium ore (chromite) concentrate, petroleum coke, Portland cement, ferro-silicon and slag forming components (silica and hydrated lime). The pellets were processed at 1 773 K, 1 823 K and 1 873 K using an induction furnace. The products obtained, containing slag and metallic phases, were analyzed by scanning electron microscopy and chemical analyses (XEDS). A large effect on the reduction time was observed by increasing the temperature from 1 773 K to 1 823 K for pellets without Fe-Si addition: around 4 times faster at 1 823 K than at 1 773 K for reaction fraction close to one. However, when the temperature was further increased from 1 823 K to 1 873 K the kinetics improved by double. At 1 773 K, the addition of 2% of ferro-silicon in the pellet resulted in an increasing reaction rate of around 6 times, in comparison with agglomerate without it. The addition of fluxing agents (silica and lime), which form initial slag before the reduction is completed, impaired the full reduction. These pellets became less porous after the reduction process.

Podzolization as a deferralitization process: dynamics and chemistry of ground and surface waters in an Acrisol-Podzol sequence of the upper Amazon Basin

Hydrochemical processes involved in the development of hydromorphic Podzols are a major concern for the upper Amazon Basin because of the extent of the areas affected by such processes and the large amounts of organic carbon and associated metals exported to the rivers. The dynamics and chemical composition of ground and surface waters were studied along an Acrisol-Podzol sequence lying in an open depression of a plateau. Water levels were monitored along the sequence over a period of 2 years by means of piezometers. Water was sampled in zero-tension lysimeters for groundwater and for surface water in the drainage network of the depression. The pH and concentrations of organic carbon and major elements (Si, Fe and Al) were determined. The contrasted changes reported for concentrations of Si, organic carbon and metals (Fe, Al) mainly reflect the dynamics of the groundwater and the weathering conditions that prevail in the soils. Iron is released by the reductive dissolution of Fe oxides, mostly in the Bg horizons of the upslope Acrisols. It moves laterally under the control of hydraulic gradients and migrates through the iron-depleted Podzols where it is exported to the river network. Aluminium is released from the dissolution of Al-bearing minerals (gibbsite and kaolinite) at the margin of the podzolic area but is immobilized as organo-Al complexes in spodic horizons. In downslope positions, the quick recharge of the groundwater and large release of organic compounds lead to acidification and a loss of metals (mainly Al), previously stored in the Podzols.

Compact SMB chromatography for binary separation

A thesis submitted for the degree of Doctor of Philosophy

Cultural differences affecting claim handling process and perceived quality in Finnish-Japanese paperboardbusiness

Tutkimuksen tavoitteena oli selvittää Suomen ja Japanin välisten kulttuurierojen vaikutus valitustenkäsittelyprosessiin ja laatukäsityksiin case-yrityksen ja sen asiakkaiden välillä. Teoreettisen viitekehyksen muodostamisessa käytettiin näkemyksiä kulttuurista, kulttuurienvälisestä viestinnästä, valitustenkäsittelystä ja laatukäsityksistä. Kulttuurierojen tarkastelemiseksi esiteltiin kulttuurien ulottuvuuksia eritteleviä viitekehyksiä ja kulturaalisten tekijöiden vaikutusta viestintään. Suomen ja Japanin kulttuureja esiteltiin myös yksityiskohtaisemmin aikaisempien tutkimusten valossa. Työn empiirisessä osassa tutkittiin case-yrityksen sisäisiä sekä yrityksen ja sen asiakkaiden välisiä näkemyseroja. Tutkimus suoritettiin laadullisena case-tutkimuksena, jossa tarkasteltiin myös toimenpiteitä case-yrityksen liiketoimintaympäristön parantamiseksi. Tarvittava tieto kerättiin kirjallisuudesta, artikkeleista, taustahaastatteluilla sekä haastattelemalla yrityksen henkilöstöä Suomessa ja Japanissa samoin kuin sen japanilaisia asiakkaita. Japanilaiset asiakas/toimittaja-suhteet ovat ulkomaalaiselle yritykselle haastava liiketoimintaympäristö. Luottamuksen rakentaminen pitkällä tähtäimellä vaatii läheistä kommunikointia vastapuolen tuntemiseksi, jotta voidaan kehittää tuotteita paremmiksi ja vähentää valituskustannuksia. Laatuajattelua tulee myös yhdenmukaistaa tuotteiden ja palvelujen laadun parantamiseksi.

Mobile Marketing in Japan

Mobiilimarkkinoinnin markkinat ovat vasta rakentumassa ja suurin osa alan toimijoista etenkin Suomessa yrittää vielä löytää rooliaan. Sen sijaan Japanissa sisällöntuotantoliiketoiminta matkapuhelimille kukoistaa ja mobiilimarkkinointi on jo saavuttanut merkittävän aseman mobiili-internetin palvelutarjonnassa. Toisin kuin Suomessa, jossa mobiilimarkkinat ovat vielä lastenkengissä, Japanissa myös mobiilimarkkinoinnin arvoketju on vähitellen muotoutumassa.Tämän tutkimuksen tavoitteena oli antaa käsitys Japanin mobiilimarkkinoinnin dynamiikasta ja luoda viitekehys operaattorin tulevalle roolille mobiilimarkkinoinnin markkinoiden rakentamisessa. Tutkimus on deskriptiivinen ja aineisto on kerätty alan kirjallisuudesta sekä haastattelemalla tärkeitä mobiilimarkkinoiden toimijoita Japanissa. Japanissa operaattoreilla (NTT DoCoMo, J-Phone ja KDDI) on erittäin vahva asema mobiili-internetin ja mobiilimarkkinoinnin markkinoilla. Ne hallitsevat asiakasrajapintaa, päättävät mobiiliverkon ja matkapuhelimien ominaisuuksista sekä siitä, ketkä sisällöntuottajista pääsevät osaksi heidän laskutusjärjestelmäänsä. Markkinoinnissa operaattoreilla ei ole yhtä näkyvää roolia. Omistussuhteiden kautta ne kuitenkin vaikuttavat lähes koko arvoketjuun. Operaattorit ovat yhdessä Japanin suurimpien mainostoimistojen kanssa luoneet tytäryhtiöitä, jotka hoitavat mainonnan operaattorin mobiiliportaalissa. Japanissa operaattori on ottanut hallitsevan roolin mobiilimarkkinoiden rakentamisessa. Tiivis yhteistyö eri toimijoiden, kuten matkapuhelinvalmistajien, sisällöntuottajien ja mainostoimistojen kanssa, on mahdollistanut kokonaisvaltaisen palvelupaketin tarjoamisen. Palvelupaketti sisältää käyttäjäystävällisen liittymän mobiili-internetiin sekä edulliset puhelimet. Juuri tiivis yhteistyö onkin ollut yksi tärkeimmistä menestystekijöistä Japanin markkinoita rakennettaessa. Mobiilimarkkinoita rakennettaessa operaattorilla on merkittävä rooli markkinoiden muodostajana ja sisällön kokoojana. Operaattorien tulee varautua roskapostin vastaiseen taisteluun, jos sähköpostia annetaan lähettää suoraan matkapuhelimeen. On erityisen tärkeää varmistaa, ettei käyttäjien tarvitse kärsiä roskapostista, muuten suoramarkkinoinnin mahdollisuus matkapuhelimeen menetetään. Ainoastaan aktiivisella edistämisellä ja osallistumisella mobiili-internetin sisällöntuotanto- ja markkinointiliiketoimintaan operaattori voi vahvistaa markkina-asemaansa ja varmistaa osuutensa tulevista markkinoista.

The determinants of capital intensity in Japan and the U.S

We estimate the determinants of capital intensity in Japan and the US, characterized by striking different paths. We augment an otherwise standard Constant Elasticity of Substitution (CES) model with demand-side considerations, which we find especially relevant in the US. In this augmented setting, the elasticity of substitution between capital and labor is placed around 0.85 in Japan, and 0.30 in the US. We also find evidence of biased technical change, which is capital-saving in Japan but labor-saving in the US. These differences help us explain the diverse experience in the capital deepening process of these economies, and lead us to conclude that demand-side drivers may also be relevant to account for different growth experiences. A close look at the nature of technological change is also needed before designing one-size-fits-all industrial, economic growth, and/or labor market policies.

AGRICULTURAL MACHINERY AND IMPLEMENTS DESIGN PROCESS: GUIDELINES FOR SMALL AND MID-SIZED BUSINESSES

ABSTRACT This study aims at presenting the process of machine design and agricultural implements by means of a reference model, formulated with the purpose of explaining the development activities of new products, serving as a guideline to coach human resources and to assist in formalizing the process in small and medium-sized businesses (SMB), i.e. up to 500 employees. The methodology used included the process modeling, carried out from case studies in the SMB, and the study of reference models in literature. The modeling formalism used was based on the IDEF0 standard, which identifies the dimensions required for the model detailing: input information; activities; tasks; knowledge domains; mechanisms; controls and information produced. These dimensions were organized in spreadsheets and graphs. As a result, a reference model with 27 activities and 71 tasks was obtained, distributed over four phases of the design process. The evaluation of the model was carried out by the companies participating in the case studies and by experts, who concluded that the model explains the actions needed to develop new products in SMB.

Rhetoric in international standard setting process: constructing accounting reality

The paper seeks to explore in depth the ways in which rhetorical strategies are employed in the international accounting standard setting process. The study proposes that rather than simply detailing new accounting requirements, the texts and drafts of accounting standards are artefacts, i.e. deliberately and carefully crafted products, that construct, persuade and encourage certain beliefs and behaviours. The persuasive and constructive strategies are also employed by the constituents submitting comment letters on the regulatory proposals. Consequently, the international accounting standard setting process is an ‘interactive process of meaning making’ (Fairclough, 1989). The study regards accounting as a social construct based on intersubjectivity (Searle, 1995; Davidson, 1990, 1994) and posits language as a constitutive factor in the process (Saussure, 1916; Peirce, 1931-58). This approach to the use of language and the role of rhetoric as a persuasive tool to convince others to our perception of ‘accounting reality’ is supported by the sociological work of Bourdieu (1990, 1991). Bourdieu has drawn our attention to how language becomes used, controlled, reformed and reconstituted by the social agents for the purposes of establishing their dominance. In our study we explore in particular the joint IASB and FASB proposals and subsequent regulations on the scope of consolidation and relevant disclosures that address issues of off-balance sheet financing, a subject that is very timely and of great topical importance. The analysis has revealed sophisticated rhetorical devices used by both the Boards and by the lobbyists. These reflect Aristotelian ethos, pathos and logos. The research demonstrates that those using accounting standards as well as those reading comment letters on the proposals for new standards should be aware of the normative nature of these documents and the subjectivity inherent in the nature of the text.

Constituents and antiulcer effect of Alchornea glandulosa: Activation of cell proliferation in gastric mucosa during the healing process

Alchornea glandulosa (Euphorbiaceae) is a plant used in folk medicine as an antiulcer agent. Rats pretreated with methanolic extract obtained from the leaves of A. glandulosa (AG) showed a dose-dependent effect and significant reduction of gastric ulcers induced by absolute ethanol at the doses of 500 (57%) and 1000 mg/kg (35%) in relation to the control group. Pretreatment of mice with AG (500, 1000 mg/kg, p.o.) showed dose-dependent activity and significantly decreased the severity of lesions caused by HCl/ethanol and by non steroidal anti inflammatory drug-induced gastric lesions. Pretreatment with AG also induced antisecretory action via local and systemic routes and a significant decrease in the total gastric acid content. The gastroprotective effects of AG involved the participation of nitric oxide and increased levels of endogenous sulfhydryl compounds, which are defensive mechanisms of the gastrointestinal mucosa against aggressive factors. The ability of AG to heal gastric ulcers was evaluated after 14 consecutive days of treatment. The results showed that single oral administrations of AG (250 mg/kg/once daily) potently stimulates gastric epithelial cell proliferation that contributes to the accelerated healing of gastric ulcers induced by acetic acid. In addition, no subacute toxicity (body weight gain, vital organs, and serum biochemical parameters) was observed during treatment with AG. Phytochemical investigation of AG led to the isolation of myricetin-3-O-alpha-L-rhamnopyranoside, quercetin-3-O-alpha-L-arabinopyranoside, quercetin-3-O-beta-D-galactopyranoside, quercetin, amentoflavone, methyl gallate, gallic acid, and pterogynidine. We also established the phytochemical profile of AG with the quantification of total phenolic compounds. These compounds may contribute to the observed antiulcerogenic effects of AG.

Podzolization as a deferralitization process: dynamics and chemistry of ground and surface waters in an Acrisol-Podzol sequence of the upper Amazon Basin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)