Aplicación de la metodología Six Sigma para solucionar problemas de calidad en una empresa metalmecánica

En la actualidad muchas compañías enfocan sus esfuerzos en la chequera del cliente generando con esto una cortina de humo al interior de la empresa que hace que se descuiden los costos, se conviva con actividades que no agregan valor y se desconozcan las causas de los principales problemas de calidad que afectan al cliente. Este es el caso de la compañía metalmecánica objeto de esta investigación, la cual venía sobrellevando altos niveles de inventarios, reprocesos, problemas de calidad, falta de corresponsabilidad del personal, y otras situaciones que la estaban dejando vulnerable ante la competencia. Este fue el motivo que inspiró esta investigación en aras de validar una metodología de mejora continua para identificar, analizar, proponer, evaluar y reducir los costos de no calidad y sus implicaciones, de una forma ordenada, rigurosa y disciplinada. Posterior a la implementación del plan de acción los resultados no se hicieron esperar y la compañía mejoró su servicio al cliente sin incurrir en excesos de inventario, al igual que disminuyó sus sobrecostos de producción, los cuales eran generados en gran medida por problemas de calidad. Pero lo más significativo es que asimiló que esta metodología es un proceso continuo que no puede parar y que todo el personal de la empresa debe estar implicado.

Hot-dip galvanized steel dip-coatedwith ureasilicate hybrid in simulated concrete pore solution: Assessment of coating morphology and corrosion protection efficiency

The barrier effect and the performance of an organic–inorganic hybrid (OIH) sol–gel coating are highlydependent on the coating deposition method as well as processing conditions. In this work, studies onthe influence of experimental parameters using the dip coating method were performed. Factors suchas residence time (Rt), a curing step between each dip step and the number of layers of sol–gel OIHfilms deposited on HDGS to prevent corrosion in highly alkaline environments were studied. These OIHcoatings were obtained using a functionalized siloxane, 3-isociantepropyltriethoxysilane that reactedwith a diamino-functionalized oligopolymer (Jeffamine®D-230). The barrier efficiency of OIH coatings insimulated concrete pore solutions (SCPS) was assessed in the first moments of contact, by electrochemicalimpedance spectroscopy and potentiodynamic methods. The durability and stability of the OIH coatings inSCPS was monitored during eight days by macrocell current density. The morphological characterizationof the surface was performed by scanning electronic microscopy before and after exposure to SCPS.Glow discharge optical emission spectroscopy was used to obtain quantitative composition profiles toinvestigate the thickness of the OIH coatings as a function of the number of layers deposited and theinfluence of the Rt in the coating thickness.

Hot-Dip Aluminizing of Low-Carbon Steels

In a relatively short period of sixty-five years, aluminum has grown to the rank of fifth in total weight of met­als produced in the world. Throughout its short life, aluminum has been found to have excellent corrosion-resistant properties; yet only in recent years has aluminum been under consideration as a corrosion-resistant coating for iron and steel.

A deep learning model for controlling the galvanizing process in a production line

In the industry of steelmaking, the process of galvanizing is a treatment which is applied to protect the steel from corrosion. The air knife effect (AKE) occurs when nozzles emit a steam of air on the surfaces of a steel strip to remove excess zinc from it. In our work we formalized the problem to control the AKE and we implemented, with the R&D dept.of MarcegagliaSPA, a DL model able to drive the AKE. We call it controller. It takes as input the tuple : a tuple of the physical conditions of the process line (t,h,s) with the target value of the zinc coating (c); and generates the expected tuple of (pres and dist) to drive the mechanical nozzles towards the (c). According to the requirements we designed the structure of the network. We collected and explored the data set of the historical data of the smart factory. Finally, we designed the loss function as sum of three components: the minimization between the coating addressed by the network and the target value we want to reach; and two weighted minimization components for both pressure and distance. In our solution we construct a second module, named coating net, to predict the coating of zinc resulting from the AKE when the conditions are applied to the prod. line. Its structure is made by a linear and a deep nonlinear “residual” component learned by empirical observations. The predictions made by the coating nets are used as ground truth in the loss function of the controller. By tuning the weights of the different components of the loss function, it is possible to train models with slightly different optimization purposes. In the tests we compared the regularization of different strategies with the standard one in condition of optimal estimation for both; the overall accuracy is ± 3 g/m^2 dal target for all of them. Lastly, we analyze how the controller modeled the current solutions with the new logic: the sub-optimal values of pres and dist can be optimize of 50% and 20%.

Kustannusmallien kehitys BCTMP- ja DIP-prosessien simulointimalleihin

Massa- ja paperiteollisuuden päästöt ovat vähentyneet huomattavasti viime vuosikymmenten aikana. Tiukentuvat viranomaismääräykset ja ympäristörajoitukset tulevat vaatimaan päästöjen määrien vähentämistä edelleen. Päästöttömät massanvalmistusprosessit olisivat ratkaisu näiden määräysten täyttämiseksi.Tämän työn tavoitteena on kehittää kustannusmallit Balas-ohjelmalla simuloitaville virtuaalisille BCTMP- sekä DIP-massanvalmistusprosesseille. Tarkoituksena on, että kustannusmallien avulla voidaan selvittää valmistusprosessien kustannusrakenteet ja erilaisten päästöttömyysratkaisujen vaikutus kustannusrakenteeseen. Lisäksi mallien avulla selvitetään päästöttömyysinvestointien kannattavuudet sekä mahdollisten päästöistä aiheutuvien kustannusten nousun vaikutus tehtyjen päästöttömyysinvestointien kannattavuuteen.Työn tuloksena syntyi Excel-taulukkolaskentaohjelmalla laadittu kustannuslaskentamalli, jonka avulla saadaan laskettua prosessien muuttuvat, kiinteät sekä pääomakustannukset toimintokohtaisesti. Teoriapohjana prosessien toimintojen määrittämisessä käytettiin toimintolaskentaa. Investointien kannattavuutta mallissa tarkastellaan nykyarvon, sisäisen korkokannan sekä takaisinmaksuajan menetelmällä. Kustannusten laskennassa käytettävät hintatiedot perustuvat laitetoimittajien tarjouksiin, massa-, paperi- ja kemikaalivalmistajien haastatteluihin sekä kirjallisuustutkimukseen.

Submarine emissions on the seafloor : from cold seeps to hot vents

[EN] The main types of submarine geological emissions are classified as cold seeps (hydrocarbons and brines) and hot vents. These processes result in the emission of geological fluids: brine, gases (mainly hydro-carbons), sediments and rocks. Submarine emissions are associated with an intensive geological, geo-chemical, thermal and biological activity (Judd and Hovland, 2007), and constitute a key process in the dynamics of the global cycles of the planet Earth.

Designing next generation car washing machines with rotary brushes

Tese de Doutoramento - Leaders for Technical Industries (LTI) - MIT Portugal

A cost study of common surface finish systems for steel structures

This paper presents part of a study aimed at finding a suitable, yet cost-effective, surface finish for a steel structure subject to the car washing environment and corrosive chemicals. The initial, life cycle and average equivalent annual (AEAC) costs for surface finishing methods were calculated for a steel structure using the LCCC algorithm developed by American Galvanizers Association (AGA). The cost study consisted of 45 common surface finish systems including: hot-dip galvanization (HDG), metallization, acrylic, alkyd and epoxy as well as duplex coatings such as epoxy zinc and inorganic zinc (IOZ). The results show that initial, life cycle and AEAC costs for hot dip galvanization are the lowest among all the other methods, followed by coal tar epoxy painting. The annual average cost of HDG for this structure was estimated about €0.22/m2, while the other cost-effective alternatives were: IOZ, polyurea, epoxy waterborne and IOZ/epoxy duplex coating.

Ureasilicate hybrid coatings for corrosion protection of galvanized steel in chloride-contaminated simulated concrete pore solution

Organic-inorganic hybrid (OIH) sol-gel coatings based on ureasilicates (U(X)) have promising properties for use as eco-friendly coatings on hot dip galvanized steel (HDGS) and may be considered potential substitutes for pre-treatment systems containing Cr(VI). These OIH coatings reduce corrosion activity during the initial stages of contact of the HDGS samples with highly alkaline environments (cementitious media) and allow the mitigation of harmful effects of an initial excessive reaction between cement pastes and the zinc layer. However, the behavior of HDGS coated with U(X) in the presence of chloride ions has never been reported. In this paper, the performance of HDGS coated with five different U(X) coatings was assessed by electrochemical measurements in chloride-contaminated simulated concrete pore solution (SCPS). U(X) sol-gel coatings were produced and deposited on HDGS by a dip coating method. The coatings performance was evaluated by electrochemical impedance spectroscopy, potentiodynamic polarization curves measurements, macrocell current density and polarization resistance in contact with chloride-contaminated SCPS. The SEM/EDS analyses of the coatings before and after the tests were also performed. The results showed that the HDGS samples coated with the OIH coatings exhibited enhanced corrosion resistance to chloride ions when compared to uncoated galvanized steel.

A novel procedure for establishing clinching parameters for high strength steel sheet

The building industry has a particular interest in using clinching as a joining method for frame constructions of light-frame housing. Normally many clinch joints are required in joining of frames.In order to maximise the strength of the complete assembly, each clinch joint must be as sound as possible. Experimental testing is the main means of optimising a particular clinch joint. This includes shear strength testing and visual observation of joint cross-sections. The manufacturers of clinching equipment normally perform such experimental trials. Finite element analysis can also be used to optimise the tool geometry and the process parameter, X, which represents the thickness of the base of the joint. However, such procedures require dedicated software, a skilled operator, and test specimens in order to verify the finite element model. In addition, when using current technology several hours' computing time may be necessary. The objective of the study was to develop a simple calculation procedure for rapidly establishing an optimum value for the parameter X for a given tool combination. It should be possible to use the procedure on a daily basis, without stringent demands on the skill of the operator or the equipment. It is also desirable that the procedure would significantly decrease thenumber of shear strength tests required for verification. The experimental workinvolved tests in order to obtain an understanding of the behaviour of the sheets during clinching. The most notable observation concerned the stage of the process in which the upper sheet was initially bent, after which the deformation mechanism changed to shearing and elongation. The amount of deformation was measured relative to the original location of the upper sheet, and characterised as the C-measure. By understanding in detail the behaviour of the upper sheet, it waspossible to estimate a bending line function for the surface of the upper sheet. A procedure was developed, which makes it possible to estimate the process parameter X for each tool combination with a fixed die. The procedure is based on equating the volume of material on the punch side with the volume of the die. Detailed information concerning the behaviour of material on the punch side is required, assuming that the volume of die does not change during the process. The procedure was applied to shear strength testing of a sample material. The sample material was continuously hot-dip zinc-coated high-strength constructional steel,with a nominal thickness of 1.0 mm. The minimum Rp0.2 proof stress was 637 N/mm2. Such material has not yet been used extensively in light-frame housing, and little has been published on clinching of the material. The performance of the material is therefore of particular interest. Companies that use clinching on a daily basis stand to gain the greatest benefit from the procedure. By understanding the behaviour of sheets in different cases, it is possible to use data at an early stage for adjusting and optimising the process. In particular, the functionality of common tools can be increased since it is possible to characterise the complete range of existing tools. The study increases and broadens the amount ofbasic information concerning the clinching process. New approaches and points of view are presented and used for generating new knowledge.

Särmäyksen kustannusperusteinen hinnoittelu

Tässä diplomityössä on tutkittu särmäyksen eri muuttujien vaikutusta kustannusrakenteeseen. Tutkimusmenetelminä on käytetty kirjallisuusselvitystä sekä särmäysaikojen mittausta tuotannossa. Diplomityön tavoitteena oli saada aikaan kustannusperusteinen hinnoittelumalli, jonka avulla särmäyksen hinnoittelu on yksinkertaista ja nopeaa. Särmäysaikoja mitattiin erikokoisille ja -muotoisille kappaleille. Levyn paksuus mitattavilla kappaleilla oli alle 1mm. Muut mitat vaihtelivat alle 200 mm:stä yli 2000 mm:iin. Käytetyt materiaalit olivat sähkö- ja kuumasinkitty teräs. Mitattavia aikoja olivat aika, joka kuluu yhden särmän taivutukseen, aika, joka kuluu yhden kappaleen valmistamiseen sekä ohjelmointiin ja asetuksiin kuluva aika. Särmäysaikoihin vaikuttavat kymmenet eri muuttujat liittyen särmäyspuristimiin, särmättäviin kappaleisiin ja työkaluihin, jne. Osa muuttujista vaikuttaa hyvin vähän kokonaisaikaan, joten kaikkia muuttujia ei lähdetty mittaamaan erikseen. Lisäksi käytössä ollut mittausvälineistö ei ollut riittävän tarkka kaikkien muuttujien mittaamiseen. Aikaansaatu hinnoittelumalli huomioi eri muuttujat ajassa, joka kuluu kappaleiden valmistamiseen, jolloin kaikki muuttujat tulee huomioitua lopullisessa hinnassa.

Stresses of a boat trailer

In this thesis work, a strength analysis is made for a boat trailer. The studied trailer structure is manufactured from Ruukki’s structural steel S420. The main focus in this work is in the trailer’s frame. The investigation process consists two main stages. These stages are strain gage measurements and finite elements analysis. Strain gage measurements were performed to the current boat trailer in February 2015. Static durability and fatigue life of the trailer are analyzed with finite element analysis and with two different materials. These materials are the current trailer material Ruukki’s structural steel S420 and new option material high strength precision tube Form 800. The main target by using high strength steel in a trailer is weight reduction. The applied fatigue analysis methods are effective notch stress and structural hot spot stress approaches. The target of these strength analyses is to determine if it is reasonable to change the trailer material to high strength steel. The static strengths of the S420 and Form 800 trailers is sufficient. The fatigue strength of the Form 800 trailer is considerably lower than the fatigue strength of the S420 trailer. For future research, the effect of hot dip galvanization to the high strength steel has to be investigated. The effect of hot dip galvanization to the trailer is investigated by laboratory tests that are not included in this thesis.

Estudo do efeito bake hardening nos aços BH 180 e BH 220 galvanizados pelo processo de imersão a quente

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência da qualidade das lâminas no desempenho físico-mecânico de painéis compensados de Hevea brasiliensis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Geochemical and isotopic composition of basalts from the axial Mid-Atlantic Ridge, South Atlantic

One of the essential problems of oceanic tectonics is estimation of the influence of plumes of the deep hot mantle on processes in the axial spreading zone. Areas of two giant (St. Helena and Tristan da Cunha) plumes in the Mid-Atlantic Ridge (MAR) rift zone (South Atlantic) are characterized by the effusion of basalts that differ from typical depleted riftogenic tholeiites by anomalously high contents of lithophile components and specific isotopic compositions. Moreover, the rift valley floor with basalt effusion is significantly uplifted above the adjacent sectors of the rift. The formation of the St. Helena Seamount located 400 km east of the MAR axis is related to magmatism that is active to this day. St. Helena Island is a member of the structural ensemble of large volcanic seamounts (Bonaparte, Bagration, and Kutuzov). Like St. Helena Island, each seamount incorporates a series of smaller rises of different morphologies and dimensions. Thus, a system of subparallel series of NE-trending (~45°) rises extend from the seamount ensemble to the African continent. According to the plate tectonics concept, the seamount series represent hotspots related to a deep mantle plume that can be projected onto the present-day St. Helena Island area (St. Helena plume). At the same time, the inferred topographic map based on satellite altimetry data shows that the seamount series also extend along the opposite southwestern direction (~225°) toward the axial MAR and even intersect the latter structure. This fact cannot be explained by the hotspot hypothesis, which suggests stationary positions of plumes relative to the mobile oceanic plate. In the course of Cruise 10 of the R/V Akademik Ioffe (2002), detailed geological and geophysical investigations were carried out at the junction of one structural series with the MAR rift zone located near the Martin Vaz Fracture Zone (Martin Vaz test area, 19°-20° S). The present communication is devoted to the study of lithology, geochemistry, and isotopy of basalts dredged at the test area.