Labour, industries and the politics of immigration

Cette thèse par articles examine les causes et conséquences économiques des politiques d'immigration du point de vue des pays receveurs. Je soutiens que les politiques d'immigration affectent la composition industrielle, et que l'immigration non-qualifiée a ralenti le développement des secteurs haute-technologie dans les pays de l'OCDE au cours des dernières décennies. Néanmoins, les gouvernements élus ont des incitatifs à accroître les niveaux d'immigration et à admettre des immigrants non-qualifiés, afin de conserver l'appui du secteur privé, et de façon à éviter les réactions négatives qui résulteraient de l'affaiblissement des industries traditionnelles. Le premier article s'appuie sur un modèle de progrès technologique endogène et soutient que les activités de recherche des entreprises croissent avec l'offre relative en travail qualifié, et se contractent avec l'offre relative en travail non-qualifié. À l'aide de données panel sur les pays de l'OCDE entre 1971 et 2003, j'estime l'élasticité des dépenses en R&D par rapport à l'offre relative de facteurs au moyen d'un modèle OLS dynamique (DOLS). Les résultats sont conséquents avec les propositions théoriques, et je démontre que l'immigration non-qualifiée a ralenti l'intensité des investissements privés en R&D. Le deuxième article examine la réponse des gouvernements fédéraux canadiens au lobbying des entreprises sur l'enjeu de l'immigration, à l'aide de données trimestrielles entre 1996 et 2011. J'argue que les gouvernements ont des incitatifs électoraux à accroître les niveaux d'immigration malgré les préférences restrictives du public sur cet enjeu, afin de s'assurer de l'appui des groupes d'intérêt corporatifs. Je teste cet argument à l'aide d'un modèle vectoriel autorégressif. Un résultat clé est la réponse positive des influx de travailleurs temporaires à l'intensité du lobbying des entreprises. Le troisième article soutient que les gouvernements ont des incitatifs à gérer la sélection des immigrants de façon à préserver la composition industrielle régionale. Je teste cet argument avec des données panel sur les provinces canadiennes entre 2001 et 2010, et un devis de recherche basé sur l'approche des doubles moindres carrés (two-stage least squares). Les résultats tendent à appuyer l'argument principal : les provinces dont l'économie repose davantage sur des industries traditionnelles sont susceptibles de recevoir une plus grande proportion d'immigrants non-qualifiés, ce qui contribue à renforcer cette spécialisation.

Industrial Growth in Madhya Pradesh: Structure and Economic Backwardness

It examine the aspects of Madhya Pradesh’s industrial structure which throw light on the development, viability and the efficiency of not only the over all industrial sector but also some of the selected industries of the state. The major objectives of are to examine the nature and characteristics of economic backwardness in Madhya Pradesh in an inter-state comparative framework and to analyse the pace and pattern of industrial growth in Madhya Pradesh against the backdrop of liberalization. To explore the industrial structure of Madhya Pradesh using the major structural ratios and industry mix. This study has underlined some structural as well as region specific constraints to the accelerated growth of the manufacturing industry in Madhya Pradesh. The industrial structure of Madhya Pradesh is concentrated and lop-sided. This is evidenced by the dominancy of single industry, basic metal and alloys. A diversified industrial structure is essential for promoting interdependent growth of the manufacturing industry based on the inter-industry linkages and agglomeration. The thesis gives a broad spectrum of regional disparities in development and evidence for Madhya Pradesh’s backwardness also portrayed and reflects the changing industrial structure of the state.

Input usage, output mix and industry deregulation: an analysis of the Australian dairy manufacturing industry

In this paper we estimate a Translog output distance function for a balanced panel of state level data for the Australian dairy processing sector. We estimate a fixed effects specification employing Bayesian methods, with and without the imposition of monotonicity and curvature restrictions. Our results indicate that Tasmania and Victoria are the most technically efficient states with New South Wales being the least efficient. The imposition of theoretical restrictions marginally affects the results especially with respect to estimates of technical change and industry deregulation. Importantly, our bias estimates show changes in both input use and output mix that result from deregulation. Specifically, we find that deregulation has positively biased the production of butter, cheese and powders.

Input usage, output mix and industry deregulation: an analysis of the Australian dairy manufacturing industry

In this paper we estimate a Translog output distance function for a balanced panel of state level data for the Australian dairy processing sector. We estimate a fixed effects specification employing Bayesian methods, with and without the imposition of monotonicity and curvature restrictions. Our results indicate that Tasmania and Victoria are the most technically efficient states with New South Wales being the least efficient. The imposition of theoretical restrictions marginally affects the results especially with respect to estimates of technical change and industry deregulation. Importantly, our bias estimates show changes in both input use and output mix that result from deregulation. Specifically, we find that deregulation has positively biased the production of butter, cheese and powders.

Working time alterations within the Australian construction industry

Purpose: The purpose of this paper is to provide a labour process theory interpretation of four case studies within the Australian construction industry. In each case study a working time intervention (a shift to a five-day working week from the industry standard six days) was implemented as an attempt to improve the work-life balance of employees. ----- ----- Design/methodology/approach: This paper was based on four case studies with mixed methods. Each case study has a variety of data collection methods which include questionnaires, short and long interviews, and focus groups. ----- ----- Findings: It was found that the complex mix of wage- and salary-earning staff within the construction industry, along with labour market pressures, means that changing to a five-day working week is quite a radical notion within the industry. However, there are some organisations willing to explore opportunities for change with mixed experiences. ----- ----- Practical implications: The practical implications of this research include understanding the complexity within the Australian construction industry, based around hours of work and pay systems. Decision-makers within the construction industry must recognize a range of competing pressures that mean that “preferred” managerial styles might not be appropriate. ----- ----- Originality/value:– This paper shows that construction firms must take an active approach to reducing the culture of long working hours. This can only be achieved by addressing issues of project timelines and budgets and assuring that take-home pay is not reliant on long hours of overtime.

Complicated working time arrangements : construction industry case study

This paper extends the understanding of working-time changes and work-life balance (WLB) through analyzing a case study where a reduction in working hours designed to assist the workforce in balancing work and nonwork life was implemented. An alliance project in the Australian construction industry was established initially with a 5-day working week, a departure from the industry-standard 6-day week. However, a range of factors complicated the success of this initiative, and the industry-standard 6-day working week was reinstated for the project. The authors argue that this case is valuable in determining the complex mix of influences that work against a wholesale or straightforward adoption of working-time adjustments and work-life balance practices. It is concluded that although the prevailing workplace culture is considered an important factor in the determination of working time, structural and workplace principles and practices may also be critical in working to secure the successful introduction of working-time reduction and work-life balance initiatives in the construction industry in the future.

Strength properties of composite clay balls containing additives from industry wastes as new filter media in water treatment

Pebble matrix filtration (PMF) is a water treatment technology that can remove suspended solids in highly turbid surface water during heavy storms. PMF typically uses sand and natural pebbles as filter media. Hand-made clay pebbles (balls) can be used as alternatives to natural pebbles in PMF treatment plants, where natural pebbles are not readily available. Since the high turbidity is a seasonal problem that occurs during heavy rains, the use of newly developed composite clay balls instead of pure clay balls have the advantage of removing other pollutants such as natural organic matter (NOM) during other times. Only the strength properties of composite clay balls are described here as the pollutant removal is beyond the scope of this paper. These new composite clay balls must be able to withstand dead and live loads under dry and saturated conditions in a filter assembly. Absence of a standard ball preparation process and expected strength properties of composite clay balls were the main reasons behind the present study. Five different raw materials from industry wastes: Red Mud (RM), Water Treatment Alum Sludge (S), Shredded Paper (SP), Saw Dust (SD), and Sugar Mulch (SM) were added to common clay brick mix (BM) in different proportions. In an effort to minimize costs, in this study clay balls were fired to 1100 0C at a local brick factory together with their bricks. A comprehensive experimental program was performed to evaluate crushing strength of composite hand-made clay balls, using uniaxial compression test to establish the best material combination on the basis of strength properties for designing sustainable filter media for water treatment plants. Performance at both construction and operating stages were considered by analyzing both strength properties under fully dry conditions and strength degradation after saturation in a water bath. The BM-75% as the main component produced optimum combination in terms of workability and strength. With the material combination of BM-75% and additives-25%, the use of Red Mud and water treatment sludge as additives produced the highest and lowest strength of composite clay balls, with a failure load of 5.4 kN and 1.4 kN respectively. However, this lower value of 1.4 kN is much higher than the effective load on each clay ball of 0.04 kN in a typical filter assembly (safety factor of 35), therefore, can still be used as a suitable filter material for enhanced pollutant removal.

Optimal advertisement-innovation mix for maximizing the discounted flow of profit

Due to boom in telecommunications market, there is hectic competition among the cellular handset manufacturers. As cellular manufacturing industry operates in an oligopoly framework, often price-rigidity leads to non-price wars. The handset manufacturing firms indulge in product innovation and also advertise their products in order to achieve their objective of maximizing discounted flow of profit. It is of interest to see what would be the optimal advertisement-innovation mix that would maximize the discounted How of profit for the firms. We used differential game theory to solve this problem. We adopted the open-loop solution methodology. We experimented for various scenarios over a 30 period horizon and derived interesting managerial insights.

Soil mix technology for integrated remediation and ground improvement: From laboratory work to field trials

Relatively new in the UK, soil mix technology applied to the in-situ remediation of contaminated land involves the use of mixing tools and additives to construct permeable reactive in-ground barriers and low-permeability containment walls and for hot-spot soil treatment by stabilisation/ solidification. It is a cost effective and versatile approach with numerous environmental advantages. Further commercial advantages can be realised by combining this with ground improvement through the development of a single integrated soil mix technology system which is the core objective of Project SMiRT (Soil Mix Remediation Technology). This is a large UK-based R&D project involving academia-industry collaboration with a number of tasks including equipment development, laboratory treatability studies, field trials, stakeholder consultation and dissemination activities. This paper presents aspects of project SMiRT relating to the laboratory treatability study work leading to the design of the field trials. © 2012 American Society of Civil Engineers.

Sustainable waste recycling solution for the glass fibre reinforced polymer composite materials industry

In this paper the adequacy and the benefit of incorporating glass fibre reinforced polymer (GFRP) waste materials into polyester based mortars, as sand aggregates and filler replacements, are assessed. Different weight contents of mechanically recycled GFRP wastes with two particle size grades are included in the formulation of new materials. In all formulations, a polyester resin matrix was modified with a silane coupling agent in order to improve binder-aggregates interfaces. The added value of the recycling solution was assessed by means of both flexural and compressive strengths of GFRP admixed mortars with regard to those of the unmodified polymer mortars. Planning of experiments and data treatment were performed by means of full factorial design and through appropriate statistical tools based on analyses of variance (ANOVA). Results show that the partial replacement of sand aggregates by either type of GFRP recyclates improves the mechanical performance of resultant polymer mortars. In the case of trial formulations modified with the coarser waste mix, the best results are achieved with 8% waste weight content, while for fine waste based polymer mortars, 4% in weight of waste content leads to the higher increases on mechanical strengths. This study clearly identifies a promising waste management solution for GFRP waste materials by developing a cost-effective end-use application for the recyclates, thus contributing to a more sustainable fibre-reinforced polymer composites industry.

Tenant mix variety in regional shopping centres: some UK empirical analyses

The variety and quality of the tenant mix within a shopping centre is a key concern in shopping centre management. Tenant mix determines the extent of externalities between outlets in the centre, helps establish the image of the centre and, as a result, determines the attractiveness of the centre for consumers. This then translates into sales and rents. However, the management of tenant mix has largely been based on perceived “optimum” arrangements and industry rules of thumb. This paper attempts to model the impact of tenant mix on the rent paid by retailers in larger UK shopping centres and, hence, the returns made by shopping centre landlords. It extends work on shopping centre rent determination (see Working Paper 10/03) utilising a database of 148 regional shopping centres in the UK, with detailed data for over 1900 tenants. Econometric models test the relationship between rental levels and the levels of retail concentration and diversity, while controlling for a range of continuous and qualitative characteristics of each tenant, each retail product, and each shopping centre. Factor analysis is then used to extract the core retail and service categories from the tenant lists of the 148 shopping centres. The factor scores from these core retailer factors are then tested against rent payable. The results from the empirical analysis allow us to generate some clear analytical and empirical implications for optimal retail management.

Anticipating the uptake and possible implication of digital imaging within the construction industry

Photography within the construction industry is merging into a new form of image capture and output that is a mix of conventional photography and digital imagery. As this transition takes place it is anticipated that the credibility of the image may also change within in the communication chain that links the various disciplines within the building industry. The following paper presents the development and results of a pilot survey of building professionals, which addresses the quality, content and authenticity of both conventional photography and digitally produced images used within the construction industry.

Effects of fish oil substitution with a mix blend vegetable oil on nutrient digestibility in Murray cod, Maccullochella peelii peelii

The replacement of fish oil with vegetable based oils is a strategy which is increasingly being adopted by the aquafeed industry as an essential component to reduce the reliance on a limited supply of a natural resource, which in turn also provides cost benefits. The aim of the present investigation was to evaluate the lipid and fatty acid digestibility of a mix blend vegetable oil in juvenile Murray cod; an emerging species of increasing interest in the Australian aquaculture sector. Five semi purified experimental diets were formulated with 17% lipid originating from fish oil (FO) which was substituted in 25% increments by blended vegetable oil (VO), formulated using olive oil (12%), palm oil (43%) and linseed oil (45%) to match the major fatty acid classes of the FO.

Significant differences between the dietary treatments with regard to the lipid and individual fatty acid digestibility were recorded. This study clearly demonstrated that in Murray cod fatty acid digestibility decreases with chain length, and inversely increases relative to the degree of unsaturation. The combination of chain length, degree of unsaturation and the melting point of individual fatty acids resulted in the digestibility of PUFA > MUFA > SFA and short chain > longer chain fatty acids. Therefore, the inclusion of a mixed blend vegetable oil resulted in significantly reduced lipid digestibility in juvenile Murray cod.

Mineralogical characterization of clays used in the structural ceramic industry in west of S. Paulo State, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)