Optimization of the flow in the catalytic converter of internal combustion engines by means of screens

The flow in the automotive catalytic converter is, in general, not uniform. This significantly affects cost, service life, and performance, in particular, during cold startup. The current paper reports on a device that provided a large improvement in flow uniformity. The device is to be placed in the converter inlet diffuser and is constructed out of ordinary screens. It is cheap and easy to install. Moreover, the device does not present most of the undesired effects, such as increase in pressure drop and time to light off, often observed in other devices developed for the same purpose.

Impact of Commercial Search Engines and International Databases on Engineering Teaching and Research

For the last three decades, the engineering higher education and professional environments have been completely transformed by the "electronic/digital information revolution" that has included the introduction of personal computer, the development of email and world wide web, and broadband Internet connections at home. Herein the writer compares the performances of several digital tools with traditional library resources. While new specialised search engines and open access digital repositories may fill a gap between conventional search engines and traditional references, these should be not be confused with real libraries and international scientific databases that encompass textbooks and peer-reviewed scholarly works. An absence of listing in some Internet search listings, databases and repositories is not an indication of standing. Researchers, engineers and academics should remember these key differences in assessing the quality of bibliographic "research" based solely upon Internet searches.

Simple thermodynamics of jet engines

We use the first and second laws of thermodynamics to analyze the behavior of an ideal jet engine. Simple analytical expressions for the thermal efficiency, the overall efficiency, and the reduced thrust are derived. We show that the thermal efficiency depends only on the compression ratio r and on the velocity of the aircraft. The other two performance measures depend also on the ratio of the temperature at the turbine to the inlet temperature in the engine, T-3/T-i. An analysis of these expressions shows that it is not possible to choose an optimal set of values of r and T-3/T-i that maximize both the overall efficiency and thrust. We study how irreversibilities in the compressor and the turbine decrease the overall efficiency of jet engines and show that this effect is more pronounced for smaller T-3/T-i.

Optimal scheduling of aircrafts’ engines repair process

We address a real world scheduling problem concerning the repair process of aircrafts’ engines by TAP - Maintenance & Engineering (TAP-ME). TAP-ME is the maintenance, repair and overhaul organization of TAP Portugal, Portugal’s leading airline, which employs about 4000 persons to provide maintenance and engineering services in aircraft, engines and components. TAP-ME is aiming to optimize its maintenance services, focusing on the reduction of the engines repair turnaround time.

Scheduling aircraft’s engines repair process: a mathematical model

In this talk, we discuss a scheduling problem that originated at TAP - Maintenance & Engineering - the maintenance, repair and overhaul organization of Portugal’s leading airline. In the repair process of aircrafts’ engines, the operations to be scheduled may be executed on a certain workstation by any processor of a given set, and the objective is to minimize the total weighted tardiness. A mixed integer linear programming formulation, based on the flexible job shop scheduling, is presented here, along with computational experiment on a real instance, provided by TAP-ME, from a regular working week. The model was also tested using benchmarking instances available in literature.

Improving search engines with open Web-based SKOS vocabularies

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

Aircraft Engines Maintenance Costs and Reliability: An Appraisal of the Decision Process to Remove an Engine for a Shop Visit Aiming at Minimum Maintenance Unit Cost

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação.

BIOMedical search engine framework: lightweight and customized implementation of domain-specific biomedical search engines

The Smart Drug Search is publicly accessible at http://sing.ei.uvigo.es/sds/. The BIOMedical Search Engine Framework is freely available for non-commercial use at https://github.com/agjacome/biomsef

Targeted search engines for children : search user interfaces and information-seeking behaviour

Magdeburg, Univ., Fak. für Informatik, Diss., 2015

Competing engines of growth: Innovation and standardization

We study a dynamic general equilibrium model where innovation takes theform of the introduction of new goods whose production requires skilled workers.Innovation is followed by a costly process of standardization, whereby these newgoods are adapted to be produced using unskilled labor. Our framework highlightsa number of novel results. First, standardization is both an engine of growth anda potential barrier to it. As a result, growth is an inverse U-shaped function ofthe standardization rate (and of competition). Second, we characterize the growthand welfare maximizing speed of standardization. We show how optimal protection of intellectual property rights affecting the cost of standardization vary withthe skill-endowment, the elasticity of substitution between goods and other parameters. Third, we show that, depending on how competition between innovatingand standardizing firms is modelled and on parameter values, a new type of multiplicity of equilibria may arise. Finally, we study the implications of our model forthe skill-premium and we illustrate novel reasons for linking North-South trade tointellectual property rights protection.

Medical record search engines, using pseudonymised patient identity: an alternative to centralised medical records

Purpose The purpose of our multidisciplinary study was to define a pragmatic and secure alternative to the creation of a national centralised medical record which could gather together the different parts of the medical record of a patient scattered in the different hospitals where he was hospitalised without any risk of breaching confidentiality. Methods We first analyse the reasons for the failure and the dangers of centralisation (i.e. difficulty to define a European patients' identifier, to reach a common standard for the contents of the medical record, for data protection) and then propose an alternative that uses the existing available data on the basis that setting up a safe though imperfect system could be better than continuing a quest for a mythical perfect information system that we have still not found after a search that has lasted two decades. Results We describe the functioning of Medical Record Search Engines (MRSEs), using pseudonymisation of patients' identity. The MRSE will be able to retrieve and to provide upon an MD's request all the available information concerning a patient who has been hospitalised in different hospitals without ever having access to the patient's identity. The drawback of this system is that the medical practitioner then has to read all of the information and to create his own synthesis and eventually to reject extra data. Conclusions Faced with the difficulties and the risks of setting up a centralised medical record system, a system that gathers all of the available information concerning a patient could be of great interest. This low-cost pragmatic alternative which could be developed quickly should be taken into consideration by health authorities.

Cardan Gear Mechanism versus Slider-Crank Mechanism in Pumps and Engines

In machine design we always want to save space, save energy and produce as much power as possible. We can often reduce accelerations, inertial loads and energy consumption by changing construction. In this study the old cardan gear mechanism (hypocycloid mechanism) has been compared with the conventional slider-crank mechanism in air pumps and four-stroke engines. Comprehensive Newtonian dynamics has been derived for the both mechanisms. First the slidercrank and the cardan gear machines have been studied as lossless systems. Then the friction losses have been added to the calculations. The calculation results show that the cardan gear machines can be more efficient than the slider-crank machines. The smooth running, low mass inertia, high pressures and small frictional power losses make the cardan gear machines clearly better than the slider-crank machines. The dynamic tooth loads of the original cardan gear construction do not rise very high when the tooth clearances are kept tight. On the other hand the half-size crank length causes high bearing forces in the cardan gear machines. The friction losses of the cardan gear machines are generally quite small. The mechanical efficiencies are much higher in the cardan gear machines than in the slider-crank machines in normal use. Crankshaft torques and power needs are smaller in the cardan gear air pumps than in the equal slider-crank air pumps. The mean crankshaft torque and the mean output power are higher in the cardan gear four-stroke engines than in the slider-crank four-stroke engines in normal use. The cardan gear mechanism is at its best, when we want to build a pump or an engine with a long connecting rod (≈ 5⋅crank length) and a thin piston (≈ 1.5⋅crank length) rotating at high angular velocity and intermittently high angular acceleration. The cardan gear machines can be designed also as slide constructions without gears. Suitable applications of the cardan gear machines are three-cylinder half-radial engines for motorcycles, sixcylinder radial engines for airplanes and six-cylinder double half-radial engines for sport cars. The applied equations of Newtonian dynamics, comparative calculations, calculation results (tables, curves and surface plots) and recommendations presented in this study hold novelty value and are unpublished before. They have been made and written by the author first time in this study.

Cooling system optimization in medium-speed engines

Tässä työssä optimoidaan keskinopean Wärtsilä 32 -dieselmoottorin jäähdytysjärjestelmää ja tutkitaan taajuusmuuttajien käyttömahdollisuutta kiertopumppujen yhteydessä niin, että järjestelmässä saataisiin kiertämään vain kulloinkin tarvittava määrä vettä. Tutkimuksen mallinnus on toteutettu laatimalla aiemmin käytössä olleista yksinkertaisista simulointimalleista yksi malli, johon on sisällytetty sekä virtauksen että lämmönsiirron laskenta, jotka on aiemmin mallinnettu erillisillä ohjelmilla. Diplomityö on osa projektia, joka on tehty Sähkötekniikan osaston tutkijan Mikko Pääkkösen kanssa yhteistyössä. Tämän diplomityö keskittyy lähinnä virtausteknisiin ja lämmönsiirtoon liittyviin asioihin, kun taas sähkötekniikan osuus on esitetty Mikko Pääkkösen raportissa. Tulosten perustella voidaan sanoa, että taajuusmuuttajakäyttö kannattaa kiertopumppujen yhteydessä. Käyttämällä pumppujen virtaussäätöä voidaan jäähdytysjärjestelmästä jättää monia komponentteja, kuten termostaattiventtiilejä pois. Mallinnetut yksinkertaiset piiriratkaisut näyttävät toimivan ainakin yleisellä tasolla. Tutkimusta pumppujen säädöstä ja tässä projektissa luoduista jäähdytysjärjestelmäkonfiguraatioista kannattaa jatkaa.

Performance impact of the application of castor oil biodiesel in diesel engines

The use of renewable fuels, such as the biodiesel, can ease the demand of fossil fuel for the power generation and transportation fields in rural area. In this work, the performance impact of the application of castor oil biodiesel is evaluated with an automotive and a stationary diesel engine. The application of B20 and B10 biodiesel blends and pre-heated net biodiesel is considered. The viability of the employment of B10 and B20 blends to mobility and power generation was observed from dynamometric bench tests, where this blends performed similar to fossil diesel. With the pre-heated net biodiesel, however, a brake torque loss and a specific consumption increase were observed with relation to diesel fuel.

Value based pricing and marketing of marine engines

Objective of the thesis is to create a value based pricing model for marine engines and study the feasibility of implementing such model in the sales organization of a specific segment in the case company’s marine division. Different pricing strategies, concept of “value”, and how perceptions of value can be influenced through value based marketing are presented as theoretical background for the value based pricing model. Forbis and Mehta’s Economic Value to Customer (EVC) was selected as framework to create the value based pricing model for marine engines. The EVC model is based on calculating and comparing life-cycle costs of the reference product and competing products, thus showing the quantifiable value of the company’s own product compared to competition. In the applied part of the thesis, the components of the EVC model are identified for a marine diesel engine, the components are explained, and an example calculation created in Excel is presented. When examining the possibilities to implement in practice a value based pricing strategy based on the EVC model, it was found that the lack of precise information on competing products is the single biggest obstacle to use EVC exactly as presented in the literature. It was also found that sometimes necessary communication channels are missing and that there is simply a lack of interest from some clients and product end-users part to spend time on studying the life-cycle costs of the product. Information on the company’s own products is however sufficient and the sales force is capable to communicate to sufficiently high executive levels in the client organizations. Therefore it is suggested to focus on quantifying and communicating the company’s own value proposition. The dynamic nature of the business environment (variance in applications in which engines are installed, different clients, competition, end-clients etc.) means also that each project should be created its own EVC calculation. This is demanding in terms of resources needed, thus it is suggested to concentrate on selected projects and buyers, and to clients where the necessary communication channels to right levels in the customer organization are available. Finally, it should be highlighted that as literature suggests, implementing a value based pricing strategy is not possible unless the whole business approach is value based.