A Novel Micro- and Nano-Scale Positioning Sensor Based on Radio Frequency Resonant Cavities

In many micro- and nano-scale technological applications high sensitivity displacement sensors are needed, especially in ultraprecision metrology and manufacturing. In this work a new way of sensing displacement based on radio frequency resonant cavities is presented and experimentally demonstrated using a first laboratory prototype. The principle of operation of the new transducer is summarized and tested. Furthermore, an electronic interface that can be used together with the displacement transducer is designed and proved. It has been experimentally demonstrated that very high and linear sensitivity characteristic curves, in the range of some kHz/nm; are easily obtainable using this kind of transducer when it is combined with a laboratory network analyzer. In order to replace a network analyzer and provide a more affordable, self-contained, compact solution, an electronic interface has been designed, preserving as much as possible the excellent performance of the transducer, and turning it into a true standalone positioning sensor. The results obtained using the transducer together with a first prototype of the electronic interface built with cheap discrete elements show that positioning accuracies in the micrometer range are obtainable using this cost-effective solution. Better accuracies would also be attainable but using more involved and costly electronics interfaces.

Interviewing techniques, genres and contexts

A study of the ways in which the media interview has been described and theorised in academic literature, and in particular the genres of interviewing that this literature has produced. Identifies interviewing techniques used on radio in regional Queensland. Evaluates the ways in which interviewing techniques and practices are mediated by questions of gender and work culture.

A Near-Real-Time Automatic Orbit Determination System for COSMIC and Its Follow-On Satellite Mission: Analysis of Orbit and Clock Errors on Radio Occultation

The COSMIC-2 mission is a follow-on mission of the Constellation Observing System for Meteorology, Ionosphere, and Climate (COSMIC) with an upgraded payload for improved radio occultation (RO) applications. The objective of this paper is to develop a near-real-time (NRT) orbit determination system, called NRT National Chiao Tung University (NCTU) system, to support COSMIC-2 in atmospheric applications and verify the orbit product of COSMIC. The system is capable of automatic determinations of the NRT GPS clocks and LEO orbit and clock. To assess the NRT (NCTU) system, we use eight days of COSMIC data (March 24-31, 2011), which contain a total of 331 GPS observation sessions and 12 393 RO observable files. The parallel scheduling for independent GPS and LEO estimations and automatic time matching improves the computational efficiency by 64% compared to the sequential scheduling. Orbit difference analyses suggest a 10-cm accuracy for the COSMIC orbits from the NRT (NCTU) system, and it is consistent as the NRT University Corporation for Atmospheric Research (URCA) system. The mean velocity accuracy from the NRT orbits of COSMIC is 0.168 mm/s, corresponding to an error of about 0.051 μrad in the bending angle. The rms differences in the NRT COSMIC clock and in GPS clocks between the NRT (NCTU) and the postprocessing products are 3.742 and 1.427 ns. The GPS clocks determined from a partial ground GPS network [from NRT (NCTU)] and a full one [from NRT (UCAR)] result in mean rms frequency stabilities of 6.1E-12 and 2.7E-12, respectively, corresponding to range fluctuations of 5.5 and 2.4 cm and bending angle errors of 3.75 and 1.66 μrad .

A Computational Method based on Radio Frequency Technologies for the Analysis of Accessibility of Disabled People in Sustainable Cities

The sustainability strategy in urban spaces arises from reflecting on how to achieve a more habitable city and is materialized in a series of sustainable transformations aimed at humanizing different environments so that they can be used and enjoyed by everyone without exception and regardless of their ability. Modern communication technologies allow new opportunities to analyze efficiency in the use of urban spaces from several points of view: adequacy of facilities, usability, and social integration capabilities. The research presented in this paper proposes a method to perform an analysis of movement accessibility in sustainable cities based on radio frequency technologies and the ubiquitous computing possibilities of the new Internet of Things paradigm. The proposal can be deployed in both indoor and outdoor environments to check specific locations of a city. Finally, a case study in a controlled context has been simulated to validate the proposal as a pre-deployment step in urban environments.

Handbook on radio frequency interference.

Mode of access: Internet.

Report on radio activities of Iowa colleges and universities : April, 1935

This is a report for the Committee for the Iowa State Planning Board as to the present status of Radio as an aid to education in the state of Iowa.

Radio over fibre enabled sensing and communications system for in building

This paper describes work on radio over fiber distributed antenna systems for improving the quality of radio coverage for in-building applications. The DAS network has also been shown to provide improved detection for Gen 2 UHF RFID tags. Using pre-distortion to reduce the problem of the RFID second harmonic, a simple heterogeneous sensing and communications system is demonstrated. © 2011 NOrthumbria University.

Correlating Multiple 2D Vision Trackers for 3D Object Tracking on Construction Sites

Tracking methods have the potential to retrieve the spatial location of project related entities such as personnel and equipment at construction sites, which can facilitate several construction management tasks. Existing tracking methods are mainly based on Radio Frequency (RF) technologies and thus require manual deployment of tags. On construction sites with numerous entities, tags installation, maintenance and decommissioning become an issue since it increases the cost and time needed to implement these tracking methods. To address these limitations, this paper proposes an alternate 3D tracking method based on vision. It operates by tracking the designated object in 2D video frames and correlating the tracking results from multiple pre-calibrated views using epipolar geometry. The methodology presented in this paper has been implemented and tested on videos taken in controlled experimental conditions. Results are compared with the actual 3D positions to validate its performance.

Contemporary Radio Art and Spatial Politics: The Critical Radio Utopias of Anna Friz

The article explores the work of the Canadian sound artist Anna Friz over the last decade. Her work deals explicitly with issues of technology and the relative absence of women's voices on radio. Exploring her work as a composer, installation artist, instrumentalist, performance artist and storyteller, and contextualising these practices within feminist critiques and radio conventions, the article explores Friz's ‘self-reflexive radio’. Ideas of ‘supermodernity’, ‘displacement’ and ‘critical utopia’ are deployed to discuss specific pieces of Friz's work in relation to identity and space. The article argues that Friz reconfigures the radio as a site of resistance to dominant constructions of contemporary globalised space and cultures, the politics of informational capitalism and the uneven flows that these cultures and politics engender.

Propagation of Microwaves in the Troposphere with Potential Application to GPS based Navigation and Meteorology with emphasis on Indian region

Global Positioning System (GPS), with its high integrity, continuous availability and reliability, revolutionized the navigation system based on radio ranging. With four or more GPS satellites in view, a GPS receiver can find its location anywhere over the globe with accuracy of few meters. High accuracy - within centimeters, or even millimeters is achievable by correcting the GPS signal with external augmentation system. The use of satellite for critical application like navigation has become a reality through the development of these augmentation systems (like W AAS, SDCM, and EGNOS, etc.) with a primary objective of providing essential integrity information needed for navigation service in their respective regions. Apart from these, many countries have initiated developing space-based regional augmentation systems like GAGAN and IRNSS of India, MSAS and QZSS of Japan, COMPASS of China, etc. In future, these regional systems will operate simultaneously and emerge as a Global Navigation Satellite System or GNSS to support a broad range of activities in the global navigation sector.Among different types of error sources in the GPS precise positioning, the propagation delay due to the atmospheric refraction is a limiting factor on the achievable accuracy using this system. The WADGPS, aimed for accurate positioning over a large area though broadcasts different errors involved in GPS ranging including ionosphere and troposphere errors, due to the large temporal and spatial variations in different atmospheric parameters especially in lower atmosphere (troposphere), the use of these broadcasted tropospheric corrections are not sufficiently accurate. This necessitated the estimation of tropospheric error based on realistic values of tropospheric refractivity. Presently available methodologies for the estimation of tropospheric delay are mostly based on the atmospheric data and GPS measurements from the mid-latitude regions, where the atmospheric conditions are significantly different from that over the tropics. No such attempts were made over the tropics. In a practical approach when the measured atmospheric parameters are not available analytical models evolved using data from mid-latitudes for this purpose alone can be used. The major drawback of these existing models is that it neglects the seasonal variation of the atmospheric parameters at stations near the equator. At tropics the model underestimates the delay in quite a few occasions. In this context, the present study is afirst and major step towards the development of models for tropospheric delay over the Indian region which is a prime requisite for future space based navigation program (GAGAN and IRNSS). Apart from the models based on the measured surface parameters, a region specific model which does not require any measured atmospheric parameter as input, but depends on latitude and day of the year was developed for the tropical region with emphasis on Indian sector.Large variability of atmospheric water vapor content in short spatial and/or temporal scales makes its measurement rather involved and expensive. A local network of GPS receivers is an effective tool for water vapor remote sensing over the land. This recently developed technique proves to be an effective tool for measuring PW. The potential of using GPS to estimate water vapor in the atmosphere at all-weather condition and with high temporal resolution is attempted. This will be useful for retrieving columnar water vapor from ground based GPS data. A good network of GPS could be a major source of water vapor information for Numerical Weather Prediction models and could act as surrogate to the data gap in microwave remote sensing for water vapor over land.

Radio 33 comparado con el patrón de oro para diagnóstico de osteoporosis

Introducción: la medición de la densidad mineral ósea en el fémur y columna lumbar es considerada la prueba de oro para el diagnóstico de osteoporosis en mujeres postmenopáusicas, sin tener suficiente evidencia de la utilidad al medir de manera individual o simultanea el radio 33 con este mismo propósito. Metodología Se realizó un estudio de pruebas diagnósticas, valorando concordancia anidada para determinar el valor diagnóstico del radio 33 comparado con los resultados por dual fémur y columna, actualmente patrón de oro el en diagnóstico. Se incluyeron mujeres mayores de 50 años entre el periodo de 2008 y 2011. Resultados Se incluyeron 3241 osteodensitometrias de pacientes femeninas con columna AP, dual fémur, radio ultradistal y radio 33. Tomando como estándar de oro la medición en columna y/o femur, el radio-33 obtuvo una sensibilidad de 95.5% y especificidad de 91% (p= 0,000) para osteoporosis, y una sensibilidad de 76.5% y especificidad de 54.9% p=0,000 para el diagnóstico de osteopenia. El radio 33 permite diagnosticar un 35% adicional de casos que no son captados con la medición en fémur y columna lumbar. Discusión La osteodensitometría en los sitios usados comúnmente, predice únicamente el 40% del riesgo de fractura (1). Si se incluye la medición de radio 33, la sensibilidad de la osteodensitometría sube en un 35.66% adicional, logrando detectar más pacientes con este riesgo y generando un impacto en la oportunidad del tratamiento y quizás reducción en la morbi-mortalidad secundaria a fracturas en esta población susceptible.

Interviewing : a guide for journalists and writers

A practical guide to all aspects of interviewing for print and broadcast journalists and writers. The authors explain how to prepare, and what to do when you don't have time to prepare; outline the difference between "soft" and "hard" interviews; and show how to make the most of any interview.

Television journalism : the cultural politics of contemporary current affairs interviewing

This thesis examined television current affairs interviewing to determine the influence of the cultural politics of Australian commercial and non-commercial networks. Marketplace pressures to rate highly was the major influence on commercial programs resulting in the use of shorter dramatic interviews, more celebrities, fewer politicians, hidden cameras and ambush interviews.