Caractéristiques des structures turbulentes de l'écoulement et du transport en charge de fond en rivière à lit de graviers lors de la montée d'une crue

En rivière à lit de graviers, le transport des sédiments en charge de fond est un processus intermittent qui dépend de plusieurs variables du système fluvial dont la prédiction est encore aujourd’hui inexacte. Les modèles disponibles pour prédire le transport par charriage utilisent des variables d’écoulement moyen et la turbulence n’est généralement pas considérée malgré que les tourbillons contenus dans les écoulements possèdent une quantité d’énergie importante. L’utilisation de nouvelles approches pour étudier la problématique du transport par charriage pourrait nous permettre d’améliorer notre connaissance de ce processus déterminant en rivière alluviale. Dans ce mémoire, nous documentons ces composantes de la dynamique fluviale dans un cours d’eau graveleux en période de crue. Les objectifs du projet de recherche sont : 1) d’examiner l’effet du débit sur les variables turbulentes et les caractéristiques des structures turbulentes cohérentes, 2) d’investiguer l’effet du débit sur les caractéristiques des événements de transport de sédiments individuels détectés à l’aide d’un nouvel algorithme développé et testé et 3) de relier les caractéristiques de l’écoulement turbulent aux événements de transport de sédiments individuels. Les données de turbulence montrent qu’à haut niveau d’eau, l’écoulement décéléré est peu cohérent et a une turbulence plus isotrope où les structures turbulentes cohérentes sont de courte durée. Ces observations se distinguent de celles faites à faible niveau d’eau, en écoulement accéléré, où la plus grande cohérence de l’écoulement correspond à ce qui est généralement observé dans les écoulements uniformes en rivières graveleuses. Les distributions de fréquence des variables associées aux événements de transport individuel (intensité de transport moyenne, durée d’événement et intervalle entre événements successifs) ont des formes différentes pour chaque intensité de crue. À haut niveau d’eau, le transport est moins intermittent qu’à faible débit où les événements rares caractérisent davantage les distributions. L’accélération de l’écoulement à petite échelle de temps joue un rôle positif sur le transport, mais surtout lorsque la magnitude de la crue mobilisatrice est en dessous du niveau plein bord. Les résultats de l’étude montrent que les caractéristiques de la turbulence ainsi que les liens complexes entre l’écoulement et le transport par charriage sont fonction du débit.

Analyses of the temporal variation of coarse bedload transport and its grain size distribution : Squaw Creek, Montana, USA /

"December 1996."

Reconsidérer les interactions entre l’écoulement, le transport de sédiments en charge de fond et la morphologie en rivière à lit de graviers : approches, échelles et analyses

L'objectif ultime en géomorphologie fluviale est d'expliquer les formes des cours d'eau et leur évolution temporelle et spatiale. La multiplication des études nous a mené à la réalisation que les systèmes géomorphologiques sont complexes. Les formes observées sont plus que la somme des processus individuels qui les régissent en raison d’interactions et de rétroactions non-linéaires à de multiples échelles spatiales et temporelles. Dans ce contexte, le but général de la thèse est de proposer et de tester de nouvelles avenues de recherche afin de mieux appréhender la complexité des dynamiques fluviales en utilisant des approches méthodologiques et analytiques mettant l’accent sur les interactions entre l’écoulement, le transport de sédiments en charge fond et la morphologie du lit en rivière graveleuse. Cette orientation découle du constat que les paradigmes actuels en géomorphologie fluviale n’arrivent pas à expliquer adéquatement la variabilité naturelle du transport en charge de fond ainsi que des formes du lit qui en résultent. Cinq pistes de réflexion sont développées sous forme d’articles basés sur des études de cas : 1. L'intégration des échelles de variation de l'écoulement permet d’insérer la notion de structures turbulentes dans des pulsations de plus grande échelle et d'améliorer la compréhension de la variabilité du transport de sédiments. 2. La quantification des taux de changement de l’écoulement (accélération /décélération) au cours d’une crue permet d’expliquer la variabilité des flux de transport en charge fond autant que la magnitude de l’écoulement. 3. L’utilisation de techniques de mesures complémentaires révèle une nouvelle dynamique du lit des rivières graveleuses, la dilatation et la contraction du lit suite à une crue. 4. La remise en cause du fait généralement accepté que le transport en charge de fond est corrélé positivement à l'intensité des modifications morphologiques en raison d’un problème associé aux échelles différentes des processus en cause. 5. L’approche systémique des dynamiques fluviales par l’utilisation d’analyses multivariées permet d’appréhender la complexité des dynamiques de rétroactions linéaires et non-linéaires dans l’évolution d’un chenal et d’illustrer l’importance de l’historique récent des changements géomorphologiques en réponse aux crues. Cette thèse se veut une avancée conceptuelle issue d'une profonde réflexion sur les approches classiques que l'on utilise en géomorphologie fluviale depuis plusieurs décennies. Elle est basée sur un jeu de données unique récolté lors du suivi intensif de 21 évènements de crue dans un petit cours d’eau à lit de graviers, le ruisseau Béard (Québec). Le protocole expérimental axé sur la simultanéité des mesures de l’écoulement, de la morphologie du lit et du transport de sédiments en charge de fond a permis de centrer la recherche directement sur les interactions entre les processus plutôt que sur les processus individuels, une approche rarement utilisée en géomorphologie fluviale. Chacun des chapitres illustre un nouveau concept ou une nouvelle approche permettant de résoudre certaines des impasses rencontrées actuellement en géomorphologie fluviale. Ces travaux ont des implications importantes pour la compréhension de la dynamique des lits de rivières et des habitats fluviaux et servent de point de départ pour de nouveaux développements.

Respiration rates and electron transport system activities of copepod species obtained during Maria S. Merian cruise MSM17/3

Respiration rates and electron transport system (ETS) activities were measured in dominant copepod species from the northern Benguela upwelling system in January-February 2011 to assess the accuracy of the ETS assay in predicting in vivo respiration rates. Individual respiration rates varied from 0.06 to 1.60 µL O2/h/ind, while ETS activities converted to oxygen consumption ranged from 0.14 to 4.46 µL O2/h/ind. ETS activities were significantly correlated with respiration rates (r**2 = 0.79, p = 0.0001). R:ETS ratios were lowest in slow-moving Eucalanidae (0.11) and highest in diapausing Calanoides carinatus copepodids CV (0.76) while fast-moving copepods showed intermediate R:ETS (0.23-0.37). 82% of the variance of respiration rates could be explained by differences in dry mass, temperature and the activity level of different copepod species. Three regression equations were derived to calculate respiration rates for diapausing, slow- and fast-moving copepods, respectively, based on parameters such as body mass and temperature. Thus, knowledge about the activity level and behavioral characteristics of copepod species can significantly increase the predictive accuracy of metabolic models, which will help to better understand and quantify the impact of copepods on nutrient and carbon fluxes in marine ecosystems.

Brain-Based Individual Difference Measures of Reading Skill in Deaf and Hearing Adults

Thesis (Ph.D.)--University of Washington, 2015

Penetration velocity and deceleration of penetrometer stations N1 to N97 during cruise Senckenberg_11_2008

In-situ geotechnical measurements of surface sediments were carried out along large subaqueous dunes in the Knudedyb tidal inlet channel in the Danish Wadden Sea using a small free-falling penetrometer. Vertical profiles showed a typical stratification pattern with a resolution of ~1 cm depicting a thin surface layer of low sediment strength and a stiffer substratum below (quasi-static bearing capacity equivalent: 1-3 kPa in the top layer, 20-140 kPa in the underlying sediment; thickness of the top layer ca. 5-8 cm). Observed variations in the thickness and strength of the surface layer during a tidal cycle were compared to mean current velocities (measured using an acoustic Doppler current profiler, ADCP), high-resolution bathymetry (based on multibeam echo sounding, MBES) and qualitative estimates of suspended sediment distributions in the water column (estimated from ADCP backscatter intensity). The results revealed an ebb dominance in sediment remobilization, and a general accretion of the bed towards low water. A loose top layer occurred throughout the tidal cycle, likely influenced by bedload transport and small events of suspended sediment resettlement (thickness: 6 +-2 cm). Furthermore, this layer showed a significant increase in thickness (e.g. from 8 cm to 16 cm) related to periods of overall deposition. These findings imply that dynamic penetrometers can conveniently serve to (1) quantify potentially mobile sediments by determining the thickness of a loose sediment surface layer, (2) unravel sediment strength development in potentially mobile sediments and (3) identify sediment accumulation. Such data are an important complement and add a new geotechnical perspective during investigations of sediment remobilization processes in highly dynamic coastal environments.

Physiological and biochemical characteristics of Calanoides carinatus in waters off the coast of Namibia

Biochemical composition, feeding and oxygen uptake rate of mass planktic copepod Calanoides carinatus were studied off the coast of Namibia in January 1986. Population of this species in the area had two parts: the surface group inhabiting the 0-100 m layer and the deep part inhabiting depths greater than 200 m. Individuals in the surface and deep parts of the population differed in food content of guts, lipid content of bodies, oxygen uptake rate and behavior. Differences in biochemical composition and rate of physiological processes indicate that individuals in the deep part of the population are in diapause. Nature of changes in biochemical composition of C. carinatus in surface and deep waters in relation to life cycle characteristics in upwelling waters are discussed.

Urban transport interchanges: Importance-Performance analysis for evaluating perceived quality

As the world becomes more urbanised, public transport in cities must seek to provide viable alternatives to individual car transport. At an urban level, interchanges in public transport networks provide easy transfers between and within different transport modes and facilitate seamless travel. This study proposes a methodological framework with which to identify the factors that travellers view as key elements of an urban transport interchange. An attitudinal survey was undertaken in order to collect information about users? needs and perceptions in the Moncloa interchange in Madrid, Spain. The results obtained from an Importance-Performance Analysis (IPA) show that aspects related to the signposting of different facilities and transport services, the internal design of the interchange and the surrounding area, and safety and security are the greatest strengths of the interchange.

Herpesviruses use bidirectional fast-axonal transport to spread in sensory neurons

Alpha herpesviruses infect the vertebrate nervous system resulting in either mild recurrent lesions in mucosal epithelia or fatal encephalitis. Movement of virions within the nervous system is a critical factor in the outcome of infection; however, the dynamics of individual virion transport have never been assessed. Here we visualized and tracked individual viral capsids as they moved in axons away from infected neuronal cell bodies in culture. The observed movement was compatible with fast axonal flow mediated by multiple microtubule motors. Capsids accumulated at axon terminals, suggesting that spread from infected neurons required cell contact.

Transportation disadvantage determination framework : space-time organisation measure in determining transportation disadvantage

Transportation disadvantage has been recognised to be the key source of social exclusion. Therefore an appropriate process is required to investigate and seek to resolve this problem. Currently, determination of Transportation Disadvantage is postulate based on income, poverty and mobility level. Transportation disadvantage may best regard be based on accessibility perspectives as they represent inability of the individual to access desired activities. This paper attempts to justify a process in determining transportation disadvantage by incorporating accessibility and social transporation conflict as the essence of a framework. The framework embeds space time organisation within the dimension of accessibility to identify a rigorous definition of transportation disadvantage. In developing the framework, the definition, dimension, component and measure of accessibility were scrutinised. The findings suggest the definition and dimension are the significant approach of research to evaluate travel experience of the disadvantaged. Concurrently, location accessibility measures will be incorprated to strenghten the determination of accessibility level. Literature review in social exclusion and mobility-related exclusion identified the dimension and source of transportation disadvantage. It was revealed that the appropriate approach to justify trasnportation disadvantaged is to incorporate space-time organisation within the studied components. The suggested framework is an inter-related process consisting of component of accessibility; individual, networking (transport system) and activities (destination). The integration and correlation among the components shall determine the level of transportation disadvantage. Prior findings are used to retrieve the spatial distribution of transportation disadvantaged and appropriate policies are developed to resolve the problems.

A framework for optimising capital investment and operations in livestock logistics

Despite the longevity, scale and importance of northern Australia's beef industry, recent disruptions to external markets have demonstrated a degree of vulnerability to shocks in the supply chain. Matching the industry's long-evident resilience to climatic variability with resilience to changes in markets and supply chains requires careful planning. One component of this is how investments in infrastructure will need to be planned to facilitate adaptive responses to market changes. This paper provides an outline of a modelling framework that links strategic and operational dynamic models of logistics along the supply chain from the property to the abattoir or port. A novelty of the methodology is that it takes into account the high granularity of individual livestock transport vehicle movements and the ability to scale up to an almost complete view of logistics costs across the entire beef industry of northern Australia. The paper illustrates how the methodology could be used to examine the effects of changes in logistics infrastructure on efficiency and costs using examples from the states of Northern Territory, Western Australia and Queensland.

A fundamental approach to phase noise reduction in hybrid Si/III-V lasers

Spontaneous emission into the lasing mode fundamentally limits laser linewidths. Reducing cavity losses provides two benefits to linewidth: (1) fewer excited carriers are needed to reach threshold, resulting in less phase-corrupting spontaneous emission into the laser mode, and (2) more photons are stored in the laser cavity, such that each individual spontaneous emission event disturbs the phase of the field less. Strong optical absorption in III-V materials causes high losses, preventing currently-available semiconductor lasers from achieving ultra-narrow linewidths. This absorption is a natural consequence of the compromise between efficient electrical and efficient optical performance in a semiconductor laser. Some of the III-V layers must be heavily doped in order to funnel excited carriers into the active region, which has the side effect of making the material strongly absorbing.

This thesis presents a new technique, called modal engineering, to remove modal energy from the lossy region and store it in an adjacent low-loss material, thereby reducing overall optical absorption. A quantum mechanical analysis of modal engineering shows that modal gain and spontaneous emission rate into the laser mode are both proportional to the normalized intensity of that mode at the active region. If optical absorption near the active region dominates the total losses of the laser cavity, shifting modal energy from the lossy region to the low-loss region will reduce modal gain, total loss, and the spontaneous emission rate into the mode by the same factor, so that linewidth decreases while the threshold inversion remains constant. The total spontaneous emission rate into all other modes is unchanged.

Modal engineering is demonstrated using the Si/III-V platform, in which light is generated in the III-V material and stored in the low-loss silicon material. The silicon is patterned as a high-Q resonator to minimize all sources of loss. Fabricated lasers employing modal engineering to concentrate light in silicon demonstrate linewidths at least 5 times smaller than lasers without modal engineering at the same pump level above threshold, while maintaining the same thresholds.