962 resultados para Implante de Prótese


Relevância:

100.00% 100.00%

Publicador:

Resumo:

The combination of several methods for solving aesthetics in a clinical case can be a complicating factor. The diagnosis and planning of the event held in conjunction with the dental technician expand the possibilities of success. The present case illustrates the aesthetic resolution through the association of implant- and tooth-supported prostheses using metal free ceramic systems. A 38-year old male patient presented with a complex smile. After diagnosis and treatment planning, two ceramic crowns were made, one on tooth 11 and one on the implant region 21, along with a laminated porcelain veneer on the region of 12. Aesthetic needs of the patient are predictable only with a sound diagnosis.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Removable partial denture improve functional and aesthetic failures caused by partial loss of teeth, however specific characteristics of each patients can determine the success of treatment, especially with regard to the support of the prosthesis, which may depend on teeth, the combination of teehe and mucosa and currently associated with the dental implants. The aim of this study is report a case in which there was the need of the association, to enable better aesthetics and self-esteem to the patients. After implant placement and fabrication of prosthetic patient reported satisfaction with the rehabilitation treatment, improving their quality of life.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

The aim of this study was to compare the misfit vertical, horizontal and passivity of zirconia and cobalt-chromium frameworks fabricated for CAD / CAM technology and conventional method of casting. Sixteen frameworks in one-piece, were obtained from a metallic matrix containing three Brånemark compatible implants with regular platform (Titamax Cortical Ti, Neodent). Eight frameworks were fabricated by CAD / CAM system (NeoShape, Neodent): four in zirconia (ZirCAD) and four cobalt-chromium (CoCrcad). Eight other frameworks were obtained by conventional casting method: four cobalt-chromium with UCLA abutment premachined Co-Cr (CoCrUCci) and four cobalt-chromium with UCLA abutment castable (CoCrUCc). The fit vertical, horizontal and passivity by one-screw test were measured using scanning electron microscopy with magnification of 250x. Initially evaluated the passivity by one-screw test and subsequently to assess the vertical and horizontal misfit, tightened all the screws with a torque of 20 Ncm. Mean, standard deviation, minimum and maximum values were calculated for each group. Measurements of horizontal misfit were transformed into cumulative frequency for categorization of the variable and the group later comparison groups. To evaluate the existence of quantitative differences between the groups tested for vertical misfit and passivity, we used the Kruskal-Wallis test. The Mann-Whitney test was used to compare group to group statistical differences (p <0.05). Were observed the respective mean and standard deviation for vertical misfit and passivity in micrometers: ZirCAD (5.9 ± 3.6, 107.2 ± 36), CoCrcad (1.2 ± 2.2, 107.5 ± 26 ), CoCrUCci (11.8 ± 9.8, 124.7 ± 74), CoCrUCc (12.9 ± 11.0, 108.8 ± 85). There were statistical differences in measures of vertical misfit (p = 0.000). The Mann-Whitney test revealed statistical differences (p <0.05) between all groups except between CoCrUCci and CoCrUCc (p = 0.619). No statistical difference was observed for the passivity. In relation to the horizontal misfit groups ZirCAD and CoCrcad did not show best values in relation to CoCrUCci and CoCrUCc. Based on the results it can be concluded that frameworks fabricated by CAD / CAM technology had better values of vertical fit than those manufactured by the casting method, nevertheless, the passivity was not influenced by manufacturing technique and material used. The horizontal fit obtained by frameworks manufactured by CAD / CAM was not superior to those manufactured by casting. A lower variability in vertical adjustment and passivity was observed when frameworks were fabricated by CAD / CAM technology

Relevância:

70.00% 70.00%

Publicador:

Resumo:

Veia cava inferior dupla é uma variação anatômica rara cuja prevalência é de 0,2-3%. O implante de filtro de veia cava, quando indicado em casos com duplicidade da veia cava inferior, pode ser realizado de diferentes formas: em ambas as veias cavas; em uma delas, embolizando a anastomose entre ambas; em somente uma delas; ou por implante supra-renal. Relatamos um caso de trombose venosa profunda no pós-operatório de implante de prótese de quadril com contra-indicação para tratamento anticoagulante e cuja cavografia evidenciou duplicidade de veia cava inferior. O implante de filtro de veia cava inferior realizado em posição supra-renal mostrou-se opção adequada e segura.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

Periodontitis is a chronic inflammatory disease that results in the destruction of teeth and their supporting tissues with subsequent tooth loss. The replacement of missing teeth for implant-supported restorations has proven to be a highly predictable treatment method with good long-term prognosis. However, some consequences of tooth loss prevents dental implant placement in an ideal position, where regenerative procedures are necessary for this type of rehabilitation. Less invasive procedures such as conventional prosthesis emerge as a therapeutic option in cases where there is enough bone structure for implants and patient´s non-acceptance for invasive procedures. Thus, this paper aims to present the resolution of rehabilitation through a noninvasive and multidisciplinary treatment. One female patient referred to the clinic presented maladaptive bilateral mandibular fixed prostheses, endodontic lesions, gingival recession, and root sensitivity. For proper resolution of this case, an association among osseointegrated implants, fixed partial prosthesis, tooth extraction, and aesthetic periodontal procedures with the use of subepithelial connective tissue graft was proposed. After two years, the patient shows excellent aesthetics and chewing. Within the limits of this scenario, this paper discusses the various factors that may affect the choice of a particular treatment modality for the rehabilitation of edentulous single spaces.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

The modalities of treatment with prostheses over implants for total edentulous patients can be divided in fixed and removable prostheses (overdentures). The fixed prostheses modality has proven to offer better results as to the functional aspects and, results in higher longevity. Overdentures are considered as a modality of rehabilitation utilized to compensate the need for better retention, aside from augmenting chewing efficiency. Its use is justified by its facilitated hygiene, reduced surgical and prosthetic costs, reestablishment of labial support and elimination of the possibility of air escape. However, this option presents psychosocial downside, since the fact that it is considered a removable rehabilitation modality does not please the majority of patients. Although many patients prefer a fixed implant-supported prosthesis to a removable overdenture, frequently it is necessary to utilize an implant retained overdenture as an alternative to the treatment, due to anatomical, physiological, aesthetic, hygienic, and financial limitations regarding the patient. The objective of this study was to discuss a clinical case of a partially edentulous patient treated in the Implantodontic Surgery Post-Graduation Course from the Kenedy Dentistry Institute Mozarteum/Famosp Unit – Goiânia-Brazil), and submitted to osseointegrated implants surgical fixation techniques. A modality of differential diagnosis was established after osseointegration period, it aimed at facilitating the choice of a rehabilitation model that could favor the patient’s and professional`s expectations. Therefore the appreciated aspects were function, comfort, aesthetics, and especially the patient satisfaction.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

INTRODUÇÃO: A via de acesso transfemoral é preferencial para o implante por cateter de bioprótese valvar aórtica. Entretanto, algumas situações, como a presença de doença vascular periférica, impossibilitam a utilização desse acesso. Nesses casos, o acesso por dissecção da artéria subclávia é uma alternativa para a realização do procedimento. Nosso objetivo foi avaliar a experiência brasileira com a utilização da artéria subclávia como via de acesso para o implante por cateter da bioprótese CoreValve®. MÉTODOS: Foram requisitos para o procedimento área valvar aórtica < 1 cm², ânulo valvar aórtico ≥ 20 mm e ≤ 27 mm (CoreValve® de 26 mm e 29 mm), aorta ascendente ≤ 43 mm e artéria subclávia com diâmetro ≥ 6 mm, isenta de lesões obstrutivas significativas, tortuosidade acentuada e calcificação excessiva. O acesso pela artéria subclávia foi obtido por dissecção cirúrgica e, sob visão direta, punção da artéria subclávia. Obtido o acesso arterial, empregou-se a técnica padrão. RESULTADOS: Entre janeiro de 2008 e abril de 2012, 8 pacientes com doença vascular periférica foram submetidos a implante de prótese CoreValve® pela artéria subclávia em 4 instituições. O procedimento foi realizado com sucesso em todos os casos, com redução do gradiente transvalvar aórtico médio de 46,4 ± 17,5 mmHg para 9,3 ± 3,6 mmHg (P = 0,0018) e melhora dos sintomas. Aos 30 dias e no seguimento de 275 ± 231 dias, 87,5% e 62,5% dos pacientes, respectivamente, apresentavam-se livres de complicações maiores (óbito, infarto do miocárdio, acidente vascular cerebral e cirurgia cardíaca de urgência). CONCLUSÕES: Na experiência brasileira, o acesso pela artéria subclávia mostrou-se seguro e eficaz como via alternativa para o implante por cateter da bioprótese CoreValve®.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Durante nossas frequentes apresentações em cursos, congressos e jornadas e mesmo em nossas publicações, existiam constantes perguntas sobre o perfil dessas pacientes. O crescente interesse da mídia e das pacientes a este respeito e também a crescente procura pela cirurgia nos estimulou a realizar este trabalho. Segundo dados da Sociedade Brasileira de Cirurgia Plástica (SBPC) e da American Society of Plastic Surgery (ASPS), referem que 20.000 pacientes foram submetidas a esta cirurgia. Em 2012, 40.000 pares de implantes glúteos foram produzidos. Existe um crescimento da cirurgia de 20% nos últimos três anos e no Brasil houve aumento de 42% em 2011. Esta tese tem como objetivo estabelecer o perfil epidermiologico das pacientes que se submetem a gluteoplastia de aumento utilizando implantes de silicone, avaliar o grau de satisfação com resultado e a correlação deste com o volume dos implantes utilizados. Cinquenta pacientes responderam a um questionário e foram examinadas pelo cirurgião e outro médico. Outras 37 pacientes foram avaliadas prospectivamente com tomografia computadorizada e volumetria, avaliação de resultado por oito cirurgiões plásticos, medidas antropométricas e correlação destas variáveis. A análise destes dados evidenciou tratar-se de cirurgia com baixo índice de complicação e alto índice de satisfação com resultado (96%). A maior procura foi por pacientes brancas (62%) e pardas (34%). Não percebemos relação de profissão ou nível socioeconômico com a procura pela cirurgia. Observou-se um alto número de pacientes que referiram naturalidade do resultado, sendo que em 94% dos casos, ninguém notou que a paciente havia se submetido à cirurgia, sem que a própria desse esta informação. As queixas, quando existiram, 4% foram referentes a terem achado as próteses pequenas. O tempo de recuperação da maioria (60%) para atividades normais foi de até 45 dias. Houve grande influência positiva na vida sexual e afetiva das pacientes que se submeteram a esta cirurgia. A correlação entre o volume dos implantes utilizados e das medidas antropométricas com o resultado estético da operação não demonstrou significância estatística. Conclui-se que as pacientes que desejam a gluteoplastia são predominantemente brancas e na quarta década de vida. A operação alcança altos índices de satisfação e o volume dos implantes apresenta correlação positiva com a renda mensal, a idade e a satisfação das pacientes, porém com maior tempo de recuperação. Quando o resultado é avaliado por cirurgiões plásticos, este não apresenta correlação com o volume dos implantes ou com as medidas antropométricas das pacientes.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

A operação para aumento de glúteos com implantes teve início no fim da década de 1960, entretanto a técnica intramuscular, considerada padrão atualmente, foi descrita cerca de 30 anos depois. Cirurgiões e pacientes apresentam crescente interesse na realização do aumento de glúteos haja vista que sua frequência apresenta aumento nos últimos anos. A utilização de implantes intramusculares que superam o volume do músculo em mais de cinquenta por cento configura uma situação nova que deve ser estudada. O tecido muscular estriado esquelético apresenta grande suscetibilidade para atrofia secundariamente à compressão, e sendo o glúteo máximo um músculo importante na manutenção da postura ereta, deambulação, corrida e salto, é necessário pesquisar possíveis alterações musculares decorrentes da operação. O objetivo deste estudo é avaliar o volume e força do músculo glúteo máximo ao longo de 12 meses após a introdução de implantes intramusculares, o posicionamento destes implantes no interior da musculatura e mudanças antropométricas obtidas com a operação. Foram selecionadas 48 mulheres, 24 candidatas a gluteoplastia de aumento com implantes compuseram o grupo de estudo e 24 candidatas a mamoplastia de aumento compuseram o grupo controle de acordo com os critérios de inclusão e exclusão. As pacientes foram avaliadas em quatro momentos diferentes: pré-operatório e após três, seis e 12 meses da operação. Em todas as etapas foi realizada avaliação clínica nutricional, tomografia computadorizada com reconstrução 3D e teste isocinético. Todas as pacientes permaneceram afastadas de atividades físicas durante três meses após a operação. Foram utilizados implantes glúteos em gel coesivo de base oval e superfície lisa com volumes de 350 cm3 e 400 cm3. O nível de significância estatística foi mantido em 5%. As pacientes candidatas a gluteoplastia apresentaram valores da relação entre as medidas da cintura e do quadril maiores que aquelas do grupo controle. A operação de aumento glúteo com implantes demonstrou eficácia na melhora desta relação. Os implantes apresentaram posição obliqua com inclinação semelhante à das fibras musculares após três meses da operação, independente da posição em que foram inseridos. As pacientes do grupo de estudo apresentaram atrofia muscular após 12 meses em 6,14% à esquerda e 6,43% à direita, as pacientes do grupo controle não apresentaram atrofia. A força muscular apresentou redução do valor de torque máximo durante a flexão do quadril a 30 /s em ambos os grupos e aumento do torque máximo durante a adução a 60 /s apenas no grupo de estudo. Concluímos que a introdução de implante de silicone no interior do músculo glúteo máximo causa atrofia muscular após 12 meses. As variações na força deste músculo nesse período não podem ser atribuídas primariamente à operação ou à presença dos implantes em seu interior. Os implantes permaneceram em posição obliqua. O aumento de glúteos com implantes gera mudanças antropométricas nas mulheres submetidas a esta operação.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The evaluation criteria of the cases treated with dental implants are based on clinical and radiographic tests. In this context it is important to conduct research to determine prognosis of different types of prosthetic rehabilitation and determination of the main problems affecting this type of treatment. Thus, the objective of this study was to assess the prosthetic conditions of individuals rehabilitated with implant-supported prosthesis. In this cross-sectional study 153 patients were treated, accounting for a sample of 509 implants. The failures were observed by clinical and radiographic examination. The results showed that the fracture (0.2%) loss (0.4%) and loosening of the screws (3.3%) were failures are less frequent. The fracture structures as the resin (12.4%), porcelain (5.5%) and metallic (1.5%), loss of resin that covers the screw (23.8%) and loss of retention overdentures on implants (18.6%) had a higher occurrence. The failure of adaptation between the abutment and the implant (6.9%) and especially between the prosthesis and the abutment (25.4%) had a high prevalence and, when related to other parameters showed a significant association, particularly with the cemented prosthesis (OR = 6.79). It can be concluded that to minimize the appearance of failures, protocols must be observed from diagnosis to the settlement and control of prostheses on implants, particularly with respect to technical steps of the making of the prosthesis and care in radiographic evaluating the fit between their components

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Um longo caminho foi percorrido desde as primeiras intervenções cirúrgicas feitas para o tratamento do aneurisma de aorta abdominal. Ao longo deste tempo, várias inovações foram criadas, no sentido de reduzir a invasividade dos procedimentos e melhorar sua segurança e durabilidade. Nesta revisão, são discutidos os principais e recentes avanços em intervenções sobre aneurismas aórticos, incluindo a restauração aórtica endovascular, a cirurgia aórtica videolaparoscópica, as técnicas híbridas convencionais e endovasculares, as técnicas combinadas videolaparoscópicas e endovasculares, bem como as perspectivas futuras, tanto para aorta torácica como abdominal. Diante de tantas transformações e evolução, o cirurgião vascular moderno terá que ter sua mente aberta para as novidades e desenvolver capacitação ampla com diferentes técnicas para proporcionar a melhor opção terapêutica para seus pacientes.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The objective of this study was to evaluate the impact of replacing conventional mandibular complete dentures by complete fixed dentures on the oral health-related quality of life and kinesiographic parameters of maxillary edentulous patients. Material and Methods: edentulous patients (n = 16) received one set of new complete dentures and after the intraoral adjustments and adaptation period (30 days), the Brazilian version of Oral Health Impact Profile for assessing edentulous subjects (Ohip-Edent) was used to evaluate the oral health-related quality of life (OHQOL) of the participants. Additionally, the kinesiograph instrument K6-I (Myotronics Research Inc., Seattle, WA) was used to record opening and closure range of movement, mandibular movement, and the pattern of maxillary complete denture movement on chewing. Afterwards, the patients had their mandibular complete dentures replaced by a complete fixed denture and the same evaluation protocol was performed after 3 and 6 months. Ohip-Edent responses were analyzed using Wilcoxon's test for repeated measures (α = .05) and Kinesiographic data using the Student´s t test (α = .05). Results: The Ohip-Edent showed an improvement of general oral health-related quality of life after 3 and 6 months of the treatment with complete fixed dentures. Kinesiographic recordings revealed a significant increase on maximum mandibular movements of vertical opening and no differences for the movement of the maxillary complete denture on chewing after treatment with complete fixed dentures was observed. Conclusion: the installation of complete fixed dentures improved the OHQOL and changed mandibular movements, with increases in vertical amplitude of maximal opening.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The purpose of this study was to evaluate the macroscopy and microstructure of a double setting alpha-tricalcium phosphate bone cement sphere provided with interconnection channels (alpha-TCP-i), as well as the integration of the implant with the rabbits' orbital tissue, through macroscopic analysis and histopathology. The external and internal surfaces of the alpha-TCP-i were evaluated macroscopically and by electron microscopy. Twelve New Zealand rabbits received 12mm implants of alpha-TCP-i following enucleation of the left eye. The clinical assessment was undertaken daily during the first 15 days, followed by fortnightly assessment until the end of the study period. For the morphological analysis, exenteration was performed in 3 animals per experimental period (15, 45, 90 and 180 days). The external and internal surfaces of the implant appeared solid, smooth and compact, with six channels which interconnected centrally. The micro-architecture was characterized by the formation of columns of hexagonal crystals. No signs of infection, exposure, dehiscence of sutures or extrusion of the implant were noted in any of the animals during the entire period of the study. The morphological evaluation demonstrated the presence of a thin capsule around the implant, from whence appeared fibro-vascular projections, which penetrated it through the interconnecting channels. In the first days after the insertion of the implant, an intense inflammatory reaction was noted. At 180 days, however, there were no signs of inflammation. The alpha-tricalcium phosphate cement implant was well tolerated in this rabbit model and appeared to be relatively inert with some fibrovascular ingrowth through the large channels.