Background effects in the induced polarization method of geophysical exploration : annual progress report for 1956-57 /

"June 28, 1957."

Geochemical exploration in the Montseny Mountains (NE Spain)

A five year program of systematic multi-element geochemical exploration of the Catalonian Coastal Ranges has been initiated by the Geological Survey of Autonomic Government of Catalonia (Generalitat de Catalunya) and the Department of Geological and Geophysical Exploration (University of Barcelona). This paper reports the first stage results of this regional survey, covering an area of 530 km2 in the Montseny Mountains, NE of Barcelona (Spain). Stream sediments for metals and stream waters for fluoride were chosen because of the regional characteristics. Four target areas for future tactic survey were recognized after the prospect. The most important is a 40 km* zone in the Canoves-Vilamajor area, with high base metal values accompanied by Cd, Ni, Co, As and Sb anomalies. Keywords: Catalanides. Geochemical exploration. Stream sediments. Base metal anomalies. Principal Component Analysis.

Integrated Geophysical Investigation of the St. James Fault Complex: A Case Study

We noninvasively detected the characteristics and location of a regional fault in an area of poor bedrock exposure complicated by karst weathering features in the subsurface. Because this regional fault is associated with sinkhole formation, its location is important for hazard avoidance. The bedrock lithologies on either side of the fault trace are similar; hence, we chose an approach that capitalized on the complementary strengths of very low frequency (VLF) electromagnetic, resistivity, and gravity methods. VLF proved most useful as a first-order reconnaissance tool, allowing us to define a narrow target area for further geophysical exploration. Fault-related epikarst was delineated using resistivity. Ultimately, a high-resolution gravity survey and subsequent inverse modeling using the results of the resistivity survey helped to further constrain the location and approximate orientation of the fault. The combined results indicated that the location of the fault trace needed to be adjusted 53 m south of the current published location and was consistent with a north-dipping thrust fault. Additionally, a gravity low south of the fault trace agreed with the location of conductive material from the resistivity and VLF surveys. We interpreted these anomalies to represent enhanced epikarst in the fault footwall. We clearly found that a staged approach involving a progression of methods beginning with a reconnaissance VLF survey, followed by high-resolution gravity and electrical resistivity surveys, can be used to characterize a fault and fault-related karst in an area of poor bedrock surface exposure.

Análise comparativa de métodos de prospeção direta e indireta na determinação do topo rochoso para fundações

Com o decorrer dos tempos e com a evolução da indústria, acresce a necessidade de aparecimento de novas construções e consequentemente de novos desafios geotécnicos. Para responder a estes novos reptos que a construção nos lança é necessário aprofundar o conhecimento acerca dos materiais que constituem o subsolo e estudar o seu comportamento quando sujeito a novas solicitações, como por exemplo sobrecargas, pois parte do cálculo de dimensionamento de fundações das novas construções dependerá destas características. Existem duas possíveis formas de identificar os materiais existentes no subsolo e caracterizá‐los: através de ensaios de laboratório e de ensaios in situ, sendo nestes últimos que nos iremos focar. Os ensaios in situ, para além de outros dados, permitem‐nos estimar com algum grau de incerteza a profundidade a que se encontra o horizonte com capacidade de suporte pretendida, quer se trate ou não do bedrock, e identificar o processo mais indicado para a retirada do material: através de um meio mecânico de escavação ou por recurso a explosivos. Com a realização de ensaios de sísmica de refração e igualmente recorrendo a ensaios executados com o penetrómetro dinâmico médio (DPM), tentamos dar resposta a estas incógnitas através do cruzamento dos dados obtidos. No entanto, este cruzamento de dados pode não ser completamente esclarecedor, levando ao aparecimento de novas incógnitas às quais não seja possível dar resposta recorrendo‐se unicamente à informação recolhida por meio destes dois métodos, pois poderão revelar‐se insuficientes. Contudo, existem muitos outros ensaios in situ que podem ser realizados e capazes de nos ajudar a complementar os dados inicialmente obtidos no sentido de diminuir ou até mesmo eliminar as incógnitas existentes, e desta forma poder identificar e caraterizar o material existente com o maior grau de segurança possível.

Modelización Gravimétrica 3D del diapiro de Cardona, Cuenca del Ebro (NE de España)

En este trabajo se presentan los resultados derivados de la interpretacón de 320 estaciones gravimétricas realizadas sobre el diapiro de Cardona con el objetivo de obtener información sobre su geometría tridimensional. Para obtener una distribución tridimensional de la masa salina que explique las anomalías observadas se ha aplicado un método iterativo de ajustes sucesivos basado en un algoritmo de inversión automática. Esta metodología ha mostrado ser muy rápida, fácil de usar y con suficiente poder de resolución para perfilar no sólo la geometría del cuerpo salino, sino también la de estructuras similares. El diapiro salino de Cardona presenta un mínimo gravimétrico relacionado con el anticlinal de Pins-Cardona que se prolonga hacia el SW. El análisis cualitativo de la anomalía residual permite apreciar que el diapiro muestra una cierta vergencia hacia sur con un flanco sureste subvertical y un flanco noroeste con pendientes más suaves.

Textural controls on induced polarization and permeability in granular media

The spatial resolution visualized with hydrological models and the conceptualized images of subsurface hydrological processes often exceed resolution of the data collected with classical instrumentation at the field scale. In recent years it was possible to increasingly diminish the inherent gap to information from point like field data through the application of hydrogeophysical methods at field-scale. With regards to all common geophysical exploration techniques, electric and electromagnetic methods have arguably to greatest sensitivity to hydrologically relevant parameters. Of particular interest in this context are induced polarisation (IP) measurements, which essentially constrain the capacity of a probed subsurface region to store an electrical charge. In the absence of metallic conductors the IP- response is largely driven by current conduction along the grain surfaces. This offers the perspective to link such measurements to the characteristics of the solid-fluid-interface and thus, at least in unconsolidated sediments, should allow for first-order estimates of the permeability structure.¦While the IP-effect is well explored through laboratory experiments and in part verified through field data for clay-rich environments, the applicability of IP-based characterizations to clay-poor aquifers is not clear. For example, polarization mechanisms like membrane polarization are not applicable in the rather wide pore-systems of clay free sands, and the direct transposition of Schwarz' theory relating polarization of spheres to the relaxation mechanism of polarized cells to complex natural sediments yields ambiguous results.¦In order to improve our understanding of the structural origins of IP-signals in such environments as well as their correlation with pertinent hydrological parameters, various laboratory measurements have been conducted. We consider saturated quartz samples with a grain size spectrum varying from fine sand to fine gravel, that is grain diameters between 0,09 and 5,6 mm, as well as corresponding pertinent mixtures which can be regarded as proxies for widespread alluvial deposits. The pore space characteristics are altered by changing (i) the grain size spectra, (ii) the degree of compaction, and (iii) the level of sorting. We then examined how these changes affect the SIP response, the hydraulic conductivity, and the specific surface area of the considered samples, while keeping any electrochemical variability during the measurements as small as possible. The results do not follow simple assumptions on relationships to single parameters such as grain size. It was found that the complexity of natural occurring media is not yet sufficiently represented when modelling IP. At the same time simple correlation to permeability was found to be strong and consistent. Hence, adaptations with the aim of better representing the geo-structure of natural porous media were applied to the simplified model space used in Schwarz' IP-effect-theory. The resulting semi- empiric relationship was found to more accurately predict the IP-effect and its relation to the parameters grain size and permeability. If combined with recent findings about the effect of pore fluid electrochemistry together with advanced complex resistivity tomography, these results will allow us to picture diverse aspects of the subsurface with relative certainty. Within the framework of single measurement campaigns, hydrologiste can than collect data with information about the geo-structure and geo-chemistry of the subsurface. However, additional research efforts will be necessary to further improve the understanding of the physical origins of IP-effect and minimize the potential for false interpretations.¦-¦Dans l'étude des processus et caractéristiques hydrologiques des subsurfaces, la résolution spatiale donnée par les modèles hydrologiques dépasse souvent la résolution des données du terrain récoltées avec des méthodes classiques d'hydrologie. Récemment il est possible de réduire de plus en plus cet divergence spatiale entre modèles numériques et données du terrain par l'utilisation de méthodes géophysiques, notamment celles géoélectriques. Parmi les méthodes électriques, la polarisation provoquée (PP) permet de représenter la capacité des roches poreuses et des sols à stocker une charge électrique. En l'absence des métaux dans le sous-sol, cet effet est largement influencé par des caractéristiques de surface des matériaux. En conséquence les mesures PP offrent une information des interfaces entre solides et fluides dans les matériaux poreux que nous pouvons lier à la perméabilité également dirigée par ces mêmes paramètres. L'effet de la polarisation provoquée à été étudié dans différentes études de laboratoire, ainsi que sur le terrain. A cause d'une faible capacité de polarisation des matériaux sableux, comparé aux argiles, leur caractérisation par l'effet-PP reste difficile a interpréter d'une manière cohérente pour les environnements hétérogènes.¦Pour améliorer les connaissances sur l'importance de la structure du sous-sol sableux envers l'effet PP et des paramètres hydrologiques, nous avons fait des mesures de laboratoire variées. En détail, nous avons considéré des échantillons sableux de quartz avec des distributions de taille de grain entre sables fins et graviers fins, en diamètre cela fait entre 0,09 et 5,6 mm. Les caractéristiques de l'espace poreux sont changées en modifiant (i) la distribution de taille des grains, (ii) le degré de compaction, et (iii) le niveau d'hétérogénéité dans la distribution de taille de grains. En suite nous étudions comment ces changements influencent l'effet-PP, la perméabilité et la surface spécifique des échantillons. Les paramètres électrochimiques sont gardés à un minimum pendant les mesures. Les résultats ne montrent pas de relation simple entre les paramètres pétro-physiques comme par exemples la taille des grains. La complexité des media naturels n'est pas encore suffisamment représenté par les modèles des processus PP. Néanmoins, la simple corrélation entre effet PP et perméabilité est fort et consistant. En conséquence la théorie de Schwarz sur l'effet-PP a été adapté de manière semi-empirique pour mieux pouvoir estimer la relation entre les résultats de l'effet-PP et les paramètres taille de graines et perméabilité. Nos résultats concernant l'influence de la texture des matériaux et celles de l'effet de l'électrochimie des fluides dans les pores, permettront de visualiser des divers aspects du sous-sol. Avec des telles mesures géo-électriques, les hydrologues peuvent collectionner des données contenant des informations sur la structure et la chimie des fluides des sous-sols. Néanmoins, plus de recherches sur les origines physiques de l'effet-PP sont nécessaires afin de minimiser le risque potentiel d'une mauvaise interprétation des données.

Prospección gravimétrica en el sistema transversal catalán

En el presente trabajo se plantea la elaboración e interpretación del mapa de anomalas de Bouguer del Sistema Transversal Catalán. La característica más destacada del mapa es el marcado dominio de la tendencia regional, producida por el aumento de grosor de la corteza terrestre hacia el NW. La sustracción de este efecto regional se ha realizado utilizando el método de ajuste a superficies polinómicas por mínimos cuadrados. La interpretacin cuantitativa del mapa de anomalas residuales obtenido refleja la estructura en bloques del basamento.

Architectural characterization of a delta-front reservoir analogue combining ground penetrating radar and electrical resistivity tomography: Roda Sandstone (Lower Eocene, Graus-Tremp basin, Spain)

Three-dimensional reconstruction of reservoir analogues can be improved combining data from different geophysical methods. Ground Penetrating Radar (GPR) and Electrical Resistivity Tomography (ERT) data are valuable tools, since they provide subsurface information from internal architecture and facies distribution of sedimentary rock bodies, enabling the upgrading of depositional models and heterogeneity reconstruction. The Lower Eocene Roda Sandstone is a well-known deltaic complex widely studied as a reservoir analogue that displays a series of sandstone wedges with a general NE to SW progradational trend. To provide a better understanding of internal heterogeneity of a 10m-thick progradational delta-front sandstone unit, 3D GPR data were acquired. In addition, common midpoints (CMP) to measure the sandstone subsoil velocity, test profiles with different frequency antennas (25, 50 and 100MHz) and topographic data for subsequent correction in the geophysical data were also obtained. Three ERT profiles were also acquired to further constrain GPR analysis. These geophysical results illustrate the geometry of reservoir analogue heterogeneities both depositional and diagenetic in nature, improving and complementing previous outcrop-derived data. GPR interpretation using radar stratigraphy principles and attributes analysis provided: 1)tridimensional geometry of major stratigraphic surfaces that define four units in the GPR Prism, 2) image the internal architecture of the units and their statistical study of azimuth and dips, useful for a quick determination of paleocurrent directions. These results were used to define the depositional architecture of the progradational sandbody that shows an arrangement in very-high-frequency sequences characterized by clockwise paleocurrent variations and decrease of the sedimentary flow, similar to those observed at a greater scale in the same system. This high-frequency sequential arrangement has been attributed to the autocyclic dynamics of a supply-dominated delta- front where fluvial and tidal currents are in competition. The resistivity models enhanced the viewing of reservoir quality associated with cement distribution caused by depositional and early diagenetic processes related to the development of transgressive and regressive systems tracts in igh-frequency sequences.

Geofísica ambiental: técnicas no destructivas para el reconocimiento de zonas contaminadas por vertidos

Los países industrializados afrontan ahora las consecuencias de varias décadas de gestión inadecuada de sus residuos tóxicos y peligrosos. En las últimas décadas el volumen de residuos generados ha aumentado en progresión geométrica provocando un riesgo toxicológico para el hombre a través de su interacción con el medio fisico. El vertido incontrolado de todo tipo de residuos ha sido una práctica creciente en muchas localidades. Importantes volUmenes de residuos industriales y de otros tipos (urbanos, agncolas, etc.) han sido enterrados en vertederos, muchos de los cuales carecen de las barreras geológicas naturales o artificiles, y los fluidos tóxicos que se producen por lixiviación pueden migrar hacia el exterior y contaminar las aguas subterráneas. El problema se agrava cuando una vez colmatado el vertedero se cubre de tierra y se pierde la información relativa a las prácticas de vertido practicadas en el pasado.

Resultados preliminares en la caracterización geométrica 3D de un litosoma arenoso de progradación deltaica mediante Georadar (GPR) (Fm. Arenisca de Roda, Eoceno, Cuenca de Graus-Tremp).

A set of GPR profiles have been recorded in order to determine the 3D geometry of a prograding delta-front sandbody (Roda sandstone formation, Eocene, Graus-Tremp basin). Common Mid Points (CMP) also have been recorded to obtain the velocity of the electromagnetic wave in ground. In order to build the topsurface of a 3D prism a set of topographic points have been acquired. Most of the GPR profiles are oriented parallel to the progradation direction (NNE-SSW) and show the expected geometries. The 3D prism has been built from the individual profiles, which shows the three dimensional geometry of the sandy lithosome.

Análise da resolução do modelo de Hughes em sondagens magnetotelúricas

Na maioria dos métodos de exploração geofísica, a interpretação é feita assumindo-se um modelo da Terra uniformemente estratificado. Todos os métodos de inversão, inclusive o de dados eletromagnéticos, exigem técnica de modelamento teórico de modo a auxiliar a interpretação. Na literatura os dados são geralmente interpretados em termos de uma estrutura condutiva unidimensional; comumente a Terra é assumida ser horizontalmente uniforme de modo que a condutividade é função somente da profundidade. Neste trabalho uma técnica semi-analítica de modelagem desenvolvida por Hughes (1973) foi usada para modelar a resposta magnética de duas camadas na qual a interface separando as camadas pode ser representada por uma expansão em série de Fourier. A técnica envolve um método de perturbação para encontrar o efeito de um contorno senoidal com pequenas ondulações. Como a perturbação é de primeira ordem a solução obtida é linear, podemos então usar o princípio da superposição e combinar soluções para várias senoides de forma a obter a solução para qualquer dupla camada expandida em série de Fourier. Da comparação com a técnica de elementos finitos, as seguintes conclusões podem ser tiradas: • Para um modelo de dupla camada da Terra, as camadas separadas por uma interface cuja profundidade varia senoidalmente em uma direção, as respostas eletromagnética são muito mais fortes quando a espessura da primeira camada é da ordem do skin depth da onda eletromagnética no meio, e será tanto maior quanto maior for o contraste de condutividade entre as camadas; • Por outro lado, a resistividade aparente para este modelo não é afetada pela mudança na frequência espacial (v) do contorno; • Em caso do uso da solução geral para qualquer dupla camada na Terra cuja interface possa ser desenvolvida em série de Fourier, esta técnica produziu bons resultados quando comparado com a técnica de elementos finitos. A linerização restringe a aplicação da técnica para pequenas estruturas, apesar disso, uma grande quantidade de estruturas pode ser modelada de modo simples e com tempo computacional bastante rápido; • Quando a dimensão da primeira camada possui a mesma ordem de grandeza da estrutura, esta técnica não é recomendada, porque para algumas posições de sondagem, as curvas de resistividade aparente obtidas mostram um pequeno deslocamento quando comparadas com as curvas obtidas por elementos finitos.

Interfaces gráficas de entrada e saída da eGs (electrical GEOPHYSICS suite)

Apresentamos uma interface gráfica para o programa eGs (electrical GEOPHYSICS suíte) usado na modelagem e interpretação de dados elétricos e eletromagnéticos na exploração geofísica. Esta dissertação corresponde a parcela do programa que trata das interfaces de entrada de dados de modelos geoelétricos bi e tridimensionais e das interfaces de apresentação dos resultados da modelagem como também dos dados observados. O programa contém interfaces para criação, modificação e visualização de modelos geoelétricos bi e tridimensionais, e para apresentação da resposta do modelo através de gráficos e imagens. Este trabalho resultou num programa com diversas opções para alterar a geometria e as propriedades físicas do modelo geoelétricos e recursos de visualização para facilitar a interpretação de dados geofísicos. A interface gráfica pode ser usada para criar modelos geoelétricos dos métodos elétrico ou eletromagnético mais usados e analisar as respostas dos modelos e de dados observados em campanha de campo. O programa é suficientemente flexível de modo que novas interfaces gráficas de outros métodos elétricos e eletromagnéticos podem ser facilmente implementadas.

Magnetic susceptibility and electric conductivity of marine surficial sediments by benthic electromagnetic profiling

Distribution, accumulation and diagenesis of surficial sediments in coastal and continental shelf systems follow complex chains of localized processes and form deposits of great spatial variability. Given the environmental and economic relevance of ocean margins, there is growing need for innovative geophysical exploration methods to characterize seafloor sediments by more than acoustic properties. A newly conceptualized benthic profiling and data processing approach based on controlled source electromagnetic (CSEM) imaging permits to coevally quantify the magnetic susceptibility and the electric conductivity of shallow marine deposits. The two physical properties differ fundamentally insofar as magnetic susceptibility mostly assesses solid particle characteristics such as terrigenous or iron mineral content, redox state and contamination level, while electric conductivity primarily relates to the fluid-filled pore space and detects salinity, porosity and grain-size variations. We develop and validate a layered half-space inversion algorithm for submarine multifrequency CSEM with concentric sensor configuration. Guided by results of modeling, we modified a commercial land CSEM sensor for submarine application, which was mounted into a nonconductive and nonmagnetic bottom-towed sled. This benthic EM profiler Neridis II achieves 25 soundings/second at 3-4 knots over continuous profiles of up to hundred kilometers. Magnetic susceptibility is determined from the 75 Hz in-phase response (90% signal originates from the top 50 cm), while electric conductivity is derived from the 5 kHz out-of-phase (quadrature) component (90% signal from the top 92 cm). Exemplary survey data from the north-west Iberian margin underline the excellent sensitivity, functionality and robustness of the system in littoral (~0-50 m) and neritic (~50-300 m) environments. Susceptibility vs. porosity cross-plots successfully identify known lithofacies units and their transitions. All presently available data indicate an eminent potential of CSEM profiling for assessing the complex distribution of shallow marine surficial sediments and for revealing climatic, hydrodynamic, diagenetic and anthropogenic factors governing their formation.

Gridded bathymetry from multibeam echosounder EM122 data of the cruise MSM35

The aim of Maria S. MERIAN voyage MSM35 was to conduct marine controlled source electromagnetic (CSEM) measurements in the Danube Delta, Black Sea, to identify suitable gas hydrate deposits for a future MEBO drilling test site for methane production and CO2 sequestration in hydrate form. Marine CSEM is a geophysical exploration method to derive the electrical properties, i.e. resistivity of the seafloor. Gas hydrates and free gas are electrically insulating and replace conductive pore fluid.

El análogo natural de almacenamiento y escape de Co2 de la cuenca de Gañuelas-Mazarrón : implicaciones para el comportamiento y la seguridad de un almacenamiento de Co2 en estaso supercrítico

El aumento de la temperatura media de la Tierra durante el pasado siglo en casi 1 ºC; la subida del nivel medio del mar; la disminución del volumen de hielo y nieve terrestres; la fuerte variabilidad del clima y los episodios climáticos extremos que se vienen sucediendo durante las ultimas décadas; y el aumento de las epidemias y enfermedades infecciosas son solo algunas de las evidencias del cambio climático actual, causado, principalmente, por la acumulación de gases de efecto invernadero en la atmósfera por actividades antropogénicas. La problemática y preocupación creciente surgida a raíz de estos fenómenos, motivo que, en 1997, se adoptara el denominado “Protocolo de Kyoto” (Japón), por el que los países firmantes adoptaron diferentes medidas destinadas a controlar y reducir las emisiones de los citados gases. Entre estas medidas cabe destacar las tecnologías CAC, enfocadas a la captura, transporte y almacenamiento de CO2. En este contexto se aprobó, en octubre de 2008, el Proyecto Singular Estratégico “Tecnologías avanzadas de generación, captura y almacenamiento de CO2” (PSE-120000-2008-6), cofinanciado por el Ministerio de Ciencia e Innovación y el FEDER, el cual abordaba, en su Subproyecto “Almacenamiento Geológico de CO2” (PSS-120000-2008-31), el estudio detallado, entre otros, del Análogo Natural de Almacenamiento y Escape de CO2 de la cuenca de Ganuelas-Mazarrón (Murcia). Es precisamente en el marco de dicho Proyecto en el que se ha realizado este trabajo, cuyo objetivo final ha sido el de predecir el comportamiento y evaluar la seguridad, a corto, medio y largo plazo, de un Almacenamiento Geológico Profundo de CO2 (AGP-CO2), mediante el estudio integral del citado análogo natural. Este estudio ha comprendido: i) la contextualización geológica e hidrogeológica de la cuenca, así como la investigación geofísica de la misma; ii) la toma de muestras de aguas de algunos acuíferos seleccionados con el fin de realizar su estudio hidrogeoquímico e isotópico; iii) la caracterización mineralógica, petrográfica, geoquímica e isotópica de los travertinos precipitados a partir de las aguas de algunos de los sondeos de la cuenca; y iv) la medida y caracterización química e isotópica de los gases libres y disueltos detectados en la cuenca, con especial atención al CO2 y 222Rn. Esta información, desarrollada en capítulos independientes, ha permitido realizar un modelo conceptual de funcionamiento del sistema natural que constituye la cuenca de Ganuelas-Mazarrón, así como establecer las analogías entre este y un AGP-CO2, con posibles escapes naturales y/o antropogénicos. La aplicación de toda esta información ha servido, por un lado, para predecir el comportamiento y evaluar la seguridad, a corto, medio y largo plazo, de un AGP-CO2 y, por otro, proponer una metodología general aplicable al estudio de posibles emplazamientos de AGP-CO2 desde la perspectiva de los reservorios naturales de CO2. Los resultados más importantes indican que la cuenca de Ganuelas-Mazarrón se trata de una cubeta o fosa tectónica delimitada por fallas normales, con importantes saltos verticales, que hunden al substrato rocoso (Complejo Nevado-Filabride), y rellenas, generalmente, por materiales volcánicos-subvolcánicos ácidos. Además, esta cuenca se encuentra rellena por formaciones menos resistivas que son, de muro a techo, las margas miocenas, predominantes y casi exclusivas de la cuenca, y los conglomerados y gravas pliocuaternarias. El acuífero salino profundo y enriquecido en CO2, puesto de manifiesto por la xx exploración geotérmica realizada en dicha cuenca durante la década de los 80 y objeto principal de este estudio, se encuentra a techo de los materiales del Complejo Nevado-Filabride, a una profundidad que podría superar los 800 m, según los datos de la investigación mediante sondeos y geofísica. Por ello, no se descarta la posibilidad de que el CO2 se encuentre en estado supe critico, por lo que la citada cuenca reuniría las características principales de un almacenamiento geológico natural y profundo de CO2, o análogo natural de un AGP-CO2 en un acuífero salino profundo. La sobreexplotación de los acuíferos mas someros de la cuenca, con fines agrícolas, origino, por el descenso de sus niveles piezométricos y de la presión hidrostática, el ascenso de las aguas profundas, salinas y enriquecidas en CO2, las cuales son las responsables de la contaminación de dichos acuíferos. El estudio hidrogeoquímico de las aguas de los acuíferos investigados muestra una gran variedad de hidrofacies, incluso en aquellos de litología similar. La alta salinidad de estas aguas las hace inservibles tanto para el consumo humano como para fines agrícolas. Además, el carácter ligeramente ácido de la mayoría de estas aguas determina que tengan gran capacidad para disolver y transportar, hacia la superficie, elementos pesados y/o tóxicos, entre los que destaca el U, elemento abundante en las rocas volcánicas ácidas de la cuenca, con contenidos de hasta 14 ppm, y en forma de uraninita submicroscópica. El estudio isotópico ha permitido discernir el origen, entre otros, del C del DIC de las aguas (δ13C-DIC), explicándose como una mezcla de dos componentes principales: uno, procedente de la descomposición térmica de las calizas y mármoles del substrato y, otro, de origen edáfico, sin descartar una aportación menor de C de origen mantélico. El estudio de los travertinos que se están formando a la salida de las aguas de algunos sondeos, por la desgasificación rápida de CO2 y el consiguiente aumento de pH, ha permitido destacar este fenómeno, por analogía, como alerta de escapes de CO2 desde un AGP-CO2. El análisis de los gases disueltos y libres, con especial atención al CO2 y al 222Rn asociado, indican que el C del CO2, tanto disuelto como en fase libre, tiene un origen similar al del DIC, confirmándose la menor contribución de CO2 de origen mantélico, dada la relación R/Ra del He existente en estos gases. El 222Rn sería el generado por el decaimiento radiactivo del U, particularmente abundante en las rocas volcánicas de la cuenca, y/o por el 226Ra procedente del U o del existente en los yesos mesinienses de la cuenca. Además, el CO2 actúa como carrier del 222Rn, hecho evidenciado en las anomalías positivas de ambos gases a ~ 1 m de profundidad y relacionadas principalmente con perturbaciones naturales (fallas y contactos) y antropogénicas (sondeos). La signatura isotópica del C a partir del DIC, de los carbonatos (travertinos), y del CO2 disuelto y libre, sugiere que esta señal puede usarse como un excelente trazador de los escapes de CO2 desde un AGPCO2, en el cual se inyectara un CO2 procedente, generalmente, de la combustión de combustibles fósiles, con un δ13C(V-PDB) de ~ -30 ‰. Estos resultados han permitido construir un modelo conceptual de funcionamiento del sistema natural de la cuenca de Ganuelas-Mazarrón como análogo natural de un AGP-CO2, y establecer las relaciones entre ambos. Así, las analogías mas importantes, en cuanto a los elementos del sistema, serian la existencia de: i) un acuífero salino profundo enriquecido en CO2, que seria análoga a la formación almacén de un AGPxxi CO2; ii) una formación sedimentaria margosa que, con una potencia superior a 500 m, se correspondería con la formación sello de un AGP-CO2; y iii) acuíferos mas someros con aguas dulces y aptas para el consumo humano, rocas volcánicas ricas en U y fallas que se encuentran selladas por yesos y/o margas; elementos que también podrían concurrir en un emplazamiento de un AGP-CO2. Por otro lado, los procesos análogos mas importantes identificados serian: i) la inyección ascendente del CO2, que seria análoga a la inyección de CO2 de origen antropogénico, pero este con una signatura isotópica δ13C(V-PDB) de ~ -30 ‰; ii) la disolución de CO2 y 222Rn en las aguas del acuífero profundo, lo que seria análogo a la disolución de dichos gases en la formación almacén de un AGP-CO2; iii) la contaminación de los acuíferos mas someros por el ascenso de las aguas sobresaturadas en CO2, proceso que seria análogo a la contaminación que se produciría en los acuíferos existentes por encima de un AGP-CO2, siempre que este se perturbara natural (reactivación de fallas) o artificialmente (sondeos); iv) la desgasificación (CO2 y gases asociados, entre los que destaca el 222Rn) del acuífero salino profundo a través de sondeos, proceso análogo al que pudiera ocurrir en un AGP-CO2 perturbado; y v) la formación rápida de travertinos, proceso análogo indicativo de que el AGP-CO2 ha perdido su estanqueidad. La identificación de las analogías más importantes ha permitido, además, analizar y evaluar, de manera aproximada, el comportamiento y la seguridad, a corto, medio y largo plazo, de un AGP-CO2 emplazado en un contexto geológico similar al sistema natural estudiado. Para ello se ha seguido la metodología basada en el análisis e identificación de los FEPs (Features, Events and Processes), los cuales se han combinado entre sí para generar y analizar diferentes escenarios de evolución del sistema (scenario analysis). Estos escenarios de evolución identificados en el sistema natural perturbado, relacionados con la perforación de sondeos, sobreexplotación de acuíferos, precipitación rápida de travertinos, etc., serian análogos a los que podrían ocurrir en un AGP-CO2 que también fuera perturbado antropogénicamente, por lo que resulta totalmente necesario evitar la perturbación artificial de la formación sello del AGPCO2. Por último, con toda la información obtenida se ha propuesto una metodología de estudio que pueda aplicarse al estudio de posibles emplazamientos de un AGP-CO2 desde la perspectiva de los reservorios naturales de CO2, sean estancos o no. Esta metodología comprende varias fases de estudio, que comprendería la caracterización geológico-estructural del sitio y de sus componentes (agua, roca y gases), la identificación de las analogías entre un sistema natural de almacenamiento de CO2 y un modelo conceptual de un AGP-CO2, y el establecimiento de las implicaciones para el comportamiento y la seguridad de un AGP-CO2. ABSTRACT The accumulation of the anthropogenic greenhouse gases in the atmosphere is the main responsible for: i) the increase in the average temperature of the Earth over the past century by almost 1 °C; ii) the rise in the mean sea level; iii) the drop of the ice volume and terrestrial snow; iv) the strong climate variability and extreme weather events that have been happening over the last decades; and v) the spread of epidemics and infectious diseases. All of these events are just some of the evidence of current climate change. The problems and growing concern related to these phenomena, prompted the adoption of the so-called "Kyoto Protocol" (Japan) in 1997, in which the signatory countries established different measurements to control and reduce the emissions of the greenhouse gases. These measurements include the CCS technologies, focused on the capture, transport and storage of CO2. Within this context, it was approved, in October 2008, the Strategic Singular Project "Tecnologías avanzadas de generación, captura y almacenamiento de CO2" (PSE-120000-2008-6), supported by the Ministry of Science and Innovation and the FEDER funds. This Project, by means of the Subproject "Geological Storage of CO2" (PSS- 120000-2008-31), was focused on the detailed study of the Natural Analogue of CO2 Storage and Leakage located in the Ganuelas-Mazarron Tertiary basin (Murcia), among other Spanish Natural Analogues. This research work has been performed in the framework of this Subproject, being its final objective to predict the behaviour and evaluate the safety, at short, medium and long-term, of a CO2 Deep Geological Storage (CO2-DGS) by means of a comprehensive study of the abovementioned Natural Analogue. This study comprises: i) the geological and hydrogeological context of the basin and its geophysical research; ii) the water sampling of the selected aquifers to establish their hydrogeochemical and isotopic features; iii) the mineralogical, petrographic, geochemical and isotopic characterisation of the travertines formed from upwelling groundwater of several hydrogeological and geothermal wells; and iv) the measurement of the free and dissolved gases detected in the basin, as well as their chemical and isotopic characterisation, mainly regarding CO2 and 222Rn. This information, summarised in separate chapters in the text, has enabled to build a conceptual model of the studied natural system and to establish the analogies between both the studied natural system and a CO2-DGS, with possible natural and/or anthropogenic escapes. All this information has served, firstly, to predict the behaviour and to evaluate the safety, at short, medium and long-term, of a CO2-DGS and, secondly, to propose a general methodology to study suitable sites for a CO2-DGS, taking into account the lessons learned from this CO2 natural reservoir. The main results indicate that the Ganuelas-Mazarron basin is a graben bounded by normal faults with significant vertical movements, which move down the metamorphic substrate (Nevado-Filabride Complex), and filled with acid volcanic-subvolcanic rocks. Furthermore, this basin is filled with two sedimentary formations: i) the Miocene marls, which are predominant and almost exclusive in the basin; xxiv and ii) the Plio-Quaternary conglomerates and gravels. A deep saline CO2-rich aquifer was evidenced in this basin as a result of the geothermal exploration wells performed during the 80s, located just at the top of the Nevado-Filabride Complex and at a depth that could exceed 800 m, according to the geophysical exploration performed. This saline CO2-rich aquifer is precisely the main object of this study. Therefore, it is not discarded the possibility that the CO2 in this aquifer be in supercritical state. Consequently, the aforementioned basin gathers the main characteristics of a natural and deep CO2 geological storage, or natural analogue of a CO2-DGS in a deep saline aquifer. The overexploitation of the shallow aquifers in this basin for agriculture purposes caused the drop of the groundwater levels and hydrostatic pressures, and, as a result, the ascent of the deep saline and CO2-rich groundwater, which is the responsible for the contamination of the shallow and fresh aquifers. The hydrogeochemical features of groundwater from the investigated aquifers show the presence of very different hydrofacies, even in those with similar lithology. The high salinity of this groundwater prevents the human and agricultural uses. In addition, the slightly acidic character of most of these waters determines their capacity to dissolve and transport towards the surface heavy and/or toxic elements, among which U is highlighted. This element is abundant in the acidic volcanic rocks of the basin, with concentrations up to 14 ppm, mainly as sub-microscopic uraninite crystals. The isotopic study of this groundwater, particularly the isotopic signature of C from DIC (δ13C-DIC), suggests that dissolved C can be explained considering a mixture of C from two main different sources: i) from the thermal decomposition of limestones and marbles forming the substrate; and ii) from edaphic origin. However, a minor contribution of C from mantle degassing cannot be discarded. The study of travertines being formed from upwelling groundwater of several hydrogeological and geothermal wells, as a result of the fast CO2 degassing and the pH increase, has allowed highlighting this phenomenon, by analogy, as an alert for the CO2 leakages from a CO2-DGS. The analysis of the dissolved and free gases, with special attention to CO2 and 222Rn, indicates that the C from the dissolved and free CO2 has a similar origin to that of the DIC. The R/Ra ratio of He corroborates the minor contribution of CO2 from the mantle degassing. Furthermore, 222Rn is generated by the radioactive decay of U, particularly abundant in the volcanic rocks of the basin, and/or by 226Ra from the U or from the Messinian gypsum in the basin. Moreover, CO2 acts as a carrier of the 222Rn, a fact evidenced by the positive anomalies of both gases at ~ 1 m depth and mainly related to natural (faults and contacts) and anthropogenic (wells) perturbations. The isotopic signature of C from DIC, carbonates (travertines), and dissolved and free CO2, suggests that this parameter can be used as an excellent tracer of CO2 escapes from a CO2-DGS, in which CO2 usually from the combustion of fossil fuels, with δ13C(V-PDB) of ~ -30 ‰, will be injected. All of these results have allowed to build a conceptual model of the behaviour of the natural system studied as a natural analogue of a CO2-DGS, as well as to establish the relationships between both natural xxv and artificial systems. Thus, the most important analogies, regarding the elements of the system, would be the presence of: i) a deep saline CO2-rich aquifer, which would be analogous to the storage formation of a CO2-DGS; ii) a marly sedimentary formation with a thickness greater than 500 m, which would correspond to the sealing formation of a CO2-DGS; and iii) shallow aquifers with fresh waters suitable for human consumption, U-rich volcanic rocks, and faults that are sealed by gypsums and/or marls; geological elements that could also be present in a CO2-DGS. On the other hand, the most important analogous processes identified are: i) the upward injection of CO2, which would be analogous to the downward injection of the anthropogenic CO2, this last with a δ13C(V-PDB) of ~ -30 ‰; ii) the dissolution of CO2 and 222Rn in groundwater of the deep aquifer, which would be analogous to the dissolution of these gases in the storage formation of a CO2-DGS; iii) the contamination of the shallow aquifers by the uprising of CO2-oversaturated groundwater, an analogous process to the contamination that would occur in shallow aquifers located above a CO2-DGS, whenever it was naturally (reactivation of faults) or artificially (wells) perturbed; iv) the degassing (CO2 and associated gases, among which 222Rn is remarkable) of the deep saline aquifer through wells, process which could be similar in a perturbed CO2- DGS; v) the rapid formation of travertines, indicating that the CO2-DGS has lost its seal capacity. The identification of the most important analogies has also allowed analysing and evaluating, approximately, the behaviour and safety in the short, medium and long term, of a CO2-DGS hosted in a similar geological context of the natural system studied. For that, it has been followed the methodology based on the analysis and identification of FEPs (Features, Events and Processes) that have been combined together in order to generate and analyse different scenarios of the system evolution (scenario analysis). These identified scenarios in the perturbed natural system, related to boreholes, overexploitation of aquifers, rapid precipitation of travertines, etc., would be similar to those that might occur in a CO2-DGS anthropogenically perturbed, so that it is absolutely necessary to avoid the artificial perturbation of the seal formation of a CO2-DGS. Finally, a useful methodology for the study of possible sites for a CO2-DGS is suggested based on the information obtained from this investigation, taking into account the lessons learned from this CO2 natural reservoir. This methodology comprises several phases of study, including the geological and structural characterisation of the site and its components (water, rock and gases), the identification of the analogies between a CO2 storage natural system and a conceptual model of a CO2-DGS, and the implications regarding the behaviour and safety of a CO2-DGS.