Estudio de factibilidad de exportación de quinua elaborada como alimento

En el actual mundo cambiante, la forma de pensar y la cultura de las personas se transforman a gran velocidad. Dentro de estos cambios se incluye la cultura alimenticia de las personas, pues hoy en día se observa un creciente porcentaje de personas que se preocupan por tener una alimentación balanceada y muchos buscan mantener este equilibrio en productos que brinden la mayor cantidad de nutrientes para mantenerse bien física y saludablemente. Mediante ésta investigación se busca explorar las posibilidades de producción y exportación de la quinua con el fin de promocionar y fomentar el cuidado de la salud. Se busca producir quinua y transformarla en producto terminado en forma de barra de cereal, logrando reunir los requerimientos nutricionales que los consumidores buscan hoy en día y aprovechando al máximo las condiciones climáticas que tiene un país como Colombia que hace parte de la región Andina, terreno originario de la quinua.

PET containers in Brazil: Opportunities and challenges of a logistics model for post-consumer waste recycling

The use of post-consumer materials is directly related to reducing the cost of production and extraction of natural resources. Non-recyclable materials are randomly disposed in the environment. Brazil is one of the largest consumers of PET (polyethylene terephthalate) bottles. The purpose of this paper is to describe the opportunities and challenges of the logistics model for post-consumer PET bottle recycling in Brazil, while providing knowledge of its practices along the recycling chain. The results describe the need to educate those directly and indirectly involved in the process: to reduce consumption in order to reduce the amount of waste generated: to structure the post-consumer reverse chain and engage industrial sectors and government, through public policies, to support cleaner technologies along the PET bottle production chain. (C) 2010 Elsevier B.V. All rights reserved.

The challenge of high cube ISO containers for British rail freight operations

Rail freight activity in Britain has increased by almost 50% in the last ten years, with the movement of deep sea ISO containers between ports and inland terminals being a significant growth sector, with considerable further growth potential. High cube ISO containers have become more prevalent, posing a considerable challenge for rail freight operators since much of the rail network has insufficient loading gauge clearance to carry them on standard wagons. This paper investigates the extent to which rail currently handles high cube container movements to/from ports through the analysis of a representative survey of container trains in 2007. The incidence of high cube containers carried by services on gauge-cleared and non-gauge-cleared routes is identified to assess the extent to which a lack of gauge enhancement affects the movement by rail of high cube containers and to identify the impacts of the lack of gauge clearance on operating efficiency. The paper concludes with an evaluation of the likely consequences of the gauge enhancement schemes for which funding is now committed, assessing the extent to which they will reduce or remove the barriers associated with carrying high cube containers between ports and their hinterlands.

Logistics implications of the UK packaging waste regulations

This paper examines the Producer Responsibility Obligations (Packaging Waste) Regulations introduced by the UK Government in 1997. The impact that these Regulations will have on the levels of freight transport activity associated with the collection and redistribution of packaging waste to recovery/recycling facilities is calculated. Findings indicate that the Regulations will lead to a 14% increase in freight vehicle kilometres attributable to packaging waste. The extent to which greater use of reusable containers could help to reduce packaging waste-related transport activity is also modelled. Details arc given of how businesses are responding to the Regulations and how some companies are adapting their logistics systems to incorporate the recovery and recycling of packaging waste as well as replacing disposal packaging with reusable containers. Interviews and case-study material carried out as part of the research are used to support this discussion.

An emergy-based evaluation of a reverse logistics network for steel recycling

Efficient implementation of recycling networks requires appropriate logistical structures for managing the reverse flow of materials from users to producers. The steel sheet distributor studied had established a protocol for scrap recovery with the steel plant and its customers. The company invested in producing containers, hiring a specialized labor force and in purchasing trucks for container transportation to implement the logistics network for recycling. That network interconnected the company with two kinds of customers: the ones returning scrap and the ones who preferred to continue business-as-usual. The logistical network was analyzed using emergy synthesis, and the data obtained were used to evaluate and compare the system's environmental costs and benefits from the perspective of the distributor and the steel plant operator. The use of emergy ternary diagrams provided a way to assess recycle strategies to compare the relative economic and environmental benefits of the logistical network implemented. The minimum quantity of scrap that the distributor must recover to improve environmental benefits was determined allowing decision on whether it is worth keeping the system running. The new assessment method proposed also may help policy-makers to create strategies to reward or incentive users of reverse logistics, and help to establish regulations, by decreasing taxes or stimulating innovation, for effectively implement the National Policy on Solid Waste. (C) 2013 Elsevier Ltd. All rights reserved.

Inbound logistics, the last mile and intermodal high capacity transport – the case of Jula in Sweden

Some of the biggest challenges for intermodal transport competitiveness are the extra handling costs and pre- and post-haulage costs. This paper investigates the use of Intermodal High Capacity Transport (IHCT) for the intermodal transport chain in general and to pre-and post-haulage in particular. The aim is not only to measure the cost reductions from using larger vehicles but to understand how better management of inbound flows through increased integration of logistics processes can increase the efficiency of the last mile. The paper analyses the haulage of two 40 foot containers simultaneously when part of an intermodal transport chain. Data were collected from a demonstration project in Sweden, where permission was obtained to use longer vehicles on an approved route to and from the nearest intermodal terminal. Results indicate substantial cost savings from using longer vehicles for pre- and post-haulage. In addition, the business model whereby the shipper purchased their own chassis and permission was obtained to access the terminal after hours for collecting pre-loaded chassis brought additional cost and planning benefits. The total cost saving was significant and potentially eliminates the cost deficit associated with the last mile.

Inbound logistics, the last mile and intermodal high capacity transport.

Some of the biggest challenges for intermodal transport competitiveness are the extra handling costs and pre- and post-haulage costs. This paper investigates the use of Intermodal High Capacity Transport (IHCT) for the intermodal transport chain in general and to pre-and post-haulage in particular. The aim is not only to measure the cost reductions from using larger vehicles but to understand how better management of inbound flows through increased integration of logistics processes can increase the efficiency of the last mile. The paper analyses the haulage of two 40 foot containers simultaneously when part of an intermodal transport chain. Data were collected from a demonstration project in Sweden, where permission was obtained to use longer vehicles on an approved route to and from the nearest intermodal terminal. Results indicate substantial cost savings from using longer vehicles for pre- and post-haulage. In addition, the business model whereby the shipper purchased their own chassis and permission was obtained to access the terminal after hours for collecting pre-loaded chassis brought additional cost and planning benefits. The total cost saving was significant and potentially eliminates the cost deficit associated with the last mile.

AITPM Email Newsletter Volume 0904, April 2009: Presidents Message

President’s Report Hello fellow AITPM members, A few weeks ago we saw another example of all levels of Government pulling together in real time to try to deal with a major transport incident, this time it was container loads of ammonium nitrate falling off the Pacific Adventurer during Cyclone Hamish and the associated major oil spill due to piercing of its hull off Moreton Bay in southern Queensland. The oil spill was extensive, affecting beaches and estuaries from Moreton Island north to the Sunshine Coast; a coastal stretch of at least 60km. We saw the Queensland Government, Brisbane, Moreton Bay and Sunshine Coast Regional Council crews deployed quickly once the gravity of the situation was realised to clean up toxic oil on beaches and prevent extensive upstream contamination. Environmental agencies public and private were quick to respond to help affected wildlife. The Navy’s HMAS Yarra and another minesweeper were deployed to search for the containers in the coastal area in an effort to have them salvaged before all ammonium nitrate could leach into and harm marine habitat, which would have a substantial impact not only on that environment but also the fishing industry. all of this during the final fortnight before a State election.) While this could be branded as a maritime problem, the road transport and logistics system was crucial to the cleanup. The private vehicular ferries were enlisted to transport plant and equipment from Brisbane to Moreton Island. The plant themselves, such as graders, were drawn from road building and maintenance inventory. Hundreds of Councils’ staff were released from other activities to undertake the cleanup. While it will take some time for us to know the long term impacts of this incident, it seems difficult to fault “grassroots” government crews and their private counterparts, such as Island tourism staff, in the initial cleanup effort. From a traffic planning and management perspective, we should also remember that this sort of incident has happened on road and rail corridors in the past, albeit on lesser scales. It underlines that we do need to continue to protect communities, commercial interests, and the environment through rigorous heavy vehicle management, planning and management of dangerous goods routesincluding rail corridors through urban areas), and carefully considered incident and disaster recovery plans and protocols. I’d like to close in reminding everyone again that AITPM’s flagship event, the 2009 AITPM National Conference, Traffic Beyond Tomorrow, is being held in Adelaide from 5 to 7 August. SA Branch President Paul Morris informs me that we have had over 50 paper submissions to date, from which a very balanced and informative programme of sessions has been prepared. www.aitpm.com has all of the details about how to register, sponsor a booth, session, etc. Best regards all, Jon Bunker

Non-invasive, quantitative analysis of drug mixtures in containers using spatially offset Raman spectroscopy (SORS) and multivariate statistical analysis

In this paper, spatially offset Raman spectroscopy (SORS) is demonstrated for non-invasively investigating the composition of drug mixtures inside an opaque plastic container. The mixtures consisted of three components including a target drug (acetaminophen or phenylephrine hydrochloride) and two diluents (glucose and caffeine). The target drug concentrations ranged from 5% to 100%. After conducting SORS analysis to ascertain the Raman spectra of the concealed mixtures, principal component analysis (PCA) was performed on the SORS spectra to reveal trends within the data. Partial least squares (PLS) regression was used to construct models that predicted the concentration of each target drug, in the presence of the other two diluents. The PLS models were able to predict the concentration of acetaminophen in the validation samples with a root-mean-square error of prediction (RMSEP) of 3.8% and the concentration of phenylephrine hydrochloride with an RMSEP of 4.6%. This work demonstrates the potential of SORS, used in conjunction with multivariate statistical techniques, to perform non-invasive, quantitative analysis on mixtures inside opaque containers. This has applications for pharmaceutical analysis, such as monitoring the degradation of pharmaceutical products on the shelf, in forensic investigations of counterfeit drugs, and for the analysis of illicit drug mixtures which may contain multiple components.