993 resultados para IT utilisation
Resumo:
Réalisé en cotutelle avec Claude Sicotte PhD Université de Montréal et le Pr. Étienne Minvielle École des Hautes Études en Santé Publique à Paris.
Resumo:
This article examines contemporary feminist arguments about contract. It does not aim to advance new arguments for or against contract but to call into question the dominant feminist position which is that contract has to be cast aside and/or that alternative approaches to contract have to be developed in order to advance the position of women. In a reworking of Elizabeth Kingdom's anti-essentialist approach to rights, Sullivan argues that a feminist but non-essentialist approach to contract is both possible and desirable. Sullivan explores a number of concrete situations in the Australian context where contract approaches have been deployed in law and public policy and demonstrates that contract may be detrimental or advantageous to the position of women. Sullivan argues, therefore, for a strategic and critical feminist approach to the utilisation of the language and practice of contract.
Resumo:
Known algorithms capable of scheduling implicit-deadline sporadic tasks over identical processors at up to 100% utilisation invariably involve numerous preemptions and migrations. To the challenge of devising a scheduling scheme with as few preemptions and migrations as possible, for a given guaranteed utilisation bound, we respond with the algorithm NPS-F. It is configurable with a parameter, trading off guaranteed schedulable utilisation (up to 100%) vs preemptions. For any possible configuration, NPS-F introduces fewer preemptions than any other known algorithm matching its utilisation bound. A clustered variant of the algorithm, for systems made of multicore chips, eliminates (costly) off-chip task migrations, by dividing processors into disjoint clusters, formed by cores on the same chip (with the cluster size being a parameter). Clusters are independently scheduled (each, using non-clustered NPS-F). The utilisation bound is only moderately affected. We also formulate an important extension (applicable to both clustered and non-clustered NPS-F) which optimises the supply of processing time to executing tasks and makes it more granular. This reduces processing capacity requirements for schedulability without increasing preemptions.
Resumo:
A composting Heat Extraction Unit (HEU) was designed to utilise waste heat from decaying organic matter for a variety of heating application The aim was to construct an insulated small scale, sealed, organic matter filled container. In this vessel a process fluid within embedded pipes would absorb thermal energy from the hot compost and transport it to an external heat exchanger. Experiments were conducted on the constituent parts and the final design comprised of a 2046 litre container insulated with polyurethane foam and kingspan with two arrays of qualpex piping embedded in the compost to extract heat. The thermal energy was used in horticultural trials by heating polytunnels using a radiator system during a winter/spring period. The compost derived energy was compared with conventional and renewable energy in the form of an electric fan heater and solar panel. The compost derived energy was able to raise polytunnel temperatures to 2-3°C above the control, with the solar panel contributing no thermal energy during the winter trial and the electric heater the most efficient maintaining temperature at its preset temperature of 10°C. Plants that were cultivated as performance indicators showed no significant difference in growth rates between the heat sources. A follow on experiment conducted using special growing mats for distributing compost thermal energy directly under the plants (Radish, Cabbage, Spinach and Lettuce) displayed more successful growth patterns than those in the control. The compost HEU was also used for more traditional space heating and hot water heating applications. A test space was successfully heated over two trials with varying insulation levels. Maximum internal temperature increases of 7°C and 13°C were recorded for building U-values of 1.6 and 0.53 W/m2K respectively using the HEU. The HEU successfully heated a 60 litre hot water cylinder for 32 days with maximum water temperature increases of 36.5°C recorded. Total energy recovered from the 435 Kg of compost within the HEU during the polytunnel growth trial was 76 kWh which is 3 kWh/day for the 25 days when the HEU was activated. With a mean coefficient of performance level of 6.8 calculated for the HEU the technology is energy efficient. Therefore the compost HEU developed here could be a useful renewable energy technology particularly for small scale rural dwellers and growers with access to significant quantities of organic matter
Resumo:
As an emerging alternative to DXA, there is a growing interest in the use of quantitative ultrasound (QUS) measurements for the non invasive assessment of fracture risk in the management of osteoporosis. While the potential of QUS in the management of osteoporosis have been highly recognized by the scientific community and granted by the majority of the international bone disease organizations, it becomes important to develop strategies how to use ultrasound clinically. Our paper is highlighting Swiss operational clinical propositions for 2 QUS devices sold in Switzerland, on how to use the QUS in the management of osteoporosis.
Resumo:
Fecal calprotectin is a small protein released mainly by neutrophils. It is recognized as a reliable, easy and non-invasive biomarker of gastro-intestinal inflammation. Normal values vary with age, with higher cut-off values during the first year of life (<350 microg/g) than in children (<275 microg/g) or adults (<50 microg/g). Fecal calprotectin can be a useful tool in initial evaluation of recurrent abdominal pain, helping to distinguish between functional gastro-intestinal disorders, where it is normal, and inflammatory bowel disease (IBD). It is not a specific marker of IBD but is increased in other situations of gastro-intestinal inflammation. In patients with IBD, fecal calprotectin is used to monitor treatment response.
Resumo:
RésuméCette thèse traite d'un domaine d'application de l'écologie industrielle, les symbioses industrielles, comme stratégie d'amélioration de la consommation des ressources matérielles et énergétiques et de la gestion des déchets par les activités économiques. Les symbioses industrielles cherchent à créer de nouvelles collaborations directement entre les acteurs économiques d'un territoire dans le but d'échanger de l'information, des matières premières et des déchets, et d'intensifier les mutualisations de services et d'infrastructures possibles entre entreprises voisines. Ces quatre types de collaboration sont représentés schématiquement dans la figure ci-dessous.Dans ce travail, la détection et la mise en oeuvre de symbioses industrielles sont abordées sous plusieurs angles. Les recherches réalisées concernent le développement de procédures de mise en oeuvre s'adressant aux collectivités publiques, aux institutions académiques et aux bureaux de conseil dans le domaine de l'environnement. Les objectifs des procédures sont de créer une dynamique de collaboration et de confiance entre les acteurs économiques et l'administration publique d'un territoire afin de détecter des symbioses industrielles potentielles. Ces procédures requièrent la gestion de grandes quantités d'informations relatives aux flux de matière et d'énergie.Un travail de terrain, réalisé sur les territoires du canton de Genève et de Lausanne Région et utilisé comme études de cas, a permis de mettre en évidence un grand nombre de symbioses industrielles qui existent déjà en Suisse romande. Plusieurs dizaines d'exemples ont été identifiés principalement dans lesdomaines de la gestion de l'eau, de l'énergie, des produits chimiques et des matériaux de construction. La législation suisse autoriserait cependant la concrétisation de nombreuses autres opportunités. Dans cette recherche, celles-ci sont évaluées techniquement, légalement, économiquement et environnementalement. La création d'un référentiel d'évaluation des opportunités permet de déterminer quelles sont les symbioses industrielles techniquement réalisables et pertinentes dans le contexte suisse et dans quels cas celles-ci représenteraient une réelle plus-value par rapport à l'utilisation actuelle de la ressource et aux filières existantes de collecte et de valorisation des déchets.Finalement, un logiciel, SymbioGIS, destiné à soutenir la détection et l'évaluation de symbioses industrielles potentielles a été développé. Il s'agit d'une interface web accessible pour de nombreux utilisateurs, couplée à une interface de systèmes d'information géographique. En plus de la détection de symbioses industrielles, plusieurs fonctionnalités sont proposées pour faciliter la prise en compte des flux de matière et d'énergie dans les problématiques liées à l'aménagement du territoire et au positionnement des activités économiques.En conclusion, cette recherche met en évidence la nécessité de rapprocher les institutions publiques en charge de la protection de l'environnement, de la promotion économique et de l'aménagement du territoire pour favoriser l'essor des symbioses industrielles comme stratégie pour la gestion des ressources matérielles et énergétiques. Elle propose des pistes pour intensifier les collaborations entre ces domaines et accélérer le partage des connaissances liées aux flux de matière et d'énergie et à leur cheminement au sein des activités économiques afin de rendre le système industriel existant en Suisse romande viable à long terme. Parallèlement, elle étudie les possibilités de transposer ces considérations et les procédures et outils développés dans le contexte économique et social de la région Asie-Pacifique, où se trouvent aujourd'hui de nombreuses activités de production.SummaryIndustrial symbioses: A new strategy for improving how economic activities use material and energy resourcesThis thesis focuses on one application of industrial ecology, industrial symbioses, as a strategy for improving how economic activities consume material and energy resources. Industrial symbioses seek to create new collaborations among economic players with the goal of exchanging information, raw materials, and waste directly among area businesses, and to step up the potential pooling of services and infrastructure among neighboring companies.The identification and implementation of industrial symbioses are studied from several angles. The research first examines the development of implementation procedures for government bodies, academic institutions, and environmental consulting services. The purpose of the procedures is to create a dynamic of collaboration and trust between the economic players and the public officials in a region in order to identify potential industrial symbioses. The procedures necessitate managing large amounts of information about material and energy flows.Fieldwork conducted in the canton of Geneva and the Lausanne region, and used as case studies for the research, highlights a great number of industrial symbioses that already exist in French-speaking Switzerland. Several dozen examples are identified, primarily in the areas of water management, energy, chemical products, and building materials; however, Swiss law would permit many others. The research evaluates these opportunities from a technical, legal, economic, and environmental standpoint. By developing an assessment framework it is possible to determine which industrial symbioses are technically feasible and pertinent in Switzerland, and under what circumstances they would represent real added value compared to the current use of the resource and to existing systems for collecting and reusing waste.Lastly, SymbioGIS software was developed to help identify and assess potential industrial symbioses. The program's Web-based interface can be accessed by multiple users and is coupled with an interface that provides geographic information. In addition to identifying industrial symbioses, several program functionalities make it easier to consider material and energy flows with regard to local development issues and siting economic activities.In conclusion, the research highlights the need to bring together public institutions charged with protecting the environment, promoting economic activity, and overseeing development in order to foster the expansion of industrial symbioses as a strategy for managing material and energy resources. It proposes solutions for stepping up collaboration among these players and accelerating the sharing of knowledge about material and energy flows and their paths within economic activities with the goal of making theexisting industrial system in French-speaking Switzerland viable long-term. Also examined were thepossibilities of transposing these considerations and the study's findings about Switzerland to the economic and social context of the Asia-Pacific region, where much production is now located.
Resumo:
During episodes of trauma carnitine-free total parenteral nutrition (TPN) may result in a reduction of the total body carnitine pool, leading to a diminished rate of fat oxidation. Sixteen patients undergoing esophagectomy were equally and randomly divided and received isonitrogenous (0.2 gN/kg.day) and isocaloric (35 kcal/kg.day TPN over 11 days without and with L-carnitine supplementation (12 mg/kg.day). Compared with healthy controls, the total body carnitine pool was significantly reduced in both groups prior to the operation. Without supplementation carnitine concentrations were maintained, while daily provision of carnitine resulted in an elevation of total carnitine mainly due to an increase of the free fraction. Without supplementation the cumulative urinary carnitine losses were 11.5 +/- 6.3 mmol corresponding to 15.5% +/- 8.5% of the estimated total body carnitine pool. Patients receiving carnitine revealed a positive carnitine balance in the immediate postoperative phase, 11.1% +/- 19.0% of the infused carnitine being retained. After 11 days of treatment comparable values for respiratory quotient, plasma triglycerides, free fatty acids, ketone bodies, and cumulative nitrogen balance were observed. It is concluded that in the patient population studied here carnitine supplementation during postoperative TPN did not improve fat oxidation or nitrogen balance.
Resumo:
PURPOSE: This study analyzes CT examinations in Switzerland. MATERIALS AND METHODS: Using different sources (administrative data on the equipment, a 1998 nationwide inquiry into practices, and data provided by the Swiss University Hospitals of Basel, Zurich, and Lausanne), we determined the frequency of CT examinations (hospitals and private radiologists) in 1998 according to different descriptive variables and studied the progression in CT use over time. RESULTS: CT scanners increased by 7% between 1998 and 2004. The average annual number of CT examinations in 1998 was 46.3/1000 population, 3.4% of all radiological examinations in Switzerland in 1997-1998. The most frequent examination was CT of the skull (24%), while private radiology institutes perform more CTs of the spine. More CT examinations were performed for men than for women (sex ratio M/F=1.17). The average annual increase in CT in Swiss hospitals varied from 8% for Basel to 18% for Lausanne. Finally, the proportion of pediatric examinations was 5%; their numbers appear to be stabilizing. CONCLUSION: There is a significant increase in CT examinations. It is hoped that our study will heighten awareness among doctors of CT examinations in order to optimize their use.
Resumo:
''Like Parents, Like Children?'' Using Secondary Data in the Study of Parental Political Influence in Switzerland: This text is devoted to the intergenerational transmission of left-right ideological orientation. Using data from the Swiss Household Panel (www.swisspanel.ch), collected both directly and through intermediaries, it raises the question of the validity of second-hand information, which is discussed on several points. The article also shows that there is a strong long-term coherence between the ideological orientation of parents and their children. It also highlights the fact that the link is not the same for boys as for girls, and it varies between generations. Finally, it shows that strong upward social mobility, compared to the original environment, facilitates emancipation from parental ideology, social inertia being greater for downward and horizontal mobility. Ce texte est consacré à la transmission intergénérationnelle de l'orientation idéologique gauche-droite. Utilisant des données du Panel Suisse de Ménages (www.swisspanel.ch), collectées tant directement que par personnes interposées, il pose la question de la validité des informations de seconde main, qui est étudiée sur plusieurs points. L'article montre en outre qu'il existe à long terme une forte cohérence entre l'orientation idéologique des parents et de leurs enfants. Il met aussi en évidence que ce lien n'est pas la même auprès des garçons qu'auprès des filles, et qu'il varie entre les générations. Finalement, il montre qu'une forte ascension sociale par rapport au milieu d'origine facilite l'émancipation des orientations idéologiques parentales, l'inertie étant plus forte pour les trajectoires descendantes et horizontales.
Resumo:
Résumé : Au travers de l'étude des régions de Crans-Montana-Sierre (Valais, Suisse) et de Chamonix-Mont-Blanc (Haute-Savoie, France), cette recherche considère les liens existants entre activités touristiques et sciences de la Terre. Ainsi, les sites géologiques et géomorphologiques pris en compte sont perçus comme ayant non seulement une valeur scientifique, mais aussi un intérêt scénique, culturel et économique. D'un point de vue (géo)touristique, différents modèles d'analyse sont proposés pour expliciter les composantes de l'offre et de la demande et comprendre le cycle de vie des objets étudiés. L'offre que constituent ces sites est tout d'abord présentée afin d'évaluer leurs différents potentiels, ainsi que l'utilisation spatio-temporelle, didactique et économique qui en est faite. Ensuite, les logiques d'acteurs sont analysées au travers des phases de valorisation, d'exploitation et de transformation, dans le but de comprendre les facteurs et les projets d'utilisation les concernant. Enfin, la demande des différents publics cibles, de même que leurs caractéristiques socio-touristiques et (géo)didactiques, sont discutées. Pour ce faire, des méthodes d'inventaire, d'évaluation, d'entretien et de questionnaire ont été utilisées, à différentes échelles d'analyse. On constate d'abord que le pôle des valeurs scénique et économique présente une plus forte mise à contribution, par rapport à l'utilisation didactique. De plus, le niveau de protection des sites ne restreint généralement pas leur exploitation, au contraire du facteur risque. Du point de vue des publics cibles, une forte demande d'explications didactiques est exprimée, s'orientant vers une approche multithématique des potentiels à mettre en valeur; des biens et services de base sont ainsi demandés. Enfin, force est de constater que seuls de grands projets peuvent rendre les activités (géo)touristiques rentables. A l'avenir, sachant que le géotourisme peut répondre à une demande touristique liée au rêve et à l'émotion, l'approche de l'offre devrait intégrer une réflexion en didactique des sciences de la Terre, d'autant que cette forme de tourisme tend à devenir une composante du développement économique régional, notamment en dehors de la saison d'hiver. Idéalement, l'utilisation touristique de la géodiversité devrait s'accompagner d'une politique de protection dynamique, combinant préservation et mise en valeur. A terme, le but ultime de cette entreprise est notamment d'élargir la notion de patrimoine culturel, pour favoriser une approche transdisciplinaire du paysage Abstract : Based on the study of the areas of Crans-Montana-Sierre (Valais, Switzerland) and Chamonix-Mont-Blanc (Haute-Savoie, France), this study considers the links between tourism activities and Earth science. Thus, the studied geological and geomorphological sites have not only a scientific va1ue, but also scenic, cultural and economic value. From a point of view of tourism, different models of analysis are examined in order to explain the components of the supply and the demand, and to understand the life cycles of the considered objects. The primary product of these sites is first presented, in order to assess their different potential as well as their didactic, economic, spatial and temporal use. The stakeholders' behaviour is then analysed to understand the factors and projected use, with the help of the optimisation, exploitation and transformation phases. Finally, the demand of the different target markets as well as their socio-tourist and (geo)didactic characteristics are discussed. To complete this study, methods of census, assessment, interviewing and questionnaire surveying are used, at different scales of analysis. The main results appear to demonstrate that the scenic and economic values present a higher value relative to the didactic use. Moreover, the required conservation measures for the studied sites do not generally restrict the use, on the contrary to the "risk" factor. From the point of view of the target market, a relevant requirement for explanatory commentary is expressed and tends towards an approach optimising different themes to utilise potential; basic popular goods and services are also requested. Finally, it is clearly demonstrated that only relevant projects are able to make this kind of activity profitable. For the future, geotourism may be marketed to a tourist demand for imagination and emotion. Consequently, the product approach should integrate a reflection on Earth science popularisation given that this branch of tourism tends to receive a component of the economic and regional development, notably during the summer period. However, the use of geodiversity should include a concept of dynamic management, taking into account conservation as well as tourism development. Thus, the final aim of this process is to r,r'iden the notion of cultural heritage, in order to stimulate a multidisciplinary approach to the landscape.
Resumo:
Traditionally, fossil fuels have always been the major sources of the modern energy production. However prices on these energy sources have been constantly increasing. The utilization of local biomass resources for energy production can substitute significant part of the required energy demand in different energy sectors. The introduction of the biomass usage can easily be started in the forest industry first as it possesses biomass in a large volume. The forest industry energy sector has the highest potential for the fast bioenergy development in the North-West Russia. Therefore, the question concerning rational and effective forest resources use is important today as well as the utilization of the forestry by-products. This work describes and analyzes the opportunities of utilising biomass, mainly, in the form of the wood by-products, for energy production processes in general, as well as for the northwest Russian forest industry conditions. The study also covers basic forest industry processes and technologies, so, the reader can get familiar with the information about the specific character of the biomass utilization. The work gives a comprehensive view on the northwest forest industry situation from the biomass utilisation point of view. By presenting existing large-scale sawmills and pulp and paper mills the work provides information for the evaluation of the future development of CHP investments in the northwest Russian forest industry.
Resumo:
This work is based on the utilisation of sawdust and wood chip screenings for different purposes. A substantial amount of these byproducts are readily available in the Finnish forest industry. A black liquor impregnation study showed that sawdust-like wood material behaves differently from normal chips. Furthermore, the fractionation and removal of the smallest size fractions did not have a significant effect on the impregnation of sawdust-like wood material. Sawdust kraft cooking equipped with an impregnation stage increases the cooking yield and decreases the lignin content of the produced pulp. Impregnation also increases viscosity of the pulp and decreases chlorine dioxide consumption in bleaching. In addition, impregnation increases certain pulp properties after refining. Hydrotropic extraction showed that more lignin can be extracted from hardwood than softwood. However, the particle size had a major influence on the lignin extraction. It was possible to extract more lignin from spruce sawdust than spruce chips. Wood chip screenings are usually combusted to generate energy. They can also be used in the production of kraft pulp, ethanol and chemicals. It is not economical to produce ethanol from wood chip screenings because of the expensive wood material. Instead, they should be used for production of steam and energy, kraft pulp and higher value added chemicals. Bleached sawdust kraft pulp can be used to replace softwood kraft pulp in mechanical pulp based papers because it can improve certain physical properties. It is economically more feasible to use bleached sawdust kraft pulp in stead of softwood kraft pulp, especially when the reinforcement power requirement is moderate.
Resumo:
As it is known, the major problem of membrane filtration is fouling of membrane during the filtration process. There are a lot of methods to prevent or reduce fouling. One very little studied method is applying of magnetic field in membrane filtration. Magnetic field has such advantages as bulk, contact free, nondestructive impact on the sample, thus it can be combined with different types of processes. In addition, the use of magnetic fields has given positive results in various areas of science and life. So, the present thesis is devoted to the research of influence of magnetic field on performances of nanofiltration. In the literature part of the thesis a short description of membrane process and mechanism of reorientation of nanoparticals in magnetic field is presented. The utilization of magnetic field in different spheres of life, in general, and membrane area, in particular, is represented. In the experimental part the influence of magnetic field created by two permanent magnets on filtration of two solutions (citric acid and sodium dodecyl sulfate) was investigated. Factors, which affect on the impact of magnetic field was estimated. The effect of magnetic field was evaluated by measuring a change of pure water permeability after the filtration of model solution. This work demonstrated that direction of magnetic field and the type of molecules of filtered solution has significant effect to the efficiency of nanofiltration. Utilization of magnetic field might increase retention of membrane and flux through membrane and reduce fouling.
Resumo:
"Mémoire présenté à la Faculté des études supérieures en vue de l'obtention du grade de Maîtrise en droit, option recherche (LL.M.)"