Role of elasto-plastic analysis under cyclic loading in fatigue crack growth studies

Linear Elastic Fracture Mechanics (LEFM) has been widely used in the past for fatigue crack growth studies, but this is acceptable only in situations which are within small scale yielding (SSY). In many practical structural components, conditions of SSY could be violated and one has to look for fracture criteria based on elasto-plastic analysis. Crack closure phenomenon, one of the most striking discoveries based on inelastic deformations during crack growth, has significant effect on fatigue crack growth rate. Numerical simulation of this phenomenon is computationally intensive and involved but has been successfully implemented. Stress intensity factors and strain energy release rates lose their meaning, J-integral (or its incremental) values are applicable only in specific situations, whereas alternate path independent integrals have been proposed in the literature for use with elasto-plastic fracture mechanics (EPFM) based criteria. This paper presents certain salient features of two independent finite element (numerical) studies of relevance to fatigue crack growth, where elasto-plastic analysis becomes significant. These problems can only be handled in the current day computational environment, and would have been only a dream just a few years ago.

Fatigue crack growth studies on lug joints

Pin loaded lug joints fitted with different types of pins are analysed in the presence of cracks at pin-plate interface. An algorithm for finite element contact stress analysis of joints developed earlier to deal with varying partial contact/separation at the pin-plate interface using a marching solution is used in the present analysis. Stress Intensity Factors (SIF) at the crack tips are evaluated using Modified Crack Closure Integral (MCCI) method within the realm of Linear Elastic Fracture Mechanics (LEFM) assumptions. A comparison of fatigue crack growth lives between interference and push fit pin joints is carried out using these SIF's. Results from a finite element analysis on a push fit pin joint are used to fit experimental fatigue crack growth data.

Use of acoustic emissions in flexural fatigue crack growth studies on concrete

The acoustic emission technique is used for monitoring the fatigue crack growth in plain concrete beams under three-point loading. Variable amplitude loading with step-wise increase in the maximum load is applied. The fatigue crack growth is continuously monitored using six acoustic sensors. The results of load, displacement, crack mouth opening displacement, acoustic events, and acoustic energy are simultaneously acquired during the test. It is seen that a Paris law type of relationship exists between the rate of increase of acoustic emission count per cycle and the stress intensity factor range. Using b-value analysis, different stages of fatigue fracture is explained. (C) 2012 Elsevier Ltd. All rights reserved.

Growth studies of m-GaN layers on LiAlO2 by MOCVD

This paper reports that the m-plane GaN layer is grown on (200)-plane LiAlO2 substrate by metal-organic chemical vapour deposition (MOCVD) method. Tetragonal-shaped crystallites appear at the smooth surface. Raman measurement illuminates the compressive stress in the layer which is released with increasing the layer's thickness. The high transmittance (80%), sharp band edge and excitonic absorption peak show that the GaN layer has good optical quality. The donor acceptor pair emission peak located at similar to 3.41 eV with full-width at half maximum of 120 meV and no yellow peaks in the photoluminescence spectra partially show that no Li incorporated into GaN layer from the LiAlO2 substrate.

Growth studies of sciaenids from Mumbai waters using the Bhattacharya method

Length frequency data of six sciaenids (Johnius macrorhynus, J. vogleri, Otolithes cuvieri, J. sina, Pennahia macrophthalamus, J. dussumieri) were collected from shrimp trawlers at New Ferry Wharf and Sasson Docks landing centers off Greater Mumbai (India). Growth parameters of these species were analyzed via modal progression analysis using Bhattacharya's method. Natural mortality (m) was estimated using Cushing's formula. Comparison of growth parameters was done using the 0' index. The growth parameters obtained were compared with the results of earlier growth studies which used other techniques. This study concludes that the growth parameters obtained are consistent with earlier estimates.

Length frequency and growth studies on Cynoglossus macrolepidotus (Bleeker) off Bombay coast

Specimens randomly collected from Sassoon Docks, Bombay, India, at monthly intervals during 1979 to 1981 were considered for age/growth studies. Cynoglossus macrolepidotus, the fish, attained a length of 202 mm at 1 year, 250 mm at 1 1/2 year and 272 mm at 21 months respectively; the maximum length of the fish could be 353 mm and the life span could be 7 years. The scale ring studies showed presence of only 0 to 3+ rings. Majority of the fishes were of 1 and 1+ year class.

Space growth studies of Ce-doped Bi12SiO20 single crystal

Ce-doped Bi12SiO20 (BSO) single crystal was grown on board of the Chinese Spacecraft-Shenzhou No. 3. A cylindrical crystal, 10 mm in diameter and 40 mm in length, was obtained. The morphology of crystals is significantly different for ground- and space-grown portions. The space- and ground-grown crystals have been characterized by Cc concentration distribution, X-ray rocking curve absorption spectrum and micro-Raman spectrum. The results show that the quality of Ce-doped BSO crystal grown in space is more homogeneous and more perfect than that of ground grown one. (C) 2004 Published by Elsevier B.V.

Testing production functions used in empirical growth studies

We estimate and test two alternative functional forms, which have been used in the growth literature, representing the aggregate production function for a panel of countries: the model of Mankiw, Romer and Weil (Quarterly Journal of Economics, 1992), and a mincerian formulation of schooling-returns to skills. Estimation is performed using instrumental-variable techniques, and both functional forms are confronted using a Box-Cox test, since human capital inputs enter in levels in the mincerian specification and in logs in the extended neoclassical growth model.

Testing production functions used in empirical growth studies

We estimate and test two alternative functional forms representing the aggregate production function for a panel of countries: the extended neoclassical growth model, and a mincerian formulation of schooling-returns to skills. Estimation is performed using instrumentalvariable techniques, and both functional forms are confronted using a Box-Cox test, since human capital inputs enter in levels in the mincerian specification and in logs in the extended neoclassical growth model. Our evidence rejects the extended neoclassical growth model in favor of the mincerian specification, with an estimated capital share of about 42%, a marginal return to education of about 7.5% per year, and an estimated productivity growth of about 1.4% per year. Differences in productivity cannot be disregarded as an explanation of why output per worker varies so much across countries: a variance decomposition exercise shows that productivity alone explains 54% of the variation in output per worker across countries.

Fabrication of microenvironments with different geometrical features for cell growth studies

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Validation of age determination methods and growth studies of the sand sole Pegusa lascaris (Soleidae) from the eastern-central Atlantic

[EN]The age and growth of the sand sole Pegusa lascaris from the Canarian Archipelago were studied from 2107 fish collected between January 2005 and December 2007. To find an appropriate method for age determination, sagittal otoliths were observed by surface-reading and frontal section and the results were compared. The two methods did not differ significantly in estimated age but the surface-reading method is superior in terms of cost and time efficiency. The sand sole has a moderate life span, with ages up to 10 years recorded. Individuals grow quickly in their first two years, attaining approximately 48% of their maximum standard length; after the second year, their growth rate drops rapidly as energy is diverted to reproduction. Males and females show dimorphism in growth, with females reaching a slightly greater length and age than males. Von Bertalanffy, seasonalized von Bertalanfy, Gompertz, and Schnute growth models were fitted to length-at-age data. Akaike weights for the seasonalized von Bertalanffy growth model indicated that the probability of choosing the correct model from the group of models used was >0.999 for males and females. The seasonalized von Bertalanffy growth parameters estimated were: L? = 309 mm standard length, k = 0.166 yr?1, t0 = ?1.88 yr, C = 0.347, and ts = 0.578 for males; and L? = 318 mm standard length, k = 0.164 yr?1, t0 = ?1.653 yr, C = 0.820, and ts = 0.691 for females. Fish standard length and otolith radius are closely correlated (R2 = 0.902). The relation between standard length and otolith radius is described by a power function (a = 85.11, v = 0.906)

Volume and growth studies of trees near Ithaca, with a detailed study of the Meade woodlot, cut in 1921-22.

Thesis (M. F.) - Cornell Unv., 1922.