Contraction et décontraction des décharges micro-ondes entretenues à la pression atmosphérique

Les colonnes de plasma entretenues par un champ électrique (continu ou alternatif) à haute pression (p > 10 Torr) sont affectées par les phénomènes de contraction (réduction de la section radiale de la décharge) et de filamentation (fragmentation de la section de plasma en plusieurs filaments). La compréhension de ces phénomènes ainsi que le développement d’une méthode pouvant les supprimer demeurent une étape essentielle pour l’optimisation de certains procédés plasma. Dans cette optique, un premier objectif de notre travail était de déterminer les mécanismes à l’origine de la contraction et de la filamentation dans les décharges créées dans des gaz rares. Ainsi, nous avons montré que dans les plasmas micro-ondes contractés la cinétique de la décharge est contrôlée par les ions moléculaires et que la contraction est liée à l’influence du gradient de la température du gaz sur la concentration de ces ions. De plus, nous avons mis en évidence que la filamentation apparaît lorsque l’inhomogénéité radiale du champ électrique devient importante. Dans un second temps, nous avons développé une méthode de décontraction et de défilamentation de la décharge, qui consiste à ajouter à une décharge initiale de gaz rare des traces d’un autre gaz rare de plus faible potentiel d’ionisation. Dans le cas des plasmas décontractés, nous avons démontré que la cinétique de la décharge n’est plus contrôlée par les ions moléculaires, ce qui confirme bien l’importance de ces ions dans la description de la contraction. Pour terminer, nous avons étendu à la pression atmosphérique la technique d’absorption optique de mesure de densité des états métastables et résonnants à l’aide d’une lampe spectrale, ce qui n’avait été réalisé jusqu’ici que pour des pressions inférieures à 10 Torr. Ces états jouent un rôle essentiel dans l’ionisation des décharges contractées alors que dans les décharges décontractées leur désexcitation par les atomes du gaz adjuvant est l’étape fondamentale du processus de changement de cinétique menant à la décontraction.

Étude des déterminants moléculaires de la signalisation des récepteurs couplés aux protéines G et développement d'outils pour l'étude de l'effecteur bêta-arrestine.

Les récepteurs couplés aux protéines G (RCPG) constituent la plus grande famille de protéines membranaires du génome humain. Ils transmettent les signaux extracellulaires provenant de plusieurs stimuli comme les odeurs, les ions, les hormones et les neurotransmetteurs, à l'intérieur des cellules. En se liant aux RCPGs, ces molécules contribuent à la stabilisation des changements conformationnels activateurs qui se propagent jusqu'au domaine intracellulaire des récepteurs. Ces derniers engagent ensuite un ou plusieurs effecteurs, comme les protéines G hétérotrimériques et les β-arrestines (βarrs), qui activent une cascade d'événements moléculaires menant à la réponse cellulaire.Récemment, la publication de structures cristallines de RCPGs liant des ligands diffusibles a offert une opportunité de raffiner à une résolution atomique les modèles des mécanismes de transduction des signaux. Dans la première partie de cette thèse, nous avons donc exploré les déterminants de la signalisation du récepteur prototypique β2-adrénergique (β2AR), induite par les β-bloqueurs. En ne tenant compte que de leur efficacités sur le β2AR dans les voies de l'adénylate cyclase (AC) et des protéines kinases activées par les facteurs mitogéniques (MAPK), les β-bloqueurs peuvent être classés en 3 groupes distincts (agoniste inverse AC / agoniste MAPK, antagoniste neutre AC / agoniste MAPK et agoniste inverse AC / agoniste inverse MAPK). Afin de déterminer le lien entre leur efficacité et leur mode de liaison, nous avons réalisé des expériences d'arrimages moléculaires in silico entre des β-bloqueurs de chacun des groupes et la structure cristalline du β2AR liée au carazolol. De manière intéressante, les ligands à l'intérieur d'un groupe partagent un mode de liaison, alors que ceux des ligands entre les groupes divergent, suggérant que le mode de liaison des β-bloqueurs pourrait être utilisé pour prédire leur l'efficacité. En accord avec cette hypothèse, nous avons prédit et confirmé l'efficacité agoniste MAPK du carazolol, un inverse agoniste AC du β2AR se liant au récepteur de manière similaire au groupe inverse agoniste AC / agoniste MAPK. De manière intéressante, le groupement aryl des ligands agonistes inverses agonistes AC / agoniste MAPK, le seul groupement chimique variable de ce groupe, est prédite pour lier la région des 3e et 5e hélices transmembranaires (TM3 et TM5). Nous avons donc émis l'hypothèse que cette région pourrait être un déterminant de l'efficacité de ces ligands. En accord avec cette dernière, la mutation de 2 résidus (T118I, S203A) localisés proches du site de liaison des groupements aryls des β-bloqueurs, prévient l'efficacité agoniste inverse de l'ICI-118551 sur la voie de l'AC sans affecter l'efficacité d'un agoniste, indiquant que cette région est importante pour la transmission de l'effet agoniste inverse, du moins sur la voie de l'AC. Les βarrs sont des protéines d'échafaudage qui coordonnent la formation de complexes avec plusieurs dizaines d'effecteurs de signalisation. Originalement identifiées pour leur rôle dans la désensibilisation et l'internalisation des RCPGs, elles sont aussi d'importants effecteurs de la signalisation des RCPGs indépendante des protéines G hétérotrimériques. Cependant, contrairement aux protéines G hétérotrimériques, il n'existe que peu d'outils pour les étudier. Ainsi, la deuxième partie de la thèse est dédiée au développement d'outils pour l'étude des βarrs. À cette fin, nous avons d'abord tenté de transposer une méthode de mesure de l'interaction entre 2 protéines par la technologie de transfert d'énergie de bioluminescence par résonance (BRET) en microscopie et chez des souris transgéniques afin de mesurer de manière subcellulaire et dans un contexte natif l'engagement de la βarr à des RCPGs. Ainsi, nous avons établi les preuves de principe que le BRET peut être utilisé pour localiser l'interaction entre la βarr et le récepteur de la vasopressine de type 2 (V2R) sur une cellule au microscope et pour détecter l'interaction entre la βarr et le β2AR sur des tissus de souris transgéniques exprimant ces protéines fusionnées avec des partenaires BRET. Finalement, il n'existe aucun inhibiteur pharmacologique ciblant les βarrs. Ainsi, grâce à la combinaison d'approches de criblage virtuel sur un modèle de la structure des βarrs et d'essais de validation cellulaire, nous avons développé un inhibiteur pharmacologique des βarrs. À l'aide de cet outil, nous avons confirmé l'implication des βarrs dans l'activation des MAPK par le V2R, mais aussi montré un nouveau rôle des βarrs dans le recyclage du β2AR. Les connaissances et outils développés dans cette thèse permettront de mieux comprendre les déterminants moléculaires de la signalisation des RCPGs et entre autres, grâce à des nouvelles approches pour étudier le rôle cellulaire et physiologique des βarrs.

Metal Ions Bound To The Human Milk Immunoglobulin A: Metalloproteomic Approach.

The presence of calcium, iron, and zinc bound to human milk secretory IgA (sIgA) was investigated. The sIgA components were first separated by two-dimensional polyacrylamide gel electrophoresis and then identified by electrospray ionization-tandem mass spectrometry (ESI MS MS). The metal ions were detected by flame atomic absorption spectrometry after acid mineralization of the spots. The results showed eight protein spots corresponding to the IgA heavy chain constant region. Another spot was identified as the transmembrane secretory component. Calcium was bound to both the transmembrane component and the heavy chain constant region, while zinc was bound to the heavy chain constant region and iron was not bound with the identified proteins. The association of a metal ion with a protein is important for a number of reasons, and therefore, the findings of the present study may lead to a better understanding of the mechanisms of action and of additional roles that sIgA and its components play in human milk.

Physiological implications of the regulation of vacuolar H+-ATPase by chloride ions

Vacuolar H+-ATPase is a large multi-subunit protein that mediates ATP-driven vectorial H+ transport across the membranes. It is widely distributed and present in virtually all eukaryotic cells in intracellular membranes or in the plasma membrane of specialized cells. In subcellular organelles, ATPase is responsible for the acidification of the vesicular interior, which requires an intraorganellar acidic pH to maintain optimal enzyme activity. Control of vacuolar H+-ATPase depends on the potential difference across the membrane in which the proton ATPase is inserted. Since the transport performed by H+-ATPase is electrogenic, translocation of H+-ions across the membranes by the pump creates a lumen-positive voltage in the absence of a neutralizing current, generating an electrochemical potential gradient that limits the activity of H+-ATPase. In many intracellular organelles and cell plasma membranes, this potential difference established by the ATPase gradient is normally dissipated by a parallel and passive Cl- movement, which provides an electric shunt compensating for the positive charge transferred by the pump. The underlying mechanisms for the differences in the requirement for chloride by different tissues have not yet been adequately identified, and there is still some controversy as to the molecular identity of the associated Cl--conducting proteins. Several candidates have been identified: the ClC family members, which may or may not mediate nCl-/H+ exchange, and the cystic fibrosis transmembrane conductance regulator. In this review, we discuss some tissues where the association between H+-ATPase and chloride channels has been demonstrated and plays a relevant physiologic role.

Photolysis of ferric ions in the presence of sulfate or chloride ions: implications for the photo-Fenton process

The photo-Fenton process (Fe(2+)/Fe(3+), H(2)O(2), UV light) is one of the most efficient and advanced oxidation processes for the mineralization of the organic pollutants of industrial effluents and wastewater. The overall rate of the photo-Fenton process is controlled by the rate of the photolytic step that converts Fe(3+) back to Fe(2+). In this paper, the effect of sulfate or chloride ions on the net yield of Fe(2+) during the photolysis of Fe(3+) has been investigated in aqueous solution at pH 3.0 and 1.0 in the absence of hydrogen peroxide. A kinetic model based on the principal reactions that occur in the system fits the data for formation of Fe(2+) satisfactorily. Both experimental data and model prediction show that the availability of Fe(2+) produced by photolysis of Fe(3+) is inhibited much more in the presence of sulfate ion than in the presence of chloride ion as a function of the irradiation time at pH 3.0.

Theory of small-signal ac response of a dielectric liquid containing two groups of ions

The analysis of Macdonald for electrolytes is generalized to the case in which two groups of ions are present. We assume that the electrolyte can be considered as a dispersion of ions in a dielectric liquid, and that the ionic recombination can be neglected. We present the differential equations governing the ionic redistribution when the liquid is subjected to an external electric field, describing the simultaneous diffusion of the two groups of ions in the presence of their own space charge fields. We investigate the influence of the ions on the impedance spectroscopy of an electrolytic cell. In the analysis, we assume that each group of ions have equal mobility, the electrodes perfectly block and that the adsorption phenomena can be neglected. In this framework, it is shown that the real part of the electrical impedance of the cell has a frequency dependence presenting two plateaux, related to a type of ambipolar and free diffusion coefficients. The importance of the considered problem on the ionic characterization performed by means of the impedance spectroscopy technique was discussed. (c) 2008 American Institute of Physics.

An apparatus for in situ spectroscopy of radiation damage of polymers by bombardment with high-energy heavy ions

A new target station providing Fourier transform infrared (FT-IR) spectroscopy and residual gas analysis (RGA) for in situ observation of ion-induced changes in polymers has been installed at the GSI Helmholtz Centre for Heavy Ion Research. The installations as well as first in situ measurements at room temperature are presented here. A foil of polyimide Kapton HN (R) was irradiated with 1.1 GeV Au ions. During irradiation several in situ FT-IR spectra were recorded. Simultaneously outgassing degradation products were detected with the RGA. In the IR spectra nearly all bands decrease due to the degradation of the molecular structure. In the region from 3000 to 2700 cm(-1) vibration bands of saturated hydrocarbons not reported in literature so far became visible. The outgassing experiments show a mixture of C(2)H(4), CO, and N(2) as the main outgassing components of polyimide. The ability to combine both analytical methods and the opportunity to measure a whole fluence series within a single experiment show the efficiency of the new setup. (C) 2011 American Institute of Physics. [doi:10.1063/1.3571301]

Strong reduction of V(4+) amount in vanadium oxide/hexadecylamine nanotubes by doping with Co(2+) and Ni(2+) ions: Electron paramagnetic resonance and magnetic studies

In this work we present a complete characterization and magnetic study of vanadium oxide/hexadecylamine nanotubes (VO(x)/Hexa NT's) doped with Co(2)+ and Ni(2+) ions. The morphology of the NT's has been characterized by transmission electron microscopy, while the metallic elements have been quantified by the instrumental neutron activation analysis technique. The static and dynamic magnetic properties were studied by collecting data of magnetization as a function of magnetic field and temperature and by electron paramagnetic resonance. At difference of the majority reports in the literature, we do not observe magnetic dimers in vanadium oxide nanotubes. Also, we observed that the incorporation of metallic ions (Co(2+), S = 3/2 and Ni(2+), S = 1) decreases notably the amount of V(4+) ions in the system, from 14-16% (nondoped case) to 2%-4%, with respect to the total vanadium atoms (fact corroborated by XPS experiments) anyway preserving the tubular nanostructure. The method to decrease the amount of V(4+) in the nanotubes improves considerably their potential technological applications as Li-ion batteries cathodes. (C) 2011 American Institute of Physics. [doi: 10.1063/1.3580252]

Effect of cerium (IV) ions on the anticorrosion properties of siloxane-poly(methyl methacrylate) based film applied on tin coated steel

This work investigates the influence of the addition of cerium (IV) ions on the anticorrosion properties of organic-inorganic hybrid coatings applied to passivated tin coated steel. In order to evaluate the specific effect of cerium (IV) addition on nanostructural features of the organic and inorganic phases of the hybrid coating, the hydrolytic polycondensation of silicon alkoxide and the radical polymerization of the methyl methacrylate (MMA) function were induced separately. The corrosion resistance of the coatings was evaluated by means of linear polarization, Tafel type curves and electrochemical impedance measurements. The impedance results obtained for the hybrid coatings were discussed based on an electrical equivalent circuit used to fit the experimental data. The electrochemical results clearly showed the improvement of the protective properties of the organic-inorganic hybrid coating mainly when the cerium (IV) was added to the organic phase solution precursor, which seemed to be due to the formation of a more uniform and densely reticulated siloxane-PMMA film. (C) 2010 Elsevier Ltd. All rights reserved.

Influence of cerium (IV) ions on the mechanism of organosilane polymerization and on the improvement of its barrier properties

In this work, the effect of cerium (IV) ammonium nitrate (CAN) addition on the polymerization of bis-[triethoxysilyl]ethane (BTSE) film applied on carbon steel was studied. The electrochemical characterization of the films was carried out in 0.1 mol L(-1) NaCl solution by open-circuit potential measurements, anodic and cathodic polarization curves and electrochemical impedance spectroscopy (EIS). Morphological and chemical characterization were performed by atomic force microscopy (AFM), contact angle measurements, infrared-spectroscopy, nuclear magnetic resonance and thermogravimetric analysis. The results have clearly shown the improvement on the protective properties of the Ce(4+) modified film as a consequence of the formation of a more uniform and densely reticulated silane film. A mechanism is proposed to explain the accelerating role of Ce(4+) ions on the cross-linking of the silane layer. (C) 2008 Elsevier Ltd. All rights reserved.

Biogenic modified silica as a sorbent of cadmium ions: Preparation and characterization

This work describes the preparation and characterization of biogenic modified silica from rice hull ash and its use as a sorbent of cadmium ions. Thus, an agro-industrial residue has been used to produce a new adsorbent product which is able to remove toxic elements. Mesoporous biogenic silica was obtained by alkaline extraction of sodium silicate by hydrolysis with the sol-gel process, and it was modified with salen using 1,2-dichloroethane as a spacer. The surface area of the silica was measured by nitrogen adsorption/desorption analysis. Surface modification was measured by Fourier transform infrared spectroscopy. The degree of functionalization was obtained by elemental analysis. This work showed that biogenic modified silica can be produced in aqueous media from rice hull ash using a simple method, providing an alternative method for adsorbent preparation. Thermogravimetric analysis showed that the salen-modified silica is stable up to 209 C. The modified silica displays appropriate structural characteristics for an adsorbent. The cylindrical pores, open at both ends, allow free diffusion of cadmium ions to the adsorption sites on the silica surface. The surface modification increases cadmium adsorption on the silica surface 100-fold. The salen-modified silica showed specific adsorption for Cd2+ of 44.52 mg/g SiO2 at cadmium concentration of 100 mg/l.

Cu and Fe metallic ions-mediated oxidation of low-density lipoproteins studied by NMR, TEM and Z-scan technique

In this work we report on a study of the morphological changes of LDL induced in vitro by metallic ions (Cu(2+) and Fe(3+)). These modifications were characterized by transmission electron microscopy, nuclear magnetic resonance and the Z-scan technique. The degree of oxidative modification of LDL was determined by the TBARS and lipid hydroperoxides assays. It is shown that distinct pathways for modifying lipoproteins lead to different morphological transformations of the particles characterized by changes in size and/or shape of the resulting particles, and by the tendency to induce aggregation of the particles. There were no evidence of melting of particles promoted by oxidative processes with Cu and Fe. (C) 2010 Elsevier Ireland Ltd. All rights reserved.

Nucleophilic addition of potassium organotrifluoroborates to chiral cyclic N-acyliminium ions: stereoselective synthesis of functionalized N-heterocycles

The stereoselective nucleophilic addition of potassium aryl- and alkynyltrifluoroborates to cyclic N-acyliminium ion derivatives from N-benzyl-3,4,5-triacetoxy-2-pyrrolidinone, affording the respective 5-substituted 2-pyrrolidinone is described. The products were obtained in moderate to good yields and with preference for the syn diastereomer. (C) 2008 Elsevier Ltd. All rights reserved.

Synthesis of potassium and tetra n-butylammonium 2-substituted-1,3-dithianotrifluoroborate salts and addition to chiral cyclic N-acyliminium ions

The synthesis of potassium 2-substituted-1,3-dithianotrifluoroborate salts and tetra-n-butyl ammonium derivatives is described. The reaction proceeds under mild reaction conditions and the corresponding products were obtained in moderate to good yields. The reactivity of these compounds in rections with chiral cyclic N-acyliminium ions was evaluated.