Assessment of the impact of the European CO2 emissions trading scheme on the Portuguese chemical industry

This paper describes an assessment of the impact of the enforcement of the European carbon dioxide (CO2) emissions trading scheme on the Portuguese chemical industry, based on cost structure, CO2 emissions, electricity consumption and allocated allowances data from a survey to four Portuguese representative units of the chemical industry sector, and considering scenarios that allow the estimation of increases on both direct and indirect production costs. These estimated cost increases were also compared with similar data from other European Industries, found in the references and with conclusions from simulation studies. Thus, it was possible to ascertain the impact of buying extra CO2 emission permits, which could be considered as limited. It was also found that this impact is somewhat lower than the impacts for other industrial sectors.

Thanatos empresarial, muerte empresarial en el sector industrial, comportamientos y consecuencias

Este trabajo hace parte de los proyectos de investigación que se encuentran dentro del Grupo de Investigación en Perdurabilidad Empresarial y la Línea de Realidad Empresarial, los cuales se enfocan en las relaciones de las organizaciones con los diferentes agentes que las afectan. La presente investigación se desarrolla dentro de un programa concreto llamado Epidemiología empresarial y tiene como propósito identificar el comportamiento del Thanatos empresarial en el sector industrial en Colombia, desde 2007 hasta 2013. Sin embargo, dentro del estudio se nombran algunos resultados encontrados de la liquidación obligatoria previos al año 2007. Inicialmente, el trabajo contiene una recolección de información de diferentes expertos y académicos que se han encargado de estudiar la perdurabilidad de las empresas y los factores que la afectan. Así mismo, en el trabajo se realiza una aproximación teórica al fenómeno de morbilidad empresarial y se lleva a cabo un análisis a partir de cifras reales que permiten identificar el efecto que tiene dicho fenómeno en la economía colombiana y el bienestar de sus habitantes. Así mismo, se desarrolla un concepto general de la situación del sector industrial en Colombia y de su impacto en la economía del país. Por otro lado, se analizan las oportunidades y retos que ofrece el reciente tratado de libre comercio con Estados Unidos y se hace una aproximación a las teorías de internacionalización de Dunning, Johanson, Vahlne y Mattson, y la relación que se establece a partir de ellas. Así mismo, se identifican factores que amenazan la durabilidad de las empresas y la creación de las mismas. Para el desarrollo del estudio se tomaron datos otorgados por la Superintendencia de Sociedades , a partir de los cuales se identificaron las empresas que han venido entrando a procesos de liquidación y reorganización. Teniendo el cuenta que pueden presentarse dos tipos de liquidación en Colombia, la investigación se divide en dos capítulos: liquidación obligatoria y liquidación judicial. En cada uno de estos capítulos se presentan el número de empresas que entraron en liquidación y las ciudades que presentaron más liquidaciones de las empresas en el sector industrial. Finalmente, a partir del análisis la información encontrada, se presenta una serie de recomendaciones a los principales problemas encontrados relacionados con el cierre de las empresas en el País.

TLC Colombia Canadá una apertura a nuevos lazos para el sector agrícola

Este proyecto da una perspectiva inicial del TLC entre Colombia y Canadá en el sector de frutas exóticas, para esto se realizó un exhaustivo pero beneficioso análisis, en el cual se pudo tener una perspectiva desde su entrada en vigencia en el año 2011 hasta la actualidad, todo con el fin de entender el mercado de ambos países y como potencializar las necesidades del mismo. El objetivo es dar a conocer las oportunidades, ventajas, desventajas, amenazas y recomendaciones acerca del TLC entre Colombia-Canadá específicamente en el sector agropecuario, sub-sector agrícola y como entrar a un mercado, el cual llega ofreciendo un producto commodities, para lograr posicionarlo en el mercado Canadiense. Es importante para el proyecto identificar si hay posibilidad para entrar a este mercado y si se tienen nichos los cuales puedan satisfacer las necesidades generadas por las personas, sus comportamientos, cambios culturales y los diferentes procesos de migración que se han tenido durante los últimos años.

Delivering high-level food industry skills for future food security through Advanced Training Partnerships

The UK Biotechnology and Biological Sciences Research Council’s Advanced Training Partnerships initiative represents a significant investment in the provision of high-level skills for the UK food industry sector to address global food security from farm to fork. This paper summarises the background, aims and scope of the Advanced Training Partnerships, their development so far, and offers a view on future directions and evaluation of impact.

Efficient management of available technologies. Aplication to mining operations for industry supplies

Nowadays, processing Industry Sector is going through a series of changes, including right management and reduction of environmental affections. Any productive process which looks for sustainable management is incomplete if Cycle of Life of mineral resources sustainability is not taken into account. Raw materials for manufacturing are provided by mineral resources extraction processes, such as copper, aluminum, iron, gold, silver, silicon, titanium? Those elements are necessary for Mankind development and are obtained from the Earth through mineral extractive processes. Mineral extraction processes are operations which must take care about the environmental consequences. Extraction of huge volumes of rock for their transformation into raw materials for industry must be optimized to reduce ecological cost of the final product as l was possible. Reducing the ecological balance on a global scale has no sense to design an efficient manufacturing in secondary industry (transformation), if in first steps of the supply chain (extraction) impact exceeds the savings of resources in successive phases. Mining operations size suggests that it is an environmental aggressive activity, but precisely because of its great impact must be the first element to be considered. That idea implies that a new concept born: Reduce economical and environmental cost This work aims to make a reflection on the parameters that can be modified to reduce the energy cost of the process without an increasing in operational costs and always ensuring the same production capacity. That means minimize economic and environmental cost at same time. An efficient design of mining operation which has taken into account that idea does not implies an increasing of the operating cost. To get this objective is necessary to think in global operation view to make that all departments involved have common guidelines which make you think in the optimization of global energy costs. Sometimes a single operational cost must be increased to reduce global cost. This work makes a review through different design parameters of surface mining setting some key performance indicators (KPIs) which are estimated from an efficient point of view. Those KPIs can be included by HQE Policies as global indicators. The new concept developed is that a new criteria has to be applied in company policies: improve management, improving OPERATIONAL efficiency. That means, that is better to use current resources properly (machinery, equipment,?) than to replace them with new things but not used correctly. As a conclusion, through an efficient management of current technologies in each extractive operation an important reduction of the energy can be achieved looking at downstream in the process. That implies a lower energetic cost in the whole cycle of life in manufactured product.

A survey of UK selection practices across different organization sizes and industry sectors

This paper presents results of a study examining the methods used to select employees in 579 UK organizations representing a range of different organization sizes and industry sectors. Overall, a smaller proportion of organizations in this sample reported using formalized methods (e.g., assessment centres) than informal methods (e.g., unstructured interviews). The curriculum vitae (CVs) was the most commonly used selection method, followed by the traditional triad of application form, interviews, and references. Findings also indicated that the use of different selection methods was similar in both large organizations and small-to-medium-sized enterprises. Differences were found across industry sector with public and voluntary sectors being more likely to use formalized techniques (e.g., application forms rather than CVs and structured rather than unstructured interviews). The results are discussed in relation to their implications, both in terms of practice and future research.

Chinese export competition, declining exports and adjustments at the industry and regional level in Europe

We analyze how a set of 22 European countries was affected by increased Chinese export competition between 1995 and 2008. Employing product-group level data, we observe a reduction in the export volumes of European countries due to increased Chinese export competition. This deceleration in the export sector induces changes within the manufacturing industries, especially a decline in employment. When using more aggregated, regional-level data, our analysis shows that the industry sector as a whole declines, resulting in an increased unemployment rate. The importance of Chinese export competition for Europe is attributable to its high export intensity.

SUPPLIER INVOLVEMENT IN NEW PRODUCT DEVELOPMENT: A CASE STUDY FROM THE SEMICONDUCTOR INDUSTRY

Global competition requires that the companies adapt themselves to technological changes rapidly, develop new products, reduce the cost, shorten the time to market, and increase the quality. In this context, supplier involvement in New Product Development (NPD) is determinant for a company to respond to the requirements of the increasingly dynamic markets. The main purpose of the paper is to demonstrate the importance of supplier involvement in NPD, buyer-supplier relationships and their effects on buyer’s NPD process, highlighting the benefits of supplier involvement, the barriers, the strategic aspects and industry aspects. These issues are addressed with a case study from the semiconductor industry. Besides helping to understand NPD in the semiconductor industry, the contribution and fi ndings of this work are clear: the results achieved confirm the findings of studies referred in the literature review, and confirm that the semiconductor industry sector requires a closer and more complex relationship structure with suppliers, given the specificities and challenges of the sector, such as rapid technological changes, permanent innovation, global competition, reduction of cost and time-to-market cycle, increased capacity, among other. The main contribution of the paper to the scientific literature and to managers is the better understanding of the buyer-supplier relationships in NPD in the semiconductor industry.

Os custos de desempenho ocultos no dia-a-dia de um restaurante

RESUMO: O desafio era mostrar aquilo que poucos vêem e ninguém mede, mas que pode ajudar a resolver muitos problemas no sector da restauração. Assim, o objectivo é identificar, analisar e mensurar os custos de desempenho ocultos no dia-a-dia de um restaurante. A síntese bibliográfica reflecte a pesquisa efectuada, visando um método que nos ajudasse a medir concretamente os disfuncionamentos que ocorrem nos desempenhos diários dos empregados de mesa de um restaurante. Descobrimos a abordagem socioeconómica de Henri Savall e o seu método de avaliação dos custos de desempenho ocultos. Explicitamos de seguida este método de Savall e apresentamos uma síntese da história do restaurante, com o intuito de mostrar que, desde o seu nascimento, o restaurante é muito mais do que um local onde vamos comer. Feito este caminho, apresentamos o restaurante de luxo que escolhemos e onde aplicámos o método de avaliação dos custos de desempenho ocultos com algumas alterações, pois originalmente este método foi desenvolvido e aplicado ao sector da Indústria. Terminamos com a explicação da forma como aplicámos o método e os respectivos resultados encontrados. Concluímos que a aplicação do método escolhido revela informações preciosas para a gestão e para a tomada de decisão e enfatiza a importância do trabalho efectuado pelos empregados de mesa no seu dia-a-dia. ABSTRACT: Our challenge was to show what few people see and nobody measures, but that can help to solve lots of problems in the restaurants line of business. Our objective is to identify, analyze and measure the performance hidden costs in the daily activity of a restaurant. The bibliography used reflects the researches made, searching for a method which would help us to measure in detail the dysfunctions which occur in the daily performance of the waiters in a restaurant. We discovered the socioeconomic approach of Henri Savall and its evaluation method of the performance hidden costs. Next, we explain Savall’s method and present a synthesis of the restaurant history with the aim to show that, since its birth, the restaurant is much more than the place where people go to eat. This path made, we present the luxury restaurant which was chosen and where we have applied the evaluation method of the performance hidden costs, with some minor changes, because originally this method was developed and applied in the Industry sector. We finalize this work with the explanation of the way how we applied the method and with the presentation of the results. We have concluded that the application of the chosen method of study reveals vital information for the management department and for the decision processes, and that it emphasizes the importance of the waiters in their daily work inside a restaurant.

Gestão do risco em mercados de energia eléctrica recorrendo ao VaR por simulação de Monte Carlo

Mestrado em Engenharia Electrotécnica – Sistemas Eléctricos de Energia.

Analysis of the combined exposure to noise and ototoxic substances—pilot study

Abstract: Ototoxic substances have been associated to damage of the auditory system, and its effects are potentiated by noise exposure. The present study aims at analyzing auditory changes from combined exposure to noise and organic solvents, through a pilot study in the furniture industry sector. Audiological tests were performed on 44 workers, their levels of exposure to toluene, xylene and ethylbenzene were determined and the levels of noise exposure were evaluated. The results showed that workers are generally exposed to high noise levels and cabin priming filler and varnish sector workers have high levels of exposure to toluene. However, no hearing loss was registered among the workers. Workers exposed simultaneously to noise and ototoxic substances do not have a higher degree of hearing loss than those workers exposed only to noise. Thus, the results of this study did not show that the combined exposure to noise and the organic solvent is associated with hearing disorders.

A divulgação sobre instrumentos derivados : evidência empírica do setor da indústria português

Mestrado em Contabilidade

O impacto do ambiente e das energias renováveis no projeto de instalações de frio industrial num matadouro

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecãnica