Council Bluffs Interstate System (I-29, I-80 and I-480) Final Environment Impact Statement, July, 2005

The Iowa Department of Transportation (Iowa DOT), Nebraska Department of Roads (NDOR), and the Federal Highway Administration (FHWA) are proposing improvements to the interstate system in the Omaha/Council Bluffs metropolitan area, extending across the Missouri River on Interstate 80 (I-80) to east of the Interstate 480 (I-480) interchange in Omaha, Nebraska (see Figure 1-1). The study considers long-term, broad-based transportation improvements along Interstate I-29 (I-29), I-80, and I-480, including approximately 18 mainline miles of interstate and 14 interchanges (3 system1, 11 service), that would add capacity and correct functional issues along the mainline and interchanges and upgrade the I-80 Missouri River Crossing. These improvements, once implemented, would bring the segments of I-80 and I-29 up to current engineering standards and modernize the roadway to accommodate future traffic needs.

Different lead sources in an abandoned uranium mine (Urgeirica - Central Portugal) and its environment impact - isotopic evidence

Different lead sources were identified in a large uranium tailings deposit (5Mton) in the Central Region of Portugal using lead isotopic ratios obtained by ICP-QMS. These ratios helped to clarify the different sources of Pb within the tailings deposit and the impact of the tailings on the surroundings. Ten depth profiles were used for isotopic characterization of the tailings deposit; the lead background signature was evaluated in seven regional rocks (granites) and was defined as being 28 +/- 1 mg kg(-1) for Pb bulk concentration and with isotopic ratios of 1.264(2) for Pb-206/Pb-207 and 1.962(7) for Pb-208/Pb-206. In order to understand Pb isotope distribution within the tailings deposit, simple mixing/mass balance models were used to fit experimental data, involving: (1) the background component; (2) uranium ores (pitchblende) characterized by the ratios Pb-206/Pb-207 of 1.914(3) and Pb-208/Pb-206 of 1.235(2); and (3) an unknown Pb source (named 'Fonte 5') characterized by the ratios Pb-206/Pb-207 of 3.079(7) and Pb-208/Pb-206 of 0.715(1). This unknown source showed high radiogenic ratios found in the water of some tailings depth profiles located in a very specific position in the dump. In terms of isotopic characterization, 69% of the deposit material resulted from the background source, 25% from uranium minerals and only 6% from other uranium mines in the region. Finally, the environment impact revealed that the pollution was focused only in the beginning of the stream and not in the surroundings, nor in the groundwater system. The lead in the water was found only in colloidal form with a clear pitchblende signature. Those data revealed possible remobilization phenomena along the bedside and margins of the watercourse.

Impact of dead and sunken water hyacinth on biotic communities, the aquatic environment and socioeconomic activities

The mobile water hyacinth, which was produced in growth zones, especially Murchison bay, was mainly exported to three sheltered storage bays (Thruston, Hannington and Waiya). Between 1996 and May 1998, the mobile form of water hyacinth occupied about 800 ha in Thruston bay, 750 ha in Hannington bay and 140 ha in Waiya bay). Biological control weevils and other factors, including localised nutrient depletion, weakened the weed that was confined to the bays and it sunk around October 1998. The settling to the bottom of such huge quantities of organic matter its subsequent decomposition and the debris from this mass was likely to have environmental impacts on biotic communities (e.g. fish and invertebrate), physico-chemical conditions (water quality), and on socio-economic activities (e.g. at fish landings, water abstraction, and hydro-power generation points). Sunken water hyacinth debris could also affect nutrient levels in the water column and lead to reduction in the content of dissolved oxygen. The changes in nutrient dynamics and oxygen levels could affect algal productivity, invertebrate composition and fish communities. Socio-economic impacts of dead sunken weed were expected from debris deposited along the shoreline especially at fish landings, water abstraction and hydropower generation points. Therefore, environmental impact assessment studies were carried out between 1998 and 2002 in selected representative zones of Lake Victoria to identify the effects of the sunken water hyacinth biomass.

Modern Metallic Materials for Arctic Environment

This thesis is part of the Arctic Materials Technologies Development –project, which aims to research and develop manufacturing techniques, especially welding, for Arctic areas. The main target of this paper is to clarify what kind of European metallic materials are used, or can be used, in Arctic. These materials include mainly carbon steels but also stainless steels and aluminium and its alloys. Standardized materials, their properties and also some recent developments are being introduced. Based on this thesis it can be said that carbon steels (shipbuilding and pipeline steels) have been developed based on needs of industry and steels exist, which can be used in Arctic areas. Still, these steels cannot be fully benefited, because rules and standards are under development. Also understanding of fracture behavior of new ultra high strength steels is not yet good enough, which means that research methods (destructive and non-destructive methods) need to be developed too. The most of new nickel-free austenitic and austenitic-ferritic stainless steels can be used in cold environment. Ferritic and martensitic stainless steels are being developed for better weldability and these steels are mainly developed in nuclear industry. Aluminium alloys are well suitable for subzero environment and these days high strength aluminium alloys are available also as thick sheets. Nanotechnology makes it possible to manufacture steels, stainless steels and aluminium alloys with even higher strength. Joining techniques needs to be developed and examined properly to achieve economical and safe way to join these modern alloys.

Environmental life cycle assessment of concrete made with fine recycled concrete aggregates

The majority of worldwide structures use concrete as its main material. This happens because concrete is economically feasible, due to its undemanding production technology and case Of use. However, it is widely recognized that concrete production has a strong environmental impact in the planet. Natural aggregates use is one of the most important problems of concrete production nowadays, since they are obtained from limited, and in some countries scarce, resources. In Portugal, although there are enough stone quarries to cover coarse aggregates needs for several more years, Supplies of fine aggregates are becoming scarcer, especially in the northern part of the country. On the other hand, as concrete structures' life cycle comes to an end, an urgent need emerges to establish technically and economically viable solutions for demolition debris, other than for use as road base and quarry fill. This paper presents a partial life cycle assessment (LCA) of concrete made with fine recycled concrete aggregates performed with EcoConcrete tool. EcoConcrete is a tailor-made, interactive, learning and communications tool promoted by the Joint Project Group (JPG) on the LCA of concrete, to qualify and quantify the overall environment impact of concrete products. It consists of an interactive Excel-spreadsheet in which several environmental inputs (material quantities, distances from origin to production Site, production processes) and outputs (material, energy, emissions to air, water, soil or waste) are collected in a life cycle inventory, and are then processed to determine the environmental impact (assessment) of the analysed concrete, in terms of ozone layer depletion, smog or "greenhouse" effect.

A avaliação de impacte ambiental em Portugal: análise exploratória às pedreiras da região Norte

Mestrado em Engenharia Geotécnica e Geoambiente

Early adversity, brain development and emotion processing in monozygotic twins

Il existe actuellement de nombreuses preuves démontrant que des facteurs génétiques et environnementaux interagissent pendant des périodes spécifiques du développement pour rendre une personne vulnérable aux troubles psychologiques via diverses adaptations physiologiques. Cette thèse porte sur l'impact de l’adversité prénatale (représentée par le petit poids à la naissance, PPN) et de l’adversité postnatale précoce (symptômes dépressifs maternels et comportements maternels négatifs), sur le développement du cerveau, particulièrement les régions fronto-limbiques impliquées dans le traitement des émotions, pendant l'enfance et l'adolescence. Des jumeaux monozygotes (MZ) sont utilisés, lorsque possible, afin de contrôler pour les effets génétiques. Les chapitres 1 et 2 présentent les résultats de la vérification de l'hypothèse que l’adversité prénatale et postnatale précoce sont associées à une altération du fonctionnement des régions fronto-limbique tels que l’amygdale, l’hippocampe, l’insula, le cortex cingulaire antérieur et le cortex préfrontal, en réponse à des stimuli émotifs chez des enfants et des adolescents. On observe que les symptômes dépressifs maternels sont associés à une activation plus élevée des régions fronto-limbiques des enfants en réponse à la tristesse. Les résultats de l’étude avec des adolescents suggèrent que le PPN, les symptômes dépressifs et les comportements maternels négatifs sont associés à une fonction altérée des régions fronto-limbiques en réponse à des stimuli émotionnels. Chez les jumeaux MZ on observe également que la discordance intra-paire de PPN et de certains comportements maternels est associée à une discordance intra-paire du fonctionnement du cerveau et que ces altérations diffèrent selon le sexe. Le chapitre 3 présente les résultats de la vérification de l'hypothèse que l’adversité prénatale et postnatale précoce sont associées à un volume total réduit du cerveau et de l’hypothèse que les comportements maternels peuvent servir de médiateur ou de modérateur de l'association entre le PPN et le volume du cerveau. Avec des jumeaux MZ à l’adolescence on observe a) que le PPN est effectivement associé à une diminution du volume total du cerveau et b) que la discordance intra-paire de PPN est associée à une discordance du volume du cerveau. En somme, cette thèse présente un ensemble de résultats qui soutiennent deux hypothèses importantes pour comprendre les effets de l’environnement sur le développement du cerveau : que l’environnement prénatal et postnatal précoce ont un impact sur le développement du cerveau indépendamment du code génétique et que les mécanismes impliqués peuvent différer entre les garçons et les filles. Finalement, l’ensemble de ces résultats sont discutés à la lumière des autres travaux de recherche dans ce domaine et des avenues à explorer pour de la recherche ultérieure sont proposées.

Ecological Footprint Analysis – An Overview

In the past, natural resources were plentiful and people were scarce. But the situation is rapidly reversing. According to the Living Planet Report 2006, during the last thirty years, consumption of natural resources has increased 40%, while Earth’s natural wealth in biodiversity has decreased 30%. Our challenge is to find a way to balance human consumption and nature’s limited productivity in order to ensure that our communities are sustainable locally, regionally and globally. Ecological Footprint Analysis (EFA) is physical accounting method, developed by William Rees and M. Wackernagel (1992), focusing on land appropriation using land as its “currency”. It provides a means for measuring and communicating human induced environmental impacts upon the planet. In this paper, an attempt is made to explore the tool Ecological Footprint Analysis. The paper also analyses the methods for calculating ecological footprint, scope of the tool as an impact assessment tool for India and measure for reducing the ecological footprint

Desenvolvimento sustentável e turismo: o caso lençóis maranheses

Tourism as an example of alternative for sustainable development in the Lençóis Maranhenses. The objective of this work is to analyze the prospects for sustainable development in tourism in the aforementioned region. An attempt is made to evaluate the five dimensions of sustainable - ecological, economic, social, space and cultural. The base for discussion is the information gathered from the people who actually live in the region. A type of the case study was built up. The research involved speaking with the people about the viability of tourism projects, not only with an eye on economic success, job creation and income for the region. There was also an attempt to tackle the issue of social and environment impact. Data was collected through verbal contact. A variety of people were interviewed, locals, businessmen, authorities, civil representatives and they spoke about the advantages and disadvantages of tourism as the saw it and as it affected them. Their answers and comments constitute the knowledge gleaned. The development of possible new strategies is the result of this work. Strategies that should be investigated by the local government/public administration. One such strategy would involve strengthening ties whit society and hoping that the improved dialogue would encourage sustainability. Another would mean improving interdepartmental contact to streamline the performance of public bodies so that development can be better planned and non-destructive.

Competências operacionais em redes de manufatura: uma análise sob a perspectiva coevolucionária

Esta tese tem como objetivo principal investigar como ocorre a disseminação de competências operacionais entre matriz e unidades fabris de redes de manufatura. Este objetivo principal se desdobra em cinco objetivos secundários: (i) Definir o conceito de competência operacional; (ii) Identificar os possíveis fatores que influenciam a disseminação de competências operacionais em rede de manufatura sob a ótica de seus atores; (iii) Identificar as possíveis inter-relações entre esses fatores que possam favorecer a disseminação de competências operacionais em uma rede de manufatura, sob a percepção dos atores; (iv) Investigar e analisar como as organizações interagem para promover o reforço ou a criação de competências operacionais entre suas diversas unidades, observando sua dinâmica e a interação entre os atores; (v) Analisar como a combinação entre fatores internos (nível micro) e fatores externos (do ambiente competitivo) influenciam e são influenciados por essa dinâmica. Para tanto, apresenta-se uma pesquisa qualitativa no campo de Estratégia de Operações baseada na Teoria da Coevolução, dividida em dois estudos. O primeiro estudo, de cunho exploratório, procura identifica os antecedentes da disseminação de competências. Através da condução de um focus group e posteriormente entrevistas semi-estruturadas com Executivos de Operações, foi possível elencar os principais fatores que influenciam o processo de disseminação de competências. O segundo trabalho é um estudo de casos múltiplos, conduzido com 4 redes de manufatura. Pode-se observar que a coevolução das unidades fabris e disseminação de competências é um processo gradativo, possui fatores motivacionais cumulativos, envolve atores de dimensões distintas e com velocidade de absorção distintos. A partir dos achados, foi possível identificar que a maturidade da construção de competências operacionais evolui ao passo do nível de maturidade que a manufatura se encontra.

Padronização e flexibilidade: proposta de um edifício tipo para uma escola técnica profissionalizante

Nowadays the acquisition of sustainable elements and concepts in construction has been increasingly discussed, improved and incorporated to buildings, since the sector directly interferes in the urban space and environment, representing environmental impact. In order to make a sustainable building (Green Building) it is vital to incorporate less damaging constructive practice, starting from the project until the operation of the enterprise, that means to consider an integrated process of conception, implementation, construction and operation. The more effective sustainable principles participation in architecture happens at the projecting step through minimal environment impact solutions. Among the issues varieties that goes with sustainability proposal of the buildings project, there were added to this work the elements that are directly attached to bioclimatic architecture, more specifically the climate variation, ventilation, lighting and sunlight, that directly affect the project conception. It is important to put in evidence that architecture role goes far beyond the simple activity of building spaces; it is the sequence of political, economic, social and cultural elements, having the users as the main apparatus to its materialization. Thereby this professional dissertation consists of an architecture draft for a professional and technological school in the Rio Grande do Norte State, this dissertation is based on the analysis of previous experience and the bioclimatic principles that implicate in building on hot and dry, hot and humid climates, and the use of strategic solutions that aim the optimization of natural light and ventilation