Enel green power: Equity research

UNL - NSBE

Effectiveness of reactive power capability of photo voltaic inverters to maintain voltage profile in a residential distribution feeder

Large penetration of rooftop PVs has resulted in unacceptable voltage profile in many residential distribution feeders. Limiting real power injection from PVs to alleviate over voltage problem is not feasible due to loss of green power and hence corresponding revenue loss. Reactive capability of the PV inverter can be a solution to address over voltage and voltage dip problems to some extent. This paper proposes an algorithm to utilize reactive capability of PV inverters and investigate their effectiveness for voltage improvement based on R/X ratio of the feeder. The length and loading level of the feeder for a particular R/X ratio to have acceptable voltage profile is also investigated. This can be useful for suburban design and residential distribution planning. Furthermore, coordination among different PVs using residential smart meters via a substation based controller is also proposed.

Some of the design considerations in power generation from offshore wind farms

The global efforts to reduce carbon emissions from power generation have favoured renewable energy resources such as wind and solar in recent years. The generation of power from the renewable energy resources has become attractive because of various incentives provided by government policies supporting green power. Among the various available renewable energy resources, the power generation from wind has seen tremendous growth in the last decade. This article discusses various advantages of the upcoming offshore wind technology and associated considerations related to their construction. The conventional configuration of the offshore wind farm is based on the alternative current internal links. With the recent advances of improved commercialised converters, voltage source converters based high voltage direct current link for offshore wind farms is gaining popularity. The planning and construction phases of offshore wind farms, including related environmental issues, are discussed here.

Preventing industrial scale using bauxite refinery residues

An Australian green power (AGP) company produces energy from burning biomass from the sugar industry and recycled wood waste, however alkali in biomass is released into a recirculating stream that forms a scale as it becomes more concentrated. This investigation has shown that the addition of Bayer liquor (alumina waste residue) successfully removes scale-forming species from the recirculating stream and thus has the potential to reduce the rate of scaling. Characterisation of the scale and Bayer precipitates has been performed using X-ray diffraction (XRD), infrared spectroscopy (IR) and inductively coupled plasma optical emission spectroscopy (ICP-OES).

Vector Evaluated Particle Swarm Optimization (VEPSO) of Supersonic Ejector for Hydrogen Fuel Cells

Fuel cells are emerging as alternate green power producers for both large power production and for use in automobiles. Hydrogen is seen as the best option as a fuel; however, hydrogen fuel cells require recirculation of unspent hydrogen. A supersonic ejector is an apt device for recirculation in the operating regimes of a hydrogen fuel cell. Optimal ejectors have to be designed to achieve best performances. The use of the vector evaluated particle swarm optimization technique to optimize supersonic ejectors with a focus on its application for hydrogen recirculation in fuel cells is presented here. Two parameters, compression ratio and efficiency, have been identified as the objective functions to be optimized. Their relation to operating and design parameters of ejector is obtained by control volume based analysis using a constant area mixing approximation. The independent parameters considered are the area ratio and the exit Mach number of the nozzle. The optimization is carried out at a particularentrainment ratio and results in a set of nondominated solutions, the Pareto front. A set of such curves can be used for choosing the optimal design parameters of the ejector.

Reação de híbridos de brócolis 'tipo cabeça única' à podridão negra

Conduziu-se simultaneamente dois experimentos, em casa de vegetação, com o objetivo de avaliar a resistência de híbridos de brócolis 'tipo cabeça única' (AF 649, Titleist, Centenário, Green Power, BR068, Magestic Crown, Marathon, Laguna, Legacy, Green Parasol, Packman e Mônaco) à podridão negra, causada por Xanthomonas campestris pv. campestris. Foram utilizados os métodos de inoculação no ápice das folhas por cortes com tesoura embebida na suspensão bacteriana e por ferimento provocado no caule com palito de dente umedecido na suspensão bacteriana. A inoculação foi realizada aos 25 dias após transplante (6 a 8 folhas definitivas). Avaliou-se no experimento de inoculação com tesoura, as áreas abaixo da curva de progresso da doença nas folhas inoculadas. No experimento de inoculação por palito de dente, avaliou-se a proporção de altura necrosada do caule, aos 26 dias após inoculação. Verificou-se que, em ambos os experimentos, o híbrido BRO68 apresentou-se mais suscetível à podridão negra e os híbridos Marathon, Legacy e Green Power foram os que apresentaram os maiores níveis de resistência à podridão negra.

Il ruolo del consulente: il trasferimento di conoscenza come fattore abilitante

L’obiettivo della seguente tesi è quello di illustrare le condizioni in cui avviene il trasferimento di conoscenza da consulente a cliente, e come questo sia il fattore abilitante per l’esistenza e l’utilizzo di tale figura professionale da parte delle organizzazioni. Questa tesi nasce dall’esperienza vissuta durante la partecipazione alla XXIV edizione di Junior Consulting, un programma organizzato da CONSEL - ELIS presso Roma, che ha permesso al sottoscritto di prendere parte al progetto di consulenza “Engineering & Construction - Performance Monitoring System” commissionato da Enel Green Power. L’esigenza manifestata dall’azienda era quella di riuscire ad avere una visione chiara e definita della qualità delle attività svolte dalla funzione Engineering & Construction (E&C) e quindi l’obiettivo del progetto si è concretizzato nella definizione di un set di KPI idoneo a rappresentare una misura delle performance della suddetta funzione. Avendo testato, seppure per pochi mesi, l’attività consulenziale, il candidato ha compiuto uno studio teorico che andasse ad analizzare in dettaglio l’attività del consulente, la sua importanza nel mondo economico, il contesto in cui opera e i principali dibattiti accademici di cui è protagonista negli ultimi anni. Nell’elaborato viene analizzato il caso pratico sulla base degli studi della letteratura, con lo scopo di formulare un modello che descriva l’approccio che il consulente dovrebbe avere, durante lo svolgimento delle sue attività, per la realizzazione del trasferimento di conoscenza. Nel primo capitolo è riportato uno studio relativo all’importanza e agli effetti che le società di consulenza hanno avuto nell’ultimo secolo ed in particolare negli ultimi 30 anni. Nel secondo capitolo è descritto il core asset delle società di consulenza, ovvero la conoscenza, e come questa è strutturata e gestita. Nel terzo capitolo sono analizzate le principali teorie sviluppate sulla figura del consulente, sia l’evoluzione storica che le principali posizioni ancora oggi oggetto di dibattito. Nel quarto capitolo l’attenzione è focalizzata sul trasferimento di conoscenza da consulente a cliente e sulle condizioni in cui questo può avvenire. Nel quinto capitolo è presentato il progetto sopracitato, i cui risultati sono riportati negli allegati 1 e 2. Infine, nel sesto capitolo, è presentato un modello di approccio del consulente ottenuto dall’analisi critica del caso pratico sulla base delle evidenze emerse dallo studio della letteratura.

Kihívások és lehetőségek a hazai megújuló energiaszektorban (Challenges and possibilities in the Hungarian renewable sector)

A megújuló energiatermelés szerepének erősödését figyelhetjük meg az utóbbi években, évtizedekben. A zöldenergiák iránti igényt három fő motivátorcsoporttal lehet indokolni: ellátásbiztonság növelése, környezetvédelem és gazdaságélénkítés. Ezek a szempontok együttesen a fenntartható fejlődést szolgálják, és egyre inkább előtérbe kerülnek mind az EU, mind pedig hazánk szintjén. Magyarország 2010 végén az EU által előírt, 2020-ra elérendő 13%-os megújuló energiaarányt meghaladó, 14,65%-os vállalást tett a Nemzeti Cselekvési Tervben, ezzel is kifejezve elköteleződését a zöldenergiák ösztönzése felé. A jelenlegi kapacitások több mint megkétszerezését igénylő cél a hazai megújuló energiaszektor számára érdemi lehetőségeket jelent, de ezek megvalósításához szükség lenne az ígért új zöldenergia-támogatási rendszer, mielőbbi életbe lépésére. ____ The role of the renewable energy generation is getting even bigger and bigger in the last years, decades. The demand for the green energy has three main motivators: energy security, protecting the environment and fostering innovation. These goals serve the conception of sustainable development, and their function is increasingly highlighted in the EU and in Hungary as well. The EU has prescribed Hungary to reach a 13% share of renewable energy sources in 2020, but in the Hungarian national renewable action plan we have aimed to top the EU request, and to reach a 14,65% in the renewable proportion. This shows that our country is committed to inspire the renewables. In order to reach this goal, Hungary has to more than double its green power plant capacity, which means great possibilities in the sector; but at the same time means challenges as well, because the new renewable promoting system needs to come into force as soon as possible.

Synsättet på förnyelsebara elkällor inom fastighetsbranschen

För mellan 40-50 år sedan så byggdes en miljon bostäder i Sverige. Idag har arbetet påbörjats med att renovera och restorera dessa bostäder, i samband med dessa åtgärder så görs även många åtgärder för att minska energianvändningen. Syftet med detta arbete var att ta reda på vad som var det mest ekonomiska valet av olika gröna elkällor. Även fastighetsägarnas egna tankar och uppfattningar ställs i relation till slutsatserna vid beräkningarna för att få en uppfattning om det stämmer överens. För att arbetet inte skulle bli för stort och krävande så gjordes dessa avgränsningar:  För att tiden skulle räcka till så avgränsades arbetet till Dalaregionen.  Arbetet har dessutom avgränsats till att bara undersöka ekonomin vid valet av de olika gröna elkällorna. Genom två olika undersökningar med mentometerknappar så kunde resultatet om fastighetsägarnas egna tankar och uppfattningar redovisas och analyseras. Vidare kunde fastighetsägarnas tankar och uppfattningar jämföras med beräkningarna och dessa slutsatser kunde då dras: Slutsatser:  Vindkraft var ej lönsam med dagens elpriser.  Av fastighetsbolag kunde det ses att deltagarna trodde olika på vad som gav bäst lönsamhet mellan vindkraft, solel eller grön el.

Emerging Issues in Green Criminology : Exploring Power, Justice and Harm

This edited collection brings together internationally recognized scholars to explore Green Criminology through interdisciplinary lenses of power, justice and harm. The chapters provide innovative case study analyses from North America, Europe and Australia that seek to advance theoretical, policy and practice discourses about environmental harm. This book brings together transnational debates in environmental law, policy and justice. In doing so, it examines international agreements and policy within diverse environmental discourses of sociology, criminology and political economy.

Power-optimal scheduling for a green base station with delay constraints

We consider a power optimization problem with average delay constraint on the downlink of a Green Base-station. A Green Base-station is powered by both renewable energy such as solar or wind energy as well as conventional sources like diesel generators or the power grid. We try to minimize the energy drawn from conventional energy sources and utilize the harvested energy to the maximum extent. Each user also has an average delay constraint for its data. The optimal action consists of scheduling the users and allocating the optimal transmission rate for the chosen user. In this paper, we formulate the problem as a Markov Decision Problem and show the existence of a stationary average-cost optimal policy. We also derive some structural results for the optimal policy.

Does lean imply green?: a study of the power performance implications of Java runtime bloat

The presence of software bloat in large flexible software systems can hurt energy efficiency. However, identifying and mitigating bloat is fairly effort intensive. To enable such efforts to be directed where there is a substantial potential for energy savings, we investigate the impact of bloat on power consumption under different situations. We conduct the first systematic experimental study of the joint power-performance implications of bloat across a range of hardware and software configurations on modern server platforms. The study employs controlled experiments to expose different effects of a common type of Java runtime bloat, excess temporary objects, in the context of the SPECPower_ssj2008 workload. We introduce the notion of equi-performance power reduction to characterize the impact, in addition to peak power comparisons. The results show a wide variation in energy savings from bloat reduction across these configurations. Energy efficiency benefits at peak performance tend to be most pronounced when bloat affects a performance bottleneck and non-bloated resources have low energy-proportionality. Equi-performance power savings are highest when bloated resources have a high degree of energy proportionality. We develop an analytical model that establishes a general relation between resource pressure caused by bloat and its energy efficiency impact under different conditions of resource bottlenecks and energy proportionality. Applying the model to different "what-if" scenarios, we predict the impact of bloat reduction and corroborate these predictions with empirical observations. Our work shows that the prevalent software-only view of bloat is inadequate for assessing its power-performance impact and instead provides a full systems approach for reasoning about its implications.