中药青蒿萜类代谢物谱分析及青蒿素生物合成的研究

青蒿素是从中药青蒿，学名黄花蒿（Artemisia annua L.）植物地上部分分离出的抗疟疾有效单体，为一种倍半萜内酯类化合物，其生物合成途径属于植物类异戊二烯代谢途径。青蒿素生物合成途径及其调控机制仍不完全清楚，本论文采用GC-MS 和GC×GC-TOFMS 方法对青蒿萜类代谢物谱进行检测，用多维统计学方法对检测结果进行整理和比较分析，研究青蒿素生物合成及其与青蒿中其他萜类代谢的关系，取得了以下结果： 一、通过GC×GC-TOFMS 方法对青蒿挥发油成分进行分析，共鉴定出303 种组分。其中挥发油中相对百分含量大于1%的10 种组分中有9 种为萜类化合物，含量接近总挥发油的50%。在相对百分含量大于0.1%的49 种成分中，有30 种萜类化合物。有27 种相对百分含量大于0.1%的成分首次在青蒿挥发油中报道，其中包括10 种萜类化合物。 二、利用GC-MS 方法分析了青蒿001 和SP18 两个青蒿素高产株系不同生长时期萜类代谢物谱，结果表明：青蒿中萜类化合物在不同时期合成和积累是动态变化的，萜类化合物的种类和数量在营养生长期随生长时间的延长而提高，在营养生长后期和现蕾前期达到最高水平，进入生殖生长后随生长时间的延长而迅速降低。通过多维统计PLS-DA（Partial Leasted Square Discriminant Analysis） 分析，确定001 中有17 个化合物的含量在不同生长时期有明显变化，其中15 个为萜类化合物。SP18 中有18 个化合物的含量在不同生长时期有明显变化，其中16 个为萜类化合物。青蒿素，青蒿酸，二氢青蒿酸，青蒿素B 都是含量变化明显的标记物。其中青蒿酸和二氢青蒿酸含量在营养生长后期达到最高水平，进入生殖生长后迅速下降，而青蒿素和青蒿素B 在整个检测时期含量变化相对较小，在营养生长时期含量已经较高，在现蕾前期含量稍有上升，进入现蕾期后有所下降，本研究确定现蕾前期为代谢物谱分析最佳取样时期，并为药材采收提供指导。 三、不同基因型青蒿代谢物谱研究表明，青蒿素高产株系SP18 和001 代谢物表现出一定的差异，通过多维统计PLS-DA 分析，共找出了22 种在两种基因型中差异明显的化合物，其中包括倍半萜化合物12 种，单萜化合物3 种，三萜化合物4 种。SP18 特征化合物为樟脑和两个未鉴定倍半萜化合物，而001 特征化合物是龙脑和β-法呢烯。另外两种基因型中青蒿素及相关前体化合物的积累模式差异明显，SP18 中二氢青蒿酸和青蒿素含量高，而青蒿酸和青蒿素B 含量极低；001 中二氢青蒿酸和青蒿素含量相对SP18 要低，但青蒿素B 和青蒿酸含量比SP18 要高。该结果表明在青蒿素高产株系中，青蒿素含量与二氢青蒿酸的含量呈正相关，结合Brown 等的活体标记研究结果分析，从二氢青蒿酸到青蒿素的转化可能是青蒿素合成的限速步骤。 四、利用GC×GC-TOFMS 方法对转基因青蒿萜类代谢物谱进行了分析，共对200 个左右化合物峰进行PLS-DA 和OSC-PLS (Orthogonal Signal Correction–Partial leasted Square)多维统计分析，结果表明：青蒿萜类代谢物谱在外源基因转入后发生显著变化，与对照株系相比均呈现显著差异。其中过量表达Amorpha-4,11-diene 合酶基因（ads）株系中青蒿素及相关化合物变化最明显，而过量表达FPP 合酶基因（fps）株系中青蒿素及相关化合物变化相对较小，在受到调控而成为差异标记物的化合物中，70%是倍半萜类化合物。 五、考察了外源茉莉酸甲酯对青蒿素生物合成的影响，结果表明：300 μM 外源茉莉酸甲酯能提高青蒿素含量，在处理后第8 天青蒿素含量提高38%。青蒿萜类代谢物谱研究表明，茉莉酸甲酯不仅可以诱导青蒿中青蒿素的合成，还能诱导很多化合物，特别是倍半萜和三萜类的合成。OSC-PLS 分析结果找出了9 个处理后含量明显提高的标记物，其中6 个倍半萜化合物，3 个三萜化合物。标记物鲨烯含量提高了67%，另一个未鉴定出结构的倍半萜提高了60%，这些化合物可能与青蒿素有着类似的调控机制，而外源喷洒茉莉酸甲酯可以作为提高青蒿素产量的有效途径之一。

Catalytic routes to convert saccharides to furanic aldehydes

The conversion of plant biomass-derived carbohydrates (preferably non-edible) into added-value products is envisaged to be at the core of the future biorefineries. Carbohydrates are the most abundant natural organic polymers on Earth. This work deals with the chemical valorisation of plant biomass, focusing on the acid-catalysed conversion of carbohydrates (mono and polysaccharides) to furanic aldehydes, namely 2-furaldehyde (Fur) and 5-hydroxymethyl-2-furaldehyde (Hmf), which are valuable platform chemicals that have the potential to replace a variety of oil derived chemicals and materials. The investigated reaction systems can be divided into two types depending on the solvent used to dissolve the carbohydrates in the reaction medium: water or ionic liquid-based systems. The reaction temperatures were greater than 150 ºC when the solvent was water, and lower than 150 º C in the cases of the ionic liquid-based catalytic systems. As alternatives to liquid acids (typically used in the industrial production of Fur), solid acid catalysts were investigated in these reaction systems. Aiming at the identification of (soluble and insoluble) reaction products, complementary characterisation techniques were used namely, FT-IR spectroscopy, liquid and solid state NMR spectroscopy, TGA, DSC and GC´GC-ToFMS analyses. Complex mixtures of soluble reaction products were obtained and different types of side reactions may occur. The requirements to be put on the catalysts for these reaction systems partly depend on the type of carbohydrates to be converted and the reaction conditions used. The thermal stability is important due to the fact that formation of humins and catalyst coking phenomena are characteristically inherent to these types of reactions systems leading to the need to regenerate the catalyst which can be effectively accomplished by calcination. Special attention was given to fully inorganic nanoporous solid acids, amorphous or crystalline, and consisting of nano to micro-size particles. The investigated catalysts were silicoaluminophosphates, aluminosilicates and zirconium-tungsten mixed oxides which are versatile catalysts in that their physicochemical properties can be fine-tuned to improve the catalytic performances in the conversion of different substrates (e.g. introduction of mesoporosity and modification of the acid properties). The catalytic systems consisting of aluminosilicates as solid acids and water as solvent seem to be more effective in converting pentoses and related polysaccharides into Fur, than hexoses and related polysaccharides into Hmf. The investigated solid acids exhibited fairly good hydrothermal stabilities. On the other hand, ionic liquid-based catalytic systems can allow reaching simultaneously high Fur and Hmf yields, particularly when Hmf is obtained from D-fructose and related polysaccharides; however, catalyst deactivation occurs and the catalytic reactions take place in homogeneous phase. As pointed out in a review of the state of the art on this topic, the development of truly heterogeneous ionic liquid-based catalytic systems for producing Fur and Hmf in high yields remains a challenge.

Organic geochemistry of sediments from sapropel 94 of ODP Hole 161-974C

Analysis of the molecular composition of the organic matter (OM) from whole sediment samples can avoid analytical bias that might result from isolation of components from the sediment matrix, but has its own analytical challenges. We evaluated the use of GC * GC-ToFMS to analyze the pyrolysis products of six whole sediment samples obtained from above, within and below a 1 million year old OM-rich Mediterranean sapropel layer. We found differences in pyrolysis products

Drug Analysis without Primary Reference Standards : Application of LC-TOFMS and LC-CLND to Biofluids and Seized Material

Drug Analysis without Primary Reference Standards: Application of LC-TOFMS and LC-CLND to Biofluids and Seized Material Primary reference standards for new drugs, metabolites, designer drugs or rare substances may not be obtainable within a reasonable period of time or their availability may also be hindered by extensive administrative requirements. Standards are usually costly and may have a limited shelf life. Finally, many compounds are not available commercially and sometimes not at all. A new approach within forensic and clinical drug analysis involves substance identification based on accurate mass measurement by liquid chromatography coupled with time-of-flight mass spectrometry (LC-TOFMS) and quantification by LC coupled with chemiluminescence nitrogen detection (LC-CLND) possessing equimolar response to nitrogen. Formula-based identification relies on the fact that the accurate mass of an ion from a chemical compound corresponds to the elemental composition of that compound. Single-calibrant nitrogen based quantification is feasible with a nitrogen-specific detector since approximately 90% of drugs contain nitrogen. A method was developed for toxicological drug screening in 1 ml urine samples by LC-TOFMS. A large target database of exact monoisotopic masses was constructed, representing the elemental formulae of reference drugs and their metabolites. Identification was based on matching the sample component s measured parameters with those in the database, including accurate mass and retention time, if available. In addition, an algorithm for isotopic pattern match (SigmaFit) was applied. Differences in ion abundance in urine extracts did not affect the mass accuracy or the SigmaFit values. For routine screening practice, a mass tolerance of 10 ppm and a SigmaFit tolerance of 0.03 were established. Seized street drug samples were analysed instantly by LC-TOFMS and LC-CLND, using a dilute and shoot approach. In the quantitative analysis of amphetamine, heroin and cocaine findings, the mean relative difference between the results of LC-CLND and the reference methods was only 11%. In blood specimens, liquid-liquid extraction recoveries for basic lipophilic drugs were first established and the validity of the generic extraction recovery-corrected single-calibrant LC-CLND was then verified with proficiency test samples. The mean accuracy was 24% and 17% for plasma and whole blood samples, respectively, all results falling within the confidence range of the reference concentrations. Further, metabolic ratios for the opioid drug tramadol were determined in a pharmacogenetic study setting. Extraction recovery estimation, based on model compounds with similar physicochemical characteristics, produced clinically feasible results without reference standards.

HPLC与MALDI-TOFMS联用技术分析蛋黄中的磷脂

蛋黄中含有大量磷脂,其中磷脂酰胆碱(PC)和磷脂酰乙醇胺(PE)最为丰富。本研究采用高效液相色谱法(HPLC)与基质辅助激光解吸电离飞行时间质谱(MALDI-TOF MS)联用技术分析了蛋黄中磷脂粗提物。将从蛋黄中提取的多种磷脂通过HPLC预先分离,收集各组分后分别进行MALDI-TOF MS分析得到比较清晰的质谱图。通过质谱图解析确定了蛋黄中磷脂酰胆碱、神经鞘磷脂(SM)的脂肪酸组成。

在线纯化技术应用于MALDI-TOFMS测定溶菌酶的分子量

在用基质辅助激光解吸电离飞行时间质谱(MALDI-TOFMS)测定蛋白质分子量的过程中,一些盐和蛋白质变性剂经常大大抑制样品信号,产生一些难以解析的离子峰,因此测试前应尽可能去除样品中的添加剂。为此,本研究建立了MALDI—TOFMS测试中在线纯化蛋白质样品的新方法。采用硝酸纤维素膜作为固相载体,将标准蛋白质溶菌酶制成含6 mol/L盐酸胍变性剂、2％SDS表面活性剂的100 mmol/L Tris—HCL溶液进行质谱测定。结果表明:新方法简单、快速,可明显增强离子峰的强度,提高测定蛋白质分子量的灵敏度。

UPLC-ESI-TOFMS-based metabolomics and gene expression dynamics inspector self-organizing metabolomic maps as tools for understanding the cellular response to ionizing radiation

Global transcriptomic and proteomic profiling platforms have yielded important insights into the complex response to ionizing radiation (IR). Nonetheless, little is known about the ways in which small cellular metabolite concentrations change in response to IR. Here, a metabolomics approach using ultraperformance liquid chromatography coupled with electrospray time-of-flight mass spectrometry was used to profile, over time, the hydrophilic metabolome of TK6 cells exposed to IR doses ranging from 0.5 to 8.0 Gy. Multivariate data analysis of the positive ions revealed dose- and time-dependent clustering of the irradiated cells and identified certain constituents of the water-soluble metabolome as being significantly depleted as early as 1 h after IR. Tandem mass spectrometry was used to confirm metabolite identity. Many of the depleted metabolites are associated with oxidative stress and DNA repair pathways. Included are reduced glutathione, adenosine monophosphate, nicotinamide adenine dinucleotide, and spermine. Similar measurements were performed with a transformed fibroblast cell line, BJ, and it was found that a subset of the identified TK6 metabolites were effective in IR dose discrimination. The GEDI (Gene Expression Dynamics Inspector) algorithm, which is based on self-organizing maps, was used to visualize dynamic global changes in the TK6 metabolome that resulted from IR. It revealed dose-dependent clustering of ions sharing the same trends in concentration change across radiation doses. "Radiation metabolomics," the application of metabolomic analysis to the field of radiobiology, promises to increase our understanding of cellular responses to stressors such as radiation.

Characterization of the volatile profile of Brazilian Merlot wines through comprehensive two dimensional gas chromatography time-of-flight mass spectrometric detection.

Wine aroma is an important characteristic and may be related to certain specific parameters, such as raw material and production process. The complexity of Merlot wine aroma was considered suitable for comprehensive two-dimensional gas chromatography (GCGC), as this technique offers superior performance when compared to one-dimensional gas chromatography (1D-GC). The profile of volatile compounds of Merlot wine was, for the first time, qualitatively analyzed by HS-SPME-GCxGC with a time-of-flight mass spectrometric detector (TOFMS), resulting in 179 compounds tentatively identified by comparison of experimental GCxGC retention indices and mass spectra with literature 1D-GC data and 155 compounds tentatively identified only by mass spectra comparison. A set of GCGC experimental retention indices was also, for the first time, presented for a specific inverse set of columns. Esters were present in higher number (94), followed by alcohols (80), ketones (29), acids (29), aldehydes (23), terpenes (23), lactones (16), furans (14), sulfur compounds (9), phenols (7), pyrroles (5), C13-norisoprenoids (3), and pyrans (2). GCxGC/TOFMS parameters were improved and optimal conditions were: a polar (polyethylene glycol)/medium polar (50% phenyl 50% dimethyl arylene siloxane) column set, oven temperature offset of 10ºC, 7 s as modulation period and 1.4 s of hot pulse duration. Co-elutions came up to 138 compounds in 1D and some of them were resolved in 2D. Among the coeluted compounds, thirty-three volatiles co-eluted in both 1D and 2D and their tentative identification was possible only due to spectral deconvolution. Some compounds that might have important contribution to aroma notes were included in these superimposed peaks. Structurally organized distribution of compounds in the 2D space was observed for esters, aldehydes and ketones, alcohols, thiols, lactones, acids and also inside subgroups, as occurred with esters and alcohols. The Fischer Ratio was useful for establishing the analytes responsible for the main differences between Merlot and non-Merlot wines. Differentiation among Merlot wines and wines of other grape varieties were mainly perceived through the following components: ethyl dodecanoate, 1-hexanol, ethyl nonanoate, ethyl hexanoate, ethyl decanoate, dehydro-2-methyl-3(2H)thiophenone, 3-methyl butanoic acid, ethyl tetradecanoate, methyl octanoate, 1,4 butanediol, and 6-methyloctan-1-ol.

Comprehensive Two-Dimensional Gas Chromatography: Instrumental and Methodological Development

Comprehensive two-dimensional gas chromatography (GC×GC) offers enhanced separation efficiency, reliability in qualitative and quantitative analysis, capability to detect low quantities, and information on the whole sample and its components. These features are essential in the analysis of complex samples, in which the number of compounds may be large or the analytes of interest are present at trace level. This study involved the development of instrumentation, data analysis programs and methodologies for GC×GC and their application in studies on qualitative and quantitative aspects of GC×GC analysis. Environmental samples were used as model samples. Instrumental development comprised the construction of three versions of a semi-rotating cryogenic modulator in which modulation was based on two-step cryogenic trapping with continuously flowing carbon dioxide as coolant. Two-step trapping was achieved by rotating the nozzle spraying the carbon dioxide with a motor. The fastest rotation and highest modulation frequency were achieved with a permanent magnetic motor, and modulation was most accurate when the motor was controlled with a microcontroller containing a quartz crystal. Heated wire resistors were unnecessary for the desorption step when liquid carbon dioxide was used as coolant. With use of the modulators developed in this study, the narrowest peaks were 75 ms at base. Three data analysis programs were developed allowing basic, comparison and identification operations. Basic operations enabled the visualisation of two-dimensional plots and the determination of retention times, peak heights and volumes. The overlaying feature in the comparison program allowed easy comparison of 2D plots. An automated identification procedure based on mass spectra and retention parameters allowed the qualitative analysis of data obtained by GC×GC and time-of-flight mass spectrometry. In the methodological development, sample preparation (extraction and clean-up) and GC×GC methods were developed for the analysis of atmospheric aerosol and sediment samples. Dynamic sonication assisted extraction was well suited for atmospheric aerosols collected on a filter. A clean-up procedure utilising normal phase liquid chromatography with ultra violet detection worked well in the removal of aliphatic hydrocarbons from a sediment extract. GC×GC with flame ionisation detection or quadrupole mass spectrometry provided good reliability in the qualitative analysis of target analytes. However, GC×GC with time-of-flight mass spectrometry was needed in the analysis of unknowns. The automated identification procedure that was developed was efficient in the analysis of large data files, but manual search and analyst knowledge are invaluable as well. Quantitative analysis was examined in terms of calibration procedures and the effect of matrix compounds on GC×GC separation. In addition to calibration in GC×GC with summed peak areas or peak volumes, simplified area calibration based on normal GC signal can be used to quantify compounds in samples analysed by GC×GC so long as certain qualitative and quantitative prerequisites are met. In a study of the effect of matrix compounds on GC×GC separation, it was shown that quality of the separation of PAHs is not significantly disturbed by the amount of matrix and quantitativeness suffers only slightly in the presence of matrix and when the amount of target compounds is low. The benefits of GC×GC in the analysis of complex samples easily overcome some minor drawbacks of the technique. The developed instrumentation and methodologies performed well for environmental samples, but they could also be applied for other complex samples.