Comparative study of dental arch width in plaster models, photocopies and digitized images

The aim of this study was to comparatively assess dental arch width, in the canine and molar regions, by means of direct measurements from plaster models, photocopies and digitized images of the models. The sample consisted of 130 pairs of plaster models, photocopies and digitized images of the models of white patients (n = 65), both genders, with Class I and Class II Division 1 malocclusions, treated by standard Edgewise mechanics and extraction of the four first premolars. Maxillary and mandibular intercanine and intermolar widths were measured by a calibrated examiner, prior to and after orthodontic treatment, using the three modes of reproduction of the dental arches. Dispersion of the data relative to pre- and posttreatment intra-arch linear measurements (mm) was represented as box plots. The three measuring methods were compared by one-way ANOVA for repeated measurements (α = 0.05). Initial / final mean values varied as follows: 33.94 to 34.29 mm / 34.49 to 34.66 mm (maxillary intercanine width); 26.23 to 26.26 mm / 26.77 to 26.84 mm (mandibular intercanine width); 49.55 to 49.66 mm / 47.28 to 47.45 mm (maxillary intermolar width) and 43.28 to 43.41 mm / 40.29 to 40.46 mm (mandibular intermolar width). There were no statistically significant differences between mean dental arch widths estimated by the three studied methods, prior to and after orthodontic treatment. It may be concluded that photocopies and digitized images of the plaster models provided reliable reproductions of the dental arches for obtaining transversal intra-arch measurements.

Evaluation of transverse changes in the dental arches according to growth pattern: a longitudinal study

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of adenotonsillectomy on hard palate dimensions

Objective: To evaluate hard palate width and height in mouth-breathing children pre- and post-adenotonsillectomy. Methods: We evaluated 44 children in the 3-6 year age bracket, using dental study casts in order to determine palatal height, intercanine width, and intermolar width. The children were divided into two groups: nasal breathing (n = 15) and mouth breathing (n = 29). The children in the latter group underwent adenotonsillectomy. The study casts were obtained prior to adenotonsillectomy, designated time point 1(11), at 13 months after adenotonsillectomy (T2), and at 28 months after adenotonsillectomy (13). Similar periods of observation were obtained for nasal breathing children. Results: At T1, there was a significantly lower intercanine width in mouth breathing children; intermolar width and palate height were similar between groups. After surgery, there was a significant increase in all the analyzed parameters in both groups, probably due to facial growth. Instead, the increase in intercanine width was substantially more prominent in mouth breathing children than in nasal breathing children, and the former difference failed in significance after the procedure. Conclusions: There were no significant differences between the nasal-breathing and mouth-breathing children in terms of intermolar width and palatal height prior to or after tonsillectomy. Although intercanine width was initially narrower in the mouth-breathing children, it showed normalization after the surgical procedure. These results confirm that the restoration of nasal breathing is central to proper occlusal development. (C) 2012 Elsevier Ireland Ltd. All rights reserved.

AVALIAÇÃO POR MEIO DE MODELOS VIRTUAIS TRIDIMENSIONAIS DAS DISTÂNCIAS INTERCANINOS E INTERMOLARES INFERIORES EM TRÊS MOMENTOS

O propósito desse estudo foi de avaliar a estabilidade do tratamento ortodôntico em três momentos distintos, por meio de mensuração das distâncias intercaninos e intermolares inferiores, utilizando, como ferramenta, modelos virtuais tridimensionais. Foram selecionados modelos de gesso da arcada inferior de 19 pacientes em três fases distintas: pré-tratamento (T1), pós-tratamento (T2) e mínimo de 5 anos pós-contenção (T3), totalizando 57 modelos, os quais foram digitalizados por meio do Scanner 3D SCANTEH ST500 (SCAN technology A/S, Dinamarca), para obtenção dos modelos virtuais tridimensionais. Nesses modelos virtuais tridimensionais foram selecionadas e mensuradas as distâncias entre as pontas de cúspide dos caninos, denominada distância intercaninos e pontas de cúspide mesiovestibulares dos primeiros molares, denominada distância intermolares, com o auxílio do programa Rapidform ( Inus Technology Inc,). Para a análise estatística, foi realizada a análise de variância de medidas repetidas, e realizadas comparações múltiplas de Bonferroni ao nível de significância de 5%. As distâncias intercaninos e intermolares, em média, diminuíram entre T1-T2 e continuaram diminuindo entre T2- T3. Após 4 semanas, 20% da amostra foi novamente mensurada para avaliação do erro do método, onde foram encontrados valores médios semelhantes aos encontrados na primeira mensuração. Nesse trabalho, utilizando-se modelos virtuais tridimensionais, nota-se que não há estabilidade durante e após o tratamento ortodôntico, no tocante às distâncias intercaninos e intermolares.

AVALIAÇÃO POR MEIO DE MODELOS VIRTUAIS TRIDIMENSIONAIS DAS DISTÂNCIAS INTERCANINOS E INTERMOLARES INFERIORES EM TRÊS MOMENTOS

O propósito desse estudo foi de avaliar a estabilidade do tratamento ortodôntico em três momentos distintos, por meio de mensuração das distâncias intercaninos e intermolares inferiores, utilizando, como ferramenta, modelos virtuais tridimensionais. Foram selecionados modelos de gesso da arcada inferior de 19 pacientes em três fases distintas: pré-tratamento (T1), pós-tratamento (T2) e mínimo de 5 anos pós-contenção (T3), totalizando 57 modelos, os quais foram digitalizados por meio do Scanner 3D SCANTEH ST500 (SCAN technology A/S, Dinamarca), para obtenção dos modelos virtuais tridimensionais. Nesses modelos virtuais tridimensionais foram selecionadas e mensuradas as distâncias entre as pontas de cúspide dos caninos, denominada distância intercaninos e pontas de cúspide mesiovestibulares dos primeiros molares, denominada distância intermolares, com o auxílio do programa Rapidform ( Inus Technology Inc,). Para a análise estatística, foi realizada a análise de variância de medidas repetidas, e realizadas comparações múltiplas de Bonferroni ao nível de significância de 5%. As distâncias intercaninos e intermolares, em média, diminuíram entre T1-T2 e continuaram diminuindo entre T2- T3. Após 4 semanas, 20% da amostra foi novamente mensurada para avaliação do erro do método, onde foram encontrados valores médios semelhantes aos encontrados na primeira mensuração. Nesse trabalho, utilizando-se modelos virtuais tridimensionais, nota-se que não há estabilidade durante e após o tratamento ortodôntico, no tocante às distâncias intercaninos e intermolares.

AVALIAÇÃO POR MEIO DE MODELOS VIRTUAIS TRIDIMENSIONAIS DAS DISTÂNCIAS INTERCANINOS E INTERMOLARES INFERIORES EM TRÊS MOMENTOS

O propósito desse estudo foi de avaliar a estabilidade do tratamento ortodôntico em três momentos distintos, por meio de mensuração das distâncias intercaninos e intermolares inferiores, utilizando, como ferramenta, modelos virtuais tridimensionais. Foram selecionados modelos de gesso da arcada inferior de 19 pacientes em três fases distintas: pré-tratamento (T1), pós-tratamento (T2) e mínimo de 5 anos pós-contenção (T3), totalizando 57 modelos, os quais foram digitalizados por meio do Scanner 3D SCANTEH ST500 (SCAN technology A/S, Dinamarca), para obtenção dos modelos virtuais tridimensionais. Nesses modelos virtuais tridimensionais foram selecionadas e mensuradas as distâncias entre as pontas de cúspide dos caninos, denominada distância intercaninos e pontas de cúspide mesiovestibulares dos primeiros molares, denominada distância intermolares, com o auxílio do programa Rapidform ( Inus Technology Inc,). Para a análise estatística, foi realizada a análise de variância de medidas repetidas, e realizadas comparações múltiplas de Bonferroni ao nível de significância de 5%. As distâncias intercaninos e intermolares, em média, diminuíram entre T1-T2 e continuaram diminuindo entre T2- T3. Após 4 semanas, 20% da amostra foi novamente mensurada para avaliação do erro do método, onde foram encontrados valores médios semelhantes aos encontrados na primeira mensuração. Nesse trabalho, utilizando-se modelos virtuais tridimensionais, nota-se que não há estabilidade durante e após o tratamento ortodôntico, no tocante às distâncias intercaninos e intermolares.

Dentofacial parameters associated with the unilateral palatally impacted canine

Aims To investigate the relationship between unilateral PIC and specific dentofacial parameters. Materials and methods A sample of 216 subjects, with 108 subjects in the retrospective and prospective samples respectively. Dental parameters: The following dental parameters were assessed: Inter-canine and intermolar width; palatal depth and palatal area; anterior Bolton tooth-size discrepancy (TSD); maxillary arch shape and ratio and maxillary central and lateral incisor shape and ratio. Facial parameters: Three-dimensional (3D) images were taken for subjects in the prospective sample only, and were used to assess the following facial parameters: Face shape; face ratio and 3D distances and angles. Results Dental parameters: Inter-canine width was significantly smaller in the test group compared to the control group in the retrospective (p= 0.0002) and prospective (p= 0.0018) samples respectively. Anterior Bolton TSD was significantly higher in the prospective test group compared to controls (p= 0.0070). Arch ratio was significantly smaller in the test group than the control group for the retrospective sample (p= 0.0029), whereas no significant difference was recorded in the prospective sample (p= 0.1017). Arch shape distribution was significantly different in the retrospective sample (p= 0.009). Tooth shape distribution was significantly different for the maxillary right central incisor in the retrospective sample (p= 0.030). Tooth ratio showed no significant difference for both samples. Facial parameters: Basal width was significantly smaller in the test compared to the control group (p= 0.0001). No significant difference was found in all other 3D distances and angles measured. Conclusion Inter-canine width was significantly smaller in unilateral PIC subjects compared to controls. Anterior Bolton TSD was significantly higher in prospective unilateral PIC compared to controls. Maxillary arch ratio was significantly smaller in retrospective subjects. Square/tapered tooth shape was significantly more common in the retrospective group. Basal width was significantly smaller in subjects with unilateral PIC than controls.

Reproducibility, reliability and validity of measurements obtained from Cecile3 digital models

The aim of this study was to determine the reproducibility, reliability and validity of measurements in digital models compared to plaster models. Fifteen pairs of plaster models were obtained from orthodontic patients with permanent dentition before treatment. These were digitized to be evaluated with the program Cécile3 v2.554.2 beta. Two examiners measured three times the mesiodistal width of all the teeth present, intercanine, interpremolar and intermolar distances, overjet and overbite. The plaster models were measured using a digital vernier. The t-Student test for paired samples and interclass correlation coefficient (ICC) were used for statistical analysis. The ICC of the digital models were 0.84 ± 0.15 (intra-examiner) and 0.80 ± 0.19 (inter-examiner). The average mean difference of the digital models was 0.23 ± 0.14 and 0.24 ± 0.11 for each examiner, respectively. When the two types of measurements were compared, the values obtained from the digital models were lower than those obtained from the plaster models (p < 0.05), although the differences were considered clinically insignificant (differences < 0.1 mm). The Cécile digital models are a clinically acceptable alternative for use in Orthodontics.

Width of exotics from QCD sum rules : Tetraquarks or molecules?

We investigate the widths of the recently observed charmonium like resonances X(3872), Z(4430), and Z(2)(4250) using QCD sum rules. Extending previous analyses regarding these states as diquark-antiquark states or molecules of D mesons, we introduce the Breit-Wigner function in the pole term. We find that introducing the width increases the mass at the small Borel window region. Using the operator-product expansion up to dimension 8, we find that the sum rules based on interpolating current with molecular components give a stable Borel curve from which both the masses and widths of these resonances can be well obtained. Thus the QCD sum rule approach strongly favors the molecular description of these states.

eta ->gamma gamma decay width via the Primakoff cross section

Incoherent eta photoproduction in nuclei is evaluated at forward angles within 4 to 9 GeV using a multiple scattering Monte Carlo cascade calculation with full eta-nucleus final-state interactions. The Primakoff, nuclear coherent and nuclear incoherent components of the cross sections fit remarkably well previous measurements for Be and Cu from Cornell, suggesting a destructive interference between the Coulomb and nuclear coherent amplitudes for Cu. The inelastic background of the data is consistently attributed to the nuclear incoherent part, which is clearly not isotropic as previously considered in Cornell's analysis. The respective Primakoff cross sections from Be and Cu give Gamma(eta ->gamma gamma)=0.476(62) keV, where the quoted error is only statistical. This result is consistent with the Particle Data Group average of 0.510(26) keV and in sharp contrast (similar to 50%) with the value of 0.324(46) keV obtained at Cornell.

New Measurement of the pi(0) Radiative Decay Width

High precision measurements of the differential cross sections for pi(0) photoproduction at forward angles for two nuclei, (12)C and (208)Pb, have been performed for incident photon energies of 4.9-5.5 GeV to extract the pi(0) -> gamma gamma decay width. The experiment was done at Jefferson Lab using the Hall B photon tagger and a high-resolution multichannel calorimeter. The pi(0) -> gamma gamma decay width was extracted by fitting the measured cross sections using recently updated theoretical models for the process. The resulting value for the decay width is Gamma(pi(0) -> gamma gamma) = 7.82 +/- 0.14(stat) +/- 0.17(syst) eV. With the 2.8% total uncertainty, this result is a factor of 2.5 more precise than the current Particle Data Group average of this fundamental quantity, and it is consistent with current theoretical predictions.

Variation of wood density and relationship with the tree-ring width of mahogany trees, Swietenia macrophylla, from Amazonian tropical forest of Peru

Mahogany trees, Swietenia macrophylla, occur in open rainforest, semi deciduous and deciduous and dense rainforest of Peruvian Amazonian tropical forest. They occur, preferentially, in areas with a defined dry season, with typical phenology and seasonal variation activity, forming distinct tree-rings. The present work had as aim to determine the wood density radial variation of 14 mahogany trees, of two populations of the Peruvian Amazonian tropical forest, through the X-ray densitometry and to evaluate their application as methodology, compared to the classic method of measurement table, for the determination of the treering width. The radial wood apparent density of the trees profiles rendered it possible to delimit the areas of juvenile-adult wood and of the heartwood-sapwood, relative to the anatomical structure and chemical composition differences, due to the extractives and the vessels obstruction by tyloses. The mean, minimum and maximum wood apparent density of the mahogany trees for the Populations A and B were of 0.70; 0.29; 1.01 g.cm(-3) and 0.81; 0.29; 1.19 g.cm(-3), respectively. The analysis of the variance and mean test indicate differences of mean wood density among the mahogany trees of each population, probably due to the age of the trees. There was no correlation between mean wood density of mahogany trees among the two populations, as well as, between the tree-ring width and the respective mean density. The X-ray densitometry technique is an important tool in the evaluation of the radial variation of wood apparent density and the delimitation of tree-ring boundaries, with correlations of 0.94 and 0.93 in relation to measurement table, for each sampled population.

Effects of changing blood viscosity and heart rate on vena contracta width as evaluated by color Doppler flow mapping. An in vitro study with a pulsatile flow model

Background: There is only limited knowledge on how the quantification of valvular regurgitation by color Doppler is affected by changing blood viscosity. This study was designed to evaluate the effect of changing blood viscosity on the vena contracta width using an in vitro model of valvular insufficiency capable of providing ample variation in the rate and stroke volume. Methods: We constructed a pulsatile flow model filled with human blood at varying hematocrit (15%, 35%, and 55%) and corresponding blood viscosity (blood/water viscosity: 2.6, 4.8, 9.1) levels in which jets were driven through a known orifice (7 mm(2)) into a 110 mL compliant receiving chamber (compliance: 2.2 mL/mmHg) by a pulsatile pump. In addition, we used variable pump stroke volumes (5, 7.5, and 10 mL) and rates (40, 60, and 80 ppm). Vena contracta region was imaged using a 3.5 MHz transducer. Pressure and volume in the flow model were kept constant during each experimental condition, as well as ultrasound settings. Results: Blood viscosity variation in the experimental range did not induce significant changes in vena contracta dimensions. Also, vena contracta width did not change from normal to low hematocrit and viscosity levels. A very modest increase only in vena contracta dimension was observed at very high level of blood viscosity when hematocrit was set to 55% . Pump rate, in the evaluated range, did not influence vena contracta width. These results in controlled experimental settings suggest that the vena contracta is an accurate quantitative method for quantifying valvular regurgitation even when this condition is associated with anemia, a frequent finding in patients with valvular heart disease.

The influence of erbium:yttrium-aluminum-garnet laser ablation with variable pulse width on morphology and microleakage of composite restorations

The objective of this study was to evaluate the influence of various pulse widths with different energy parameters of erbium:yttrium-aluminum-garnet (Er:YAG) laser (2.94 mu m) on the morphology and microleakage of cavities restored with composite resin. Identically sized class V cavities were prepared on the buccal surfaces of 54 bovine teeth by high-speed drill (n = 6, control, group 1) and prepared by Er:YAG laser (Fidelis 320A, Fotona, Slovenia) with irradiation parameters of 350 mJ/ 4 Hz or 400 mJ/2 Hz and pulse width: group 2, very short pulse (VSP); group 3, short pulse (SP); group 4, long pulse (LP); group 5, very long pulse (VLP). All cavities were filled with composite resin (Z-250-3 M), stored at 37A degrees C in distilled water, polished after 24 h, and thermally stressed (700 cycles/5-55A degrees C). The teeth were impermeabilized, immersed in 50% silver nitrate solution for 8 h, sectioned longitudinally, and exposed to Photoflood light for 10 min to reveal the stain. The leakage was evaluated under stereomicroscope by three different examiners, in a double-blind fashion, and scored (0-3). The results were analyzed by Kruskal-Wallis test (P > 0.05) and showed that there was no significant differences between the groups tested. Under scanning electron microscopy (SEM) the morphology of the cavities prepared by laser showed irregular enamel margins and dentin internal walls, and a more conservative pattern than that of conventional cavities. The different power settings and pulse widths of Er:YAG laser in cavity preparation had no influence on microleakage of composite resin restorations.

A CMOS variable width short-pulse generator circuit for UWB RADAR applications

IEEE International Symposium on Circuits and Systems, pp. 2713 – 2716, Seattle, EUA