853 resultados para Higher Programs of Technology
Resumo:
Os Cursos Superiores de Tecnologia são um tipo específico de graduação (tecnólogo), com características próprias, entre as quais, a focalização na especialização dos seus currículos e duração mais curta objetivando uma formação mais rápida. A graduação tecnológica vem sendo amplamente difundida no país desde a segunda metade da década de 1990, após a promulgação da lei no 9.394/96 LDB, e por uma série de decretos, portarias e pareceres do MEC/CNE. Entre as principais metas e objetivos do PNE para a educação superior, se destacam: diversificação do sistema superior de ensino para atender clientelas com demandas específicas de formação; articulação entre currículo e mercado de trabalho; financiamento e gestão; criação de políticas de acesso à educação superior que facilitem o ingresso de alunos provenientes de grupos de maior vulnerabilidade educacional; crescimento da oferta de educação superior para a faixa etária de 18 a 24 anos. O presente estudo tem por objetivo refletir e debater a contribuição dos CSTs na educação profissional do trabalhador brasileiro dentro das perspectivas do PNE. O estudo se fundamenta no método qualitativo, com base numa pesquisa exploratória e descritiva, caracterizada como estudo de caso único, através da pesquisa de campo realizada com alunos em formação e com egressos do Curso de Eletrônica Industrial da Faculdade de Tecnologia Senai Anchieta, na cidade de São Paulo. Para alcançar seus objetivos, o estudo foi dividido em duas etapas: a primeira faz uma análise das variáveis que caracterizam o perfil do aluno em formação buscando identificar sua percepção quanto à escolha pelo CST, conhecimento sobre essa modalidade de ensino e as expectativas futuras da profissão. Na segunda parte, o estudo faz uma análise da percepção do egresso acerca das habilidades e competências adquiridas durante a formação, o grau de satisfação com salário e plano de carreira, e a aceitação profissional do tecnólogo pelo mercado de trabalho. No estudo realizado com alunos em formação constatou-se que os índices de evasão escolar das primeiras turmas do curso foram elevados, sendo apontadas como principais causas as dificuldades de conciliação entre o horário de estudo com a do trabalho e as dificuldades econômicas familiares. O perfil do aluno em formação na IES em estudo é majoritariamente da faixa etária entre 18 e 24 anos; do gênero masculino; egresso do ensino médio feito em escola pública; morador em bairro periférico e natural de cidade da RMSP; o próprio aluno é responsável pelo pagamento das mensalidades; não houve interferência de terceiros na sua escolha pelo CST; tem percepção favorável quanto à empregabilidade futura como tecnólogo. A pesquisa com egressos apontou que os mesmos tem percepção favorável quanto à formação profissional recebida, exceto o fato de não terem atendido disciplinas que desenvolvessem competências gerenciais e de negócios; quanto à empregabilidade e perspectivas de carreira mostraram preocupação na valorização profissional do tecnólogo pelo mercado de trabalho; declararam estar insatisfeitos quanto ao salário recebido; quanto à educação continuada reconheceram ser esse o processo que os manterão atualizados profissionalmente. Como conclusão da pesquisa, há recomendação para estudos futuros na sondagem de outras possíveis causas da evasão escolar com alunos dos cursos com outros eixos temáticos e de IES públicas. Igualmente, aponta-se para a necessidade da proposta curricular da IES em estudo oferecer, além das disciplinas técnicas, outras que desenvolvam competências e habilidade em gestão de pessoas e negócios.
Resumo:
The purpose of this study was to evaluate the mechanical engineering technology curriculum effectiveness at the junior college in Taiwan by using the CIPP evaluation model. The study concerned the areas of the curriculum, curriculum materials, individualized instruction, support services, teaching effectiveness, student achievement, and job performance. A descriptive survey method was used with questionnaires for data collection from faculty, students, graduates, and employers.^ All categories of respondents tended to agree that the curriculum provides appropriate occupational knowledge and skills. Students, graduates, and faculty tended to be satisfied with the curriculum; faculty tended to be satisfied with student achievement; graduates tended to be satisfied with their job preparation; and employers were most satisfied with graduates' job performance.^ Conclusions were drawn in the context, input, process, and product of the CIPP model. In Context area: Students were dissatisfied with curriculum flexibility in students characteristics. Graduates were dissatisfied with curriculum design for student's adaptability in new economic and industrial conditions; practicum flexibility in student characteristics; and course overlap. Both students and graduates were dissatisfied with practicum credit hours. Both faculty and students were dissatisfied with the number of required courses.^ In Input area: Students, faculty, and graduates perceived audiovisuals and manipulative aids positively. Faculty and students perceive CAI implementation positively. Students perceived textbooks negatively.^ In Process area: Faculty, students, and graduates perceived all support service negatively. Faculty tended to perceive the ratios of graduates who enter advanced study and related occupation, and who passed the professional skills certification, negatively. Students tended to perceive teaching effectiveness in terms of instructional strategies, the quality of instruction, overall suitability, and receivable, negatively. Graduates also tended to identify the instructional strategies as a negative perception. Faculty and students perceived curriculum objectives and practicum negatively. Both faculty and students felt that instructors should be more interested in making the courses a useful learning experience.^ In Product area: Employers were satisfied with graduates' academic preparation and job performance, adaptability, punctuality, and their ability to communicate, cooperate, and meet organization needs. Graduates were weak in terms of equipment familiarity and supervisory ability.^ In sum, the curriculum of the five-year mechanical engineering technology programs of junior college in Taiwan has served adequately up to this time in preparing a work force to enter industry. It is now time to look toward the future and adapt the curriculum and instruction for the future needs of this high-tech society. ^
Resumo:
Taiwan's technical vocational educational system includes three levels: (1) institutes of technology (two and four year programs), (2) junior colleges (two, three and five year programs), and (3) senior vocational schools. Two-year junior colleges enroll their students through two channels: (1) based on results of the Particular Screening Entrance Examination (PSEE), (2) based on the Joint College Entrance Examination (JCEE). The PSEE has two categories: Category I includes on-time graduates with excellent performance, which means that they are within the top ten of their classes; Category II students include award-winning students in talent contests who have achieved a minimum grade point average of 75%. The JCEE is a regular entrance examination given to any senior vocation school graduate.^ Basic courses have a great impact on the students' academic performance. The purpose of the study was to focus on the effectiveness of teaching mathematics in two-year junior colleges and to analyze and correlate the results of two-year junior college students' performance in calculus and on-time graduation. The target group consisted of 521 students enrolled at National Taipei Institute of Technology in 1993.^ Calculus is a very important course for engineering majors in two-year junior colleges and has a great impact on the students' academic performance. This retrospective study showed that there was a correlation between students' performance in calculus and on-time graduation after two years of study.^ The conclusions of the study urge the Ministry of Education to reform two-year junior college curriculum standards to emphasize basic rudimentary courses. It is recommended that engineering majors receive three hours of calculus per week as the current requirement of only two hours per week is inadequate. The future job market will require a technologically advanced labor force that can be trained in a higher education system. More channels of higher education for two-year junior college graduates should be made available for those wishing to pursue bachelor degrees. Additional work in calculus will not only enhance the opportunities for two-year junior college graduates to continue their pursuit of an advanced academic degree, but also serve them well as they seek career advancement. ^
Resumo:
The purpose of this descriptive study was to evaluate the banking and insurance technology curriculum at ten junior colleges in Taiwan. The study focused on curriculum, curriculum materials, instruction, support services, student achievement and job performance. Data was collected from a diverse sample of faculty, students, alumni, and employers. ^ Questionnaires on the evaluation of curriculum at technical junior colleges were developed for use in this specific case. Data were collected from the sample described above and analyzed utilizing ANOVA, T-Tests and crosstabulations. Findings are presented which indicate that there is room for improvement in terms of meeting individual students' needs. ^ Using Stufflebeam's CIPP model for curriculum evaluation it was determined that the curriculum was adequate in terms of the knowledge and skills imparted to students. However, students were dissatisfied with the rigidity of the curriculum and the lack of opportunity to satisfy the individual needs of students. Employers were satisfied with both the academic preparation of students and their on the job performance. ^ In sum, the curriculum of the two-year banking and insurance technology programs of junior college in Taiwan was shown to have served adequately preparing a work force to enter businesses. It is now time to look toward the future and adapt the curriculum and instruction for the future needs of the ever evolving high-tech society. ^
Resumo:
200 GeV corresponding to baryon chemical potentials (mu(B)) between 200 and 20 MeV. Our measurements of the products kappa sigma(2) and S sigma, which can be related to theoretical calculations sensitive to baryon number susceptibilities and long-range correlations, are constant as functions of collision centrality. We compare these products with results from lattice QCD and various models without a critical point and study the root s(NN) dependence of kappa sigma(2). From the measurements at the three beam energies, we find no evidence for a critical point in the QCD phase diagram for mu(B) below 200 MeV.
Resumo:
This report provides our advice to the Minister for Education and Science on the application for designation as a university made by Waterford Institute of Technology (WIT). WIT submitted an application for designation in February 2006. There is a statutory procedure for the creation of a new university under Section 9 of the Universities Act 1997. We were asked to advise the Minister on the merits of the submission in order for her to provide guidance to Government on whether such a formal statutory review should be initiated. It is not a straightforward task to advise on this case for several reasons. These include the facts that: the regulatory environment for Institutes of Technology has changed significantly since WIT made their application; and the designation of any IoT would potentially challenge the government’s current higher education policy. So our report has to range more widely than the merits of the WIT application, taken at face value.
Resumo:
Tutkielman tavoitteena oli tutkia pienten- ja keskisuurten (PK) ohjelmistoyritysten kansainvälisiä kumppanuuksia. Päätavoitteena oli löytää keinoja kuinka PK-ohjelmistoyritykset voisivat tulla strategisiksi kumppaneksi suurten kansainvälisten yritysten kumppanuusohjelmissa. Lisäksi tutkielmassa oli tavoitteena selvittää kuinka kumppaneiden välistä sitoutumista voitaisiin vahvistaa, jotta PK-ohjelmistoyritykset voisivat saavuttaa todellista lisäarvoa ja kansainvälistä kasvua kumppanuusohjelmien kautta. Tutkielma jakaantuu teoreettiseen ja empiiriseen osaan. Teoreettinen osa keskittyy tarkastelemaan korkean teknologian markkinointia ohjelmistoalalla sekä kansainvälisiä kumppanuuksia. Suurten yritystenkumppanuusohjelmia ei ole tutkittu suomalaisten PK-ohjelmistoyritysten näkökulmasta, minkä vuoksi empiirinen tutkimus on perusteltua. Empiirinen tutkimus toteutettiin laadullisena case-tutkimuksena ja tutkimusmenetelmänä käytettiin puolistrukturoitua haastattelua. Tutkimustulokset osoittavat, että strategisen kumppanin aseman saavuttaminen on pitkä ja haastava matka PK-yrityksille. Suurten kansainvälisten yritysten kumppanuusohjelmat ovat useimmiten monimutkaisia ja todellisen lisäarvon saavuttaminen kumppanuusohjelman kautta vaatii paljon resursseja PK-yrityksiltä. Jotta PK-yritykset voisivat saavuttaa ja säilyttää strategisen kumppanin aseman kumppanuusohjelmassa, vaatii se aktiivista ja päivittäistä vuorovaikutusta kumppaneiden kesken. Erityisesti tiiviit henkilösuhteet oikeiden avainhenkilöiden kanssa ovat välttämättömyys. Läheiset kontaktit mahdollistavat sen, että PK-yritykset voivat ainakin osittain ohittaa kumppanuusohjelman byrokratian, mikä lisää luottamusta ja sitoutumista kumppanuussuhteessa sekä edistää kansainvälistä kasvua ja menestystä liiketoiminnassa.
Resumo:
Tampere University of Technology is undergoing a degree reform that started in 2013. One of the major changes in the reform was the integration of compulsory Finnish, Swedish and English language courses to substance courses at the bachelor level. The integration of content and language courses aims at higher quality language learning, more fluency in studies, and increased motivation toward language studies. In addition, integration is an opportunity to optimize the use of resources and to offer courses that are more tailored to the students' field of study and to the skills needed in working life. The reform also aims to increase and develop co-operation between different departments at the university and to develop scientific follow up. This paper gives an overview of the integration process conducted at TUT and gives examples of adjunct CLIL implementations in three different languages.
Resumo:
The electronic learning has become crucial in higher education with increased usage of learning management systems as a key source of integration on distance learning. The objective of this study is to understand how university teachers are influenced to use and adopt web-based learning management systems. Blackboard, as one of the systems used internationally by various universities is applied as a case. Semi-structured interviews were made with professors and lecturers who are using Blackboard at Lappeenranta University of Technology. The data collected were categorized under constructs adapted from Unified Theory of Acceptance and Use of Technology (UTAUT) and interpretation and discussion were based on reviewed literature. The findings suggest that adoption of learning management systems by LUT teachers is highly influenced by perceived usefulness, facilitating conditions and gained experience. The findings also suggest that easiness of using the system and social influence appear as medium influence of adoption for teachers at LUT.
Resumo:
The brain with its highly complex structure made up of simple units,imterconnected information pathways and specialized functions has always been an object of mystery and sceintific fascination for physiologists,neuroscientists and lately to mathematicians and physicists. The stream of biophysicists are engaged in building the bridge between the biological and physical sciences guided by a conviction that natural scenarios that appear extraordinarily complex may be tackled by application of principles from the realm of physical sciences. In a similar vein, this report aims to describe how nerve cells execute transmission of signals ,how these are put together and how out of this integration higher functions emerge and get reflected in the electrical signals that are produced in the brain.Viewing the E E G Signal through the looking glass of nonlinear theory, the dynamics of the underlying complex system-the brain ,is inferred and significant implications of the findings are explored.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Since 1950, the composition of the U.S. meat diet has shifted markedly from red meats to poultry. For example, from 1970 to 1984, on a percapita basis, beef consumption has declined by 6.4 percent, while chicken and turkey consumptions have increased by 37.9, and 42.5 percent respectively (U.S. Department of Agriculture, 1985). The numerous studies of this phenomenon from the demand side (Chavas, 1983; Braschler, 1983; Nyankori and Miller, 1982; Moschini and Meilke, 1984; Wohlgenant, 1985, Thurman, 1987; Chalfant and Alston, 1988) have failed to achieve a consensus as to whether a change in taste contributed to this shift. One reason for the lack of consensus is that the very large price and quantity changes make it difficult to establish whether consumers are on a new indifference map. But there have been no comparable studies of the nature and causes of the technological change that has made these large consumption and price changes possible. A decrease in the relative price of poultry with respect to red meat is in any case a major explanation of recent shifts in meat consumption patterns. The main reason for such a decrease appears to be a higher rate of technical progress in the poultry industry than in the red meat industry. Substantial productivity gains in both the production and marketing of poultry over the last two decades appears to have been translated into lower retail prices for poultry. Although some productivity gains have taken place in the red meat industry, they have not matched the cost reductions in the poultry industry (Chavas, 1987). Thus, a consumption shift from beef to poultry could possibly be interpreted as a response to changing relative prices, the structural change having occurred in the meat industry. This would imply that, if the beef industry desires to maintain or expand its market, it should seek a decrease in the production and marketing costs of beef.
Resumo:
This study aimed to identify how the graduate programs in nursing stricto sensu evaluated by the Nursing field at Coordination of Improvement of Higher Education Personnel, in the triennium 2007-2009, achieved excellence - grade 6. Descriptive exploratory study of nature documentary, which examined the data of Reports Indicators of these Programs at the site of the Coordination cited, in 2010. We analyzed 99 chips of 33 programs for the triennium 2007 to 2009, grouped in sub-clauses of Social and item categories for grades 6/7. Presents the indicators of excellence of Americans and Brazilians Programs, the results of the triennial assessment relating to sub-items of item 5 and the description of program performance specified for the grade 6. It follows that the excellence of Programs has been gradually achieved, with performance in certain categories as those required by international standards, overcoming the obstacles to the achievement of excellence in all its fullness.
Resumo:
Shipping list no.: 88-342-P.