Beam Search Algorithms for Minimizing Tool Switches on a Flexible Manufacturing System

In the minimization of tool switches problem we seek a sequence to process a set of jobs so that the number of tool switches required is minimized. In this work different variations of a heuristic based on partial ordered job sequences are implemented and evaluated. All variations adopt a depth first strategy of the enumeration tree. The computational test results indicate that good results can be obtained by a variation which keeps the best three branches at each node of the enumeration tree, and randomly choose, among all active nodes, the next node to branch when backtracking.

Flexible manufacturing field trial

Within the European project R-Fieldbus (http://www.hurray.isep.ipp.pt/activities/rfieldbus/), an industrial manufacturing field trial was developed. This field trial was conceived as a demonstration test bed for the technologies developed during the project. Because the R-Fieldbus field trial included prototype hardware devices, the purpose of this equipment changed and since the conclusion of the project, several new technologies also emerged, therefore an update of the field trial was required. This document describes an update of the manufacturing field trial. The purpose of this update, the changes and improvements introduced are described in the document. Additionally, this document also provides a reliable source of documentation for the equipment, configuration and software components of the manufacturing field trial.

An agent-based evolutionary approach for manufacturing system layout design

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

A flexible navigation system for autonomous robots operating in heterogeneous environments

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Implementing theLean Manufacturing System

Tuottavuuden ja tehokkuuden parantaminen on keskeisimpiä menestystekijöitä glo-baaleilla markkinoilla. Yksi kehittämisen toimintamalli on lean manufacturing -ajattelutapa, joka perustuu imuohjaukseen. Sen lähtökohtana on asiakasarvo ja keskit-tyminen arvoa lisäävien toimintojen maksimointiin. Tutkimuksen tavoitteena oli parantaa Strömfors Electric Oy:n materiaalivirtauksia yhdellä tuotantolinjalla. Projektin oli tarkoitus olla pilotti lean-implementointiin koko tehtaalla. Projektissa otettiin käyttöön kanban-imuohjausjärjestelmä, jota varten teh-tiin analyysejä ja laskelmia arvovirtoihin, varastoihin ja ohjaukseen. Lean-ajattelutapaan ja -työkaluihin perustuvaa kirjallisuutta käytettiin pohjatietona pilotti-projektissa sekätulevien kehitysprojektien suunnittelussa. Pilottiprojektin tuloksena materiaalinohjaus tehostui ja keskeneräisen tuotannon va-rasto tasoittui käyttötarpeen mukaiseksi. Työntekijät ja työnjohtajat tutustuivat leanin perusteisiin osallistuessaan pilottiprojektiin. Pidemmän aikavälin suunnitelmissa ontoimitusvarmuuden ja laadun parantuminen ensin pilottiprojektia koskevalla linjalla ja myöhemmin koko tehtaalla imuohjauksen kokonaisvaltaisen käyttöönoton myötä.

The role of nuclear and other conventional power plants in the flexible energy system

This thesis reviews the role of nuclear and conventional power plants in the future energy system. The review is done by utilizing freely accesible publications in addition to generating load duration and ramping curves for Nordic energy system. As the aim of the future energy system is to reduce GHG-emissions and avoid further global warming, the need for flexible power generation increases with the increased share of intermittent renewables. The goal of this thesis is to offer extensive understanding of possibilities and restrictions that nuclear power and conventional power plants have regarding flexible and sustainable generation. As a conclusion, nuclear power is the only technology that is able to provide large scale GHG-free power output variations with good ramping values. Most of the currently operating plants are able to take part in load following as the requirement to do so is already required to be included in the plant design. Load duration and ramping curves produced prove that nuclear power is able to cover most of the annual generation variation and ramping needs in the Nordic energy system. From the conventional power generation methods, only biomass combustion can be considered GHG-free because biomass is considered carbon neutral. CFB combusted biomass has good load follow capabilities in good ramping and turndown ratios. All the other conventional power generation technologies generate GHG-emissions and therefore the use of these technologies should be reduced.

A HOLISTIC APPROACH TO MANUFACTURING SYSTEM DESIGN IN THE DEFENSE AEROSPACE INDUSTRY

Manufacturing has evolved to become a critical element of the competitive skill set of defense aerospace firms. Given the changes in the acquisition environment and culture; traditional “thrown over the wall” means of developing and manufacturing products are insufficient. Also, manufacturing systems are complex systems that need to be carefully designed in a holistic manner and there are shortcomings with available tools and methods to assist in the design of these systems. This paper outlines the generation and validation of a framework to guide this manufacturing system design process.

A Holistic Approach to Manufacturing System Design in the Defense Aerospace Industry

Manufacturing has evolved to become a critical element of the competitive skill set of defense aerospace firms. Given the changes in the acquisition environment and culture; traditional “thrown over the wall” means of developing and manufacturing products are insufficient. Also, manufacturing systems are complex systems that need to be carefully designed in a holistic manner and there are shortcomings with available tools and methods to assist in the design of these systems. This paper outlines the generation and validation of a framework to guide this manufacturing system design process.

The Ergonomic Analysis and Back Injuries in Flexible Production System

Back injuries identification and diagnoses in the transition of the Taylor model to the flexiblemodel of production organization, demands a parallel intervention of prevention actors at work. This study uses simultaneously three intervention models (structured action analysis, muscle skeletal symptoms questionnaires and muscle skeletal assessment) for work activities in a packaging plant. In this study seventy and two (72) operative workers participated (28 workers with muscle skeletal evaluation). In an intervention period of 10 months, the physical, cognitive, organizational components and productive process dynamics were evaluated from the muscle skeletal demands issues. The differences established between objective exposure at risk, back injury risk perception, appreciation and a vertebral spine evaluation, in prior and post intervention, determines the structure for a muscle skeletal risk management system. This study explains that back injury symptoms can be more efficiently reduced among operative workers combining measures registered and the adjustment between dynamics, the changes at work and efficient gestures development. Relevance: the results of this study can be used to pre ent back injuries in workers of flexible production processes.

Towards intelligent manufacturing

This article describes the application of an Artificial Intelligence Planner in a robotized assembly cell that can be integrated to a Flexible Manufacturing System. The objective is to allow different products to be automatically assembled in a single production line with no pre-established assembly plans. The planner function is to generate action plans to the robot, in real time, from two input information: the initial state (disposition of parts of the product in line) and the final state (configuration of the assembled product). Copyright © 2007 IFAC.

An efficient methodological approach in the didatic of automation applied to integrated manufacturing

This work presents challenges and solutions for the teaching and learning of automation applied to integrated manufacturing by means of a methodological approach based on techniques, tools and industrial equipment directly applicable in the industry. The approach was implemented in a control and automation engineering course divided into expositive and laboratory classes. Since the success of the approach is mainly from the practical activities, the article focus more on activities developed in laboratory than theorical classes. Copyright © 2007 IFAC.

Lumped Element Modeling of a Flexible Manipulator System

This paper is concerned with a modeling method that can be used for an experimental identification of a dynamic system. More specifically, an equivalent lumped element system is presented to represent in a unique and exact manner a complete proportional-derivative (PD) controlled servo positioning system having a flexible manipulator. The impedance and mobility approach is used to transform the P and D control gains to an electrical spring and an electrical damper, respectively. The impedance model method is used to transform the flexible manipulator to a coupled system between a single contact mass at the driving position and a series of noncontact masses each of which is connected to the contact mass via a resilient member. This method is applicable whenever the driving point response of such a manipulator is available. Experimental work is presented to support the theory developed.